BaByliss PRO

BaByliss PRO FXONE Lo-Pro is an outlining clipper with a metal blade head featuring a very low profile and a 40 mm Blue Titanium T-blade, exposed on 360°. It is part of the FXONE system, with a battery interchangeable with the Lo-Pro hair clipper. It is for clean edges, hard lines, and detailing.

What it does for you

• See the line from any angle, with the fully exposed T-blade, zero-gap adjustable.
• Gentle and durable blade: Blue Titanium, described by the brand as hypoallergenic, with a lower operating temperature.
• Constant rhythm, with the high-torque, brushless digital motor, at 6800 RPM.
• Up to 3 hours of runtime after 2 hours of charging; the battery is changed with a button.
• Fits well in the hand, thanks to the very low-profile blade head and the ergonomic handle.

How to use it at home

1. Charge the battery on the included base and check the level on the 4-step LED ring.
2. Put a few drops of oil on the blade before use.
3. If you want a closer cut to the skin, adjust the zero-gap with the included tool and screwdriver.
4. Outline on dry hair, with the corner of the blade, in short movements.
5. After use, clean the hair with the brush, lubricate the blade, and put on the blade guard.

For what type of work

It is for outlining the neck and temples, the beard line, hard lines, and fine details. The standard tooth of the blade works on most skin types. It does not have guide combs, so for shortening hair you use the FXONE Lo-Pro hair clipper.

Specifications

What else you need

• BaByliss PRO 4-in-1 spray for blades
• Wahl oil for blades
• FXONE FXBB33E spare battery
• FXONE Lo-Pro hair clipper, the same battery
• Carbon finishing comb

ProBeauty tip. For straight lines on the neck, lightly support the little finger of the neck and move only the wrist. The hand remains stable, and the line does not get crooked.

The BaByliss PRO Boost+ GoldFX FX8700GBPBASE Charging Base is the charging stand for the Boost+ Gold clipper. It holds the clipper in a stable, upright position on the countertop and charges it using the adapter you already have for the clipper. The adapter is not included in the box.

What it does for you

• The clipper stands straight and secure on the countertop: the base is solid and balanced.
• Charge it without looking for the cable: place it on the base and charging begins.
• Use the clipper's adapter, without a separate power supply.
• Compatible with the entire FX8700 series with a hanging hook, not just the Gold model.
• Keep the clipper charged and visible on your workstation.

How to use it at home

1. Place the base on a flat, stable surface near an outlet.
2. Connect the clipper adapter to the base, then plug the adapter into the outlet.
3. Place the clipper in the base in an upright position and check that it is stable.
4. Place it back on the base after each client to keep it charged.
5. When moving the base, first unplug the adapter.

For what type of device

BaByliss PRO states that the base is designed for the Boost+ professional clipper and is compatible with the entire FX8700 series with a hanging hook. For Boost+ FX7870 series outline clippers, there is a separate FX7870GBPBASE base. Without the clipper adapter, the base does not charge.

Specifications

What else you need

• BaByliss PRO Boost+ Gold clipper, which the base is designed for
• BaByliss PRO FXPCGE set of 8 guards for FX8700
• BaByliss PRO charging base for the Boost+ Gold SkeletonFX outline clipper
• BaByliss PRO FX4in1 spray for blade maintenance

ProBeauty tip. Place the base on the side of your working hand, away from the edge of the countertop. This way, you can reflexively put it back between clients without snagging the adapter cable.

The BaByliss PRO SkeletonFX FX707G2ZE is a 40 mm gold titanium-coated T-blade with 2 mm deep teeth. Use it with the SkeletonFX FX7870, SnapFX FX797E, and LO-PROFX FX726 trimmers. It is designed for clean outlines, sharp lines, and detailing.

What it does for you

• Creates clean outlines and sharp lines thanks to its 2 mm deep teeth.
• Stays sharp longer: titanium is a hard, durable coating, according to the brand.
• Is gentler on sensitive skin because titanium has hypoallergenic properties.
• Cuts through thick or coarse hair when working on edges and details.
• Adjusts to a zero-gap setting for trimming very close to the skin.

How to use it at home

1. Turn off the trimmer.
2. Remove the old blade with a screwdriver.
3. Place the new blade on the trimmer and make sure it is positioned correctly, parallel to the housing.
4. Tighten the screws and turn on the trimmer for a few seconds to make sure it runs smoothly.
5. Clean and lubricate the blade regularly, before and during use, with BaByliss PRO 4-in-1 spray.

What type of trimmer it is for

It fits the SkeletonFX FX7870 trimmers, including Gold and Boost+ Gold, SnapFX FX797E, and LO-PROFX FX726, as well as other trimmers with a two-hole blade system. The brand recommends it for thick or coarse hair and less sensitive skin. It is not for hair clippers with a 45 mm blade.

Specifications

What else you need

• BaByliss PRO SkeletonFX Gold FX7870GE Trimmer
• BaByliss PRO Boost+ SkeletonFX Gold FX7870GBPE Trimmer
• BaByliss PRO 4-in-1 Blade Care Spray
• Wahl Blade Lubricating Oil, 100 ml

ProBeauty Tip. The FX707G2ZE maintains the gold appearance of the SkeletonFX Gold trimmer. Keep it on hand as a spare blade for sharp lines and beard trimming.

The BaByliss PRO Boost+ GoldFX Charging Base FX8700GBPBASE is the charging stand for the Boost+ Gold clipper. It holds the clipper in a vertical position on the countertop and charges it through the clipper adapter, which is not included.

Resealed product. It has been unsealed for inspection or display and may have minor signs of wear or handling. It is complete and functional, tested by us, and has the same warranty as a new product. It comes without the original box.

What it does for you

• The clipper stands upright and securely on the countertop because the base is solid and balanced.
• Charge it without looking for the cable: place the clipper on the base and charging begins.
• Use the clipper adapter; you do not need a separate power supply.
• Compatible with the entire FX8700 series with a hanging hook, not just the Gold model.
• Keep the clipper always in sight and charged at your workstation.

How to use it at home

1. Place the base on a flat, stable surface near an electrical outlet.
2. Connect the clipper adapter to the base, then plug the adapter into the outlet.
3. Place the clipper in the base in a vertical position and check that it is stable.
4. Leave it on the base between clients and at the end of the day so that it is charged for the next time.
5. When moving the base, first unplug the adapter.

For what type of device

BaByliss PRO states that the base is designed for the Boost+ professional clipper and is compatible with the entire FX8700 series with a hanging hook. For Boost+ outline clippers in the FX7870 series, the brand offers a separate FX7870GBPBASE base. Without the clipper adapter, the base does not charge.

Specifications

What else you need

• BaByliss PRO Boost+ Gold clipper, which the base is designed for
• BaByliss PRO FXPCGE set of 8 guide combs for the FX8700
• BaByliss PRO FX4in1 spray for blade maintenance
• Wahl oil for clipper blades

ProBeauty tip. Upon delivery, check that your FX8700 clipper has a hanging hook: this determines whether it will fit in the base. Then place the base away from the edge of the countertop so you do not snag the cable.

BaByliss PRO 4Artists GoldFX is an all-metal, gold-colored hair clipper with an EDM Technology motor developed in collaboration with Ferrari and a 45 mm Japanese steel blade. It works corded or cordless at the same power.

Resealed product. It has been unsealed for inspection or display and may show minor signs of wear or handling. It is complete and fully functional, tested by us, and comes with the same warranty as a new product. It does not include the original box.

What it does for you

• Skin-close fades with a 45 mm flat blade featuring a DLC and nickel-titanium coating and a very sharp V-shaped cutting angle.
• Consistent power with a high-torque digital motor that is electronically controlled, quieter, and produces less vibration.
• Smooth transitions between lengths with 5 settings: 0.8 – 1.4 – 2 – 2.8 – 3.5 mm.
• Eight fixed lengths with guide combs of 1.5; 3; 4.8; 6; 10; 13; 16 and 19 mm.
• Approximately 120 minutes of cordless use after 3 hours of charging.

How to use it at home

1. Before first use, charge it for 3 hours. The red LED flashes while charging and stays lit when the battery is fully charged.
2. Place the clipper in the charging stand only with the power switch set to 0.
3. Remove the blade guard, turn the clipper on, and hold it at a 45° angle. Apply 2 drops of oil to the blades, leave them for a few seconds, then blot away any excess.
4. Turn off the clipper, attach the guide comb, and press down on the back until it clicks.
5. The lever shortens the cut when moved up and lengthens it when moved down.
6. Finally, clean the blade with the brush and oil it. The guide combs can be rinsed, but dry them thoroughly.

What type of haircut it is best for

The brand recommends it for all hair types, for both classic haircuts and fades, outlining, and hair tattoos. For fine lines on the neck and beard, an outlining clipper with a T-shaped blade gives you more control.

