ETB Wax

ETB Wax 90 m Hair Removal Wax Strips Roll is a lint-free paper roll for single-use wax hair removal. It is 7 cm wide, and you cut pieces to the length you need. The paper does not leave lint on the skin.

What it does for you

• Does not leave lint on the skin, because the paper is lint-free.
• Cut the strip to fit the area: long for legs, short for underarms or the upper lip.
• You get strips for many sessions from a single 90 m roll.
• Adheres well to single-use wax, as recommended on the label.
• White and simple, so you can easily see how much hair the strip has removed.

How to use it at home

1. Heat the wax according to the instructions on its packaging.
2. Cut a piece from the roll slightly longer than the area where you applied the wax.
3. Place the strip over the wax and press it down firmly, smoothing it in the direction of hair growth.
4. Remove the strip with a firm motion, in the opposite direction of hair growth.

For what type of work

For single-use wax hair removal, such as roll-on wax in a cartridge. The roll is practical if you remove hair from different areas and want strips of different lengths. If you prefer pre-cut strips, ETB Wax also has 7 x 20 cm hair removal strips. You do not need it for hard wax beads, which lift off the skin on their own.

Specifications

What else you need

• Pink roll-on wax 100 ml
• Green roll-on wax 100 ml
• Mono wax heater 100 ml
• Post-hair removal cleansing oil with aloe vera
• Talc powder for hair removal

ProBeauty tip. Cut a few strips of different lengths at the beginning and keep them close by. With wax applied to the skin, you won't have time to look for scissors.

ETB Wax Yellow Roll-On Wax 100 ml is a single-use hair removal wax in a cartridge with a wide applicator. It has a short list of four ingredients and contains no colorant. It is heated in a wax heater and removed with hair removal strips.

What it does for you

• Hot wax hair removal with no preparation: place the cartridge in the heater and wait.
• An even layer with no waste, thanks to the wide applicator that rolls the wax onto the skin.
• Ready in about 20 minutes after plugging in the heater.
• Suitable for different skin types, including difficult areas.
• Simple formula: resin, mineral oil, beeswax, and microcrystalline wax, with no colorant.

How to use it at home

1. Place the cartridge in the heater and plug it in.
2. After about 20 minutes, the wax will reach the ideal temperature for hair removal.
3. Roll the wax on in the direction of hair growth.
4. Apply a hair removal strip over the wax and smooth it down.
5. Pull the strip off quickly in the opposite direction of hair growth.
6. Finish with an oil after hair removal to remove any wax residue.

For which skin type and area

It can be used on different skin types and is suitable even for difficult areas. If you prefer a product with no colorant, yellow is the choice in the ETB Wax roll-on range. It is not a hard wax: without strips, you cannot remove it from the skin. You will also need a heater for 100 ml cartridges.

What else you need

• 100 ml Mono Wax Heater
• ProWarm Trio 3 x 100 ml Heater Set
• 90 m Hair Removal Strips
• Argan Post-Hair Removal Cleansing Oil
• Lavender Pre-Hair Removal Oil
• Talcum Powder for Hair Removal

ProBeauty Tip. Lightly powder clean, dry skin before applying the wax. The wax grips the hair better, and the skin feels less sticky after you pull off the strip.

ETB Wax Pink Roll-On Wax 100 ml is a single-use hair removal wax in a cartridge with a wide applicator. The label describes it as a hair removal wax with titanium dioxide. You heat it in a wax heater, apply it with the roller, and remove it with hair removal strips.

What it does for you

• Remove hair with hot wax at home, without a pot or spatula: the cartridge heats directly in the heater.
• Cover large areas quickly, as the wide applicator applies an even layer in a single pass.
• It is ready to use in about 20 minutes after connecting the heater.
• It works on different skin types and can also be used on areas that are harder to depilate.
• Work cleanly: the wax is single-use, so you do not reuse the wax removed from the skin.

How to use it at home

1. Place the wax cartridge in the heater and plug the device into an outlet.
2. Wait about 20 minutes until the wax reaches the right temperature.
3. Roll the wax onto the skin in the direction of hair growth.
4. Place a hair removal strip over the layer of wax and press it down firmly.
5. Pull the strip off quickly, in the opposite direction of hair growth.
6. Finally, apply a post-hair removal oil to the treated area.

