Film Wax is Italwax elastic wax in pearls that is removed without strips. Melt it in a wax heater and spread it with a spatula in a thin layer. When it hardens, it becomes a flexible film that you pull off in one motion. Italwax says the wax follows the contours of the area and grabs the hairs close to the skin. That is why it works on the underarms, the bikini area, and the face. It is worked at a lower temperature than classic hot wax.
The range includes several lines. Natural Classic contains natural resins and is worked at around 42 °C. Top Line is synthetic, without pine resin, for sensitive skin, and is worked at 38 °C. Nirvana is an aromatic wax for oil-based hair removal, with lavender or sandalwood. Full Body is for the whole body and is fragrance-free. For the face, you have Selfie and Glowax. For men, there is Pour Homme, for the body, and Barber Edition, for the beard and face.
Choose the line according to your skin and experience. For normal skin, Natural Classic is a good base; for sensitive skin, Top Line. Prepare the skin with a pre-hair removal lotion and a little talc. Spread the wax towards you, regardless of the direction of the hairs, and leave a "petal" to grip. When it no longer sticks to the touch, stretch the skin and pull quickly, parallel to it. At the end, use a soothing product, without oil (for Nirvana, the massage oil in the kit).
Frequently Asked Questions
What is the difference between elastic wax and cartridge wax?
Elastic wax is spread with a spatula, regardless of the direction of the hairs, and is removed without strips, especially on small and delicate areas. Cartridge wax is rolled in the direction of the hair and removed with strips, on the legs, arms, and back.
What do I do if the wax spreads like caramel?
It means it hasn't hardened enough. Italwax recommends putting a little talc on the strip, waiting a few seconds, and then pulling it off. Next time, leave it longer.
25 products
Sort by:
25 products
25 products
ItalWax Elastic Wax Full Body Pearls 100gr
Italwax Elastic Full Body wax is an elastic, gold-colored granular wax. It is a luxurious, premium quality depilatory wax and can be used for full body hair removal. Full Body wax is specially designed for hair removal from any part of the body, even sensitive areas. Its delicate formula gives it special malleability, making it easy to apply with a spatula, both on large body surfaces, such as the back, and on smaller areas. The wax spreads easily and adheres perfectly to the hairs. The elastic wax film, with a silky consistency, can be easily removed from the skin without using depilatory strips and leaves no sticky feeling on the skin or wax residue. For healthy skin and successful hair removal, we recommend using pre- and post-epilation products from the ItalWax range. ItalWax products are created from carefully selected ingredients and with a wide range of professional products that cover all needs. These products can be used both in beauty salons and at home.
Features:
-Luxurious depilatory wax
-Recommended for any skin and hair type
-Ideal for any body surface or the entire body
-Removes even very stiff hair after shaving
-Perfectly molds
-Allows gripping of any hair, even 1mm
How to use:
-Use disposable gloves.
-Pour the required amount of wax into the wax heater container.
-Heat the wax to the appropriate temperature.
-For large areas, it is recommended to use a large spatula.
-Stir the wax occasionally to check the consistency; the wax is ready for application when it reaches the consistency of melted honey.
-Apply a thin layer of wax to the desired area with a spatula in the direction of hair growth.
-Using the edge of the spatula, form a grip area from the wax.
-Wait a few seconds for the wax to harden.
-Pre-stretch and hold the skin in the opposite direction of removal.
-Remove the wax with sudden movements, parallel to the skin.
-If necessary, repeat the procedure.
For a complete procedure and healthy skin, we recommend using pre- and post-epilation products.
Weight: 1000Gr
ItalWax White Chocolate Elastic Wax Beads
This elastic wax in bead form allows hair removal for any skin and hair type, on any body surface, even in hard-to-reach areas. It perfectly conforms to the contours of the area to be epilated, allows grasping very short hairs, even those 1 mm long, and, when used correctly, can remove even very stiff hair after shaving. It is recommended to apply a thin layer with a spatula. It is a medium-density wax containing titanium dioxide. It is characterized by a high level of flexibility that does not create elastic threads. It does not cause irritation or redness on the skin. Effective wax for removing thick and short hairs. It has a pleasant chocolate aroma. Hardening time: 6 - 7 seconds. ItalWax products are created from carefully selected ingredients and offer a wide range of professional products that cover all needs. These products can be used both in beauty salons and at home.
Features:
-Recommended for any skin and hair type
-Ideal for any body surface
-Removes even very stiff hair after shaving
-Perfectly conforms
-Allows grasping any hair, even 1mm long
-Hardening time 6-7 seconds
How to use:
-Use disposable gloves.
-Pour the required amount of wax into the wax heater container.
-Heat the wax to the appropriate temperature.
-For large areas, it is recommended to use a large spatula.
-Stir the wax occasionally to check consistency; the wax is ready for application when it reaches the consistency of melted honey.
-Apply a thin layer of wax to the desired area with a spatula in the direction of hair growth.
-Using the edge of the spatula, form a gripping tab from the wax.
-Wait a few seconds for the wax to harden.
-Stretch and hold the skin taut in the opposite direction of removal.
-Remove the wax with a brisk movement, parallel to the skin.
-If necessary, repeat the procedure.
For a complete procedure and healthy skin, we recommend using pre- and post-epilation products.
Weight: 100Gr
ItalWax Elastic Wax Pink Pearls 1000g
This is an elastic pearl-type wax that allows for easy hair removal in the armpit, bikini, and facial areas and is very effective in removing thick and very short hairs. It is characterized by a high level of flexibility that does not create elastic strands and can be easily used by less experienced individuals, as it has a longer setting time (10-12 seconds). It molds perfectly to the contour of the area to be epilated, allowing it to grip very short hairs, even those as short as 1 mm, and, when used correctly, to remove even very stiff hair after shaving. It is recommended to use a thin layer applied with a spatula. It is a medium-density wax containing titanium dioxide. It does not cause irritation or redness on the skin. It has a pleasant fruity aroma. Setting time: 10-12 seconds. ItalWax products are made from carefully selected ingredients and offer a wide range of professional products that cover all needs. These products can be used in beauty salons as well as at home.