Specifications

What else you need

• BaByliss PRO 4-in-1 Blade Spray
• Wahl Blade Oil
• Graphite Taper Blade FX803BME, for FX8700
• Set of 8 FXPCGE Guide Combs, for FX8700
• Wahl Hairdressing Cape

ProBeauty Tip. When the LED starts flashing during use, you have about 3 minutes left. Finish your cut and place the clipper in the charging stand; do not let the battery discharge completely.

The BaByliss PRO M4560E is a white haircutting cape that you place around the client's shoulders before cutting. It covers their clothes, and the cut hair falls onto the cape instead of their collar or t-shirt. Use it in the barbershop or at home when cutting a family member's hair.

What it does for you

• Clothes stay free of hair because the cape covers the shoulders and chest.
• You can immediately see dark hair against the white background, making it easier to brush off at the end.
• The client stays more comfortable without hair getting under their collar.
• The workspace looks clean and tidy, especially next to BaByliss PRO tools.

How to use it at home

1. Place the cape around the client's shoulders so that it covers their chest, shoulders, and back.
2. Fasten it around the neck without tightening it, leaving enough room for one finger between the collar and the skin.
3. Check that it covers the shoulders well before you turn on the clipper.
4. During the haircut, occasionally brush off the hair that has collected in the folds.
5. At the end, undo the fastening, gently gather the cape inward, and brush the hair away from the client.

For what type of work

It is suitable for clipper or scissor haircuts, in the barbershop or at home. Dark hair is clearly visible against the white background; with blonde or gray hair, the strands are harder to see and require careful brushing off at the end. The brand does not confirm that it is waterproof, so do not use it as protection when dyeing hair.

What else you need

• BaByliss PRO 4Artists Barber Towel
• Straight cutting comb
• Jaguar A-Line 505 tapered cutting comb
• BaByliss PRO FX4in1 blade maintenance spray

ProBeauty tip. Place a small towel or neck band under the collar when cutting short hair. The cape keeps hair off the clothes, but short hairs from the neck will still find their way under the collar.

The BaByliss PRO Boost+ SkeletonFX Chameleon is a metal-bodied outline trimmer with an iridescent finish and a 40 mm titanium T-blade with a 2.0 mm deep tooth. The blade is exposed 360°, so you can see the line from any position. It works corded or cordless.

What it does for you

• Very clean edges: the 2.0 mm deep tooth is designed for hard lines and sharp contours.
• Durable blade that stays sharp: titanium is hard and, according to the brand, hypoallergenic.
• See the blade at all times, and the zero-gap can be adjusted without removing it.
• Approximately 180 minutes cordless, with a 3300 mAh battery, charged in 4 hours.
• Secure grip, with a handle covered in diamond-textured rubber.

How to use it at home

1. Before first use, charge it for 4 hours. Maximum capacity is achieved after 4 charge and discharge cycles.
2. With the switch set to 0, put a drop of oil on the blades and wipe off the excess.
3. To charge, connect the plug to the base of the machine; the LED flashes, then stays lit when it is ready.
4. Trace the outline on dry hair, with the corner of the blade, in short strokes.
5. After use, clean with the brush, oil the blade and set the switch to 0.

For what type of work

It is for contours, the beard line, neck, temples and hard lines, especially on thick or coarse hair. If your skin is easily irritated, test it on a small area first: the deep tooth cuts more aggressively. It does not replace the hair clipper.

Specifications

What else you need

• BaByliss PRO 4-in-1 blade spray
• Wahl blade oil
• Titanium 2.0 FX707C2ZE replacement blade, 40 mm
• FX7870GBPBASE charging stand for SkeletonFX
• Boost+ Chameleon hair clipper
• Carbon finishing comb

ProBeauty tip. If you do not use it often, recharge it for 4 hours approximately every 6 months, as the manual requires. The 3300 mAh battery retains its capacity this way.

Attention! The product may have opened or damaged packaging and may show minor signs of use or small scratches that do not affect its functionality!

The BabylissPro Double Foil FX3 Black is the ideal choice for those looking for a cord-free professional shaver, perfect for a close and precise shave. Recognized by professionals as one of the best performing devices in the industry, this model combines advanced technology with practical design, offering a superior shaving experience, suitable for both personal use and salons.

Essential Features of BabylissPro Double Foil FX3 Black:

• Ultra-fast 10,000 RPM rotary motor – Ensures uniform and efficient cutting, suitable for any type of shave.
• Hypoallergenic double foil system made of gold and titanium – The ultra-thin foils follow the contours of the face and head, providing an irritation-free shaving experience.
• Durable lithium-ion battery – Offers up to 3 hours of cordless autonomy, with fast charging in just 3 hours.
• Automatic closing cap – The device automatically turns off when the cap is applied, for added safety and energy saving.

Benefits for users:

• Maximum comfort and precision – The ergonomic design and advanced technology ensure a close shave, without compromise.
• Total cordless mobility – Ideal for professionals and those who want flexibility, regardless of location.
• Easy battery monitoring – Four-level LED indicators clearly show the charge level, for optimal control.

Discover the BabylissPro Double Foil FX3 Black and enjoy a professional shaver with top performance! Available on Eternal.RO – order now and enhance your shaving experience with a superior quality product.

Attention! The product may have an opened or damaged packaging and may show minor signs of use or small scratches that do not affect its functionality!

Experience perfect hairstyles with BaByliss PRO Rollers 12, a professional set that combines excellent performance with versatility for all hair types. Whether used in a hair salon or at home, this set is ideal for creating defined and long-lasting curls.

Features:

• Ceramic coating: Ensures even temperature distribution for easy and long-lasting curling.
• Ideal for all hair types: The set includes 3 types of rollers of different sizes, suitable for long, medium, and short hair.
• Complete accessories: Comes with 12 clips in 3 different sizes and 12 pins for easy and stable use.

Technical Specifications:

• Roller type: Ceramic
• Number of rollers: 12 pcs
• Included accessories: 12 clips in 3 different sizes, 12 pins
• Storage box: Yes, included

Package includes:

• 12 professional ceramic rollers
• 12 clips in 3 different sizes
• 12 pins
• Storage box for easy organization and protection

Attention! The product may have opened or damaged packaging and may show minor signs of use or small scratches that do not affect its functionality!

Founded in 1961 in Paris, France, BaBylissPRO is a company that manufactures high-performance professional hair styling tools and accessories, dedicated to professionals. For over 50 years, BaBylissPRO has been producing innovative professional tools to inspire the creativity of professional hairdressers everywhere. BaBylissPRO tools encourage the evolving styles and trends in hairdressing and styling for professionals through the quality and performance of the products offered. Universal diffuser with two attachments for all BaBylissPRO hair dryers, except BaBylissPRO Vulcano and BaBylissPRO Murano. The universal diffuser diameter is min: 3.5cm, max: 6cm. The Babyliss Pro diffuser ensures faster drying, as the air distribution from the dryer is controlled.

Compatibility: NOT compatible with the following types of Babyliss dryers: BaByliss Pro Vulcano and BaByliss Pro Murano

BaBylissPRO High Performance 28mm Curling Wand effortlessly creates beautiful curls and natural-looking waves. The ceramic coating ensures even heat distribution and helps protect the hair from heat-related damage. With a 28mm diameter, this curling wand is ideal for creating medium to large curls, delivering a natural, voluminous finish. The ergonomic handle ensures comfortable use, while rapid heat-up saves valuable styling time. Suitable for all hair types and lengths.

Key Features

• Ceramic coating for even heat distribution
• 28mm diameter for natural curls and beach waves
• Fast heat-up for efficient styling
• Ergonomic handle for enhanced comfort
• Helps protect hair from overheating
• Suitable for all hair types
• Professional results at home

Attention! The product may have opened or damaged packaging and may show minor signs of use or small scratches that do not affect its functionality!

Top performance, absolute precision, and total freedom! With the new BaByliss PRO FXONE Shaver FX79FSMBE, personal care reaches a superior level – a professional shaver, designed for those who demand impeccable results with every use.

Equipped with a lithium battery compatible with all FXONE devices, this appliance is part of a revolutionary ecosystem from BaBylissPRO. You only need one battery for all tools in the FXONE range – an intelligent solution for dynamic professionals passionate about efficiency.

The FXONE shaver offers an ultra-smooth shave with millimeter precision and a compact, ergonomic design that fits perfectly in the palm of your hand. The high-performance shaving head glides gently over the skin, reducing irritation and providing an impeccable finish – ideal for contours, fine details, and daily beard or scalp maintenance.

What the complete set contains:
– FXONE shaver with elegant housing, matte black finish
– Interchangeable lithium battery, compatible with all FXONE devices
– Charging stand included – compact, stable, and easy to use

Benefits:
– 100% compatibility with all FXONE tools
– Long-lasting battery with consistent performance
– Ergonomic design, ideal for professional or personal use
– Quick response to the needs of modern barbers – versatility, comfort, and power in one product

BaByliss PRO FXONE is not just a shaver – it's a top-tier technological experience, where every detail is designed for performance, comfort, and precision.