For what skin type and area

ETB Wax is suitable for different skin types and for cases where hair removal is more difficult. It is a strip wax, not a hard wax: it does not lift off the skin on its own, like beads. You need a 100 ml cartridge wax heater and hair removal strips or a roller.

The pink, yellow, green, and blue ETB Wax roll-on waxes have the same base in the list of ingredients. The coloring differs, and the pink one also contains titanium dioxide.

What else you need

• 100 ml Mono Wax Heater
• ProWarm Duo 2 x 100 ml Heater Set
• 90 m Hair Removal Roller
• Post-Hair Removal Cleansing Oil with Aloe Vera
• Pre-Hair Removal Foam with Lemon
• Talcum Powder for Hair Removal

ProBeauty Tip. Work in small sections and apply the strip immediately after rolling on the wax, while it is still fluid. If you wait, the wax cools on the skin and the strip no longer grips the hairs as well.

ETB Wax Green Roll-On Wax 100 ml is a single-use hair removal wax in a cartridge with a wide applicator. You use it with a cartridge heater and hair removal strips. It is suitable for different skin types.

What it does for you

• Get rid of the mess: you only heat the cartridge, directly in the device.
• Control how much you apply, because the wide roller leaves a thin and even layer.
• Start hair removal after approximately 20 minutes of heating.
• Use the same wax on multiple areas, including those where hair removal is more difficult.
• Easily see where you have applied it, thanks to the green color on the skin.

How to use it at home

1. Place the wax cartridge in the heater and plug the device into the outlet.
2. Leave the wax for approximately 20 minutes until it reaches the right temperature.
3. Apply the wax with the roll-on, in the direction of hair growth.
4. Place the hair removal strip over the layer and press it onto the skin.
5. Pull the strip quickly in the opposite direction of hair growth.
6. Apply an after-hair removal oil to the treated area.

For what skin type and area

ETB Wax recommends it for different skin types and for difficult hair removal cases. It is a strip wax, so you cannot remove it like pearl elastic wax. It has the same ingredient base as the other ETB Wax roll-on colors; the green color comes from the CI 61565 dye. If you have never used roll-on wax before, start with a small area, such as the calf.

What else you need

• 100 ml Mono Wax Heater
• ProWarm Duo 2 x 100 ml Heater Set
• 90 m Hair Removal Roller
• After-Hair Removal Gel with Camphor and Menthol
• Pre-Hair Removal Foam with Lime

ProBeauty Tip. Stretch the skin with your free hand while pulling the strip. Stretched skin hurts less, and the hair comes out cleaner and more thoroughly at the knees and ankles.

ETB Wax Elastic Wax Pink Beads 1 kg is a hot hair removal wax in beads that you melt in a heater and pull off without strips. Its name includes TiO2, which means titanium dioxide. The front of the bag says "Made in Italy".

What it does for you

• Remove hair without strips. The wax hardens on the skin and you pull it off directly, like a strip.
• Spreads easily because it has a soft and elastic texture.
• Peels off easily from the skin, as described by ETB.
• Works on all areas of the body, says the product sheet.
• Melt only what you need. The beads are easy to measure, and the rest stays in the bag for next time.

How to use it at home

1. Put the beads in the heater container and let them melt.
2. Check the wax temperature on a small area of skin before you start.
3. Spread the hot wax with a spatula in the direction of hair growth.
4. Wait for it to harden until it is no longer sticky to the touch.
5. Grab the edge and pull the strip off quickly in the opposite direction of hair growth.
6. Finally, clean up the residue and moisturize the skin with a post-hair removal oil.

For what skin type and area

ETB says it is for all areas of the body. The sheet says nothing about sensitive skin or the face, so work on small areas there and test first. It is not a roll-on wax or one with strips: you need a heater with a container and a spatula. The 1 kg pink, yellow, green, and aloe vera variants have the same description at ETB, only the color differs.

What else you need

• ETB Wax Pro Advance 800 ml Wax Heater
• ETB Wax Wooden Spatulas
• Protective paper for the heater
• ETB Wax Post-Hair Removal Oil with Aloe Vera
• ItalWax Talc Powder for before hair removal

ProBeauty Tip. Leave the bottom edge of the layer slightly thicker than the rest. From there you grab the strip easily, without looking for it with your nail, and the pulling comes out in a single motion.

