Italwax

ItalWax Elastic Wax Full Body Pearls 100gr

Italwax Elastic Full Body wax is an elastic, gold-colored granular wax. It is a luxurious, premium quality depilatory wax and can be used for full body hair removal. Full Body wax is specially designed for hair removal from any part of the body, even sensitive areas. Its delicate formula gives it special malleability, making it easy to apply with a spatula, both on large body surfaces, such as the back, and on smaller areas. The wax spreads easily and adheres perfectly to the hairs. The elastic wax film, with a silky consistency, can be easily removed from the skin without using depilatory strips and leaves no sticky feeling on the skin or wax residue. For healthy skin and successful hair removal, we recommend using pre- and post-epilation products from the ItalWax range. ItalWax products are created from carefully selected ingredients and with a wide range of professional products that cover all needs. These products can be used both in beauty salons and at home.

Features:

-Luxurious depilatory wax

-Recommended for any skin and hair type

-Ideal for any body surface or the entire body

-Removes even very stiff hair after shaving

-Perfectly molds

-Allows gripping of any hair, even 1mm

How to use:

-Use disposable gloves.

-Pour the required amount of wax into the wax heater container.

-Heat the wax to the appropriate temperature.

-For large areas, it is recommended to use a large spatula.

-Stir the wax occasionally to check the consistency; the wax is ready for application when it reaches the consistency of melted honey.

-Apply a thin layer of wax to the desired area with a spatula in the direction of hair growth.

-Using the edge of the spatula, form a grip area from the wax.

-Wait a few seconds for the wax to harden.

-Pre-stretch and hold the skin in the opposite direction of removal.

-Remove the wax with sudden movements, parallel to the skin.

-If necessary, repeat the procedure.

For a complete procedure and healthy skin, we recommend using pre- and post-epilation products.

Weight: 1000Gr

ItalWax White Chocolate Elastic Wax Beads

This elastic wax in bead form allows hair removal for any skin and hair type, on any body surface, even in hard-to-reach areas. It perfectly conforms to the contours of the area to be epilated, allows grasping very short hairs, even those 1 mm long, and, when used correctly, can remove even very stiff hair after shaving. It is recommended to apply a thin layer with a spatula. It is a medium-density wax containing titanium dioxide. It is characterized by a high level of flexibility that does not create elastic threads. It does not cause irritation or redness on the skin. Effective wax for removing thick and short hairs. It has a pleasant chocolate aroma. Hardening time: 6 - 7 seconds. ItalWax products are created from carefully selected ingredients and offer a wide range of professional products that cover all needs. These products can be used both in beauty salons and at home.

Features:

-Recommended for any skin and hair type

-Ideal for any body surface

-Removes even very stiff hair after shaving

-Perfectly conforms

-Allows grasping any hair, even 1mm long

-Hardening time 6-7 seconds

How to use:

-Use disposable gloves.

-Pour the required amount of wax into the wax heater container.

-Heat the wax to the appropriate temperature.

-For large areas, it is recommended to use a large spatula.

-Stir the wax occasionally to check consistency; the wax is ready for application when it reaches the consistency of melted honey.

-Apply a thin layer of wax to the desired area with a spatula in the direction of hair growth.

-Using the edge of the spatula, form a gripping tab from the wax.

-Wait a few seconds for the wax to harden.

-Stretch and hold the skin taut in the opposite direction of removal.

-Remove the wax with a brisk movement, parallel to the skin.

-If necessary, repeat the procedure.

For a complete procedure and healthy skin, we recommend using pre- and post-epilation products.

Weight: 100Gr

ItalWax Lemon Post-Epilation Oil

This post-epilation oil has a cleansing, hydrating, and soothing effect, enriched with lemon essential oil and Vitamins A, B, P, C. The lemon essential oil extract contains various organic acids: citric, malic, and ascorbic. The post-epilation oil completes the epilation process, improving the skin's appearance after waxing. Lemon post-epilation oil helps remove wax residues and eliminates the sticky sensation that can occur after waxing.

Features:

-Cleanses the skin of sticky wax residues after the procedure

-Hydrates

-Soothes

-Carefully selected ingredients

How to use: Spray the oil directly onto the depilated skin and gently massage into the skin to cleanse the depilated skin of sticky wax residues and soothe irritated skin.

ItalWax Elastic Wax Pink Pearls 1000g

This is an elastic pearl-type wax that allows for easy hair removal in the armpit, bikini, and facial areas and is very effective in removing thick and very short hairs. It is characterized by a high level of flexibility that does not create elastic strands and can be easily used by less experienced individuals, as it has a longer setting time (10-12 seconds). It molds perfectly to the contour of the area to be epilated, allowing it to grip very short hairs, even those as short as 1 mm, and, when used correctly, to remove even very stiff hair after shaving. It is recommended to use a thin layer applied with a spatula. It is a medium-density wax containing titanium dioxide. It does not cause irritation or redness on the skin. It has a pleasant fruity aroma. Setting time: 10-12 seconds. ItalWax products are made from carefully selected ingredients and offer a wide range of professional products that cover all needs. These products can be used in beauty salons as well as at home.

Features:

-Recommended for armpit, bikini, and face areas

-Removes even very stiff hair after shaving

-Molds perfectly

-Allows gripping of any hair, even 1mm long

-Slower setting time 10-12 seconds

How to use:

-Use disposable gloves.

-Pour the required amount of wax into the wax heater container.

-Heat the wax to the appropriate temperature.

-For large areas, it is recommended to use a large spatula.

-Stir the wax from time to time to check the consistency; the wax is ready for application when it reaches the consistency of melted honey.

-Apply a thin layer of wax to the desired area with a spatula in the direction of hair growth.

-Using the edge of the spatula, create a grip area from the wax.

-Wait a few seconds for the wax to set.

-Stretch and hold the skin taut in the opposite direction of removal.

-Remove the wax with quick movements, parallel to the skin.

-If necessary, repeat the procedure.

For a complete procedure and healthy skin, we recommend using pre- and post-epilation products.

Weight: 1000g

ItalWax Elastic Wax Azulene Green Pearls 1000gr

This is an elastic wax with Azulene that allows hair removal for any skin and hair type, on any body surface, even in hard-to-reach areas. It perfectly adapts to the contours of the area to be epilated, allowing each hair to be gripped very close to the skin and offering easy and very efficient hair removal. Azulene has anti-inflammatory, soothing, bacteriostatic, and bactericidal properties. It is recommended to use a thin layer applied with a spatula. The film wax does not break during the depilation procedure. Film wax is an improved version of classic hot wax. Due to the addition of specific and innovative elements, this wax has established and advantageous properties: it has a much lower melting temperature (40-45 ° C).
Azulene Elastic Wax removes all hairs without irritating the skin, reducing the sensation of pain. For healthy skin and successful hair removal, we recommend using pre- and post-epilation products from the ItalWax range. ItalWax products are made from carefully selected ingredients and offer a wide range of professional products that cover all needs. These products can be used both in beauty salons and at home.

Features:

-Recommended for any skin and hair type

-Ideal for any body surface

-Perfectly adapts

-Allows gripping every hair

-Moisturizing effect

-Very low melting temperature (40-45 ° C).

How to use:

-Use disposable gloves.

-Pour the necessary amount of wax into the wax heater container.

-Heat the wax to a temperature of 40°- 45 ° C.

-For large areas, it is recommended to use a large spatula.

-Stir the wax occasionally to check the consistency; the wax is ready for application when it reaches the consistency of melted honey.

-Apply a thin layer of wax to the desired area with a spatula in the direction of hair growth.

-Using the edge of the spatula, form a grip area from the wax.

-Wait a few seconds for the wax to harden.

-Pre-tension and hold the skin in the opposite direction of the tear.

-Remove the wax with quick movements, parallel to the skin.

-If necessary, repeat the procedure.

For a complete procedure and healthy skin, we recommend using pre- and post-epilation products.

Weight: 100Gr

ItalWax Aloe Vera Cartridge Wax 100ml

ItalWax Aloe Vera Cartridge Wax is a high-adherence wax, ideal for waxing fine and short hairs, and is used with waxing strips. It has medium plasticity, which allows for efficient and quick hair removal. It contains natural and synthetic resins, a balanced blend enriched with innovative ingredients, and Aloe Vera gives this wax analgesic and anti-inflammatory properties for the skin and helps its quick recovery after waxing. Once solidified, it forms a thin film on the skin, capturing all hair and ensuring a firm grip on the waxing strip. It does not leave the skin sticky. It removes 100% of hair without breaking it. The addition of Aloe Vera restores the skin's nutritional and protein balance, providing optimal hydration during the waxing process, whether at the salon or at home. For healthy skin and successful hair removal, we recommend using pre- and post-waxing products from the ItalWax range. ItalWax products are made from carefully selected ingredients and offer a wide range of professional products that cover all needs. These products can be used both in beauty salons and at home.