Attention! The product may have an opened or damaged packaging and may show minor signs of use or small scratches that do not affect its functionality!

With BabylissPro 3D Wave 19mm, get natural and voluminous curls in record time! This multifunctional triple curler is designed to create long-lasting curls with a professional finish and an elegant look, thanks to its 3 heating elements that allow for faster and more efficient curl formation.

Key Features:

• 19mm Titanium-Tourmaline Technology – Ensures quick and efficient heating, protecting hair and giving it a natural shine.
• Ionic Technology – Eliminates static electricity, leaves hair silky, and combats frizz.
• Digital Temperature Control – 5 temperature settings, from 150°C to 210°C, perfect for all hair types.
• High Heat for Lasting Curls – Suitable for medium and long hair, for a uniform and durable result.
• 2.7 m Professional Cable – Provides freedom of movement during styling.

Why choose BabylissPro 3D Wave 19mm?

• Voluminous and Natural Curls – The triple curler is specially designed to provide a natural look and long-lasting hold.
• Easy to Use – The ergonomic design and evenly distributed heat make styling simpler and faster, even for long hair.
• Professional Performance at Home – Perfect for salons and personal use, delivering quality results without compromise.

Transform your hair with BabylissPro 3D Wave 19mm, the ideal choice for elegant curls and volume, every time!

Attention! The product may have opened or damaged packaging and may show minor signs of use or small scratches that do not affect its functionality!

Transform your hairstyle with BabylissPro Triple Barrel 22mm/19mm/22mm, the professional triple curling iron specially designed for defined curls and long-lasting waves. Thanks to its three heating barrels and advanced technology, this curling iron is perfect for impactful hairstyles, without the risk of hair damage.

Key features:

• 3 heating barrels (22mm/19mm/22mm) – Ideal for voluminous curls and effective waves that last all day.
• Adjustable temperature control (140°C - 220°C) – Suitable for all hair types, offering protection and personalized styling.
• Automatic shut-off function after 60 minutes – Enhanced safety, ideal for intensive use in the salon or at home.
• Insulated tip and 2.7m swivel cord – The secure handle and rotating cord offer comfort in use and increased maneuverability.

Benefits of BabylissPro Triple Barrel:

• Long-lasting and natural curls – Creates long-lasting waves, keeping hair smooth and shiny.
• Ideal for professionals and personal use – Advanced temperature control and ergonomic design ensure professional results with every use.
• Accessories included for protection and comfort – The set includes heat-protective gloves and a heat-insulating mat for safe styling.

Discover the BaByliss PRO SnapFX Cordless Clipper - Professional Performance at Your Fingertips

The BaByliss PRO SnapFX clipper is the ideal high-performance tool for achieving professional haircuts, whether you're at home or in a salon. Combining advanced technology with an ergonomic design, this clipper allows you to create precise and uniform hairstyles with ease and comfort.

Key Features:

• Powerful Brushless Motor: Equipped with a digital brushless motor, this clipper offers a powerful torque of 6800RPM, ensuring power and speed for precise and efficient cuts.
• Fast Charging and Dual Battery System: The two lithium-ion batteries fully charge in just 3 hours when placed together on the charging stand. Additionally, a single battery charges in just 2 hours, ensuring you'll never run out of power. Each battery provides 2 hours of runtime, guaranteeing continuous and uninterrupted operation.
• Robust and Ergonomic Design: The robust metal construction is built to last, while the ergonomic and balanced design provides a perfect grip and excellent control.
• High-Precision DLC Fade Blade: The sharp black DLC blade is ideal for fades and precise cuts. Adjustable to zero gap and equipped with a smart opening system, it allows for quick and easy maintenance.

Benefits of the BaByliss PRO SnapFX Clipper:

• Power and Speed: The digital brushless motor delivers superior performance, ensuring fast and precise cuts for any hair type.
• Unlimited Runtime: Thanks to the dual interchangeable battery system, you will benefit from continuous, uninterrupted runtime. One battery charges while the other is in use, giving you a worry-free clipping experience.
• Ergonomic and Durable Design: The robust and ergonomic construction offers comfort and long-term durability, making it ideal for intensive daily use.
• Maximum Versatility: With a complete set of comb attachments and an adjustable blade, this clipper is perfect for any haircut style, from classic cuts to complex fades.

Technical Specifications:

• Runtime: Each battery provides 2 hours of use.
• Charging Time: 2 hours for a single battery, 3 hours for both batteries on the charging stand.
• Fade Blade: Adjustable to zero gap, with smart opening system for easy maintenance.
• Battery System: Two interchangeable lithium-ion batteries.
• Light Indicator: Light ring for battery charge level (solid blue for full battery, flashing blue for low battery, flashing red for almost discharged battery).
• Adjustment Lever: 5 detent cutting positions: 0.8, 1.4, 2, 2.8, 3.5mm.
• Metal Construction: Robust, ergonomic, and balanced design, with a textured cylindrical handle for a perfect grip.
• Comb Attachment Set: 8 premium comb attachments (0.5, 1, 1.5, 2, 3, 4, 5, 6mm) with fiberglass for durability and metal clips for secure fastening.

Purchase the BaByliss PRO SnapFX

Unleash your creativity and showcase your talent with the BaByliss PRO SnapFX. Exceptional cutting performance and unlimited runtime take the art of hairdressing to the next level. Don't miss the opportunity to offer your clients the best results and elevate your services to a superior professional level.

The BaByliss PRO M4053E Barber Towel is the essential towel for the barber station. Use it to prepare the beard before edging or shaving and to clean up after a cut. It is a simple accessory that complements the BaByliss PRO tools on your table.

What it does for you

• Prepares the beard before edging or shaving, as recommended by the official distributor.
• Keeps the client's neck clean by wiping away cut hair after each pass.
• Protects the collar if placed on the shoulders under the cape.
• Completes the workstation alongside the shaver and edger.

How to use it at home

1. Place the towel on the client's shoulders under the cape before cutting.
2. For the beard, use it to prepare the area before edging or shaving.
3. Between passes, gently wipe cut hair from the neck and cheeks.
4. After each client, put the towel in the wash and use a clean one.
5. Wash it according to the instructions on the label and let it dry completely.

For what type of work

It is suitable for barbers and those who cut or style their beards at home. It does not replace the cutting cape but complements it. If you need towels for dyeing, choose ones that you do not mind getting stained.

What else you need

• BaByliss PRO FX3 Double Foil Shaver
• SkeletonFX GoldFX Edger
• Wahl Cutting Cape
• BaByliss PRO 4-in-1 Blade Spray

ProBeauty Tip. Keep at least two towels at the station, one for the beard and one for the neck. This prevents cut hair from getting back on the client's face.

BaByliss PRO FX8700GBASE is a charging base for metal FX clippers with a hanging ring: ChameleonFX FX8700IE, RedFX FX8700RE, and BlackFX FX8700BKE. The brand designed it for barbers who don't hang up their clippers. It keeps the clipper upright on the counter and charges it using the adapter supplied with the clipper.

What it does for you

• The clipper no longer falls off the counter: the base is solid, balanced, and stable.
• It stands upright and securely while charging.
• You charge it easily, without hanging it or leaving it lying down next to the cable.
• Your clipper is always charged and within reach at your workstation.

How to use it at home

1. Check the list below to make sure your clipper is a compatible model.
2. Place the base on a flat, stable surface near an outlet.
3. Connect the adapter supplied with the clipper, then plug it in.
4. Place the clipper in the base, upright, and check that it stands securely.
5. When moving the base, first unplug the adapter.

For what type of device

BaByliss PRO lists it as compatible only with the FX clippers with a hanging ring: ChameleonFX FX8700IE, RedFX FX8700RE, and BlackFX FX8700BKE. The GoldFX FX8700GE clipper and Boost+ clippers are not listed by the brand; separate bases are available for the Boost+. It is not designed for edgers.

Specifications

What else you need

• BaByliss PRO FXPCGE 8-piece guard set for FX8700
• BaByliss PRO FX4in1 blade maintenance spray
• Wahl clipper blade oil
• BaByliss PRO M3969E magnetic mat for your workstation

ProBeauty tip. Before ordering, check the code on your clipper's label: the base is listed only for FX8700IE, FX8700RE, and FX8700BKE. If you have a different FX8700 clipper, look for the base designed for it.

BaByliss PRO Graphite Taper FX803BME is a 45 mm replacement blade for FX8700, LO-PROFX FX825, and SnapFX FX895E clippers. The blade has a crescent shape that supports a natural back-and-forth motion when cutting. It is suitable for fades and clean finishes.

What it does for you

• Makes fades easier: the crescent shape follows the back-and-forth motion of your hand.
• Cuts cleanly and precisely across its entire 45 mm width.
• Heats up less: the graphite coating reduces friction and keeps the blade at a lower temperature.
• Is highly durable, as the graphite is a very durable coating, according to the brand.
• Can be adjusted to zero-gap for very short cuts.