ETB Wax 100 pre-cut hair removal strips are ready-to-use strips made of high-cellulose content paper. Each measures 7 x 20 cm. Use them for single-use wax hair removal, for example with roll-on wax.

What they do for you

• No more cutting strips: they are ready at the size of 7 x 20 cm.
• They grip the wax well, because the paper is rich in cellulose.
• You get a hundred pieces in one pack, enough for several sessions.
• White and clean, you can immediately see how many hairs each strip removed.
• They are compatible with any single-use wax, not just ETB Wax.

How to use them at home

1. Heat the wax and spread it on the skin in the direction of hair growth.
2. Place the strip over the layer of wax and press it down firmly, in the direction of the hair.
3. Hold the skin taut with the other hand.
4. Pull the strip quickly, in the opposite direction of hair growth.

For what type of work

For single-use wax hair removal on the legs, arms, or underarms. For small areas, such as the upper lip, cut the strip in half. These are not pre-applied cold wax strips: you need heated wax separately. If you want strips of different lengths, choose the ETB Wax 90 m hair removal roll.

Specifications

What else you need

• 90 m hair removal roll
• 100 ml pink roll-on wax
• 100 ml mono wax heater
• Post-hair removal cleansing oil with aloe vera
• Pre-hair removal foam with lime

ProBeauty tip. Leave one end of the strip free, without wax under it. You can grip it more easily between your fingers and pull it in one motion, without the strip hesitating on the skin.

ETB Wax Yellow Elastic Wax Beads 1 kg is a hot wax for hair removal, in beads, that melts in the heater and is pulled off without strips. It has a soft and elastic texture and spreads easily. On the front of the bag it says "Made in Italy".

What it does for you

• Epilate without strips. The hardened wax becomes the strip itself that you pull.
• Spreads easily in a uniform layer, thanks to the soft and elastic texture.
• Comes off easily from the skin when you pull it.
• Works on all areas of the body, according to the ETB sheet.
• Retains its qualities even when you use it for a long time, says ETB, so the 1 kg bag does not spoil from one session to another.

How to use it at home

1. Melt in the heater as many beads as you need for the area to be epilated.
2. Test the wax on a small area of skin to see if the temperature is tolerable.
3. Spread it hot with a spatula, in the direction of hair growth.
4. Leave it to harden, until it no longer sticks to your finger.
5. Pull the strip off in one motion, against the direction of hair growth.
6. Clean up the residue and moisturize the skin with a post-epilation oil.

For what type of skin and area

ETB recommends it for all areas of the body. The sheet does not give indications for sensitive skin or for the face, so on delicate areas you work on small portions. It is not a roll-on wax: it needs a heater with a container and a spatula. The 1 kg yellow, pink, green, and aloe vera variants have the same description, you choose by color.

What else you need

• ETB Wax Pro Advance 800 ml Wax Heater
• ETB Wax Wooden Spatulas
• Protective paper for the heater
• ETB Wax Post-Epilation Oil with Argan
• ItalWax Pre-Epilation Foam with Lime

ProBeauty Tip. On the legs, work on palm-sized strips, not the whole leg at once. Small strips harden uniformly and you pull them off more easily, in a single motion.

The ETB Wax Disposable Wooden Spatula is a tool for spreading hot wax onto the skin. You can use it on almost the entire body, including the underarms, groin area, and face. The edges are well-sanded, and the wood is treated to prevent splintering.

What it does for you

• Spreads wax evenly in a controlled layer over the area you are epilating.
• Does not scratch. The edges are sanded, and the wood is treated during manufacturing to prevent splintering.
• Simple hygiene: use it once and throw it away.
• Works on almost the entire body, from the underarms and groin area to the face.
• Can also be used for cosmetics. ETB says you can use it to prepare and apply creams and lotions.

How to use it at home

1. Use a new spatula for each person or session.
2. Dip it into the melted wax and drain the excess over the edge of the container.
3. Spread the wax on the skin in the direction of hair growth, holding the spatula at an angle.
4. Once it has touched the skin, do not dip it back into the wax: use a new spatula for the next application.
5. When finished, throw it away.

