SKU BABFX707ZGSE · Cod EAN 3030050166859

BaBylissPRO SkeletonFX T-Blade Japanese Steel FX707ZGSE 40 mm

Replacement T-Blade Knife

~~€40,95~~ €38,95-4%

Out of stock

Increase must be a multiple of 1 Only 0 left in stock. Please reduce your quantity. Only left in stock. Please reduce your quantity.

Produse 100% originale
Câștigi puncte de loialitate

Vezi politica de livrare

Cost de livrare începând de la 19,90 lei. Livrare gratuită peste 250 lei.

14 zile drept de retur dacă nu ești 100% mulțumit(ă) de produs.

Descriere

BaByliss PRO SkeletonFX FX707ZGSE is a 40 mm T-blade replacement made from Japanese steel for the SkeletonFX GunSteel FX7870GSE trimmer. It features standard 1.6 mm teeth for clean cuts on any hair texture. It is also compatible with other FX7870 models, the SnapFX FX797E, and the LO-PROFX FX726.

What it does for you

Cleanly trims edges, details, and shapes with its 40 mm T-blade.
Cuts powerfully and stays sharp: Japanese steel is a durable metal with excellent cutting power.
Resists rust and corrosion, according to the brand.
Works on any hair texture and suits all skin sensitivities thanks to its standard teeth.
Adjusts to a zero-gap setting for trims very close to the skin.

How to use it at home

Turn off the trimmer and unplug it.
Turn it over with the blades facing down and place it on a flat surface.
Use a screwdriver to remove the screws holding the blades and take out the old blade set.
Place the new blade set on the head, aligning the pivot screw with the moving blade guide.
Replace the screws without tightening them fully, turn the trimmer over, and align the blades. Then tighten.
Clean and lubricate the trimmer regularly with lubricating oil.

Compatible trimmer types

This is a replacement blade for the SkeletonFX GunSteel FX7870GSE and is compatible with all FX7870 models, the SnapFX FX797E, and the LO-PROFX FX726, as well as other trimmers with a two-hole blade system. It is not for trimmers with a 45 mm blade.

Specifications

Type	T-blade, standard teeth
Width	40 mm
Teeth	1.6 mm
Material	Japanese steel, corrosion-resistant
Adjustment	zero-gap
Compatibility	FX7870GSE, all FX7870, FX797E, FX726, two-hole blade systems

What else you need

ProBeauty tip. Japanese steel is corrosion-resistant, but hair and product residue can still retain moisture. Brush the blade after each client and apply a drop of oil at the end of the day.

Ce să nu faci

Do not fully tighten the screws before aligning the blades.
Do not turn on the device without applying lubricating oil to the new blade.
Do not install it on hair clippers with a 45 mm blade, such as the FX8700 series.

Întrebări frecvente

Este lama originală pentru SkeletonFX GunSteel?

Da. Fișa BaByliss PRO spune că FX707ZGSE este lama de schimb pentru FX7870GSE. Pagina actuală adaugă toate modelele FX7870, FX797E și FX726.

Ce diferență e față de FX707ZE?

Ambele sunt lame T de 40 mm, cu dinți standard de 1,6 mm și reglaj zero-gap. FX707ZGSE e din oțel japonez, iar FX707ZE combină o lamă fixă din titan cu o lamă mobilă DLC.

Livrare și retur

Cost de livrare începând de la 19,90 lei. Livrare gratuită peste 250 lei.

14 zile drept de retur dacă nu ești 100% mulțumit(ă) de produs.

Vezi politica de livrare

Vezi politica de retur