How to use it at home

1. Turn off the clippers and raise the fine adjustment lever on the left to the top position.
2. Loosen the screws with a screwdriver and set them aside.
3. Gently lift the old moving blade and replace it with the new one on the oscillator.
4. Install the new fixed blade and center the moving blade parallel to it to avoid the risk of injury.
5. Reattach the screws.
6. Clean and maintain the blade regularly with BaByliss PRO 4-in-1 spray, as recommended by the brand.

For which type of clipper

It fits clippers from the FX8700 series (ChromFX, Boost+), LO-PROFX FX825, and SnapFX FX895E, as well as other clippers with a 2-hole blade system. It is not for SkeletonFX trimmers, which use 40 mm T-blades.

Specifications

What else you need

• BaByliss PRO Boost+ Metal Gold FX8700GBPE Clippers
• BaByliss PRO SnapFX FX895E Clippers
• BaByliss PRO 4-in-1 Blade Care Spray
• Wahl Blade Lubricating Oil, 100 ml

ProBeauty Tip. Let your wrist follow the curve of the blade: use short, arcing, bottom-to-top motions. This way, you make full use of the crescent shape without pressing the clipper against your head.

BaByliss PRO Graphite Fade FX8010BME is a 45 mm graphite-coated replacement fade blade for hair clippers in the FX8700 and LO-PROFX FX825E series. The cutting surface is flat and elongated, designed for vertical movement. It is ideal for fades and clean cuts.

What it does for you

• Cuts cleanly and precisely across its entire 45 mm width.
• Glides very smoothly: the graphite coating creates very little friction.
• Does not overheat because the blade operates at a lower temperature.
• Makes a quieter sound when cutting, according to the brand.
• Highly durable, as graphite is a very resilient coating.

How to use it at home

1. Turn off the hair clipper and set the fine adjustment lever on the left to the top position.
2. Loosen the screws with a screwdriver and set them aside.
3. Lift the old moving blade slightly and replace it with the new one on the oscillator.
4. Place the new fixed blade with the moving blade centered and parallel to it to avoid injury.
5. Secure the screws back in place.
6. Clean and maintain the blade regularly with BaByliss PRO 4-in-1 spray before and during use.

For which type of clipper

It fits hair clippers in the FX8700 (ChromFX, Boost+) and LO-PROFX FX825E series, as well as other clippers with a 2-hole blade system. It is not designed for SkeletonFX trimmers, which use 40 mm T-blades.

Specifications

What else you need

• BaByliss PRO Boost+ Metal Gold FX8700GBPE Hair Clipper
• BaByliss PRO ChromFX FX8700E Hair Clipper
• BaByliss PRO 4-in-1 Blade Care Spray
• Wahl Blade Lubricating Oil, 100 ml

ProBeauty Tip. If you cut many clients in a row, the graphite blade stays cooler, but it still needs spray between clients: spray it, let the clipper run for a few seconds, and wipe off the excess.

The BaByliss PRO M1344E Hair Straightener Case is where you keep your hair straightener between uses. It keeps it safe from dust and bumps, whether in a drawer or in your luggage. It is a storage accessory: it does not cool the straightener and does not replace the heat pad.

What it does for you

• The straightener stays protected from dust between uses.
• The plates won't get scratched by other objects in the drawer or bag.
• It's easy to take with you on trips, without having to figure out how to pack it.
• The cord and straightener stay together, ready to use next time.

How to use it at home

1. After styling, turn off the straightener and unplug it.
2. Let it cool completely on a heat-resistant surface.
3. Close the plates and lock them with the locking system, if the straightener has one.
4. Neatly coil the cord without bending it where it exits the straightener.
5. Place the straightener in the case and keep it in a dry place.

For what type of device

For hair straighteners, according to the product name. The brand does not publish the case dimensions, so we cannot guarantee that every model will fit. If you have a wide straightener, over 30 mm, write us the model and we will check before you order.

What else you need

• BaByliss PRO Elipsis 3000 Professional Hair Straightener
• BaByliss PRO Elipsis 3100 Hair Straightener
• Osis+ Flatliner Heat Protection Serum

ProBeauty Tip. The cord most often breaks where it exits the straightener. When you put the straightener in the case, make a loose loop with the cord, do not wrap it tightly around it.

The BaByliss PRO Power Definer FX672ME is a replacement blade sold for the BaByliss PRO FX672E Power Definer clipper. Out of the box, the FX672E comes with a 45 mm stainless steel blade that has been diamond-sharpened. When the blade no longer cuts cleanly, you replace it, and the clipper works like new again.

What it does for you

• It restores a clean cut, without pulling hairs or leaving them uncut.
• It extends the life of your clipper: you only replace the worn blade, not the entire device.
• It saves you a trip to the service center, because you can install it yourself.
• It preserves the clipper's length settings, provided you install the blades correctly aligned.

How to use it at home

1. Turn off the clipper and unplug it or remove it from the charging stand.
2. Release the old blade as shown in the clipper's manual, and remove the old set.
3. Position the new set with the moving blade centered and parallel to the fixed blade, then secure it in place.
4. Apply a few drops of oil to the teeth.
5. Turn on the clipper for a few seconds and check the cut on a test strand of hair.

For which type of device

It is sold for the BaByliss PRO FX672E Power Definer clipper, an older model, corded or cordless. We did not find a BaByliss PRO data sheet that lists other compatible models, so if you have a different clipper, write us the code before ordering.

What else you need

• BaByliss PRO 4-in-1 Blade Care Spray
• Wahl Oil for lubricating blades, 100 ml
• Wahl Blade Ice Spray for cooling and cleaning blades

ProBeauty Tip. Because the FX672E is an older model, keep the old blade until you check that the new one cuts cleanly. Lubricating it after every day of use extends its life.

BaByliss PRO FX801JE is a taper replacement blade for the BaByliss PRO FreshFX clipper. It is made of Japanese steel with a PVD coating and has a crescent-shaped profile. Use it when your clipper blade has become dull, is pulling hair, or has been damaged.

What it does for you

• Your clipper cuts cleanly again, without pulling hair.
• Follows the movement of your hand: the crescent profile helps with the outward motion used for transitions.
• Resists wear and corrosion thanks to the Japanese steel and PVD coating.
• Suitable for fades, transitions, and clipper-over-comb cutting.

How to use it at home

1. Check your clipper model: the blade is for the BaByliss PRO FreshFX.
2. Turn off the clipper and remove it from the charger.
3. Unscrew the old blade and use the brush to remove all hair from underneath.
4. Position the new blade, align the moving blade with the fixed one, and tighten the screws without forcing them.
5. Apply 2 or 3 drops of oil to the blade and run the clipper for a few seconds.

For which clipper

For the BaByliss PRO FreshFX clipper. If you have another FX series model and want to install it on that, write us your clipper code before ordering and we will confirm if it fits.

Specifications

What else you need

• BaByliss PRO FreshFX clipper
• Blade oil
• Wahl Blade Ice spray for cooling the blades

ProBeauty tip. After installation, check the alignment: the moving blade should sit slightly behind the fixed one across its entire width. If it protrudes forward, the clipper will scratch the skin.

The BaByliss PRO Styler is a hair straightener with 28 × 110 mm floating EP Technology plates, an ion generator, and 5 temperature settings between 150 and 230 °C. It has a curved profile, so it straightens hair and also creates curls or waves. It is for you if you want a single iron for straight hair, waves, and curls.

What it does for you

• Glides easily through hair: the EP Technology plates distribute heat evenly and reduce friction.
• Reaches close to the roots with floating edge-to-edge plates, and smooths hair in fewer passes.
• Reduces static and frizz with its ion generator.
• Heats up quickly: it heats up in 25 seconds with its ceramic heating element.
• Creates both curls and waves thanks to its curved profile.
• Shuts off automatically after 20 minutes.

How to use it at home

1. Use only on completely dry, combed hair with a heat protectant applied.
2. Choose the temperature: 150 or 170 °C for fine or bleached hair, 190 °C for normal hair, and 210 or 230 °C for thick, coarse hair.
3. Divide the hair into sections and secure them with clips.
4. To straighten, pass the iron slowly once from the roots to the ends.
5. For curls, take a section, twist the iron half a turn, and slowly pull it toward the ends.
6. Place it on the heat-resistant mat included in the package until it cools down.

For what hair type

It works on all hair types because you can choose from 5 temperature settings. The 28 mm width is convenient for short, medium, and long hair. If you have very long and thick hair, the 38 mm Styler Wide covers more hair in a single pass.

Specifications

What else you need

• Wella EIMI Thermal Image Heat Protectant Spray
• Hair clips
• Olivia Garden NanoThermic Paddle Flat Brush

ProBeauty tip. For curls that last, let the section cool in your palm for a few seconds before releasing it.