What it is for

For hot wax from a wax heater, such as ETB Wax beads and coins, and for preparing creams or lotions. It is not for roll-on wax, which has its own applicator. It is not a spatula to keep, as the wood cannot be sterilized.

What else you need

• ETB Wax Pink Elastic Wax Beads 1 kg
• ETB Wax Pro Advance Wax Heater 800 ml
• Protective paper for wax heater
• ETB Wax Orange Touch Vegan Synthetic Wax 800 g
• ETB Wax Post-Epilation Oil with Argan

ProBeauty Tip. For eyebrows or above the lip, use the tip of the spatula, not its flat side. The wax comes out in a narrow strip, and you can better control the outline.

ETB Wax Aloe Vera Elastic Wax Beads 1 kg is a hot wax for hair removal in beads, which you melt in a wax heater and pull off without strips. Aloe Vera is the name of the variant, and the ETB description is the same as for the other 1 kg beads. The front of the bag says "Made in Italy".

What it does for you

• Remove hair without strips. The wax hardens on the skin and you pull it off directly.
• Spreads easily, because the texture is soft and elastic.
• Is easily removed when you pull the strip, says ETB.
• Works on all areas of the body, according to the product sheet.
• Retains its characteristics even with prolonged use, so the 1 kg bag lasts for several sessions.

How to use it at home

1. Melt the beads in the wax heater.
2. Check the temperature on a small area of skin.
3. Spread the hot wax with a spatula, in the direction of hair growth.
4. Leave it to harden until it no longer sticks.
5. Pull the strip off quickly, in the opposite direction of hair growth.
6. Clean up the residue and moisturize the skin with a post-hair removal oil.

For what type of skin and area

ETB recommends it for all areas of the body. The sheet does not give separate indications for sensitive skin or for the face, so there you start with a small portion. It is not a roll-on wax and is not used with strips. The 1 kg aloe vera, pink, yellow, and green variants have the same description at ETB, choose by color.

What else you need

• ETB Wax Pro Advance 800 ml Wax Heater
• ETB Wax Wooden Spatulas
• Protective paper for wax heater
• ETB Wax Post-Hair Removal Oil with Aloe Vera
• ItalWax Nirvana Pre-Hair Removal Oil with Lavender

ProBeauty's tip. Remove hair from clean and completely dry skin, without cream. On oily or damp skin, the wax grips the hair more difficultly.

ETB Wax Elastic Wax Beads Green 1 kg is a hot wax for hair removal, in beads, that melts in the heater. Once it hardens, you pull it off directly, without strips. On the front of the bag it says "Made in Italy".

What it does for you

• You don't need strips, because the hardened wax pulls off by itself, like a strip.
• It spreads easily and evenly, it has a soft and elastic texture.
• It comes off easily from the skin, according to the ETB description.
• You use it on all areas of the body, says the product sheet.
• It stays just as good over time. ETB says that it keeps its characteristics even with prolonged use.

How to use it at home

1. Put the beads in the heater and let them melt.
2. Test the heat of the wax on a small area of skin.
3. Spread the hot wax with a spatula, in the direction of hair growth.
4. Wait until it hardens and is no longer sticky.
5. Pull the strip off quickly, in the opposite direction of hair growth.
6. Remove the residue with a post-hair removal oil.

For what type of skin and area

ETB gives it for all areas of the body. The sheet does not talk about sensitive skin or the face, so there you start with a small portion. It is not a wax with strips nor a roll-on. The green version has the same description as the pink, yellow and aloe vera versions of 1 kg.

What else you need

• ETB Wax Pro Advance 800 ml Wax Heater
• ETB Wax Wooden Spatulas
• Protective paper for wax heater
• ETB Wax Post-Hair Removal Oil with aloe vera
• ETB Wax Post-Hair Removal Gel with camphor and menthol

ProBeauty's tip. Stretch the skin with the free hand right at the moment of pulling. Stretched skin hurts less, and the hairs come out cleaner.

ETB Wax Hair Removal Strips 50 pcs are pre-cut strips, measuring 7 x 20 cm, for single-use wax hair removal. The small pack is ideal if you are just starting with roll-on wax or only removing hair from a few areas. Use them with separately heated wax.