Features:
-Recommended for armpit, bikini, and face areas
-Removes even very stiff hair after shaving
-Molds perfectly
-Allows gripping of any hair, even 1mm long
-Slower setting time 10-12 seconds
How to use:
-Use disposable gloves.
-Pour the required amount of wax into the wax heater container.
-Heat the wax to the appropriate temperature.
-For large areas, it is recommended to use a large spatula.
-Stir the wax from time to time to check the consistency; the wax is ready for application when it reaches the consistency of melted honey.
-Apply a thin layer of wax to the desired area with a spatula in the direction of hair growth.
-Using the edge of the spatula, create a grip area from the wax.
-Wait a few seconds for the wax to set.
-Stretch and hold the skin taut in the opposite direction of removal.
-Remove the wax with quick movements, parallel to the skin.
-If necessary, repeat the procedure.
For a complete procedure and healthy skin, we recommend using pre- and post-epilation products.
Weight: 1000g
ItalWax Elastic Wax Azulene Green Pearls 1000gr
This is an elastic wax with Azulene that allows hair removal for any skin and hair type, on any body surface, even in hard-to-reach areas. It perfectly adapts to the contours of the area to be epilated, allowing each hair to be gripped very close to the skin and offering easy and very efficient hair removal. Azulene has anti-inflammatory, soothing, bacteriostatic, and bactericidal properties. It is recommended to use a thin layer applied with a spatula. The film wax does not break during the depilation procedure. Film wax is an improved version of classic hot wax. Due to the addition of specific and innovative elements, this wax has established and advantageous properties: it has a much lower melting temperature (40-45 ° C).
Azulene Elastic Wax removes all hairs without irritating the skin, reducing the sensation of pain. For healthy skin and successful hair removal, we recommend using pre- and post-epilation products from the ItalWax range. ItalWax products are made from carefully selected ingredients and offer a wide range of professional products that cover all needs. These products can be used both in beauty salons and at home.
Features:
-Recommended for any skin and hair type
-Ideal for any body surface
-Perfectly adapts
-Allows gripping every hair
-Moisturizing effect
-Very low melting temperature (40-45 ° C).
How to use:
-Use disposable gloves.
-Pour the necessary amount of wax into the wax heater container.
-Heat the wax to a temperature of 40°- 45 ° C.
-For large areas, it is recommended to use a large spatula.
-Stir the wax occasionally to check the consistency; the wax is ready for application when it reaches the consistency of melted honey.
-Apply a thin layer of wax to the desired area with a spatula in the direction of hair growth.
-Using the edge of the spatula, form a grip area from the wax.
-Wait a few seconds for the wax to harden.
-Pre-tension and hold the skin in the opposite direction of the tear.
-Remove the wax with quick movements, parallel to the skin.
-If necessary, repeat the procedure.
For a complete procedure and healthy skin, we recommend using pre- and post-epilation products.
Weight: 100Gr
Italwax Selfie Elastic Wax Beads for the face is the pink wax that Italwax created for delicate facial skin. It has a synthetic base, without pine resin, and a complex of natural oils that protects the skin during hair removal. It is worked at 38 °C and is pulled off without strips.
What it does for you
- Clean eyebrows, upper lip and sideburns, because it is designed exactly for these areas.
- It does not burn and does not hurt thin skin, says Italwax, and does not leave redness even on light-colored skin.
- Extra protection thanks to the complex of natural oils in the formula.
- Removes hairs of any length and thickness from the face.
- Fragrance-free, so nothing extra on the sensitive skin of the face.
How to use it at home
- Heat the wax to 38–40 °C.
- Clean the area with a pre-hair removal lotion and apply a little talc.
- Eyebrows: small spatula, short strips, pressed firmly. Upper lip: hold the upper lip over the teeth so the skin is stretched and the spatula perpendicular to the skin.
- Sideburns: for longer hairs apply in the direction of growth and pull off in the opposite direction.
- Lift the end of the strip slightly, wait for it to harden, hold the skin and pull quickly, in the opposite direction of application.
- At the end, soothe the skin with an after-hair removal product.
For what type of skin and area
For the face, on sensitive and thin skin: eyebrows, above the upper lip, sideburns and temples. It is not designed for the body; for underarms or legs choose a Top Line or Full Body wax. For the beard and men's face, Italwax has Pour Homme Barber Edition.
Active ingredients
- Complex of natural oils: according to Italwax, it softens the effect of the wax on the face and provides comfort during hair removal.
Specifications
| Form | elastic wax beads |
|---|---|
| Working temperature | 38 °C |
| Areas | eyebrows, above the upper lip, sideburns, temples |
| Format | 500 g or 100 g bag |
What else you need
- Wax heater with 800 ml container
- Wooden wax spatulas
- Italwax talc powder, small format
- Italwax after-hair removal lotion with azulene
ProBeauty tip. On the face you work with small quantities, so the 100 g bag is good to start with. Take 500 g if you regularly remove hair from the face or for several people in the household.
ItalWax Natural Pearl Elastic Wax – Gentle and Efficient Hair Removal, 1000g
Sold out✨ Pain-free, irritation-free hair removal with professional results!
ItalWax Natural Elastic Wax Beads are the ideal solution for gentle and effective hair removal, suitable for all skin and hair types. Its advanced formula allows for hair removal from the root, without irritating the skin or causing discomfort, making it perfect even for sensitive areas.
🔥 Key advantages:
✔ Suitable for all skin types, including sensitive skin
✔ Excellent adhesion to the hair, without sticking to the skin
✔ Does not break during waxing, providing a clean and efficient process
✔ Low melting temperature (40-45°C) for maximum comfort
✔ Ideal for delicate areas – underarms, bikini line, face, and arms
✔ Applies easily in a thin layer, ensuring economical use
💡 How to apply ItalWax wax?
1️⃣ Heat the wax to 40-45°C until it reaches a honey-like consistency.
2️⃣ Apply a thin layer in the direction of hair growth using a spatula.
3️⃣ Create a grip tab at the edge of the wax layer.
4️⃣ Wait a few seconds until the wax hardens.
5️⃣ Hold the skin taut and remove the wax quickly, parallel to the skin, for optimal results.