Features:

-Used with waxing strips

-Disposable cartridge wax

-Recommended for fine and short hair

-Ideal for any body area

-Molds perfectly

-Very low melting temperature (40°C).

How to use:

-Use disposable gloves.

-Heat the wax in the wax heater to 40°C.

-It is recommended to use a thin layer.

-The wax is ready to apply when it reaches the consistency of melted honey.

-Apply a thin layer of wax to the desired area using the built-in roller applicator.

-Apply the waxing strip to the waxed skin, leaving room to grip.

-Wait a few seconds for the wax to harden.

-Stretch and hold the skin in the opposite direction of removal.

-Remove the waxing strip with a sharp, swift motion, parallel to the skin.

-If necessary, repeat the procedure.

For a complete procedure and healthy skin, we recommend using pre- and post-waxing products.

Weight: 100Gr

Italwax Selfie Elastic Wax Beads for the face is the pink wax that Italwax created for delicate facial skin. It has a synthetic base, without pine resin, and a complex of natural oils that protects the skin during hair removal. It is worked at 38 °C and is pulled off without strips.

What it does for you

• Clean eyebrows, upper lip and sideburns, because it is designed exactly for these areas.
• It does not burn and does not hurt thin skin, says Italwax, and does not leave redness even on light-colored skin.
• Extra protection thanks to the complex of natural oils in the formula.
• Removes hairs of any length and thickness from the face.
• Fragrance-free, so nothing extra on the sensitive skin of the face.

How to use it at home

1. Heat the wax to 38–40 °C.
2. Clean the area with a pre-hair removal lotion and apply a little talc.
3. Eyebrows: small spatula, short strips, pressed firmly. Upper lip: hold the upper lip over the teeth so the skin is stretched and the spatula perpendicular to the skin.
4. Sideburns: for longer hairs apply in the direction of growth and pull off in the opposite direction.
5. Lift the end of the strip slightly, wait for it to harden, hold the skin and pull quickly, in the opposite direction of application.
6. At the end, soothe the skin with an after-hair removal product.

For what type of skin and area

For the face, on sensitive and thin skin: eyebrows, above the upper lip, sideburns and temples. It is not designed for the body; for underarms or legs choose a Top Line or Full Body wax. For the beard and men's face, Italwax has Pour Homme Barber Edition.

Active ingredients

• Complex of natural oils: according to Italwax, it softens the effect of the wax on the face and provides comfort during hair removal.

Specifications

What else you need

• Wax heater with 800 ml container
• Wooden wax spatulas
• Italwax talc powder, small format
• Italwax after-hair removal lotion with azulene

ProBeauty tip. On the face you work with small quantities, so the 100 g bag is good to start with. Take 500 g if you regularly remove hair from the face or for several people in the household.

Italwax Orange After-Wax Lotion removes hot wax residue and adhesive from the skin. It helps soothe and moisturize freshly waxed skin. It has a lightly cooling effect and a natural orange peel scent.

What it does for you

• Leaves no wax residue or sticky feeling on the skin.
• Soothes and moisturizes the skin after hair removal.
• Lightly cooling thanks to the menthol in the formula.
• Non-sticky: absorbs well and dries quickly.
• Orange scent and natural orange color from the terpene in the fruit peel.

How to use it at home

1. Finish hot waxing.
2. Spray the lotion onto the waxed area.
3. Spread it with gentle motions.
4. Wipe away the excess with a tissue, along with the wax residue.

For what skin type and area

Italwax recommends it after hot waxing on large areas: arms and legs. It is suitable if you want a fresh feeling. You do not need it for sugar paste residue: sugar paste is removed with water.

Active ingredients

• Orange oil and terpene: provide the natural orange scent and color.
• Menthol: provides the lightly cooling effect.

Specifications

What else you need

• Italwax Hot Wax Cartridge, Banana
• Italwax Hot Wax with Honey, 400 ml Tin
• 100 ml Cartridge Heater
• Italwax Top Line Pre-Waxing Foam with Lime
• Italwax Cosmetic Talc Powder

ProBeauty Tip. Spray from arm's length away and work in sections, leg by leg. This way, you won't waste lotion on the floor and can wipe away the residue while the wax is still soft.

✨ Pain-free, irritation-free hair removal with professional results!

ItalWax Natural Elastic Wax Beads are the ideal solution for gentle and effective hair removal, suitable for all skin and hair types. Its advanced formula allows for hair removal from the root, without irritating the skin or causing discomfort, making it perfect even for sensitive areas.

🔥 Key advantages:

✔ Suitable for all skin types, including sensitive skin

✔ Excellent adhesion to the hair, without sticking to the skin

✔ Does not break during waxing, providing a clean and efficient process

✔ Low melting temperature (40-45°C) for maximum comfort

✔ Ideal for delicate areas – underarms, bikini line, face, and arms

✔ Applies easily in a thin layer, ensuring economical use

💡 How to apply ItalWax wax?

1️⃣ Heat the wax to 40-45°C until it reaches a honey-like consistency.

2️⃣ Apply a thin layer in the direction of hair growth using a spatula.

3️⃣ Create a grip tab at the edge of the wax layer.

4️⃣ Wait a few seconds until the wax hardens.

5️⃣ Hold the skin taut and remove the wax quickly, parallel to the skin, for optimal results.

6️⃣ For soft, irritation-free skin, apply ItalWax pre- and post-waxing products.

📌 Who is it recommended for?

✔ Beauty salon professionals and home users

✔ Individuals who want irritation-free and less painful hair removal

✔ Anyone looking for a premium waxing wax with long-lasting results

ItalWax Elastic Wax Silver Pearl for Men 1000gr

This elastic wax in pearl form is specially designed for men, allowing for easy depilation. It catches all hairs and guarantees quick removal of thick, typically male hair. It easily removes 100% of unwanted hairs with a single application, reducing pain during the waxing procedure. It does not damage the skin. The Silver Elastic Wax can be used for depilation on all body areas, including the face and nose. It perfectly molds to the contours of the area to be waxed, allowing each hair to be gripped very close to the skin for easy and highly effective depilation. It is recommended to apply a thin layer with a spatula, regardless of the direction of hair growth. The film wax does not break during the depilation procedure. Film wax is an improved version of classic hot wax. Due to the addition of specific and innovative elements, this wax has established and advantageous properties: it has a much lower melting temperature (40-45 ° C). The Elastic Wax for men removes all hairs without irritating the skin, reducing the sensation of pain. For healthy skin and successful hair removal, we recommend using pre- and post-depilation products from the ItalWax range. ItalWax products are created from carefully selected ingredients and offer a wide range of professional products that cover all needs. These products can be used in beauty salons as well as at home.

Features:

-Special wax for men

-Ideal for any body surface

-Molds perfectly

-Allows gripping of any hair

-Very low melting temperature (40-45 ° C).

How to use:

-Use disposable gloves.

-Pour the required amount of wax into the wax heater container.

-Heat the wax to a temperature of 40°- 45 ° C.

-For large areas, a large spatula is recommended.

-Stir the wax occasionally to check its consistency; the wax is ready for application when it reaches the consistency of melted honey.

-Apply a thin layer of wax to the desired area with a spatula in the direction of hair growth.

-Using the edge of the spatula, create a grip tab from the wax.

-Wait a few seconds for the wax to harden.

-Hold and stretch the skin in the opposite direction of removal.

-Remove the wax with quick movements, parallel to the skin.

-If necessary, repeat the procedure.

For a complete procedure and healthy skin, we recommend using pre- and post-depilation products.

Weight: 1000gr

ItalWax Strawberry Cartridge Wax 100ml

ItalWax Strawberry Cartridge Depilatory Wax 100 ml is specially designed to remove medium, thick, and short hair. This type of wax ensures perfect adhesion to the hair and is used with depilatory strips. It is a non-transparent wax, clearly visible on the skin, with a very pleasant strawberry scent. Applied in a thin layer, it efficiently removes all hairs from any area of the body. Due to its high adhesive strength, hairs are quickly trapped in the wax film, making epilation much faster and more efficient. It leaves the skin soft and smooth, without that unpleasant sticky sensation after use. For healthy skin and successful depilation, we recommend using ItalWax pre- and post-epilation products. ItalWax products are made from carefully selected ingredients and feature a wide range of professional products that cover all professional depilation needs. These products can be used in beauty salons as well as at home.