What they offer you

• Start hair removal immediately, without having to cut strips from a roll.
• They are easy to handle: 7 x 20 cm, large enough to cover a section of your leg.
• A small pack to try: 50 pieces, enough for your first few sessions at home.
• They work with roll-on wax and other single-use waxes that are removed with strips.
• They take up little space in your drawer or hair removal kit.

How to use them at home

1. Heat the wax and apply a thin layer in the direction of hair growth.
2. Place the strip over the wax layer and press it down with the palm of your hand.
3. Stretch the skin with your other hand.
4. Pull the strip off quickly, in the opposite direction of hair growth.

What they are for

For single-use wax hair removal at home on the legs, arms, or underarms. For smaller areas, you can cut the strip into shorter pieces. They do not contain wax, so you need separately heated wax. If you remove hair frequently, the 100-piece pack or 90 m roll will last longer.

Specifications

What else you need

• 90 m hair removal roll
• 100 ml yellow roll-on wax
• 100 ml mono wax heater
• After-hair removal gel with camphor and menthol
• Talc powder for hair removal

ProBeauty tip. Keep the pack closed and away from moisture. Damp or bent strips do not adhere evenly to the wax and leave hair behind.

ETB Wax Protective Paper for 800 ml Wax Heater is a paper collar that attaches to the rim of the wax container or tin. It stops drips from running down the device or onto the table. It fits 800 ml heaters.

What it does for you

• The heater stays clean. Wax drips stop on the paper, not on the casing.
• The work surface doesn't get dirty when you remove the wax with a spatula.
• Fits most containers used for heating wax, says ETB.
• Easy to put on and take off, without tools.
• Works with 800 ml heaters, such as the ETB Wax Pro Advance.

How to use it at home

1. With the heater turned off and cool, place the paper around the rim of the wax container or tin.
2. Press it gently onto the rim to keep it in place.
3. Turn on the heater and melt the wax as usual.
4. Drip excess wax from the spatula onto the protected rim.
5. When the paper has collected wax, let it cool and replace it.

For what type of heater

For 800 ml heaters and most containers used for melting wax, such as wax tins. It is not for 100 ml roll-on heaters, where the wax is enclosed in a reservoir. It does not replace cleaning the device; it simply makes it less frequent.

What else you need

• ETB Wax Pro Advance 800 ml Wax Heater
• ETB Wax Wooden Spatulas
• ETB Wax Yellow Elastic Wax Beads 1 kg
• ItalWax Aloe Vera Wax in a Metal Tin 800 ml
• ETB Wax Pink Elastic Wax Coins with Titanium Dioxide 1 kg

ProBeauty Tip. Always drip the spatula on the same side of the collar. This way, only one section of the paper gets covered, and the rest of the rim stays clean for longer.

The ETB Wax 100 ml Mono Wax Heater is a small device for a single 100 ml wax cartridge. It has its own applicator, so you heat the wax and apply it with the same device. It is suitable for hair removal at home, but also for salon use.

What it does for you

• The wax is ready in approximately 20 minutes, liquid and ready to apply.
• You heat and apply it with the same device, because it comes with its own applicator.
• It stands stably on the table, in the support that holds it in a vertical position.
• It takes up very little space: it has a small base and can be stored anywhere.
• You can take it with you on trips, because of its small size.

How to use it at home

1. Insert a 100 ml wax cartridge into the device.
2. Connect the cable to the outlet and place the device in the support, vertically.
3. Let the wax heat for approximately 20 minutes, until it becomes liquid.
4. Roll the wax on the skin in the direction of hair growth and remove it with hair removal strips.
5. At the end, unplug the device and let it cool down in the support.

For what type of work

It is the simple choice if you remove hair at home with a single roll-on wax. It works with 100 ml cartridges, such as ETB Wax pink, yellow, green, and blue waxes. If you want to change the wax often between areas, a Duo or Trio set will save you from changing cartridges. It is not for pearl wax, which melts in a container.

Specifications

What else you need

• 100 ml pink roll-on wax
• 100 ml yellow roll-on wax
• 100 ml green roll-on wax
• 90 m hair removal roll
• Post-hair removal cleansing oil with aloe vera

ProBeauty tip. Before the first pass, roll the applicator on a hair removal strip. See if the wax flows evenly before you put it on the skin and don't burn the first portion on the area to be removed.