6️⃣ For soft, irritation-free skin, apply ItalWax pre- and post-waxing products.
📌 Who is it recommended for?
✔ Beauty salon professionals and home users
✔ Individuals who want irritation-free and less painful hair removal
✔ Anyone looking for a premium waxing wax with long-lasting results
ItalWax Elastic Wax Silver Pearl for Men 1000gr
This elastic wax in pearl form is specially designed for men, allowing for easy depilation. It catches all hairs and guarantees quick removal of thick, typically male hair. It easily removes 100% of unwanted hairs with a single application, reducing pain during the waxing procedure. It does not damage the skin. The Silver Elastic Wax can be used for depilation on all body areas, including the face and nose. It perfectly molds to the contours of the area to be waxed, allowing each hair to be gripped very close to the skin for easy and highly effective depilation. It is recommended to apply a thin layer with a spatula, regardless of the direction of hair growth. The film wax does not break during the depilation procedure. Film wax is an improved version of classic hot wax. Due to the addition of specific and innovative elements, this wax has established and advantageous properties: it has a much lower melting temperature (40-45 ° C). The Elastic Wax for men removes all hairs without irritating the skin, reducing the sensation of pain. For healthy skin and successful hair removal, we recommend using pre- and post-depilation products from the ItalWax range. ItalWax products are created from carefully selected ingredients and offer a wide range of professional products that cover all needs. These products can be used in beauty salons as well as at home.
Features:
-Special wax for men
-Ideal for any body surface
-Molds perfectly
-Allows gripping of any hair
-Very low melting temperature (40-45 ° C).
How to use:
-Use disposable gloves.
-Pour the required amount of wax into the wax heater container.
-Heat the wax to a temperature of 40°- 45 ° C.
-For large areas, a large spatula is recommended.
-Stir the wax occasionally to check its consistency; the wax is ready for application when it reaches the consistency of melted honey.
-Apply a thin layer of wax to the desired area with a spatula in the direction of hair growth.
-Using the edge of the spatula, create a grip tab from the wax.
-Wait a few seconds for the wax to harden.
-Hold and stretch the skin in the opposite direction of removal.
-Remove the wax with quick movements, parallel to the skin.
-If necessary, repeat the procedure.
For a complete procedure and healthy skin, we recommend using pre- and post-depilation products.
Weight: 1000gr
ItalWax Plum Elastic Wax Beads 1000gr
This is an elastic wax in bead form that allows for easy hair removal in the armpit, bikini, and facial areas and is very effective in removing thick and very short hairs. It perfectly conforms to the contours of the area to be waxed, allowing it to grip very short hairs, even those 1mm long, and, when used correctly, can remove even very stubborn hair after shaving. It is recommended to apply a thin layer using a spatula. This is a medium-density wax containing titanium dioxide. It is characterized by a high level of flexibility that does not create elastic strands. It does not cause irritation or redness on the skin. It has a pleasant fruity aroma. Setting time: 6 - 7 seconds. ItalWax products are created from carefully selected ingredients and offer a wide range of professional products that cover all needs. These products can be used both in beauty salons and at home.
Features:
-Recommended for armpit, bikini, and facial areas
-Removes even very stubborn hair after shaving
-Perfectly conforms
-Allows gripping of any hair, even 1mm long
-Setting time 6-7 seconds
How to use:
-Use disposable gloves.
-Pour the necessary amount of wax into the wax heater container.
-Heat the wax to the appropriate temperature.
-For large areas, it is recommended to use a large spatula.
-Stir the wax occasionally to check consistency; the wax is ready for application when it reaches the consistency of melted honey.
-Apply a thin layer of wax to the desired area with a spatula in the direction of hair growth.
-Using the edge of the spatula, form a gripping tab with the wax.
-Wait a few seconds for the wax to harden.
-Stretch and hold the skin taut in the opposite direction of removal.
-Remove the wax with quick movements, parallel to the skin.
-If necessary, repeat the procedure.
For a complete procedure and healthy skin, we recommend using pre- and post-epilation products.
Weight: 1000Gr
ItalWax Nirvana Lavender Elastic Pearl Wax
This is an elastic wax that allows hair removal for any skin and hair type, on any body area, even in hard-to-reach areas. It perfectly conforms to the contours of the area to be epilated, allows each hair to be gripped very close to the skin, and provides easy and very efficient hair removal. It is recommended to apply a thin layer with a spatula. The film wax does not break during the hair removal procedure. Film wax is an improved version of classic hot wax. Thanks to the addition of specific and innovative elements, this wax has established and advantageous properties: it has a much lower melting temperature (40-45 ° C). Nirvana Lavender Elastic Wax removes all hairs without irritating the skin, reducing the sensation of pain. For healthy skin and successful hair removal, we recommend using pre- and post-epilation products from the ItalWax range. ItalWax products are made from carefully selected ingredients and with a wide range of professional products that cover all needs. These products can be used both in beauty salons and at home.
Features:
-Recommended for any skin and hair type
-Ideal for any body area
-Conforms perfectly
-Allows gripping of any hair
-Very low melting temperature (40-45 ° C).
How to use:
-Use disposable gloves.
-Pour the required amount of wax into the wax heater container.
-Heat the wax to a temperature of 40°- 45 ° C.
-For large areas, it is recommended to use a large spatula.
-Stir the wax occasionally to check its consistency; the wax is ready for application when it reaches the consistency of melted honey.
-Apply a thin layer of wax to the desired area with a spatula in the direction of hair growth.
-Using the edge of the spatula, form a grip area with the wax.
-Wait a few seconds for the wax to harden.
-Stretch and hold the skin taut in the opposite direction of removal.
-Remove the wax with sharp movements, parallel to the skin.
-If necessary, repeat the procedure.
For a complete procedure and healthy skin, we recommend using pre- and post-epilation products.
Italwax Top Line Crystal Pearl Elastic Wax is a pearl-white synthetic wax from the Top Line range, designed for sensitive skin. Italwax describes it as the gentlest in the range and highly recommends it for the face. It is used at 38°C and can be removed without strips.
What it does for you
- Epilate the face and allergy-prone skin with a wax free from pine resin and fragrance.