Features:

-Used with depilatory strips

-Single-use cartridge wax with a wide applicator

-Recommended for medium, thick, and short hair

-Ideal for any area of the body

-Suitable for all skin types

-Molds perfectly

-Very low melting temperature (37-39 ° C)

-Pleasant strawberry aroma

How to use:

-Use disposable gloves.

-Heat the wax in the wax heater to a temperature of 37-39 ° C.

-It is recommended to apply a thin layer

-The wax is ready for application when it reaches the consistency of melted honey.

-Apply the wax in a thin layer to the desired area using the built-in roller applicator.

-Apply the depilatory strip over the wax spread on the skin, leaving space to grip.

-Wait a few seconds for the wax to harden.

-Stretch and hold the skin taut in the opposite direction of the pull.

-Remove the depilatory strip with a sudden motion, parallel to the skin.

-If necessary, repeat the procedure.

For a complete procedure and healthy skin, we recommend using pre- and post-epilation products.

Weight: 100g

ItalWax White Chocolate Cartridge Wax 100ml

ItalWax White Chocolate 100 ml Cartridge Wax is specially formulated to remove medium, thick, coarse and short hair. This type of wax ensures perfect adhesion to the hair and is used with waxing strips. It is a non-transparent wax, clearly visible on the skin with a very pleasant white chocolate scent. Applied in a thin layer, it effectively removes all hair from any body surface. Due to its high adhesiveness, hair is quickly caught in the wax film, making epilation much faster and more efficient. It leaves the skin soft and smooth, without that unpleasant sticky sensation after use. For healthy skin and successful epilation, we recommend using pre- and post-epilation products from the ItalWax range. ItalWax products are made from carefully selected ingredients and offer a wide range of professional products that cover all professional epilation needs. These products can be used both in beauty salons and at home.

Features:

-To be used with waxing strips

-Disposable cartridge wax with a wide applicator

-Recommended for medium, thick, coarse and short hair

-Ideal for any area of the body

-Suitable for all skin types

-Molds perfectly

-Very low melting temperature (37-39 ° C)

-Pleasant white chocolate aroma

How to use:

-Use disposable gloves.

-Heat the wax in a wax heater to a temperature of 37-39 ° C.

-It is recommended to apply in a thin layer

-The wax is ready for application when it reaches the consistency of melted honey.

-Apply a thin layer of wax to the desired area using the built-in roller applicator

-Apply the waxing strip to the wax spread on the skin, leaving space to grip.

-Wait a few seconds for the wax to harden.

-Stretch and hold the skin in the opposite direction of removal.

-Remove the waxing strip with a sharp, swift motion, parallel to the skin.

-If necessary, repeat the procedure.

For a complete procedure and healthy skin, we recommend using pre- and post-epilation products.

Weight: 100Gr

ItalWax Oud Flex Cartridge Wax 100ml

ItalWax Oud Flex 100ml Oil-Soluble Depilatory Wax is part of the SPA line and is specially designed to remove medium to coarse and thick hair. This type of wax ensures perfect adhesion to the hair and is used with depilatory strips. It is a non-transparent wax, clearly visible on the skin with a very pleasant and relaxing scent. Applied in a thin layer, it efficiently removes all hair from any part of the body. Due to its high adhesiveness, hairs are quickly trapped in the wax film, making epilation much faster and more efficient. It leaves the skin smooth and soft, without that unpleasant sticky feeling after use. For healthy skin and successful epilation, we recommend using pre- and post-epilation products from the ItalWax range. ItalWax products are made from carefully selected ingredients and feature a wide range of professional products that cover all professional epilation needs. These products can be used both in beauty salons and at home.

Features:

-Used with depilatory strips

-Disposable cartridge wax with a wide applicator

-Recommended for medium to thick hair

-Ideal for any body area

-Suitable for all skin types

-Conforms perfectly

-Very low melting temperature (37-39°C)

-Very pleasant and relaxing scent

How to use:

-Use disposable gloves.

-Heat the wax in the wax heater to a temperature of 37-39°C.

-It is recommended to apply a thin layer.

-The wax is ready for application when it reaches the consistency of melted honey.

-Apply a thin layer of wax to the desired area using the built-in roller applicator.

-Apply the depilatory strip over the wax spread on the skin, leaving space to grip.

-Wait a few seconds for the wax to harden.

-Stretch and hold the skin taut in the opposite direction of removal.

-Remove the depilatory strip with a brisk motion, parallel to the skin.

-If necessary, repeat the procedure.

For a complete procedure and healthy skin, we recommend using pre- and post-epilation products.

Weight: 100g

ItalWax Plum Elastic Wax Beads 1000gr

This is an elastic wax in bead form that allows for easy hair removal in the armpit, bikini, and facial areas and is very effective in removing thick and very short hairs. It perfectly conforms to the contours of the area to be waxed, allowing it to grip very short hairs, even those 1mm long, and, when used correctly, can remove even very stubborn hair after shaving. It is recommended to apply a thin layer using a spatula. This is a medium-density wax containing titanium dioxide. It is characterized by a high level of flexibility that does not create elastic strands. It does not cause irritation or redness on the skin. It has a pleasant fruity aroma. Setting time: 6 - 7 seconds. ItalWax products are created from carefully selected ingredients and offer a wide range of professional products that cover all needs. These products can be used both in beauty salons and at home.

Features:

-Recommended for armpit, bikini, and facial areas

-Removes even very stubborn hair after shaving

-Perfectly conforms

-Allows gripping of any hair, even 1mm long

-Setting time 6-7 seconds

How to use:

-Use disposable gloves.

-Pour the necessary amount of wax into the wax heater container.

-Heat the wax to the appropriate temperature.

-For large areas, it is recommended to use a large spatula.

-Stir the wax occasionally to check consistency; the wax is ready for application when it reaches the consistency of melted honey.

-Apply a thin layer of wax to the desired area with a spatula in the direction of hair growth.

-Using the edge of the spatula, form a gripping tab with the wax.

-Wait a few seconds for the wax to harden.

-Stretch and hold the skin taut in the opposite direction of removal.

-Remove the wax with quick movements, parallel to the skin.

-If necessary, repeat the procedure.

For a complete procedure and healthy skin, we recommend using pre- and post-epilation products.

Weight: 1000Gr

Italwax Cosmetic Talc Powder 150 g is a fine, highly purified talc for preparing the skin before hair removal. Use it with pearl elastic wax, hot wax, and sugar paste. It contains no zinc oxide or starch.

What it does for you

• Keeps skin dry: the talc quickly absorbs moisture from the area.
• Wax adheres better, making hair removal more effective.
• No zinc oxide: Italwax says it does not irritate the skin.
• Does not clump on damp skin and is easy to remove without leaving a residue.
• Use it at any stage: before, during, and after hair removal.

How to use it at home

1. Cleanse the skin with a pre-hair removal lotion or foam and let it dry.
2. Apply a little talc to the area to be treated.
3. Spread it evenly with the palm of your hand.
4. Apply the wax or sugar paste.
5. If the skin starts to sweat during the process, apply a little more talc.

For what skin type and area

For the whole body. Italwax especially recommends it for delicate areas where the skin needs to be dried quickly during hair removal. If you sweat a lot, such as under the arms, the Help Line antiperspirant powder is specially designed for this.

Active ingredients

• Fine cosmetic talc: absorbs moisture and helps the wax grip the hair.

Specifications

What else you need

• Italwax Strong Sugar Paste 600 g
• Italwax Natural Pearl Elastic Wax
• Italwax Natural Hot Wax Cartridge
• Italwax Top Line Pre-Hair Removal Foam with Lime
• Italwax After-Hair Removal Oil with Lemon

ProBeauty Tip. When using sugar paste, talc is a lifesaver when the paste sticks. Dust a little around the stuck area, pull the paste over the talc, and remove it quickly.

ItalWax Honey Cartridge Wax 100ml

ItalWax 100 ml Honey Liposoluble Depilatory Wax is specially formulated to remove thin to medium and fine hair. This type of wax ensures perfect adhesion to the hair and is used with depilatory strips. It is clearly visible on the skin with a very subtle and pleasant honey scent. Applied in a thin layer, it effectively removes all hairs from any body surface. Due to its high adhesiveness, hairs are quickly caught in the wax film, making epilation much faster and more efficient. It leaves the skin smooth and soft, without that unpleasant sticky feeling after use. For healthy skin and successful epilation, we recommend using pre- and post-epilation products from the ItalWax range. ItalWax products are created from carefully selected ingredients and offer a wide range of professional products that cover all professional epilation needs. These products can be used both in beauty salons and at home.