🌿 Your post-depilation care ritual begins with ETB WAX Post Depilatory Cleansing Oil with Aloe Vera, a professional premium oil that gently cleanses, soothes, and intensely moisturizes sensitized skin. With a 100% vegan formula, this care oil is enriched with precious Aloe Vera and botanical oils that offer protection, regeneration, and softness from the first application.

💧 Its velvety texture effectively removes wax residues without leaving greasy marks. It is perfect even for sensitive skin, prone to redness or irritation, thanks to the soothing and anti-inflammatory properties of Aloe Vera.

✅ Key Benefits:

• Effectively and gently cleanses the depilated area
• Soothes irritated skin and reduces redness
• Hydrates and maintains the skin's natural barrier
• Light texture, with rapid absorption
• Ideal for salons and professional use
• Suitable for all skin types
• 100% vegan formula, free of animal-derived ingredients

🛠️ How to use:

1. Apply a small amount to a cotton pad

2. Gently wipe the depilated area with circular motions

3. Use immediately after depilation and for up to 48 hours for enhanced comfort

⚠️ Caution: For external use only. Do not apply to irritated, broken, or wounded skin. Avoid contact with eyes and mucous membranes. Avoid sun exposure and the use of alcohol or perfumed products for 24 hours after application.

💚 PRO Tip: Complete your post-depilation care routine with ETB WAX Cooling and Soothing Anti-inflammatory Gel – for perfectly balanced and protected skin!

💙 Efficient, gentle, and fast hair removal for all skin types

Say goodbye to unwanted hair with ETB Wax Blue Wax with Azulene, the ideal choice for professional hair removal, right at home or in the salon! The azulene formula is specially designed to soothe sensitive skin, providing smooth results without irritation.

✔ Wide applicator for fast and even coverage
✔ Perfect texture for difficult areas
✔ Suitable for all skin types, including sensitive

✨ Key benefits:

• Effortless, long-lasting hair removal
• Azulene soothes and reduces redness
• Hygienic and precise application thanks to the wide roll-on
• Ideal for facial, body, armpit, or bikini line hair removal

🔧 How to use:

1. Insert the wax cartridge into the heater.

2. Allow approximately 20 minutes to reach the ideal temperature.

3. Apply the wax in the direction of hair growth.

4. Apply the waxing strip, press gently, then pull firmly and quickly in the opposite direction.

5. Finish with a post-epilation oil to soothe the skin.

📌 Choose ETB Wax for smooth, soft skin and uncompromising hair removal!

🌿 Your post-depilation care ritual begins with ETB WAX Post Depilatory Cleansing Oil, a professional premium oil that gently cleanses, soothes, and intensely moisturizes sensitive skin. With a 100% vegan formula, this care oil is enriched with Argan Oil and precious botanical oils that provide protection, regeneration, and softness from the very first application.

💧 Its velvety texture effectively removes wax residues without leaving greasy traces. It is perfect even for sensitive skin, prone to redness or irritation, thanks to its soothing and anti-inflammatory properties.

✅ Key benefits:

• Effectively and gently cleanses the depilated area
• Soothes irritated skin and reduces redness
• Hydrates and maintains the skin's natural barrier
• Light texture, with rapid absorption
• Ideal for salons and professional use
• Suitable for all skin types
• 100% vegan formula, without animal-derived ingredients

🛠️ How to use:

1. Apply a small amount to a cotton pad

2. Gently wipe the depilated area with circular motions

3. Use immediately after depilation and for up to 48 hours for enhanced comfort

⚠️ Caution: For external use only. Do not apply to irritated, broken, or damaged skin. Avoid contact with eyes and mucous membranes. Avoid sun exposure and the use of alcohol or perfumed products for 24 hours after application.

💚 PRO Tip: Complete your post-depilation care routine with ETB WAX Cooling and Calming Anti-inflammatory Gel – for perfectly balanced and protected skin!

The ETB Wax ProWarm Trio Set 3 x 100 ml wax heater consists of a heating base and three wax applicators. Keep three different waxes warm at the same time and switch between them without interruption. It comes with the power cable included, ready to use.