- Low temperature: 38°C, so it does not overheat delicate skin.
- Grips very short hairs, from 1 mm, and coarse hairs, says Italwax.
- Does not break when removed, even when spread over a large area, because it is highly elastic.
- Also suitable for legs and arms, not just small areas.
How to use it at home
- Heat the wax in the wax heater to 38°C.
- Degrease the skin with a pre-epilation foam or lotion and apply a little talcum powder.
- Spread the wax with a spatula in any direction towards you, leaving a border to grip.
- Press the spatula firmly and steadily.
- When it no longer sticks to the touch, stretch the skin and remove it quickly, parallel to the skin.
- Soothe the skin with an oil-free post-epilation product.
For which skin type and area
For sensitive and allergy-prone skin: the face, underarms, and bikini area, and with large strips for legs or arms. The Italwax catalogue recommends it for experienced users. If you are just starting out, Coral, also from Top Line, is easier to work with.
Active ingredients
- Synthetic base, free from pine resin: Italwax makes Top Line wax from synthetic polymers (hydrogenated polycyclopentadiene), without the pine resin that can irritate allergy-prone skin.
Specifications
| Form | synthetic elastic wax pearls |
|---|---|
| Working temperature | 38°C |
| Fragrance | none |
| Size | 750 g zip-lock bag or 100 g bag |
What else you need
- Wax heater with 800 ml container
- Wooden wax spatulas
- Italwax Top Line pre-epilation foam with lime
- Italwax talcum powder for pre-epilation
- Italwax post-epilation lotion with azulene
ProBeauty tip. Close the zip-lock bag tightly after each use. Italwax chose it to keep dust out of the pearls, and a facial wax must stay clean.
Italwax Film Wax Elastic Wax White Chocolate Pearls 500 g is the medium-sized bag of white and creamy wax from the classic Italwax line. It melts in the heater, has a vanilla aroma reminiscent of white chocolate, and pulls off without leaving bands. It is a good format if you epilate a few areas at home without buying a kilogram.
What it does for you
- It gives you time to correct. Italwax describes it as having a longer setting time, suitable for less experienced hands.
- It does not pull out hairs when you pull it off, although it is very plastic.
- It removes short and coarse hairs from the armpits, groin area, and face.
- Creamy consistency, which spreads easily even on larger surfaces.
- You dose it easily. The pearls melt as much as you need, and you keep the rest in the bag.
How to use it at home
- Put only the pearls you need in the heater and melt them at around 42 °C.
- Degrease the skin with a pre-epilation foam or lotion and lightly powder with talc.
- Spread a thin layer, regardless of the direction of the hairs, towards you, and leave a small "petal" to hold at the end.
- When the wax is no longer sticky to the touch, hold the skin taut and pull quickly, parallel to the skin.
- If hairs remain, reapply the wax over them and press the spatula more firmly.
- Finally, soothe the skin with an oil-free post-epilation lotion.
For what type of skin and area
For the face, armpits, and groin area, on normal skin. It is one of the Italwax waxes recommended for those who are just starting, because it sets more slowly. For sensitive or allergic skin, Italwax has the Top Line, synthetic-based line.
Specifications
| Form | elastic wax pearls |
|---|---|
| Working temperature | around 42 °C |
| Areas | face, armpits, groin area |
| Format | 500 g bag |
What else you need
- Wax heater with 800 ml container
- Wooden wax spatulas
- Protective paper for the heater
- Italwax talc powder, small format
- Italwax post-epilation lotion with azulene
ProBeauty tip. Keep the bag well closed and melt only the pearls you need each time. The rest stays in the bag for next time.
Italwax Film Wax Elastic Wax Pink Pearls 500 g is the red wax from the classic line, in a medium-sized bag. It melts in the heater, is spread thinly, and is pulled off like a film, without strips. Because it hardens more slowly, it is suitable if you are a beginner.
What it does for you
- It gives you time. Italwax describes it as having a fairly long hardening time, so you can apply it carefully.
- Removes thick and short hairs from the underarms and the classic bikini area.
- You work without strips: the wax lifts on its own, like an elastic strip.
- Thin layer, clean hair removal: it does not leave broken hairs when applied correctly.
- Medium format, good for home hair removal.
How to use it at home
- Put the wax pearls you need in the heater and melt them at around 42 °C.
- Cleanse the skin with a pre-hair removal foam and lightly powder with talc.
- Spread the wax towards you, in a thin layer, and form a grip edge at the end.
- Press the spatula firmly over the entire strip.
- Wait until it no longer sticks to the touch, stretch the skin and pull off in one motion, parallel to the skin.
- Finish with an oil-free soothing lotion.
For what skin type and area
For normal skin: underarms, classic bikini area, and face. If your skin gets red easily or reacts, choose a Top Line wax, synthetic-based. If you already have a steady hand and want speed, azulena hardens faster.
Specifications
| Form | elastic wax pearls |
|---|---|
| Working temperature | around 42 °C |
| Format | 500 g bag |
What else you need
- Wax heater with 800 ml container
- Wooden wax spatulas
- Italwax talc powder, small format
- Italwax Top Line pre-hair removal foam with lime
- Italwax after-hair removal lotion with azulena
ProBeauty tip. On the underarm, spread the wax in a single application, as Italwax recommends. This way you pass over the sensitive skin there only once and finish faster.
Italwax Top Line Orchid Elastic Wax Beads is a lilac synthetic wax with a delicate orchid fragrance, from the line for sensitive skin. When melted, it is transparent and has a gel consistency, so you can see the hairs through it. It is worked at 38 °C and is pulled off without bands.
What it does for you
- See every hair through the wax, because it is transparent when you spread it.
- Removes hair of any thickness and length, says Italwax.
- Gentle on thin skin: the manufacturer says it does not cause redness.
- Smells nice, like orchid, while you work.
- Sets matte, so you can easily see when it is ready to pull off.
How to use it at home
- Heat the wax to 38 °C.
- Degrease the area with a pre-epilation foam and apply a dusting of talc.
- Spread the wax with a spatula, regardless of the direction of the hairs, towards you.