Features:

- Used with depilatory strips

- Disposable cartridge wax with wide applicator

- Recommended for thin to medium and fine hair

- Ideal for any body area

- Suitable for all skin types

- Molds perfectly

- Very low melting temperature (37-39 ° C)

How to use:

- Use disposable gloves.

- Heat the wax in the wax heater to a temperature of 37-39 ° C.

- It is recommended to use in a thin layer

- The wax is ready for application when it reaches the consistency of melted honey.

- Apply a thin layer of wax to the desired area using the built-in roller applicator

- Apply the depilatory strip over the wax spread on the skin, leaving space to grip.

- Wait a few seconds for the wax to harden.

- Stretch and hold the skin taut in the opposite direction of removal.

- Remove the depilatory strip with a sudden movement, parallel to the skin.

- If necessary, repeat the procedure.

For a complete procedure and healthy skin, we recommend using pre- and post-epilation products.

Weight: 100g

ItalWax Natural Cartridge Wax 100ml

ItalWax Natural 100ml Oil-Soluble Depilatory Wax is specially formulated to remove thin to medium and fine hair. This type of wax ensures perfect adhesion to the hair and is used with depilatory strips. It is a wax clearly visible on the skin with a very subtle and neutral scent. Applied in a thin layer, it effectively removes all hair from any body surface. Due to its high adhesion, hairs are quickly caught in the wax film, making epilation much faster and more efficient. It leaves the skin smooth and velvety, without that unpleasant sticky sensation after use. For healthy skin and successful epilation, we recommend using pre- and post-epilation products from the ItalWax range. ItalWax products are created from carefully selected ingredients and with a wide range of professional products that cover all professional epilation needs. These products can be used both in beauty salons and at home.

Features:

-Used with depilatory strips

-Disposable cartridge wax with a wide applicator

-Recommended for thin to medium and fine hair

-Ideal for any body area

-Suitable for all skin types

-Perfectly molds to the skin

-Very low melting temperature (37-39°C)

How to use:

-Wear disposable gloves.

-Heat the wax in the wax heater to a temperature of 37-39°C.

-It is recommended to apply in a thin layer

-The wax is ready for application when it reaches the consistency of melted honey.

-Apply the wax in a thin layer to the desired area using the built-in roller applicator.

-Apply a depilatory strip over the wax spread on the skin, leaving space to grasp.

-Wait a few seconds for the wax to harden.

-Hold and stretch the skin in the opposite direction of the pull.

-Remove the depilatory strip with a quick motion, parallel to the skin.

-Repeat the procedure if necessary.

For a complete procedure and healthy skin, we recommend using pre- and post-epilation products.

Weight: 100g

ItalWax Azulen Cartridge Wax 100ml

Azulen Cartridge Depilatory Wax is an extremely elastic, slightly transparent liposoluble wax, made from a mixture of synthetic and natural resins, recommended for hair removal on any part of the body and used with depilatory strips. It was specially created for fine hairs and sensitive skin. Due to its high adhesion, hairs are quickly caught in the wax film, making depilation much faster and more efficient. It is a hypoallergenic wax that does not cause irritation or allergies, being specially created for sensitive skin. It leaves the skin soft and smooth, without that unpleasant sticky feeling after use. The azulene in its composition hydrates dry skin and prevents irritation, being a powerful antibacterial, anti-inflammatory, and soothing agent. For healthy skin and successful depilation, we recommend using pre- and post-depilation products from the ItalWax range. ItalWax products are created from carefully selected ingredients and offer a wide range of professional products that cover all the needs of professional depilation. These products can be used both in beauty salons and at home.

Features:

-Used with depilatory strips

-Disposable cartridge wax with a wide applicator

-Recommended for fine to medium hair

-Ideal for any area of the body

-Suitable for sensitive skin

-Molds perfectly

-Very low melting temperature (37-39 °C).

How to use:

-Use disposable gloves.

-Heat the wax in a wax heater to a temperature of 37-39 °C.

-It is recommended to apply a thin layer

-The wax is ready for application when it reaches the consistency of melted honey.

-Apply a thin layer of wax to the desired area using the built-in roller applicator

-Apply a depilatory strip over the wax spread on the skin, leaving room to grip.

-Wait a few seconds for the wax to harden.

-Pre-tension and hold the skin in the opposite direction of removal.

-Remove the depilatory strip with a brisk motion, parallel to the skin.

-If necessary, repeat the procedure.

For a complete procedure and healthy skin, we recommend using pre- and post-depilation products.

Weight: 100g

ItalWax Cartridge Wax Raspberry Flex 100ml

The hair removal wax, a blend of natural and synthetic wax, in a Raspberry Flex 100 ml cartridge from ItalWax, is designed for hair removal from any body area and for any hair type. This type of wax with raspberry essential oil ensures perfect adherence to the hair and is used with waxing strips. It is a pink, slightly transparent wax, clearly visible on the skin with a very pleasant fruity scent. Applied in a thin layer, it effectively removes all hairs from any body surface. Due to its high adhesion, hairs are quickly caught in the wax film, making waxing much faster and more efficient. It leaves the skin smooth and soft, without that unpleasant sticky feeling after use. For healthy skin and successful hair removal, we recommend using ItalWax pre- and post-epilation products. ItalWax products are made from carefully selected ingredients and offer a wide range of professional products that cover all the needs of professional hair removal. These products can be used both in beauty salons and at home.

Features:

-Used with waxing strips

-Single-use cartridge wax with wide applicator

-Recommended for all hair types, from fine to thick

-Ideal for any body area

-Suitable for all skin types

-Conforms perfectly

-Very low melting point (37-39°C)

-Very pleasant raspberry scent

How to use:

-Use disposable gloves.

-Heat the wax in the wax heater to a temperature of 37-39°C.

-It is recommended to apply in a thin layer

-The wax is ready for application when it reaches the consistency of melted honey.

-Apply a thin layer of wax to the desired area using the built-in roller applicator.

-Apply the waxing strip to the wax spread on the skin, leaving space to grip.

-Wait a few seconds for the wax to harden.

-Stretch and hold the skin taut in the opposite direction of the pull.

-Remove the waxing strip with a quick motion, parallel to the skin.

-Repeat the procedure if necessary.

For a complete procedure and healthy skin, we recommend using pre- and post-epilation products.

Weight: 100g

ItalWax Nirvana Lavender Elastic Pearl Wax

This is an elastic wax that allows hair removal for any skin and hair type, on any body area, even in hard-to-reach areas. It perfectly conforms to the contours of the area to be epilated, allows each hair to be gripped very close to the skin, and provides easy and very efficient hair removal. It is recommended to apply a thin layer with a spatula. The film wax does not break during the hair removal procedure. Film wax is an improved version of classic hot wax. Thanks to the addition of specific and innovative elements, this wax has established and advantageous properties: it has a much lower melting temperature (40-45 ° C). Nirvana Lavender Elastic Wax removes all hairs without irritating the skin, reducing the sensation of pain. For healthy skin and successful hair removal, we recommend using pre- and post-epilation products from the ItalWax range. ItalWax products are made from carefully selected ingredients and with a wide range of professional products that cover all needs. These products can be used both in beauty salons and at home.

Features:

-Recommended for any skin and hair type

-Ideal for any body area

-Conforms perfectly

-Allows gripping of any hair

-Very low melting temperature (40-45 ° C).

How to use:

-Use disposable gloves.

-Pour the required amount of wax into the wax heater container.

-Heat the wax to a temperature of 40°- 45 ° C.

-For large areas, it is recommended to use a large spatula.

-Stir the wax occasionally to check its consistency; the wax is ready for application when it reaches the consistency of melted honey.

-Apply a thin layer of wax to the desired area with a spatula in the direction of hair growth.

-Using the edge of the spatula, form a grip area with the wax.

-Wait a few seconds for the wax to harden.

-Stretch and hold the skin taut in the opposite direction of removal.

-Remove the wax with sharp movements, parallel to the skin.

-If necessary, repeat the procedure.

For a complete procedure and healthy skin, we recommend using pre- and post-epilation products.

Italwax Top Line Crystal Pearl Elastic Wax is a pearl-white synthetic wax from the Top Line range, designed for sensitive skin. Italwax describes it as the gentlest in the range and highly recommends it for the face. It is used at 38°C and can be removed without strips.