The BaByliss PRO Poderoso is a 2400 W hair dryer with a long-lasting digital motor and a Turbo function that increases the air speed to 186 km/h. It weighs 400 g and comes with 3 nozzles, a diffuser, and a noise reducer. It's for you if you have long or thick hair and want to dry it quickly without a heavy device in your hand.

What it does for you

• Dries quickly: 186 km/h, 96.5 m³/h airflow, and 1804 Pa pressure.
• Gives you an extra boost when you're in a hurry, with the Turbo function, activated with a button.
• Doesn't tire your hand: 400 g and 200 mm long, with a compact and balanced body.
• Reduces frizz and leaves hair shiny, thanks to ionic technology.
• Works more quietly, with the noise reducer included.
• Does both curls and smooth brushing: 150 mm diffuser with a locking system and 3 concentrator nozzles.

How to use it at home

1. Towel-dry your hair and apply heat protection to the lengths.
2. Choose one of the 2 speeds and 3 temperatures. For fine hair, start on the low setting.
3. Dry the roots first, then attach the appropriate nozzle: the 6 × 75 mm one for wide sections, the 4 × 70 mm one for precise work.
4. Work on sections, with the brush, directing the air from the roots to the ends.
5. For curls, attach the diffuser and dry on low speed, without pulling the hair with your hand.
6. Set the shape with cool air. The button can be locked, so you don't have to keep it pressed.
7. Regularly clean the removable filter on the back.

For what type of hair

It works on all hair types, because you adjust the speed and temperature separately. You'll feel it most on long, thick, or hard-to-dry hair, where the Turbo function shortens the time. For curly hair, you have the diffuser in the package.

Specifications

What else you need

• Wella EIMI Thermal Image heat protection spray
• Olivia Garden Expert Blowout Shine 55 mm round brush, for long hair
• Olivia Garden Expert Blowout Shine 35 mm round brush
• Hair clips

ProBeauty tip. Keep the Turbo function for the beginning, when the hair is wet. Towards the end, switch to low speed and cool air, to close the cuticle and preserve the shine.

The BaByliss PRO BABD12E is the diffuser for the Rapido and Stellato hair dryers, also recommended by the brand for the Vulcano HQ and Murano. Attach it to the dryer when you want to dry and style curly or wavy hair without disrupting the curls. It distributes heat evenly for fast yet gentle drying.

What it does for you

• Preserves your defined curls, as the air is dispersed rather than delivered in a concentrated jet.
• Adds volume if you gently lift the hair away from the scalp with the diffuser.
• Dries evenly by distributing heat over a large surface area.
• Replaces a lost diffuser for the Stellato or Vulcano HQ.

How to use it at home

1. Turn off the dryer and remove the concentrator nozzle.
2. Attach the diffuser to the end of the dryer until it is securely in place.
3. Apply a curl-defining and heat-protective foam to damp hair.
4. Turn the dryer on at a low speed and medium heat setting.
5. Place the lengths of hair into the diffuser, slowly bring it close to the scalp, and hold it for a few seconds before moving it to another section.
6. Finally, set the curls with cool air and remove the diffuser once it has cooled.

For which model

This page lists the BaByliss PRO as compatible with the Rapido (BAB7000IE) and Stellato Digital (BAB7500IE). On the previous European website, the brand also recommended it for the Murano and Vulcano HQ (BAB6980IE). For the Excess HQ, Caruso HQ, and Levante, the brand recommends a different diffuser, the BABD11E.

What else you need

• The BaByliss PRO Vulcano HQ hair dryer, for which the brand recommends this diffuser
• Wella EIMI Boost Bounce curl-defining foam
• Olivia Garden Fingerbrush detangling brush, for detangling wet curly hair

ProBeauty tip. Detangle curly hair while it is still wet and do not touch it again after attaching the diffuser. The curls will form on their own in the fingers.

BaBylissPRO LO-PROFX Single Foil Replacement Foil is an original replacement set designed for the professional BaBylissPRO LO-PROFX Compact Foil Shaver.

Package Contents

• 1 replacement shaving head with foil (Single Foil)

• 1 cutting blade (Foil Cutter)

Ideal for maintaining the shaver's optimal performance, providing a precise, comfortable, and efficient shave. This original BaBylissPRO replacement set helps preserve the quality and durability of the shaver for both professional and personal use.

BaBylissPRO FX8022BE – MIM Fade Black Titanium Replacement Blade for Clippers

The BaBylissPRO FX8022BE MIM Fade Black Titanium Replacement Blade is designed for professional BaBylissPRO clippers and is the ideal choice for barbering techniques that require precision, control, and an ultra-close finish. Its Fade Blade design makes it easier to create fades, clean transitions, and short haircuts with enhanced definition.

The blade is made from Black Titanium and features MIM (Metal Injection Molding) technology, a manufacturing process that delivers exceptional durability and precision for intensive professional use. The angled cutting surface enables ultra-precise cutting, while the reduced contact surface helps maintain a lower temperature during use.

The BaBylissPRO FX8022BE replacement blade also features an integrated oil reservoir, designed to provide consistent lubrication and smoother operation. The S-Wave design guides hair more efficiently toward the blade, improving hair feeding and cutting performance.

Thanks to its advanced features, this blade is especially recommended for barbers, hairstylists, and users performing fades, very short haircuts, and precision work.

Key Features

• BaBylissPRO replacement blade for professional clippers

• Product code: FX8022BE

• Blade type: Fade Blade

• Material: Black Titanium

• MIM (Metal Injection Molding) technology

• Optimized cutting angle for maximum precision

• Reduced contact surface for lower operating temperature

• Integrated oil reservoir for consistent lubrication

• High resistance to wear

• S-Wave design for more efficient hair guidance toward the blade

• Can be adjusted to Zero Gap

• Blade width: 45 mm

Compatibility

Compatible with the following BaBylissPRO clipper models:

• FX829E

• FX899GE

• FX899MBE

• FX8700GBPE

• FX8700IBPE

• FX8700RBPE

• FX8700E

• FX820E

• FX86E

We recommend checking your clipper's exact model number before purchasing a replacement blade to ensure compatibility.

What Haircuts Is It Recommended For?

The BaBylissPRO FX8022BE is ideal for:

• Fades

• Skin fades

• Very short haircuts

• Precision work

• Removing weight lines

• Smooth transitions between different hair lengths

The specially designed Fade Blade allows for cleaner transitions between darker and lighter areas of the haircut, contributing to professional-looking, well-defined results.

Use & Maintenance

Install the blade according to the manufacturer's instructions and check that it is securely fitted before use. If adjusting to Zero Gap, proceed carefully to avoid excessive blade contact with the skin.

For optimal performance:

• Clean the blade after each use.

• Remove any accumulated hair.

• Apply clipper oil regularly.

• Store the clipper in a clean, dry place.

Proper maintenance helps preserve the blade's sharpness, reduce friction, and extend its lifespan.

Choose the BaBylissPRO FX8022BE MIM Fade Black Titanium Replacement Blade for professional performance, maximum precision, and impeccable results on every fade and technical haircut.

BaByliss PRO FX707SE is a Japanese steel T-blade replacement, sold for the BaByliss PRO FreshFX FX76E trimmer. As the brand states, the FX76E comes from the factory with a Japanese steel T-blade, adjustable to zero-gap, for fine details. When the blade gets dull, you replace it and get back to clean contours.

What it does for you

• It brings back clean contours when the old blade no longer cuts on the first pass.
• Works precisely on details, thanks to the T-blade shape.
• Can be adjusted to zero-gap, for trims very close to the skin.
• Keeps your device in use: you only replace the worn blade, not the entire trimmer.

How to use it at home

1. Turn off the device and remove it from the charger.
2. Release the old blade, as shown in the device manual, and remove the blade.
3. Place the new blade, with the moving blade centered and parallel to the fixed blade.
4. Secure the blade in place and put a few drops of oil on the teeth.
5. Turn on the device for a few seconds and check on a small area that it cuts cleanly.

For what type of device

It is sold for the BaByliss PRO FreshFX FX76E trimmer. We have not yet found a BaByliss PRO data sheet that lists the models compatible with this code. If you have a SkeletonFX FX7870, choose FX707ZE or FX707ZGSE, whose compatibility is published by the brand.

What else you need

• BaByliss PRO 4-in-1 Spray for blade maintenance
• Wahl Oil for lubricating the blades, 100 ml
• Wahl Blade Ice Spray for cooling and cleaning the blades

ProBeauty Tip. If you are not sure what device you have, look for the code on the label under the casing and send it to us before ordering. For T-blades, a few millimeters of difference make the blade unusable.

BaByliss PRO FreshFX is a 167 g cordless outline trimmer with a fully exposed 40 mm Japanese steel T-blade. The DC motor runs at 6800 RPM, and the blade is zero-gap adjustable for cutting very close to the skin. The brand makes it for all experience levels.