- Look through the transparent layer: if you see uncovered hairs, press the spatula over them again.
- When the wax becomes matte and no longer sticks, stretch the skin and pull it off quickly, parallel to it.
- Finally, apply an after-epilation lotion.
For what skin type and area
The Italwax catalog recommends it for the underarms and bikini area, on sensitive or allergic skin. It is also used on the legs and arms. It is scented, so if your skin reacts to fragrances, choose a fragrance-free Top Line wax.
Active ingredients
- Synthetic base, without pine resin: Italwax makes Top Line wax from synthetic polymers (hydrogenated polycyclopentadiene), without the pine resin that can irritate allergic skin.
Specifications
| Form | synthetic elastic wax beads |
|---|---|
| Consistency | gel, transparent when melted |
| Working temperature | 38 °C |
| Format | 750 g ziplock bag or 100 g bag |
What else you need
- Wax heater with 800 ml container
- Wooden wax spatulas
- Italwax Top Line pre-epilation foam with lime
- Italwax talc powder for before epilation
- Italwax after-epilation lotion with azulene
ProBeauty tip. Use the color change as a signal: as long as the wax is shiny, wait a little longer. When it becomes matte and no longer sticks to the touch, it is time to pull it off.
Italwax Film Wax Elastic Wax Natural Beads 500 g is a transparent wax from the classic line, in a medium-sized bag. It has a gentle formula, follows the contours of the body, and catches short hairs. You spread it with a spatula and pull it off without strips.
What it does for you
- Catches short hairs and on uneven surfaces, according to Italwax's description.
- Comfort on delicate areas, because it feels slightly warm during application.
- See the hairs through the wax, being transparent.
- Does not leave broken hairs when pulled off correctly, in a single layer.
- Suitable quantity for home hair removal, without having to keep a large bag open.
How to use it at home
- Melt the beads you need in the wax heater, at around 42 °C.
- Cleanse the area with a pre-hair removal foam, wipe it dry, and lightly powder with talc.
- Apply a thin layer, towards you, and leave a small "petal" at the end to grip.
- Press the spatula firmly, so that all the hairs enter the wax.
- When it no longer sticks to the touch, stretch the skin and pull quickly, parallel to it.
- Finally, apply an oil-free soothing lotion.
For what skin type and area
For the face, underarms, and bikini area, on normal skin, according to the Italwax catalog. Italwax says that it feels very slightly warm on the skin. For allergic or reactive skin, choose the Top Line range, which is synthetic-based.
Specifications
| Form | elastic wax beads |
|---|---|
| Appearance | transparent |
| Working temperature | around 42 °C |
| Format | 500 g bag |
What else you need
- Wax heater with 800 ml container
- Wooden wax spatulas
- Italwax talc powder, small size
- Italwax Top Line pre-hair removal foam with lime
- Italwax after-hair removal lotion with azulene
ProBeauty tip. Work on the bikini area with small strips. You can hold onto short hairs more easily with the skin stretched when you pull them off.
Italwax Top Line Elastic Wax Pearls Coral is an orange, creamy synthetic wax from the line for sensitive skin. It has a very strong grip on thick hair and hair grown back after shaving, so it is easy to work with even if you are just learning. It is used at 38°C, without strips.
What it does for you
- Grips thick and shaved hair thanks to its very strong adhesion, says Italwax.
- Easy to use, even if you are a beginner, because it is creamy and easy to apply.
- Good for the bikini area, where the hair is thickest.
- Gentle on the face: the manufacturer says it does not leave redness even on thin, fair skin.
- No pine resin and no fragrance, for sensitive skin.
How to use it at home
- Heat the wax to 38°C.
- Degrease the skin with a pre-epilation foam and powder with a little talc.
- Spread the wax with a spatula in any direction towards you, and form a "petal" at the end.
- Press the spatula down firmly so that the thick hair is completely enveloped in the wax.
- When the wax is no longer sticky, stretch the skin and pull off quickly, parallel to the skin.
- Apply an after-wax lotion at the end.
For what skin type and area
For sensitive or allergy-prone skin: the bikini area, underarms, face, and legs or arms. Italwax also recommends it for beginners. If you want something even gentler for the face and have a steady hand, check out Cristal.
Active ingredients
- Synthetic base, without pine resin: Italwax makes Top Line wax from synthetic polymers (hydrogenated polycyclopentadiene), without the pine resin that can irritate allergy-prone skin.
Specifications
| Form | synthetic elastic wax pearls |
|---|---|
| Consistency | creamy |
| Working temperature | 38°C |
| Size | 750 g zip-lock bag or 100 g bag |
What else you need
- Wax heater with 800 ml container
- Wooden wax spatulas
- Italwax Top Line Formula pre-epilation foam with lemon
- Italwax talc powder for before epilation
- Italwax after-wax lotion with azulene
ProBeauty tip. If you have shaved, wait a few days before epilating. Coral grips short hair grown back after shaving well, but it must protrude slightly from the skin for the wax to catch it.
Italwax Glowax Elastic Wax Beads Cherry Pink 400 g is a pink wax with shimmering particles from the Solo line, for facial hair removal at home. It is made with synthetic resins, without natural pine resins, can be applied in any direction, and can be removed without strips. The packaging says "Made in Italy".
What it does for you
- Remove facial hair at home: upper lip, chin, eyebrows, sideburns, and underarms.
- Removes even short hairs, of any thickness, according to Italwax.
- Leaves no sticky residue and does not irritate the skin, according to the manufacturer.
- Suitable for sensitive skin, as it contains no pine resins.
- Compact 400 g pouch, easy to use at home, according to Italwax.
How to use it at home
- Melt the wax and mix it until it reaches a honey-like consistency, around 38 °C.
- For the first use, apply a small amount of wax to the back of your hand; if there is no reaction after 24 hours, you can use it.
- Cleanse the area of makeup with a pre-epilation gel and apply a thin layer of talc. Tie your hair back.
- Spread a small amount of wax with a spatula, ensuring it is the same thickness in the center and at the edges.
- When it is no longer sticky, stretch the skin and pull off firmly, parallel to the skin.
- Finally, apply an after-epilation emulsion or lotion.