What it does for you

• Epilate the face and allergy-prone skin with a wax free from pine resin and fragrance.
• Low temperature: 38°C, so it does not overheat delicate skin.
• Grips very short hairs, from 1 mm, and coarse hairs, says Italwax.
• Does not break when removed, even when spread over a large area, because it is highly elastic.
• Also suitable for legs and arms, not just small areas.

How to use it at home

1. Heat the wax in the wax heater to 38°C.
2. Degrease the skin with a pre-epilation foam or lotion and apply a little talcum powder.
3. Spread the wax with a spatula in any direction towards you, leaving a border to grip.
4. Press the spatula firmly and steadily.
5. When it no longer sticks to the touch, stretch the skin and remove it quickly, parallel to the skin.
6. Soothe the skin with an oil-free post-epilation product.

For which skin type and area

For sensitive and allergy-prone skin: the face, underarms, and bikini area, and with large strips for legs or arms. The Italwax catalogue recommends it for experienced users. If you are just starting out, Coral, also from Top Line, is easier to work with.

Active ingredients

• Synthetic base, free from pine resin: Italwax makes Top Line wax from synthetic polymers (hydrogenated polycyclopentadiene), without the pine resin that can irritate allergy-prone skin.

Specifications

What else you need

• Wax heater with 800 ml container
• Wooden wax spatulas
• Italwax Top Line pre-epilation foam with lime
• Italwax talcum powder for pre-epilation
• Italwax post-epilation lotion with azulene

ProBeauty tip. Close the zip-lock bag tightly after each use. Italwax chose it to keep dust out of the pearls, and a facial wax must stay clean.

ItalWax Post-Epilation Oil with Menthol

This is a post-epilation oil with cleansing, moisturizing, and soothing/cooling effects, enriched with peppermint essential oil. Menthol reduces painful reactions, diminishes inflammation, and lowers local temperature. The post-epilation oil completes the depilation process, improving the skin's appearance after waxing. The Post-Epilation Oil with Menthol helps remove wax residues and eliminates the sticky sensation that can occur after waxing.

Features:

-Cleanses the skin of sticky wax residues after the procedure

-Cooling/fresh effect

-Moisturizes

-Soothes

-Carefully selected ingredients

How to use: Apply to waxed skin and gently massage into the skin to cleanse the waxed skin of sticky wax residues and soothe irritated skin.

ItalWax Aquamarine Flex Cartridge Wax 100ml

Aquamarine Cartridge Depilatory Wax is a light blue, extremely elastic, medium-density liposoluble wax, made from an innovative blend of synthetic and natural resins, recommended for waxing large areas (legs, arms, back) with waxing strips. After the wax solidifies, it forms a thin film on the skin, capturing all hairs and ensuring a firm grip on the depilatory strip. Aquamarine wax does not leave the skin sticky. It removes 100% of the hair without breaking it. The selected ingredients restore the nutritional and protein balance of the skin, providing optimal hydration during the waxing process, whether in the salon or at home. For healthy skin and successful waxing, we recommend using pre- and post-waxing products from the ItalWax range. ItalWax products are created from carefully selected ingredients and offer a wide range of professional products that cover all professional waxing needs. These products can be used both in beauty salons and at home.

Features:

-Used with waxing strips

-Disposable cartridge wax with a wide applicator

-Recommended for all hair types

-Ideal for large body areas

-Molds perfectly

-Very low melting point (37-39 ° C).

How to use:

-Use disposable gloves.

-Heat the wax in the wax heater to a temperature of 37-39 ° C.

-It is recommended to apply in a thin layer

-The wax is ready for application when it reaches the consistency of melted honey.

-Apply a thin layer of wax to the desired area using the built-in roll-on applicator.

-Apply the depilatory strip to the wax spread on the skin, leaving room to grip.

-Wait a few seconds for the wax to solidify.

-Stretch and hold the skin taut in the opposite direction of removal.

-Remove the waxing strip with a sharp motion, parallel to the skin.

-If necessary, repeat the procedure.

For a complete procedure and healthy skin, we recommend using pre- and post-waxing products.

Weight: 100Gr

ItalWax Oil-Free Lotion with Azulene After Depilation

This oil-free azulene lotion perfectly cleanses the skin after depilation, hydrating and soothing irritated skin. It has all the advantages of an oily product: it easily removes wax residues after depilation, absorbs immediately, but does not create an oily effect on the skin. It contains Azulene, an organic compound frequently used in the cosmetic industry.
The Oil-Free Lotion with Azulene after depilation was created for post-depilation application to effectively remove wax residues left on the skin. It also works against the sticky sensation that might appear after depilation. Because it absorbs quickly into the skin and does not have an oily texture, it is preferred by beauty salon clients. For healthy skin and successful depilation, we recommend using pre- and post-depilation products from the ItalWax range. ItalWax products are created from carefully selected ingredients and with a wide range of professional products that cover all needs. These products can be used both in beauty salons and at home.

Features:

-Post-depilation product

-Oil-free

-Hydrates

-Soothes

-Effectively cleans wax residues left after the depilation procedure

-Contains Azulene

-Does not leave skin oily

-Dries very quickly

How to use: Spray directly onto the already depilated skin area, then gently massage to remove any remaining wax. No rinsing required.

Weight: 100ml

Italwax Film Wax Elastic Wax White Chocolate Pearls 500 g is the medium-sized bag of white and creamy wax from the classic Italwax line. It melts in the heater, has a vanilla aroma reminiscent of white chocolate, and pulls off without leaving bands. It is a good format if you epilate a few areas at home without buying a kilogram.

What it does for you

• It gives you time to correct. Italwax describes it as having a longer setting time, suitable for less experienced hands.
• It does not pull out hairs when you pull it off, although it is very plastic.
• It removes short and coarse hairs from the armpits, groin area, and face.
• Creamy consistency, which spreads easily even on larger surfaces.
• You dose it easily. The pearls melt as much as you need, and you keep the rest in the bag.

How to use it at home

1. Put only the pearls you need in the heater and melt them at around 42 °C.
2. Degrease the skin with a pre-epilation foam or lotion and lightly powder with talc.
3. Spread a thin layer, regardless of the direction of the hairs, towards you, and leave a small "petal" to hold at the end.
4. When the wax is no longer sticky to the touch, hold the skin taut and pull quickly, parallel to the skin.
5. If hairs remain, reapply the wax over them and press the spatula more firmly.
6. Finally, soothe the skin with an oil-free post-epilation lotion.

For what type of skin and area

For the face, armpits, and groin area, on normal skin. It is one of the Italwax waxes recommended for those who are just starting, because it sets more slowly. For sensitive or allergic skin, Italwax has the Top Line, synthetic-based line.

Specifications

What else you need

• Wax heater with 800 ml container
• Wooden wax spatulas
• Protective paper for the heater
• Italwax talc powder, small format
• Italwax post-epilation lotion with azulene

ProBeauty tip. Keep the bag well closed and melt only the pearls you need each time. The rest stays in the bag for next time.

Italwax Film Wax Elastic Wax Pink Pearls 500 g is the red wax from the classic line, in a medium-sized bag. It melts in the heater, is spread thinly, and is pulled off like a film, without strips. Because it hardens more slowly, it is suitable if you are a beginner.

What it does for you

• It gives you time. Italwax describes it as having a fairly long hardening time, so you can apply it carefully.
• Removes thick and short hairs from the underarms and the classic bikini area.
• You work without strips: the wax lifts on its own, like an elastic strip.
• Thin layer, clean hair removal: it does not leave broken hairs when applied correctly.
• Medium format, good for home hair removal.

How to use it at home

1. Put the wax pearls you need in the heater and melt them at around 42 °C.
2. Cleanse the skin with a pre-hair removal foam and lightly powder with talc.
3. Spread the wax towards you, in a thin layer, and form a grip edge at the end.
4. Press the spatula firmly over the entire strip.
5. Wait until it no longer sticks to the touch, stretch the skin and pull off in one motion, parallel to the skin.
6. Finish with an oil-free soothing lotion.

For what skin type and area

For normal skin: underarms, classic bikini area, and face. If your skin gets red easily or reacts, choose a Top Line wax, synthetic-based. If you already have a steady hand and want speed, azulena hardens faster.

Specifications

What else you need

• Wax heater with 800 ml container
• Wooden wax spatulas
• Italwax talc powder, small format
• Italwax Top Line pre-hair removal foam with lime
• Italwax after-hair removal lotion with azulena

ProBeauty tip. On the underarm, spread the wax in a single application, as Italwax recommends. This way you pass over the sensitive skin there only once and finish faster.

