SKU BABFX76E · Cod EAN 3030050201017

BaBylissPRO FreshFX 40 mm Outliner Clipper

Gama: FreshFX

Contour cutter, 40 mm blade

~~€112,95~~ €85,95-23%

Out of stock

Increase must be a multiple of 1 Only 0 left in stock. Please reduce your quantity. Only left in stock. Please reduce your quantity.

Produse 100% originale
Câștigi puncte de loialitate

Vezi politica de livrare

Cost de livrare începând de la 19,90 lei. Livrare gratuită peste 250 lei.

14 zile drept de retur dacă nu ești 100% mulțumit(ă) de produs.

Descriere

BaByliss PRO FreshFX is a 167 g cordless outline trimmer with a fully exposed 40 mm Japanese steel T-blade. The DC motor runs at 6800 RPM, and the blade is zero-gap adjustable for cutting very close to the skin. The brand makes it for all experience levels.

What it does for you

See the line you cut, because the T-blade is fully exposed.
Close-to-skin cut, with zero-gap adjustment made with the included kit and screwdriver.
Clean lines, with the standard 1.6 mm tooth and over a million cutting strokes per minute.
Relaxed hand: it weighs only 167 g and has a non-slip handle, with finger and thumb support.
Up to 90 minutes cordless, and 20 minutes of charging gives you 20 minutes of work.

How to use it at home

Charge it via the USB-C port on the base. The LED flashes while charging and stays lit when it's ready.
Put a drop of oil on the face and sides of the moving blade and wipe off the excess with a soft cloth.
For zero-gap, loosen the screws, push the moving blade with the tool until it reaches the level of the fixed blade or slightly below it, then tighten them.
Trace the outline on dry hair, with the corner of the blade, in short strokes.
At the end, clean the hair with the brush, oil the blade and put on the cap.

For what type of work

It is for outlines, shapes and details: neck, temples, beard line, fine lines. It is a good choice if you are just learning to outline at home. Do not cut the hair all over the head; for that you use the FreshFX clipper.

Specifications

Blade	T, Japanese steel, 40 mm, standard 1.6 mm tooth, corrosion-resistant, zero-gap adjustable
Motor	DC, 6800 RPM, 1,074,400 cutting strokes per minute
Battery	lithium-ion
Autonomy	up to 90 minutes
Charging	140 minutes, USB-C; 20 minutes for 20 minutes of work
Weight	167 g
In the box	blade cap, 1.5 m USB cable and adapter, zero-gap kit with screwdriver, cleaning brush, oil
Warranty	24 months (legal guarantee of conformity)

What else you need

ProBeauty tip. After zero-gap adjustment, pass the blade once lightly over the back of the hand. If you feel a scratch, the moving blade is sticking out over the fixed one and needs to be adjusted again.

Ce să nu faci

Do not rinse the blade, machine, or charger with water.
Do not adjust the zero gap without the included tool; the moving blade must sit 0.3–0.5 mm below the fixed blade.
Do not forget to oil it before and after each use.