What it does for you

• See the line you cut, because the T-blade is fully exposed.
• Close-to-skin cut, with zero-gap adjustment made with the included kit and screwdriver.
• Clean lines, with the standard 1.6 mm tooth and over a million cutting strokes per minute.
• Relaxed hand: it weighs only 167 g and has a non-slip handle, with finger and thumb support.
• Up to 90 minutes cordless, and 20 minutes of charging gives you 20 minutes of work.

How to use it at home

1. Charge it via the USB-C port on the base. The LED flashes while charging and stays lit when it's ready.
2. Put a drop of oil on the face and sides of the moving blade and wipe off the excess with a soft cloth.
3. For zero-gap, loosen the screws, push the moving blade with the tool until it reaches the level of the fixed blade or slightly below it, then tighten them.
4. Trace the outline on dry hair, with the corner of the blade, in short strokes.
5. At the end, clean the hair with the brush, oil the blade and put on the cap.

For what type of work

It is for outlines, shapes and details: neck, temples, beard line, fine lines. It is a good choice if you are just learning to outline at home. Do not cut the hair all over the head; for that you use the FreshFX clipper.

Specifications

What else you need

• BaByliss PRO 4 in 1 blade spray
• Wahl blade oil
• FreshFX FX86E clipper
• Carbon finishing comb
• Wahl cutting cape

ProBeauty tip. After zero-gap adjustment, pass the blade once lightly over the back of the hand. If you feel a scratch, the moving blade is sticking out over the fixed one and needs to be adjusted again.

The BaByliss PRO Vero is a 2000 W hair dryer made in Italy, with an AC motor and ionic technology. It has an aerodynamic shape and a slim, easy-to-hold handle, and the air comes out at 138 km/h. It is for you if you want a simple and reliable salon dryer for everyday drying.

What it does for you

• Dries quickly: 2000 W AC motor and 138 km/h air.
• Leaves hair smooth and shiny, with less frizz, thanks to ionic technology.
• Easy to hold: 460 g, slim handle, and balanced design.
• Gives you a smooth finish, with the 6 × 75 mm concentrator nozzle.
• Sets the hairstyle with the cool air setting.
• Easy to maintain: the filter is removable for cleaning.

How to use it at home

1. Towel-dry your hair and apply heat protection to the lengths.
2. Dry the roots without the nozzle, on high speed and medium heat.
3. Attach the 6 × 75 mm nozzle and divide the hair into sections secured with clips.
4. Run the round brush through each section, directing the air from the roots to the ends.
5. On the low speed setting, you can work more precisely on the bangs and temples.
6. Set the style with cool air, then unplug the dryer and clean the filter.

For what hair type

It works on all hair types, for daily drying and smooth blow-drying. With 3 heat settings, you can use it gently on fine hair. It does not include a diffuser in the brand's range, so if you have curly hair and want to dry your curls, a model with an included diffuser, such as Falco or Lupia, will suit you better.

Specifications

What else you need

• Olivia Garden Ceramic+Ion SpeedXL 45 Round Brush
• Wella EIMI Thermal Image Heat Protection Spray
• L’Oréal Professionnel Flex Blowdry Leave-in Cream, with heat protection
• Hair clips

ProBeauty tip. Finish each blow-dry with a few seconds of cool air on each section. Cool air sets the style and adds shine.

BaByliss PRO FreshFX is a cordless clipper with a 45 mm Japanese steel blade and a 6800 RPM DC motor. It is lightweight, weighing 275 g, and is designed for all experience levels. Charge it via USB-C.

What it does for you

• Uniform cutting with a corrosion-resistant Japanese steel blade and over 500,000 cutting strokes per minute.
• Control the length with a 5-position lever: 0.5 – 1.4 – 2.3 – 3.2 – 4.2 mm.
• Basic lengths with 8 guide combs included.
• Up to 120 minutes of cordless use, with 20 minutes of charging providing 20 minutes of cutting time.
• Won't slip from your hand: the handle is non-slip, with finger and thumb support.

How to use it at home

1. Charge it via the USB-C port on the base. The LED flashes while charging and stays lit when the battery is full.
2. Hold the clipper blade-down, away from your body, and put a drop of oil on the face and sides of the moving blade.
3. With the clipper turned off, place the comb on the blade face, slide it on, and press the back until it clicks.
4. Cut clean, dry, detangled hair. Moving the lever up shortens the cut, while moving it down lengthens it.
5. At the end, remove the combs and rinse them, then dry them thoroughly. Clean the blade with the brush and lubricate it.

For what type of haircut

It is suitable for short and medium haircuts, touch-ups, and your first fades if you are just learning to cut hair. For fine detailing around the neck and beard, its companion is the FreshFX trimmer.

Specifications

What else you need

• BaByliss PRO 4-in-1 blade spray
• Wahl blade oil
• FreshFX FX76E trimmer
• Straight cutting comb
• Wahl haircutting cape

ProBeauty tip. If you are just learning, start with the longest comb and gradually move down. It is easier to shorten it again than to fix a cut that is too short.

BaByliss PRO SkeletonFX FX707ZGSE is a 40 mm T-blade replacement made from Japanese steel for the SkeletonFX GunSteel FX7870GSE trimmer. It features standard 1.6 mm teeth for clean cuts on any hair texture. It is also compatible with other FX7870 models, the SnapFX FX797E, and the LO-PROFX FX726.

What it does for you

• Cleanly trims edges, details, and shapes with its 40 mm T-blade.
• Cuts powerfully and stays sharp: Japanese steel is a durable metal with excellent cutting power.
• Resists rust and corrosion, according to the brand.
• Works on any hair texture and suits all skin sensitivities thanks to its standard teeth.
• Adjusts to a zero-gap setting for trims very close to the skin.

How to use it at home

1. Turn off the trimmer and unplug it.
2. Turn it over with the blades facing down and place it on a flat surface.
3. Use a screwdriver to remove the screws holding the blades and take out the old blade set.
4. Place the new blade set on the head, aligning the pivot screw with the moving blade guide.
5. Replace the screws without tightening them fully, turn the trimmer over, and align the blades. Then tighten.
6. Clean and lubricate the trimmer regularly with lubricating oil.

Compatible trimmer types

This is a replacement blade for the SkeletonFX GunSteel FX7870GSE and is compatible with all FX7870 models, the SnapFX FX797E, and the LO-PROFX FX726, as well as other trimmers with a two-hole blade system. It is not for trimmers with a 45 mm blade.

Specifications

What else you need

• BaByliss PRO SkeletonFX GunSteel FX7870GSE trimmer
• BaByliss PRO SkeletonFX Gold FX7870GE trimmer
• BaByliss PRO 4-in-1 blade maintenance spray
• Wahl blade lubricating oil, 100 ml
• Wahl Blade Ice spray for cooling and cleaning blades

ProBeauty tip. Japanese steel is corrosion-resistant, but hair and product residue can still retain moisture. Brush the blade after each client and apply a drop of oil at the end of the day.

The BaByliss PRO FXONE Skeleton is an outline trimmer with an all-metal body, available in gold or black, and a 360° exposed T-shaped titanium blade with a standard tooth. The battery is interchangeable and compatible with other FXONE devices. It is designed for clean edges, sharp lines, and detailing.

What it does for you

• See exactly where you cut: the T-blade is fully exposed and zero-gap adjustable.
• Durable blade that stays cooler: Gold Titanium in the gold version, Blue Titanium in the black version.
• Clean edges even in thick hair, with a high-torque, brushless digital motor running at 7200 RPM.
• Up to 3 hours of runtime after 2 hours of charging; the battery is released with a button.
• Quick cleaning, as the hair compartment cover is removable.
• Secure grip, with a textured metal handle and finger support.

How to use it at home

1. Charge the battery on the included charging base and monitor the 4-stage LED ring.
2. Lubricate the blade with a few drops of oil before use.
3. For cutting very close to the skin, adjust the zero-gap setting with the included tool and screwdriver.
4. Outline the shape on dry, combed hair using short strokes, and check the symmetry in the mirror.
5. Finally, remove the hair compartment cover, clean it with the brush, lubricate the blade, and attach the guard.

What it is designed for

It is for outlining the neck and temples, the hairline, the beard line, and detailing. The standard tooth works on most skin types. It does not include guide combs, so it does not replace a hair clipper.

Specifications

What else you need

• BaByliss PRO 4-in-1 blade spray
• Wahl blade oil
• FXONE FXBB33E spare battery
• FXONE All-Metal hair clipper, same battery
• FXONE Double Foil shaver, same battery
• Carbon finishing comb

ProBeauty tip. If you also use the FXONE hair clipper, mark the batteries with a dot of color. You will always know which one is charged and which one is on the charging base.

The BaByliss PRO Boost+ Chameleon FX8700IBPBASE Charging Stand is the charging stand for the Boost+ Chameleon hair clipper. It is compatible with all FX8700 series hair clippers that have a hanging hook. The clipper stands vertically on the stand and charges via its adapter, which is not included.