Italwax Top Line Orchid Elastic Wax Beads is a lilac synthetic wax with a delicate orchid fragrance, from the line for sensitive skin. When melted, it is transparent and has a gel consistency, so you can see the hairs through it. It is worked at 38 °C and is pulled off without bands.

What it does for you

• See every hair through the wax, because it is transparent when you spread it.
• Removes hair of any thickness and length, says Italwax.
• Gentle on thin skin: the manufacturer says it does not cause redness.
• Smells nice, like orchid, while you work.
• Sets matte, so you can easily see when it is ready to pull off.

How to use it at home

1. Heat the wax to 38 °C.
2. Degrease the area with a pre-epilation foam and apply a dusting of talc.
3. Spread the wax with a spatula, regardless of the direction of the hairs, towards you.
4. Look through the transparent layer: if you see uncovered hairs, press the spatula over them again.
5. When the wax becomes matte and no longer sticks, stretch the skin and pull it off quickly, parallel to it.
6. Finally, apply an after-epilation lotion.

For what skin type and area

The Italwax catalog recommends it for the underarms and bikini area, on sensitive or allergic skin. It is also used on the legs and arms. It is scented, so if your skin reacts to fragrances, choose a fragrance-free Top Line wax.

Active ingredients

• Synthetic base, without pine resin: Italwax makes Top Line wax from synthetic polymers (hydrogenated polycyclopentadiene), without the pine resin that can irritate allergic skin.

Specifications

What else you need

• Wax heater with 800 ml container
• Wooden wax spatulas
• Italwax Top Line pre-epilation foam with lime
• Italwax talc powder for before epilation
• Italwax after-epilation lotion with azulene

ProBeauty tip. Use the color change as a signal: as long as the wax is shiny, wait a little longer. When it becomes matte and no longer sticks to the touch, it is time to pull it off.

Italwax Film Wax Elastic Wax Natural Beads 500 g is a transparent wax from the classic line, in a medium-sized bag. It has a gentle formula, follows the contours of the body, and catches short hairs. You spread it with a spatula and pull it off without strips.

What it does for you

• Catches short hairs and on uneven surfaces, according to Italwax's description.
• Comfort on delicate areas, because it feels slightly warm during application.
• See the hairs through the wax, being transparent.
• Does not leave broken hairs when pulled off correctly, in a single layer.
• Suitable quantity for home hair removal, without having to keep a large bag open.

How to use it at home

1. Melt the beads you need in the wax heater, at around 42 °C.
2. Cleanse the area with a pre-hair removal foam, wipe it dry, and lightly powder with talc.
3. Apply a thin layer, towards you, and leave a small "petal" at the end to grip.
4. Press the spatula firmly, so that all the hairs enter the wax.
5. When it no longer sticks to the touch, stretch the skin and pull quickly, parallel to it.
6. Finally, apply an oil-free soothing lotion.

For what skin type and area

For the face, underarms, and bikini area, on normal skin, according to the Italwax catalog. Italwax says that it feels very slightly warm on the skin. For allergic or reactive skin, choose the Top Line range, which is synthetic-based.

Specifications

What else you need

• Wax heater with 800 ml container
• Wooden wax spatulas
• Italwax talc powder, small size
• Italwax Top Line pre-hair removal foam with lime
• Italwax after-hair removal lotion with azulene

ProBeauty tip. Work on the bikini area with small strips. You can hold onto short hairs more easily with the skin stretched when you pull them off.

ItalWax Cartridge Wax Rose Flex Oil 100ml

The hair removal wax, a blend of natural and synthetic wax in a 100ml Rose Flex Oil cartridge from ItalWax, enriched with rose oil, is designed for hair removal on any body area and for any hair type. This type of wax ensures perfect adhesion to the hair and is used with waxing strips. It is a light pink, non-transparent wax, clearly visible on the skin, with a very pleasant rose scent. Applied in a thin layer, it effectively removes all hairs from any body surface. Due to its high adhesion, hairs are quickly caught in the wax film, making waxing much faster and more efficient. It leaves the skin smooth and soft, without that unpleasant sticky feeling after use. For healthy skin and successful hair removal, we recommend using pre- and post-waxing products from the ItalWax range. ItalWax products are created from carefully selected ingredients and offer a wide range of professional products that cover all professional waxing needs. These products can be used both in beauty salons and at home.

Features:

-Used with waxing strips

-Disposable cartridge wax with wide applicator

-Recommended for all hair types, from fine to thick

-Ideal for any body area

-Suitable for all skin types

-Molds perfectly

-Very low melting temperature (37-39°C)

-Very pleasant and relaxing rose scent

How to use:

-Use disposable gloves.

-Heat the wax in the wax heater to a temperature of 37-39°C.

-It is recommended to apply in a thin layer

-The wax is ready for application when it reaches the consistency of melted honey.

-Apply the wax in a thin layer to the desired area using the built-in roller applicator.

-Apply the waxing strip onto the wax spread on the skin, leaving space to grip.

-Wait a few seconds for the wax to harden.

-Stretch and secure the skin in the opposite direction of the pull.

-Remove the waxing strip with a quick, abrupt movement, parallel to the skin.

-If necessary, repeat the procedure.

For a complete procedure and healthy skin, we recommend using pre- and post-waxing products.

Weight: 100g

Italwax Top Line Elastic Wax Pearls Coral is an orange, creamy synthetic wax from the line for sensitive skin. It has a very strong grip on thick hair and hair grown back after shaving, so it is easy to work with even if you are just learning. It is used at 38°C, without strips.

What it does for you

• Grips thick and shaved hair thanks to its very strong adhesion, says Italwax.
• Easy to use, even if you are a beginner, because it is creamy and easy to apply.
• Good for the bikini area, where the hair is thickest.
• Gentle on the face: the manufacturer says it does not leave redness even on thin, fair skin.
• No pine resin and no fragrance, for sensitive skin.

How to use it at home

1. Heat the wax to 38°C.
2. Degrease the skin with a pre-epilation foam and powder with a little talc.
3. Spread the wax with a spatula in any direction towards you, and form a "petal" at the end.
4. Press the spatula down firmly so that the thick hair is completely enveloped in the wax.
5. When the wax is no longer sticky, stretch the skin and pull off quickly, parallel to the skin.
6. Apply an after-wax lotion at the end.

For what skin type and area

For sensitive or allergy-prone skin: the bikini area, underarms, face, and legs or arms. Italwax also recommends it for beginners. If you want something even gentler for the face and have a steady hand, check out Cristal.

Active ingredients

• Synthetic base, without pine resin: Italwax makes Top Line wax from synthetic polymers (hydrogenated polycyclopentadiene), without the pine resin that can irritate allergy-prone skin.

Specifications

What else you need

• Wax heater with 800 ml container
• Wooden wax spatulas
• Italwax Top Line Formula pre-epilation foam with lemon
• Italwax talc powder for before epilation
• Italwax after-wax lotion with azulene

ProBeauty tip. If you have shaved, wait a few days before epilating. Coral grips short hair grown back after shaving well, but it must protrude slightly from the skin for the wax to catch it.

ItalWax Coconut Cartridge Wax 100ml

ItalWax 100ml Coconut Oil Soluble Depilatory Wax is specially designed to remove medium to thick and short hair. This type of wax ensures perfect adhesion to the hair and is used with depilatory strips. It is an opaque wax, clearly visible on the skin, with a very pleasant coconut scent. Applied in a thin layer, it effectively removes all hairs from any body surface. Due to its high adhesiveness, hairs are quickly trapped in the wax film, making depilation much faster and more efficient. It leaves the skin soft and smooth, without that unpleasant sticky sensation after use. For healthy skin and successful depilation, we recommend using pre- and post-depilation products from the ItalWax range. ItalWax products are made from carefully selected ingredients and offer a wide range of professional products that cover all needs for professional depilation. These products can be used both in beauty salons and at home.

Features:

-Used with depilatory strips

-Disposable cartridge wax with wide applicator

-Recommended for thin to medium and fine hair

-Ideal for any body area

-Suitable for all skin types

-Molds perfectly

-Very low melting temperature (37-39 ° C)

-Very pleasant coconut scent

How to use:

-Use disposable gloves.

-Heat the wax in the wax heater to a temperature of 37-39 ° C.

-It is recommended to apply in a thin layer

-The wax is ready for application when it reaches the consistency of melted honey.