What it does for you

• Work with three waxes at once, for example, one for legs and one for delicate areas.
• The wax stays evenly warm, because the base distributes the heat evenly.
• Don't stop halfway through hair removal: when one applicator is empty, you have another warm one ready.
• The workspace stays tidy, with all the applicators on the same stable base.
• Use it from day one: the set comes complete, with a power cable.

How to use it at home

1. Place the base on a flat, stable surface and connect the cable to a power outlet.
2. Fill the applicators with the wax you want to use and place them on the base.
3. Let the wax heat up. You can find the heating time in the wax instructions.
4. Take an applicator, spread the wax in the direction of hair growth, and remove it with hair removal strips.
5. Between areas, place the applicator back on the base so the wax stays warm.

For what type of work

ProWarm Trio is designed for a busy salon, but it also works at home if you remove hair often or use different waxes on different areas. If you work with a single wax, the Duo set or the mono heater will be enough for you. For pearl elastic wax, you need a heater with a container, such as the ETB Wax Pro Advance.

Specifications

What else you need

• Pink roll-on wax 100 ml
• Yellow roll-on wax 100 ml
• Blue roll-on wax 100 ml
• Hair removal roll 90 m
• Post-hair removal cleansing oil with aloe vera

ProBeauty tip. Stick a piece of tape with the wax name on each applicator. When working with three colors, you will no longer have to guess which wax is for the face and which is for the legs.

❄️ Cool, soothe, and protect your skin after depilation with ETB WAX Post Depilatory Cooling Gel, a 100% vegan professional gel with camphor and menthol, created to provide an instant sensation of comfort and freshness. Ideal for all skin types, even sensitive ones, this light, fast-absorbing gel reduces redness, burning, and discomfort, supporting the restoration of the skin's natural balance.

🌿 Vegan formula – no animal-derived ingredients.
🌬️ Light, non-greasy texture that leaves skin smooth and soft.
💚 Specifically for professional use, perfect for waxing salons or at home.

✅ Key benefits:

• Instantly soothes and cools waxed skin
• Reduces redness, irritation, and itching
• Intensely moisturizes and prevents skin dryness
• Stimulates natural epidermal regeneration
• Suitable for all body areas
• Fine, non-sticky texture that absorbs quickly
• Can be used up to 48 hours after waxing
• 🛠️ How to use:

1. Apply a small amount on a makeup remover pad or directly with your hand

2. Gently massage the waxed area with circular motions

3. Use immediately after waxing and, if necessary, also within the next 48 hours

⚠️ Caution: Do not apply to irritated, broken, or damaged skin. Avoid contact with eyes and mucous membranes. Do not expose skin to sun, alcohol, or perfumes within the first 24 hours after application.

💡 Professional recommendation: Complete your routine with ETB WAX Post-Depilation Cleansing Oils for a complete and effective ritual!

✨ Transform your hair removal routine with ETB Wax, a next-generation elastic wax, ideal for sensitive skin and impeccable results! Made in Italy, this professional formula, 100% vegan and rosin-free, is the perfect solution for precise, clean, and gentle hair removal, without strips and without compromise.

🌿 Key ingredients: based on synthetic hydrocarbons – rosin-free, with an ultra-flexible and elastic texture.

💡 Key benefits:
✔️ Rosin-free – reduced risk of allergies
✔️ Applied without strips – faster and more efficient
✔️ Spreads perfectly in thin layers – economical and precise
✔️ Removes even fine and light-colored hairs
✔️ Controlled cooling (~10 seconds) – minimizes pain
✔️ Medium melting temperature (60–64 °C) – suitable for all skin types

🛠️ How to use:

1. Melt the wax in the heater until it becomes liquid and creamy

2. Let it cool slightly to a tolerable temperature

3. Apply in the direction of hair growth with a spatula

4. Leave it for ~10 seconds to set

5. Pull off quickly against the direction of hair growth

6. Apply ETB post-epilation oil and soothing gel for a perfect finish

⚠️ Warning: Do not apply to irritated or damaged skin. Avoid contact with mucous membranes. Test the temperature before application.

📦 Content: 800g of professional pearls, packaged for salon or home use

The ETB Wax ProWarm Duo Set 2 x 100 ml wax heater has a heating base and two wax applicators. It keeps the wax at a constant temperature throughout the hair removal process. It comes ready to use, with the power cable included.