For what skin type and area
For the face and small areas, such as the underarms, including sensitive skin. The Glowax kit instructions do not recommend it for elderly people, diabetics, or those treated with oral retinoids. If you take medications that affect your skin, ask your doctor first.
Specifications
| Form | elastic wax beads, with glitter |
|---|---|
| Working temperature | around 38 °C |
| Areas | upper lip, chin, eyebrows, sideburns, underarms |
| Format | 400 g pouch |
What else you need
- Wax heater with 800 ml container
- Wooden wax spatulas
- Italwax talc powder, small size
- Italwax after-epilation lotion with azulene
ProBeauty tip. Leave at least 72 hours between two epilations, as recommended by Italwax. A slight redness after epilation is normal and usually subsides within a few hours.
Italwax Film Wax Elastic Wax Beads Plum 500 g is a purple, creamy wax from the classic range, with a light fruity scent, in a medium-sized bag. The thick texture coats the hair from the root, and the wax pulls off without leaving strips.
What it does for you
- Catches the shortest hairs, because the dense wax coats them from the root, says Italwax.
- Forgiving for beginners: it hardens more slowly than the fast waxes in the range.
- Does not leave sticky hairs when pulled.
- Pleasant fruity scent during hair removal.
- Practical size for home use, so you don't have to keep a large bag open.
How to use it at home
- Melt only what you need in the wax heater, at around 42 °C.
- Cleanse the skin with a pre-epilation foam and powder with a little talc.
- Apply a thin layer, towards you, and form a gripping edge.
- Press the spatula firmly over the entire surface.
- When it no longer sticks to the touch, stretch the skin and pull quickly, parallel to the skin.
- Finish with an oil-free soothing lotion.
For what skin type and area
For the underarms, bikini area, and face, according to Italwax, including on thin skin. It is from the classic range, with natural resins; if you know that you have wax allergies, choose Top Line. For the legs and back, Full Body wax is more practical.
Specifications
| Form | elastic wax beads |
|---|---|
| Consistency | creamy |
| Working temperature | around 42 °C |
| Size | 500 g bag |
What else you need
- Wax heater with 800 ml container
- Wooden wax spatulas
- Italwax talc powder, small size
- Italwax Top Line pre-epilation foam with lime
- Italwax after-epilation lotion with azulene
ProBeauty tip. Stir the wax in the heater occasionally, so that it melts evenly. Before the first strip, check the temperature on the inside of your wrist.
Italwax Film Wax Elastic Wax with azulene pearls 500 g is the same transparent wax with azulene from the classic line, in a smaller bag. It is fast: it sets quickly, so it is for those who already have a practiced hand. You pull it off without strips, like a film.
What it does for you
- Fast hair removal on small areas. The wax sets quickly and you easily move from one strip to another.
- Catches short and thick hairs from the armpits and groin area.
- Thin layer, because the texture is fluid.
- Does not stick to the skin, but to the hair, according to Italwax's description.
- Azulene extract in the formula, which Italwax gives a soothing effect.
How to use it at home
- Melt in the heater only what you need, at around 42 °C.
- Cleanse the area with a pre-epilation foam and apply a little talc.
- Spread a thin layer, towards you, on a small section, and leave a grip edge.
- Press the spatula firmly, so the hairs enter the wax.
- When the wax is no longer sticky, stretch the skin and pull quickly, parallel to it.
- At the end, apply an oil-free soothing lotion.
For what type of skin and area
For the armpits and groin area, and for the face, on normal skin. It is not the first wax we recommend if you are just starting: it sets quickly. For sensitive skin, Italwax has the Top Line range.
Active ingredients
- Azulene extract: according to Italwax, it has a soothing effect on the skin.
Specifications
| Form | elastic wax pearls |
|---|---|
| Working temperature | around 42 °C |
| Format | 500 g bag |
What else you need
- Wax heater with 800 ml container
- Wooden wax spatulas
- Italwax talc powder, small format
- Italwax Top Line pre-epilation foam with lime
- Italwax after-epilation lotion with azulene
ProBeauty's tip. On the armpit try to work in a single application, as Italwax recommends. If after pulling there are remaining hairs, reapply the wax only there and press the spatula more firmly.
Italwax Top Line Emerald Elastic Wax Beads is an emerald green, semi-transparent, glittery synthetic wax from the line for sensitive skin. Italwax describes it as the most elastic in the Top Line range: it spreads very thinly and is designed for the legs and arms. It is used at 38°C, without strips.
What it does for you
- Easily covers the legs and arms, as it spreads in large strips without breaking.
- You use less: being very elastic, it works in very thin layers.
- Removes short and coarse hairs from the root, without sticking to the skin, says Italwax.
- For sensitive skin: it is synthetic, fragrance-free, and pine resin-free.
- Also suitable for the underarms and bikini area, not just for large areas.
How to use it at home
- Heat the wax to 38°C.
- Degrease the skin with a pre-epilation foam and apply a little talc.
- Spread the wax very thinly with a spatula, in any direction, in long strips.
- Leave a small "petal" at the end to hold onto.
- When it no longer sticks to the touch, stretch the skin and pull off quickly, parallel to it.
- Finally, moisturize the skin with a post-epilation product.
For what skin type and area
For sensitive or allergic skin, preferably on large areas: legs, arms. Italwax also recommends it for the underarms and bikini area. For the face, Top Line has more suitable variants, such as Cristal or Pink Pearl.
Active ingredients
- Synthetic base, without pine resin: Italwax makes Top Line wax from synthetic polymers (hydrogenated polycyclopentadiene), without the pine resin that can irritate allergic skin.
Specifications
| Form | elastic synthetic wax beads |
|---|---|
| Consistency | gel, semi-transparent, with glitter |
| Working temperature | 38°C |
| Fragrance | none |
| Format | 750 g ziplock bag or 100 g bag |
What else you need
- Wax heater with 800 ml container
- Wooden wax spatulas
- Italwax Top Line pre-epilation foam with lime
- Italwax talc powder for before epilation
- Italwax post-epilation lotion with azulene
ProBeauty tip. On the calf, work in long and thin strips: spread the wax towards you, then hold the skin taut with the other hand and pull off in the opposite direction, parallel to the skin.