-Apply the wax in a thin layer to the desired area using the built-in roller applicator

-Apply the depilatory strip over the wax spread on the skin, leaving space to grip.

-Wait a few seconds for the wax to harden.

-Tension and hold the skin in the opposite direction of the pull.

-Remove the depilatory strip with a quick movement, parallel to the skin.

-If necessary, repeat the procedure.

For a complete procedure and healthy skin, we recommend using pre- and post-depilation products.

Weight: 100Gr

ItalWax Vin Flex Cartridge Wax 100ml

ItalWax Vin Flex 100ml cartridge hair removal wax, a blend of natural and synthetic waxes, is designed for hair removal from any body area and for all hair types. This type of wax ensures perfect adhesion to the hair and is used with depilatory strips. It is a light purple, slightly transparent wax, clearly visible on the skin, with a very pleasant scent. Applied in a thin layer, it effectively removes all hairs from any body surface. Due to its high adhesiveness, hairs are quickly trapped in the wax film, making epilation much faster and more efficient. It leaves the skin smooth and soft, without that unpleasant sticky sensation after use. For healthy skin and successful epilation, we recommend using ItalWax pre- and post-epilation products. ItalWax products are created from carefully selected ingredients and offer a wide range of professional products that cover all professional epilation needs. These products can be used in beauty salons as well as at home.

Features:

-Used with epilatory strips

-Disposable cartridge wax with wide applicator

-Recommended for all hair types, from fine to coarse

-Ideal for any body area

-Suitable for all skin types

-Conforms perfectly

-Very low melting temperature (37-39°C)

-Very pleasant and relaxing scent

How to use:

-Use disposable gloves.

-Heat the wax in the wax heater to a temperature of 37-39°C.

-It is recommended to apply in a thin layer

-The wax is ready for application when it reaches the consistency of melted honey.

-Apply the wax in a thin layer to the desired area using the built-in roller applicator

-Apply the depilatory strip to the wax spread on the skin, leaving space to grip.

-Wait a few seconds for the wax to harden.

-Stretch and hold the skin in the opposite direction of the pull.

-Remove the epilatory strip with a quick motion, parallel to the skin.

-Repeat the procedure if necessary.

For a complete procedure and healthy skin, we recommend using pre- and post-epilation products.

Weight: 100g

ItalWax Rose Cartridge Wax 100ml

ItalWax Rose 100ml Liposoluble Cartridge Wax is specially formulated to remove medium to thick and short hair. This type of wax ensures perfect adhesion to the hair and is used with depilatory strips. It is a non-transparent wax, clearly visible on the skin, with a very pleasant rose scent. Applied in a thin layer, it efficiently removes all hairs from any area of the body. Due to its high adhesiveness, hairs are quickly caught in the wax film, making depilation much faster and more efficient. It leaves the skin smooth and soft, without that unpleasant sticky sensation after use. For healthy skin and successful depilation, we recommend using pre- and post-epilation products from the ItalWax range. ItalWax products are made from carefully selected ingredients and offer a wide range of professional products that cover all professional depilation needs. These products can be used both in beauty salons and at home.

Features:

-Used with depilatory strips

-Disposable cartridge wax with wide applicator

-Recommended for medium and short hair

-Ideal for any body area

-Suitable for all skin types, including sensitive

-Molds perfectly

-Very low melting temperature (37-39 ° C)

-Very pleasant rose scent

How to use:

-Use disposable gloves.

-Heat the wax in the wax warmer to a temperature of 37-39 ° C.

-It is recommended to apply in a thin layer

-The wax is ready for application when it reaches the consistency of melted honey.

-Apply the wax in a thin layer to the desired area using the built-in roller applicator.

-Apply the depilatory strip over the wax spread on the skin, leaving space to grip.

-Wait a few seconds for the wax to harden.

-Stretch and hold the skin taut in the opposite direction of removal.

-Remove the depilatory strip with a sudden movement, parallel to the skin.

-Repeat the procedure if necessary.

For a complete procedure and healthy skin, we recommend using pre- and post-epilation products.

Weight: 100g

ItalWax Algae Flex Cartridge Wax 100ml

ItalWax Algae Flex Cartridge Wax is a highly adhesive wax, ideal for epilating larger areas such as the back, arms, and legs, and is used with waxing strips. It has high plasticity, allowing for efficient and quick hair removal. It contains natural and synthetic resins, a balanced blend enriched with innovative ingredients. After solidifying, it forms a thin film on the skin, capturing all hair and ensuring a firm grip on the waxing strip. It does not leave the skin sticky. It removes 100% of hair without breaking it. It is recommended for all hair types. The addition of algae restores the skin's nutritional and protein balance, providing optimal hydration during the hair removal process, whether at the salon or at home. For healthy skin and successful hair removal, we recommend using ItalWax pre- and post-epilation products. ItalWax products are made from carefully selected ingredients and offer a wide range of professional products that cover all needs. These products can be used both in beauty salons and at home.

Features:

-Used with waxing strips

-Disposable cartridge wax

-Recommended for all hair types

-Ideal for the back, legs, and arms

-Molds perfectly

-Very low melting temperature (40 °C).

How to use:

-Use disposable gloves.

-Heat the wax in the wax heater to a temperature of 40 °C.

-It is recommended to apply a thin layer.

-The wax is ready for application when it reaches the consistency of melted honey.

-Apply a thin layer of wax to the desired area using the built-in roller applicator.

-Apply the waxing strip to the wax spread on the skin, leaving room to grip.

-Wait a few seconds for the wax to set.

-Stretch and hold the skin in the opposite direction of removal.

-Remove the waxing strip with a quick motion, parallel to the skin.

-If necessary, repeat the procedure.

For a complete procedure and healthy skin, we recommend using pre- and post-epilation products.

Weight: 100Gr

Italwax Pre-Epilation Lotion with Aloe Vera 250 ml prepares the skin for waxing. It removes cosmetic residue, degreases the skin, and lifts the hairs. It contains a small amount of alcohol and plant extracts, including aloe vera.

What it does for you

• The skin remains clean and grease-free before you apply the wax.
• The hairs are lifted, so the wax grips them more easily.
• Removes cream and makeup residue from the area you want to wax.
• Does not dry out the skin: Italwax says it degreases without a drying effect.
• Economical for large areas: legs, arms, back.

How to use it at home

1. Apply the amount of lotion you need to the area to be waxed.
2. Spread it with light, massaging motions.
3. Wipe off the excess with a tissue and let the skin dry.
4. Apply a little talc powder if you are working with hot wax or sugar paste.
5. Continue with the wax.

For what skin type and area

For large areas: legs, arms, back. Italwax recommends it primarily before hot wax, but the catalog also lists it for hard wax pearls and sugar paste. For the underarms, groin, or sensitive skin, Top Line foam with lime is the option designed for delicate areas.

Active ingredients

• Aloe vera: plant extract that helps care for the skin before hair removal.
• Alcohol, in a small amount: degreases the skin before waxing.

Specifications

What else you need

• Italwax Hot Wax Cartridge, Aloe Vera
• Italwax Hot Wax with Honey, 400 ml Tin
• Italwax Cosmetic Talc Powder
• Italwax After-Wax Oil with Lemon
• Hair Removal Strip Roll

ProBeauty Tip. Do not apply body cream on the day of hair removal. Skin without cream helps the lotion do its job.

Italwax Glowax Elastic Wax Beads Cherry Pink 400 g is a pink wax with shimmering particles from the Solo line, for facial hair removal at home. It is made with synthetic resins, without natural pine resins, can be applied in any direction, and can be removed without strips. The packaging says "Made in Italy".

What it does for you

• Remove facial hair at home: upper lip, chin, eyebrows, sideburns, and underarms.
• Removes even short hairs, of any thickness, according to Italwax.
• Leaves no sticky residue and does not irritate the skin, according to the manufacturer.
• Suitable for sensitive skin, as it contains no pine resins.
• Compact 400 g pouch, easy to use at home, according to Italwax.

How to use it at home

1. Melt the wax and mix it until it reaches a honey-like consistency, around 38 °C.
2. For the first use, apply a small amount of wax to the back of your hand; if there is no reaction after 24 hours, you can use it.
3. Cleanse the area of makeup with a pre-epilation gel and apply a thin layer of talc. Tie your hair back.
4. Spread a small amount of wax with a spatula, ensuring it is the same thickness in the center and at the edges.
5. When it is no longer sticky, stretch the skin and pull off firmly, parallel to the skin.
6. Finally, apply an after-epilation emulsion or lotion.