What it does for you

• The clipper stands upright and does not tip over, because the stand is solid, balanced, and stable.
• Effortless charging: place the clipper on the stand and charging begins.
• Use the adapter you already have from the hair clipper.
• Use it with the entire FX8700 series with a hook, not just the Chameleon model.
• Your workspace stays tidy, with the clipper always in the same place.

How to use it at home

1. Place the stand on a flat, dry, and stable surface, near an electrical outlet.
2. Connect the hair clipper adapter to the stand, then plug the adapter into the outlet.
3. Place the clipper in the stand in a vertical position, and check that it is secure.
4. Wipe the hair off the clipper before placing it on charge.
5. When moving the stand, first remove the adapter from the outlet.

For what type of device

BaByliss PRO recommends it for the Boost+ professional hair clipper and all FX8700 hair clippers with a hanging hook. It is not made for FX7870 trimmers, which have their own stand. Without the clipper adapter, the stand does not charge.

Specifications

What else you need

• BaByliss PRO Boost+ Chameleon hair clipper, for which the stand is designed
• BaByliss PRO FXPCGE 8-piece guard set for FX8700
• BaByliss PRO FX4in1 spray for blade maintenance
• Wahl oil for hair clipper blades

ProBeauty tip. If you have two FX8700 clippers on standby, place each on its stand and use a single adapter for the one you use more often. This way, you always know which clipper is charged.

The BaByliss PRO High Performance Conical Wand is a clamp-free conical curling iron from the new High Performance range. It is available in two sizes: 19-13 mm for natural curls and waves and 32-19 mm for loose curls and wider waves. The non-stick black oxide barrel lets curls release easily and adds shine.

What it does for you

• Creates natural curls that are wider at the top and tighter towards the tip thanks to the conical shape.
• Heats up in 25 seconds and quickly recovers heat between sections.
• Heats evenly along the entire 160 mm barrel.
• Lets curls release easily thanks to the black oxide coating and redesigned cool tip.
• Remembers your setting: 5 settings between 140 and 200 °C, with automatic lock and memory.
• Switches off automatically after 20 minutes.

How to use it at home

1. Start with clean, completely dry hair. Apply heat protection.
2. Switch on the device and select a setting. For fine or colour-treated hair, start at 140 °C.
3. Put a heat glove on the hand you use to wrap the hair.
4. Hold the barrel tip-down. Wrap the section from root to tip without touching the scalp, and hold the end.
5. Wait a few seconds, then remove the device from the curl.
6. Let the curls cool, then run your fingers through them. Between sections, place the device on the integrated stand.

For which hair type

BaByliss PRO recommends it for any hair length. The 19-13 mm size is better suited for short and medium-length hair or more defined curls. The 32-19 mm size looks best on medium and long hair for loose waves.

Specifications

What else you need

• Wella EIMI Thermal Image Heat Protection Spray
• L’Oréal Tecni.Art Flex Blowdry Leave-In Cream with heat protection
• ETB Hair Clips for holding hair
• Wella EIMI Mistify Me Light Light-Hold Hairspray
• Olivia Garden Fingerbrush Curved Brush

ProBeauty Tip. For beach waves, wrap the section flat, like a ribbon, not twisted. The wave will be wider and more natural than a round curl.

Attention! The product may have opened or damaged packaging and may show minor signs of use or small scratches that do not affect its functionality!

Babyliss Pro Lo-Pro FXONE Hair Clipper - Professional Performance at the Highest Level

Discover the Babyliss Pro Lo-Pro FXONE Hair Clipper, an innovative trimming tool, perfect for professionals and barbering enthusiasts. It belongs to the LO-PROFX range, renowned for its constant evolution in providing the most advanced grooming tools. The LO-PRO FXONE is equipped with a high-performance digital motor and an interchangeable lithium-ion battery, ensuring a superior trimming experience.

Key Features:

• Ultra Low-profile Metal Cap: Its ergonomic design reduces vibrations and noise, providing increased comfort during use.
• Improved N1 Digital Motor: 6,800 RPM motor, capable of performing 516,800 cutting actions per minute, offering increased efficiency and extended lifespan due to double ball bearings.
• 45mm Blue Titanium MIM Fade Blade: Zero-gap adjustable blade, with an integrated reservoir for constant lubrication and maintaining a low blade temperature.
• Interchangeable Lithium-Ion Battery: Up to 2.5 hours of operating time and 2 hours of fast charging. 4-step LED indicator for battery level.
• 5-Position Locking Taper Handle: Allows precise adjustment of cutting length (0.5 - 1.4 - 2.3 - 3.2 - 4.2 mm), offering maximum flexibility.

Included in the Package:

• 8 Guide Combs: Sizes (n° 0.5 – 1 – 1.5 – 2 – 3 – 4 – 5 – 6) for various haircut styles.
• Dual Voltage Charging Base: Ideal for global use.
• Blade Protection: To keep the blade in optimal condition.
• Spare Parts and Maintenance Tools: Spare blade cushion, screwdriver, cleaning tools, and lubricating oil.

Benefits:

• Superior Performance: With a powerful motor and high-quality blade, you get precise and fast haircuts.
• Durability: Robust construction and quality components ensure a long product lifespan.
• Ergonomics: Its innovative design offers comfort and ease of use, reducing hand fatigue during prolonged trimming sessions.

The Babyliss Pro Lo-Pro FXONE Hair Clipper is the ideal choice for any professional who wants to offer their clients top-notch haircuts with minimal effort. Invest in quality and performance with this advanced barbering tool.

⚠️ Attention! This product is resealed and has scratches on the casing. Functionality is not affected.

Discover the BaByliss PRO SnapFX Cordless Clipper - Professional Performance at Your Fingertips

The BaByliss PRO SnapFX clipper is the high-performance tool ideal for achieving professional haircuts, whether you're at home or in a salon. Combining advanced technology with an ergonomic design, this clipper allows you to create precise and even hairstyles with ease and comfort.

Key Features:

• Powerful Brushless Motor: Equipped with a digital brushless motor, this clipper offers a powerful torque of 6800RPM, ensuring power and speed for precise and efficient cuts.
• Fast Charging and Dual Battery System: The two lithium-ion batteries fully charge in just 3 hours when placed together on the charging stand. Additionally, a single battery charges in just 2 hours, ensuring you'll never run out of power. Each battery provides 2 hours of runtime, guaranteeing continuous and uninterrupted operation.
• Robust and Ergonomic Design: The sturdy metallic construction is built to last, and the ergonomic and balanced design offers a perfect grip and excellent control.
• High-Precision DLC Fade Blade: The sharp black DLC blade is ideal for fades and precise cuts. Adjustable to zero gap and equipped with a smart opening system, it allows for quick and easy maintenance.

Benefits of the BaByliss PRO SnapFX Clipper:

• Power and Speed: The digital brushless motor offers superior performance, ensuring fast and precise cuts for any hair type.
• Unlimited Autonomy: Thanks to the dual interchangeable battery system, you will benefit from continuous autonomy, without interruptions. One battery charges while the other is in use, giving you a worry-free clipping experience.
• Ergonomic and Resistant Design: The robust and ergonomic construction offers comfort and long-term durability, making it ideal for intensive daily use.
• Maximum Versatility: With a complete set of guide combs and an adjustable blade, this clipper is perfect for any haircut style, from classic cuts to complex fades.

Technical Specifications:

• Runtime: Each battery provides 2 hours of use.
• Charging Time: 2 hours for a single battery, 3 hours for both batteries on the charging stand.
• Fade Blade: Adjustable to zero gap, with smart opening system for easy maintenance.
• Battery System: Two interchangeable lithium-ion batteries.
• Light Indicator: Light ring for battery charge level (solid blue for full battery, flashing blue for low battery, flashing red for critically low battery).
• Adjustment Lever: 5 detent cutting positions: 0.8, 1.4, 2, 2.8, 3.5mm.
• Metallic Construction: Robust, ergonomic, and balanced design, with a textured cylindrical handle for a perfect grip.
• Guide Comb Set: 8 premium guide combs (0.5, 1, 1.5, 2, 3, 4, 5, 6mm) with fiberglass for durability and metal clips for secure attachment.

Purchase the BaByliss PRO SnapFX

Unleash your creativity and showcase your talent with BaByliss PRO SnapFX. Exceptional cutting performance and unlimited autonomy take the art of clipping to the next level. Don't miss the opportunity to offer your clients the best results and elevate your services to a superior professional level.

BabylissPro FX3 Black Clipper

Discover the new standard in clippers with the BabylissPro FX3 Black. This clipper stands out for its ergonomic and comfortable design, offering a superior cutting experience.