Italwax Nirvana Sandalwood Elastic Wax Beads is a synthetic wax with sandalwood oil from the oil-based SPA hair removal line. When heated, it has a warm, pronounced aroma. It is free from allergenic components, so it is suitable for sensitive skin and can be removed without strips. Italwax has since renamed the Vanira line, but ours says Nirvana on the bag.
What it does for you
- Turns hair removal into a ritual. The sandalwood aroma can be smelled from the heater.
- The skin is protected by oil during hair removal, as the wax is applied over pre-waxing oil.
- Removes short hairs, including those grown back after shaving.
- Suitable for sensitive skin, with a synthetic base, says Italwax.
- You can apply it in any direction and remove it without strips.
How to use it at home
- Heat the wax to 38 °C.
- Degrease the skin with an alcohol-based lotion.
- Massage a little pre-waxing oil into the skin and blot off the excess with a tissue.
- Spread the wax quickly, regardless of the direction of hair growth, and form a "petal" at the end.
- Leave it for a few seconds to harden, then, with the skin taut, pull it off parallel to the skin.
- Finish with an after-wax care product.
For what skin type and area
For sensitive skin: underarms and bikini area, plus legs, arms, and back. It is used on oil, not talc. It is not for the face; use Selfie there. If you do not like strong scents, Full Body or a fragrance-free Top Line wax are more discreet.
Active ingredients
- Sandalwood oil: gives the wax its aroma and is part of the formula designed for oil-based SPA hair removal.
Specifications
| Form | synthetic elastic wax beads |
|---|---|
| Working temperature | 38 °C |
| Areas | underarms, bikini area, arms, legs, back |
| Size | 1000 g or 100 g bag |
What else you need
- Italwax Nirvana Lavender Pre-Waxing Oil
- Wax heater with 800 ml container
- Wooden wax spatulas
- Italwax talc powder for pre-waxing
- Italwax Lemon After-Waxing Oil
ProBeauty tip. If this is your first time using oil-based hair removal, start with the 100 g bag on one underarm. You will soon realize how much oil to leave on the skin so that the wax adheres properly.
Italwax Pour Homme Barber Edition Elastic Wax Beads for the face is a synthetic wax that Italwax created for men's faces and beard contours. It is metallic petrol blue, fragrance-free, and catches the thick and coarse hairs on the face. It pulls off without bands.
What it does for you
- Precise beard contour. Italwax is for the beard, mustache, eyebrows, sideburns, and the clear hairline.
- Catches the thick and coarse hairs on men's faces, thanks to its increased adhesion.
- Spreads in a thin film and removes short hairs with minimal discomfort, says the manufacturer.
- Fragrance-free, based on synthetic polymers.
- You work at 38–40 °C, a low temperature, suitable for the face and neck.
How to use it at home
- Heat the wax in the heater to 38–40 °C.
- Cleanse the area with a pre-epilation lotion and apply a little talc.
- Take a little wax with a narrow spatula and apply it regardless of the direction of the hairs, pressing firmly.
- Bring the end of the strip towards the area with fewer hairs and lift it gently, so you can catch it.
- Check if the wax has hardened, secure the skin and pull quickly, in the opposite direction of application.
- Move on to the next section, then soothe the skin with a post-epilation product.
For what skin type and area
For men's face and neck: beard contour, mustache, eyebrows, sideburns, and neck. Italwax calls it a hypoallergenic synthetic wax. It is not designed for the chest or back: there you use Pour Homme for the body or Full Body.
Specifications
| Form | elastic wax beads |
|---|---|
| Color | metallic petrol blue |
| Working temperature | 38–40 °C |
| Areas | face, neck |
| Format | 500 g or 100 g bag |
What else you need
- Wax heater with an 800 ml container
- Wooden wax spatulas
- Italwax talc powder, small format
- Italwax post-epilation lotion with azulene
- Italwax post-epilation oil with menthol
ProBeauty tip. Draw the beard contour first by looking in the mirror, on both sides, before the first strip. A line pulled too high cannot be corrected until the hair grows back.
Italwax Top Line Elastic Wax Beads Pink is a glossy, semi-creamy pink synthetic wax from the Top Line range for sensitive skin. Italwax recommends it especially for the face: it removes thick hair from the first application and is gentle on the skin. It is used at 38°C and does not require strips.
What it does for you
- Removes thick hair from the first application, according to Italwax, without having to work over the same area repeatedly.
- Gentle on facial skin, as it is synthetic and contains no pine resin or fragrance.
- Grips the hair well, while its warmth softens the skin, allowing the hair to be removed easily.
- Low working temperature of 38°C, suitable for delicate areas.
- Also suitable for large areas, such as the legs and arms, according to the manufacturer.
How to use it at home
- Heat the wax to 38°C.
- Cleanse the skin with a pre-epilation foam or lotion and apply a little talcum powder.
- Spread the wax with a spatula in any direction, regardless of the direction of hair growth, leaving a small border to grip.
- Press the spatula firmly so that all the hair is covered by the wax.
- When it no longer feels sticky to the touch, stretch the skin and pull the wax off quickly, parallel to the skin.
- Soothe the skin with an after-epilation lotion.
Suitable skin types and areas
Suitable for sensitive or allergy-prone skin, especially on the face, but also for the underarms and bikini area. It can be used on large areas, although Emerald is more economical for the legs. For normal skin, Italwax offers the Classic range.
Active ingredients
- Synthetic base, without pine resin: Italwax makes Top Line wax from synthetic polymers (hydrogenated polycyclopentadiene), without the pine resin that can irritate allergy-prone skin.
Specifications
| Form | synthetic elastic wax beads |
|---|---|
| Consistency | semi-creamy |
| Working temperature | 38°C |
| Size | 750 g zip-lock bag or 100 g bag |
What else you need
- Wax heater with 800 ml container
- Wooden wax spatulas
- Italwax Top Line pre-epilation foam with lime
- Italwax talcum powder, small size
- Italwax after-epilation lotion with allantoïn
ProBeauty tip. When working on the chin and jawline, use strips no wider than a finger. The skin in this area moves a lot, and a short strip makes it easier to keep taut when pulling the wax off.
