BaBylissPRO Boost+ SkeletonFX Chameleon 40 mm Detailer
Gama: Boost+
Contour cutter, 40 mm blade
Out of stock
- Produse 100% originale
- Câștigi puncte de loialitate
Descriere
The BaByliss PRO Boost+ SkeletonFX Chameleon is a metal-bodied outline trimmer with an iridescent finish and a 40 mm titanium T-blade with a 2.0 mm deep tooth. The blade is exposed 360°, so you can see the line from any position. It works corded or cordless.
What it does for you
- Very clean edges: the 2.0 mm deep tooth is designed for hard lines and sharp contours.
- Durable blade that stays sharp: titanium is hard and, according to the brand, hypoallergenic.
- See the blade at all times, and the zero-gap can be adjusted without removing it.
- Approximately 180 minutes cordless, with a 3300 mAh battery, charged in 4 hours.
- Secure grip, with a handle covered in diamond-textured rubber.
How to use it at home
- Before first use, charge it for 4 hours. Maximum capacity is achieved after 4 charge and discharge cycles.
- With the switch set to 0, put a drop of oil on the blades and wipe off the excess.
- To charge, connect the plug to the base of the machine; the LED flashes, then stays lit when it is ready.
- Trace the outline on dry hair, with the corner of the blade, in short strokes.
- After use, clean with the brush, oil the blade and set the switch to 0.
For what type of work
It is for contours, the beard line, neck, temples and hard lines, especially on thick or coarse hair. If your skin is easily irritated, test it on a small area first: the deep tooth cuts more aggressively. It does not replace the hair clipper.
Specifications
| Blade | T, titanium, 40 mm, 2.0 mm deep tooth, exposed 360°, zero-gap adjustable |
|---|---|
| Motor | digital, brushless, 7200 RPM |
| Battery | lithium-ion, 3300 mAh |
| Autonomy | approximately 180 minutes |
| Charging | 4 hours |
| Power supply | corded or cordless, universal voltage |
| Body | all-metal, handle with textured rubber, hanging hook |
| In the box | zero-gap tool, cleaning brush, oil |
| Replacement blade | FX707C2ZE |
| Warranty | 24 months (legal guarantee of conformity) |
What else you need
- BaByliss PRO 4-in-1 blade spray
- Wahl blade oil
- Titanium 2.0 FX707C2ZE replacement blade, 40 mm
- FX7870GBPBASE charging stand for SkeletonFX
- Boost+ Chameleon hair clipper
- Carbon finishing comb
ProBeauty tip. If you do not use it often, recharge it for 4 hours approximately every 6 months, as the manual requires. The 3300 mAh battery retains its capacity this way.
Ce să nu faci
- Do not rinse the blade, handle, or adapter with water.
- Do not shorten the first charge: the manual requires 4 continuous hours.
- Do not let the moving blade protrude beyond the fixed blade after the zero-gap adjustment.
Întrebări frecvente
Cât ține bateria?
Aproximativ 180 de minute după 4 ore de încărcare. Poți lucra și legată la priză.
Ce lamă de schimb îi trebuie?
Arhiva BaByliss PRO indică lama SkeletonFX Titanium 2.0 FX707C2ZE: lamă T de 40 mm, dinte adânc de 2,0 mm, compatibilă cu toate modelele FX7870.
Există și mașina de tuns în aceeași culoare?
Da, Boost+ Chameleon FX8700IBPE, mașina de tuns din aceeași serie, cu același efect irizat.
Livrare și retur
Cost de livrare începând de la 19,90 lei. Livrare gratuită peste 250 lei.
14 zile drept de retur dacă nu ești 100% mulțumit(ă) de produs.
Cumpără cu încredere de la PROBEAUTY
Peste 250 lei, transportul e gratuit
Pachete care îți completează comanda
Branduri profesionale, stoc real
Poate mai arunci o privire
- Choosing a selection results in a full page refresh.
- Opens in a new window.
Mai ai 250 lei până la transport gratuit
Mai ai 250 lei până la transport gratuit