Features:

• 5-level cutting height lock: The integrated button allows for quick and precise setting of cutting lengths at 0.7mm, 1.1mm, 1.4mm, 1.7mm, and 2.0mm.
• Two speed settings: From 6,000 rpm for precise and controlled cutting, up to 7,000 rpm for fast cutting on any hair type.
• Serrated titanium blade: With a sharper cutting angle for maximum precision and easier gliding through hair.
• LED battery indicators: Displays exact battery levels (75%, 50%, 25%, 0%), ensuring uninterrupted use.
• Wet and dry hair operation: Maximum versatility for cutting in various conditions.
• Long operating time: Up to 5 hours of continuous operation, with a 5-hour charging time.
• Reduced vibrations: For increased comfort during use.
• 2-ring hanging system: For easy and accessible storage at the workstation.

Package includes:

• BabylissPro FX3 Black Clipper
• 4 guide combs (3 mm, 6 mm, 10 mm, 13 mm)
• Cleaning oil
• Cleaning brush
• User manual

The BaByliss PRO SkeletonFX Graphite FX707B2ZE T-Blade is a 40 mm replacement T-blade with a 2.0 mm deep tooth, designed for BaByliss PRO outline trimmers. It is zero-gap adjustable and made for clean outlines, sharp lines, and fine details. The brand recommends it for thick or coarse hair.

What it does for you

• Clean outlines and precise lines with a 40 mm zero-gap adjustable T-blade.
• Easily cuts through thick hair: the 2.0 mm deep tooth is designed for thick and coarse hair.
• Heats up less: the brand says that graphite has very low friction and keeps the blade cooler.
• Lasts a long time because the Graphite coating is very durable.
• Fits multiple devices on any blade system with 2 screws.

How to use it at home

1. Turn off the outline trimmer.
2. Unscrew the screws with a screwdriver and remove the old blade.
3. Place the new blade and check that it is in the correct position, then tighten the screws.
4. Adjust the zero-gap only if you know how, with the moving blade slightly below the fixed one.
5. Clean and maintain the blade with the FX4in1 spray before and during use.

For what type of device

The brand lists it as compatible with the LO-PROFX FX726E trimmer, all FX7870 metal outline trimmers, and any device with a blade held by 2 screws. If you have sensitive skin, choose a blade with a standard tooth.

Specifications

What else you need

• SkeletonFX Gunsteel FX7870GSE Outline Trimmer
• SkeletonFX GoldFX FX7870GE Outline Trimmer
• BaByliss PRO FX4in1 Spray, Recommended by the Brand
• Wahl Blade Oil

ProBeauty Tip. Keep the old blade until you check that the new one cuts well. If it pulls the hair or pricks the skin, the zero-gap adjustment is incorrect and needs to be redone.

BaByliss PRO 35000591 is a replacement blade set sold for the FlashFX FX59ZE and EtchFX FX69ZE contour trimmers. According to the brand's specifications, these trimmers feature a zero-adjustable stainless steel T-blade, ideal for contours, sideburns, and the neck. The set snaps directly onto the head without screws.

What it does for you

• Restores clean contours when the old blade no longer cuts cleanly on the first pass.
• Changes in seconds: the blade set snaps off and attaches with your thumb, no screwdriver required.
• Keeps your trimmer working: you only replace the worn blades, not the entire trimmer.
• Can be adjusted to zero using the adjustment tool provided with the trimmer, if you want very close trims.

How to use it at home

1. Set the switch to "0-OFF" and unplug the trimmer.
2. Place your thumb under the small blade and push forward to detach the blade set from the housing.
3. Place the new set on the trimmer head.
4. Press the large blade with your thumb until it clicks into place.
5. Apply a few drops of oil to the blades, without overdoing it, and turn on the trimmer.

For which type of trimmer

It is sold for the BaByliss PRO FlashFX FX59ZE cordless and EtchFX FX69ZE corded contour trimmers. It is not for the SkeletonFX FX7870 or LO-PROFX series, which attach with screws. If you have a different trimmer, write us the code before ordering.

What else you need

• BaByliss PRO 4-in-1 Blade Care Spray
• Wahl Blade Oil for lubricating the blades, 100 ml
• Wahl Blade Ice Spray for cooling and cleaning the blades

ProBeauty Tip. If you want to adjust the blades to zero, use only the adjustment tool provided with the FX59ZE or FX69ZE. Adjusting by eye can cause the moving blade to protrude beyond the fixed blade.

BaByliss PRO FX821E FX500ME is a replacement blade sold for the BaByliss PRO FX821E mini clipper. The FX821E is a mini hair clipper and trimmer with two detachable blades, one fine and one coarser. You use it for sideburns, neck, beard, and mustache.

What it does for you

• It brings back clean finishes on your sideburns, neck, beard, and mustache.
• It keeps your clipper working: you only replace the worn blade, not the entire clipper.
• It can be replaced without service, because the blades of the FX821E clipper are detachable.
• It cuts again without pulling, when the old blade has become dull.

How to use it at home

1. Turn off the clipper and unplug it.
2. Remove the old blade, as shown in the clipper manual.
3. Place the new blade in the same position and press until it is firmly attached.
4. Put a drop of oil on the teeth and turn on the clipper for a few seconds.
5. Test the cut on a small area before finishing.

For what type of clipper

It is sold for the BaByliss PRO FX821E mini hair clipper and trimmer, an older model. The brand does not publish a sheet for the FX500ME code or any other compatible models. If you have another clipper, write us its code before ordering, so you do not receive a blade that does not fit.

What else you need

• BaByliss PRO 4-in-1 spray for blade maintenance
• Wahl oil for lubricating the blades, 100 ml
• Wahl Blade Ice spray for cooling and cleaning the blades

ProBeauty's tip. When ordering, take the old blade with you or a photo of it next to the clipper. This way you can immediately see if you need the fine blade or the coarser one of the FX821E clipper.

BaByliss PRO 3 mm Guard for FX660SE is the 3 mm replacement guard for the FX660SE hair clipper. It is the shortest of the 5 guards the brand offers for this clipper: 3, 6, 9, 12, and 16 mm. Get it if you have lost or broken the original one.

What it does for you

• Cut evenly at 3 mm again without buying another complete set.
• Complete the original set of the FX660SE clipper with the missing guard.
• Create clean short transitions on the sides and at the nape of the neck.
• Easily switch to the blade adjustment for lengths under 3 mm, which the FX660SE has from the factory.

How to use it at home

1. Turn off the clipper and clear the hair from the blade.
2. Place the guard over the blade and press until it locks into place.
3. Check that it is securely attached before turning on the clipper.
4. Cut with even strokes, without pressing the guard into the scalp.
5. After cutting, remove it, brush off the hair, and store it with the other guards.

For which type of device

It is the 3 mm guard for the BaByliss PRO FX660SE hair clipper. It is not a set: you receive a single guard. For the FX8700, FX825, or FX895E clippers, choose the FXPCGE set, made for them.

Specifications

What else you need

• BaByliss PRO FX4in1 Spray for blade maintenance
• Wahl Oil for hair clipper blades
• Straight cutting comb
• Wahl cutting cape

ProBeauty Tip. For a smooth transition under 3 mm, remove the guard and use the FX660SE blade adjustment, which ranges from 3.2 to 0.8 mm. This way, you blend the 3 mm guard with the short-cut area.

BaByliss PRO 35087000 is the 45 mm replacement blade for the ChromFX FX8700E hair clipper. The brand lists it as the replacement blade on the clipper's page. It is a Japanese steel blade with a very sharp V-shaped cutting angle, designed for fading.

What it does for you

• Restores the cut to like-new condition, as it is the brand's recommended replacement blade for the FX8700E.
• Cuts cleanly and precisely, thanks to the Japanese steel with a V-shaped cutting angle.
• Gets very close to the skin: it is a flat blade, ideal for blending harsh lines.
• Covers a wide area, with a width of 45 mm.

How to use it at home

1. Turn off the clipper and set the fine adjustment lever on the left to the top position.
2. Loosen the screws with a screwdriver and set them aside.
3. Lift the old moving blade slightly and replace it with the new one on the oscillator.
4. Place the new fixed blade, with the moving blade centered and parallel to it, to avoid injury.
5. Tighten the screws back into place.
6. Clean and lubricate the blade regularly with BaByliss PRO 4 in 1 spray or oil.

For which type of device

It is the replacement blade for the BaByliss PRO ChromFX FX8700E hair clipper, as stated on the clipper's page. The brand does not list this code for other FX8700 variants. If you have the FX8700 Gold, Boost+, or LO-PROFX FX825, choose a blade with compatibility published for the entire series.

Specifications

What else you need

• BaByliss PRO ChromFX FX8700E hair clipper
• BaByliss PRO 4 in 1 spray for blade maintenance
• Wahl oil for lubricating blades, 100 ml
• Wahl Blade Ice spray for cooling and cleaning blades

ProBeauty tip. Check the label under the clipper to make sure it says FX8700E, not just FX8700. For the other variants, blades compatible with the entire series are the safe choice.