Italwax Top Line Argan Elastic Wax Beads 100 g is a yellow synthetic wax with argan oil, from the line for sensitive skin. When melted, it becomes completely transparent and has a gel consistency. The 100 g bag is good for trying the wax or for small areas.
What it does for you
- Good grip on all hair types, including short and coarse ones, says Italwax.
- Lightly nourishing effect, thanks to the argan oil in the formula.
- See the hairs through the wax, as it is transparent when spread.
- Spreads in large strips without breaking, for legs, arms, or back.
- No pine resin, for skin that is prone to allergies.
How to use it at home
- Heat the wax to 38 °C.
- Degrease the skin with a pre-epilation foam and lightly powder with talc.
- Spread a thin layer with a spatula, regardless of the direction of the hairs.
- Leave a gripping edge and press the spatula down well.
- When the wax no longer sticks to the touch, stretch the skin and pull off quickly, parallel to it.
- Finish with an after-epilation lotion.
For what type of skin and area
For sensitive, dry, or easily reddened skin, according to the Italwax catalog. It works on the underarms, groin area, and body: legs, arms, back, abdomen, chest. The catalog also lists it for the face, but on the face, work with small strips.
Active ingredients
- Argan oil: according to Italwax, it gives the wax a lightly nourishing effect on the skin.
- Synthetic base, without pine resin: like the entire Top Line line, for skin prone to allergies.
Specifications
| Form | synthetic elastic wax beads |
|---|---|
| Consistency | gel, transparent when melted |
| Working temperature | 38 °C |
| Format | 100 g bag |
What else you need
- Wax heater with 800 ml container
- Wooden wax spatulas
- Italwax Top Line pre-epilation foam with lime
- Italwax talc powder, small format
- Italwax after-epilation lotion with azulene
ProBeauty tip. With the 100 g bag, first do a test on a small area, for example, an underarm. See how your skin reacts to the Top Line wax before using it on your whole body.
ItalWax Sandal Nirvana Waxing Kit
The Sandal Nirvana Waxing Kit contains 3 amazing products for SPA procedures to remove unwanted hair in a pleasant and ambient atmosphere. The ItalWax Sandal Nirvana line consists of several complementary products for the depilation procedure. It can be used in beauty salons, SPA centers, or at home. The Aromatic SPA procedure consists of several steps. At each stage, products are used that perfectly complement each other and ensure perfect skin care.
The Sandal Nirvana Waxing Kit contains:
1 Sandal Nirvana Pre-Wax Oil
1 Kg ItalWax Sandal Nirvana Elastic Pearl Wax
1 ItalWax Sandal Nirvana Massage Candle 50ml
Instructions for use:
Sandal Nirvana Pre-Wax Oil:
Apply to clean skin, preparing the skin for the waxing procedure.
Apply a small amount of oil to the area to be waxed, then gently massage into the skin.
ItalWax Sandal Nirvana Elastic Pearl Wax
-Pour the required amount of wax into the wax warmer container.
-Heat the wax to a temperature of 40°- 45° C.
-For large areas, it is recommended to use a large spatula.
-Stir the wax occasionally to check the consistency; the wax is ready for application when it reaches the consistency of melted honey.
-Apply a thin layer of wax to the desired area with a spatula in the direction of hair growth.
-Using the edge of the spatula, form a grip area from the wax.
-Wait a few seconds for the wax to harden.
-Stretch and hold the skin in the opposite direction of removal.
-Remove the wax with quick movements, parallel to the skin.
-Repeat the procedure if necessary.
ItalWax Sandal Nirvana Massage Candle
Let the candle burn for 5-10 minutes until enough melted massage oil forms. Then, extinguish the flame, pour the obtained oil into your palms or directly onto the skin and begin the massage (the wax should be warm, but not hot). Do not use the heated product directly on the face. Avoid contact with eyes. Do not leave the candle unattended. Keep the lit candle away from flammable objects. Keep out of reach of children.
The Italwax Nirvana Kit for lavender hair removal brings together three products from the Nirvana SPA line in one box: a massage candle, a bag of stretchy pearl wax, and a pre-hair removal oil, all with a lavender scent. It is designed for aromatic oil-based hair removal, and the box makes it suitable as a gift. Meanwhile, Italwax has renamed the Vanira line, but our box says Nirvana.
What it does for you
- The entire hair removal ritual in one box, with products designed to work together.
- Skin prepared with oil: the pre-hair removal oil gently prepares the skin and leaves it feeling silky afterwards, says Italwax.
- Wax for sensitive skin, with a synthetic base and lavender oil.
- A warm massage at the end: the candle melts into an oil that you spread over the skin.
- A relaxing lavender scent, which can be smelled from the heater until the end.
How to use it at home
- Light the massage candle before you start.
- Melt the wax in the heater at 38 °C.
- Cleanse the skin, massage in a little pre-hair removal oil, and wipe off the excess with a tissue.
- Apply the wax in any direction, leave a "petal" at the end, and, after a few seconds, pull it off parallel to the skin.
- Blow out the candle and massage the hair-removed skin with the warm melted oil.
For what skin type and area
For sensitive skin, on the underarms, bikini area, legs, arms, and back. It is not a face kit. The heater and spatulas are not in the box, so check that you have them before hair removal.
Active ingredients
- Lavender oil: in Nirvana wax, for fragrance and a relaxing effect, says Italwax.
What else you need
- Wax heater with an 800 ml container
- Wooden wax spatulas
- Italwax Nirvana pre-hair removal oil with lavender
- Italwax post-hair removal oil with lemon
ProBeauty tip. Keep the pre-hair removal oil after you finish the wax from the kit: you can also find it separately, with the same lavender scent, and use it with a new bag of Nirvana wax.
PROBEAUTY RETAIL
Comenzi si informatii: +40784 291 207
(De luni pana vineri: 08:00-17:00)
Email: office@probeauty.ro
Str. Iosif Vulcan 13, Salonta, Jud. Bihor, Romania
Departamentul Service: 0373809365
De luni pana vineri: 08:00-17:00)