What it does for you

• Two waxes ready at the same time, for example, one for the body and one for delicate areas.
• The wax stays constantly warm, because the heating is even and stable.
• Work without interruptions, switching from one applicator to the other.
• Clean and modern design, which looks good even on a home table.
• Works both at home and in the salon, as recommended by ETB Wax.

How to use it at home

1. Place the base on a flat and stable surface and connect the cable to the socket.
2. Fill the applicators with the chosen wax and place them on the base.
3. Wait for the wax to heat up, following the instructions on its packaging.
4. Apply the wax in the direction of hair growth and remove it with hair removal strips.
5. Place the applicator back on the base between areas and unplug the device at the end.

For what type of work

For home hair removal if you use two waxes, and for small salons with daily work. If you want to keep three waxes warm, choose ProWarm Trio. If you remove hair infrequently and with a single wax, the mono heater is more practical. The set is not designed for heated pearl wax in a container.

Specifications

What else you need

• Pink roll-on wax 100 ml
• Green roll-on wax 100 ml
• Hair removal roll 90 m
• Post-hair removal gel with camphor and menthol
• Talc powder for hair removal

ProBeauty tip. Turn on the set before preparing your skin. While you shower, dry off, and apply the powder, the wax heats up, so you don't have to wait by the device.

The ETB Wax Pro Advance 800 ml wax heater is a device for melting hot hair removal wax. It has a power output of 100 W and an analog thermostat, and the box includes a lid and power cable. ETB designed it for professional salon use, but it is just as easy to use at home.

What it does for you

• The wax heats up quickly, with a power output of 100 W.
• You control the temperature with the analog thermostat, so the wax is neither too hard nor too hot.
• It lasts a long time, according to ETB: the heating element is shielded and made for constant use.
• The wax stays clean between sessions, because it comes with a lid.
• It holds a lot of wax at once: the capacity is 800 ml.

How to use it at home

1. Place the heater on a stable surface and put the protective paper around the edge, if you use it.
2. Put the wax in the container and cover it with the lid.
3. Connect the cable and set the temperature on the thermostat.
4. Wait until the wax becomes liquid and creamy, then stir it with a spatula.
5. Test the temperature on a small area of skin before each new area.
6. After hair removal, turn off the device and put the lid back on.

What it is for

For hot hair removal wax that melts in a container and is spread with a spatula, such as pearl and coin wax. It is not a heater for roll-on cartridges. For those, ETB Wax has the Mono, ProWarm Duo, and ProWarm Trio heaters.

Specifications

What else you need

• ETB Wax pink pearl elastic wax 1 kg
• ETB Wax purple jasmine vegan synthetic wax 800 g
• Protective paper for 800 ml wax heater
• ETB Wax wooden spatulas
• ETB Wax post-hair removal oil with aloe vera

ProBeauty tip. Turn on the heater before you get ready: while you shower and dry your skin, the wax has time to melt. Stir it before each strip so that it has the same temperature throughout.

✨ Transform your hair removal routine with ETB Wax, a next-generation elastic wax, ideal for sensitive skin and impeccable results! Made in Italy, this professional formula, 100% vegan and rosin-free, is the perfect solution for precise, clean, and gentle hair removal, without strips and without compromise.

🌿 Key ingredients: based on synthetic hydrocarbons – rosin-free, with an ultra-flexible and elastic texture.

💡 Key benefits:
✔️ Rosin-free – reduced risk of allergies
✔️ Applied without strips – faster and more efficient
✔️ Spreads perfectly in thin layers – economical and precise
✔️ Removes even fine and light-colored hairs
✔️ Controlled cooling (~10 seconds) – minimizes pain
✔️ Medium melting temperature (60–64 °C) – suitable for all skin types

🛠️ How to use:

1. Melt the wax in the heater until it becomes liquid and creamy

2. Let it cool slightly to a tolerable temperature

3. Apply in the direction of hair growth with a spatula

4. Leave it for ~10 seconds to set

5. Pull off quickly against the direction of hair growth

6. Apply ETB post-epilation oil and soothing gel for a perfect finish

⚠️ Warning: Do not apply to irritated or damaged skin. Avoid contact with mucous membranes. Test the temperature before application.

📦 Content: 800g of professional pearls, packaged for salon or home use