For what skin type and area

For the face and small areas, such as the underarms, including sensitive skin. The Glowax kit instructions do not recommend it for elderly people, diabetics, or those treated with oral retinoids. If you take medications that affect your skin, ask your doctor first.

Specifications

What else you need

• Wax heater with 800 ml container
• Wooden wax spatulas
• Italwax talc powder, small size
• Italwax after-epilation lotion with azulene

ProBeauty tip. Leave at least 72 hours between two epilations, as recommended by Italwax. A slight redness after epilation is normal and usually subsides within a few hours.

Discover a new era of hair removal with ITALWAX TOP LINE EMERALD, a premium synthetic polymer wax, meticulously crafted to deliver unparalleled results. This innovative formula combines cutting-edge technology with the finest ingredients to ensure a smooth and efficient hair removal process. Say goodbye to stubborn hairs, as this wax effortlessly adheres even to the shortest pre-shaved hairs on your arms and legs, leaving your skin irresistibly smooth and hair-free.
Gentle Care for Sensitive Skin Formulated with the utmost care for sensitive skin, this wax is a testament to Italwax's commitment to providing skincare solutions for everyone. Created without natural resins, it offers a soothing and comfortable hair removal experience, without causing irritation or discomfort.
Comfort and Convenience: Its semi-transparent formula ensures precise application, allowing for effortless removal of unwanted hair. Say goodbye to unpleasant odors, as this fragrance-free wax transforms your hair removal routine into a luxurious and pleasant experience. With the ability to be easily removed using suitable strips, ITALWAX TOP LINE EMERALD redefines convenience, making hair removal a seamless part of your beauty regimen.
Features:
-Used with waxing strips
-Disposable wax cartridge with a wide applicator
-Recommended for sensitive skin
-Ideal for arms and legs
-Perfectly molds
-Very low melting point (37-39 ° C)
-Very pleasant and relaxing scent
How to use:
-Use disposable gloves.
-Heat the wax in the wax heater to a temperature of 37-39 ° C.
-It is recommended to apply in a thin layer
-The wax is ready for application when it reaches the consistency of melted honey.
-Apply a thin layer of wax to the desired area using the built-in roller applicator
-Apply the depilatory strip to the wax spread on the skin, leaving space for gripping.
-Wait a few seconds for the wax to harden.
-Pre-tension and hold the skin in the opposite direction of the tear.
-Remove the waxing strip with a sharp motion, parallel to the skin.
-If necessary, repeat the procedure.
For a complete procedure and healthy skin, we recommend using pre- and post-waxing products.

Italwax Natural Classic Hot Wax in a 400 ml Honey Jar is a transparent, liposoluble wax made with natural beeswax. It is designed for fine, light-colored hairs. The 400 ml jar is the smallest size in the range, ideal if you wax infrequently.

What it offers

• Removes fine, light-colored hairs, exactly the type of hair Italwax recommends for honey wax.
• Adheres well to the hair: the brand states that all its classic waxes adhere well to hair.
• You use only a little, as it is applied in a thin layer.
• You don’t buy more than you need: the 400 ml jar is the smallest size in the range, ideal for getting started.
• You work with natural resin: the base of the classic waxes is pine resin with plant-based additives.

How to use it at home

1. Open the jar, place it in a wax warmer, and let it melt, stirring occasionally.
2. When it is viscous but no longer runny, test it on the inside of your wrist.
3. Prepare the skin: apply lotion or foam before waxing, then a little talc.
4. Take a small amount of wax with a spatula and wipe off the excess to prevent dripping.
5. Apply a thin layer in the direction of hair growth over an area the size of the strip.
6. Apply the strip, leaving one end free, press it down, and pull it off quickly in the opposite direction of hair growth, parallel to the skin.
7. Finish by applying an oil or lotion after waxing to remove any wax residue.

Suitable skin types and areas

For the legs, arms, and back, and for fine, light-colored hairs at least 3 mm long. For thick, short hairs, a thicker wax from the same range will adhere more securely. Avoid using it on skin with acute or chronic conditions or over varicose veins.

Active ingredients

• Natural beeswax: the ingredient that gives the honey wax its distinctive character.
• Pine resin: the natural base of the classic hot waxes, with plant-based additives.

Specifications

What else you need

• Wax warmer with an 800 ml container
• Wooden wax spatulas
• Paper roll for waxing strips
• Italwax talc for waxing, 90 g
• Italwax after-waxing lotion with orange

ProBeauty tip. If you wax every few weeks, the small jar is the more practical choice. Only put the lid back on after the wax has cooled to prevent dust from settling between sessions.

Italwax Wax Equipment Cleaner 500 ml is the brand's spray for wax and paraffin residue. Use it on the heater, spatulas, and work surface, not on the skin. You'll find it on the bottle as "Wax Equipment Cleaner".

What it does for you

• The heater stays clean: Italwax made it to remove wax left on heaters and hair removal tools.
• It also works on paraffin: the brand recommends it for wax and paraffin residue.
• Spatulas and beauty beds are easy to clean, as are other surfaces where wax has dripped.
• Apply quickly: the bottle has a spray nozzle, so you can reach the edges.
• Keep it by the heater: a 500 ml bottle, ready to use after every hair removal treatment.

How to use it at home

1. At the end, unplug the heater. Italwax requires the device to be disconnected after use.
2. Spray as much as needed on wax or paraffin residue on the heater, spatula, bed, or table.
3. Wipe away the residue with a wipe, as recommended by Italwax.
4. Pay special attention to the edge of the heater and the lid. Italwax says that wax left there makes the lid difficult to remove next time.
5. Do not scrape off hardened wax with sharp objects: Italwax heater instructions forbid this.

For what type of work

For those who frequently perform hot wax or hard wax pearl hair removal, or apply paraffin wraps, and have their own heater. It is a product for equipment and tools, not for the skin. Remove wax residue from the skin with an oil or lotion after hair removal.

Specifications

What else you need

• 800 ml wax heater
• Wooden wax spatulas
• Protective paper for wax heater
• Disposable towels
• Italwax after-hair removal oil with lemon
• Italwax peach paraffin

ProBeauty tip. Clean the heater after every hair removal treatment, even when the wax layer is thin. An old layer, built up over weeks, is much harder to remove than today's drips.

Italwax Film Wax Elastic Wax Beads Plum 500 g is a purple, creamy wax from the classic range, with a light fruity scent, in a medium-sized bag. The thick texture coats the hair from the root, and the wax pulls off without leaving strips.

What it does for you

• Catches the shortest hairs, because the dense wax coats them from the root, says Italwax.
• Forgiving for beginners: it hardens more slowly than the fast waxes in the range.
• Does not leave sticky hairs when pulled.
• Pleasant fruity scent during hair removal.
• Practical size for home use, so you don't have to keep a large bag open.

How to use it at home

1. Melt only what you need in the wax heater, at around 42 °C.
2. Cleanse the skin with a pre-epilation foam and powder with a little talc.
3. Apply a thin layer, towards you, and form a gripping edge.
4. Press the spatula firmly over the entire surface.
5. When it no longer sticks to the touch, stretch the skin and pull quickly, parallel to the skin.
6. Finish with an oil-free soothing lotion.

For what skin type and area

For the underarms, bikini area, and face, according to Italwax, including on thin skin. It is from the classic range, with natural resins; if you know that you have wax allergies, choose Top Line. For the legs and back, Full Body wax is more practical.

Specifications

What else you need

• Wax heater with 800 ml container
• Wooden wax spatulas
• Italwax talc powder, small size
• Italwax Top Line pre-epilation foam with lime
• Italwax after-epilation lotion with azulene

ProBeauty tip. Stir the wax in the heater occasionally, so that it melts evenly. Before the first strip, check the temperature on the inside of your wrist.

ItalWax Banana Cartridge Wax 100ml

ItalWax Banana Cartridge Depilatory Wax 100 ml is specifically designed to remove medium and coarse hair. This type of wax contains titanium dioxide to ensure optimal adherence to the hair. It is a non-transparent wax, clearly visible on the skin. Applied in a thin layer, it effectively removes all hairs from large areas: arms, legs, back. Due to its high adhesiveness, the hairs are quickly trapped in the wax film, making epilation much faster and more efficient. It leaves the skin soft and smooth, without that unpleasant sticky feeling after use. For healthy skin and successful epilation, we recommend using pre- and post-epilation products from the ItalWax range. ItalWax products are created from carefully selected ingredients and with a wide range of professional products that cover all needs of professional depilation. These products can be used both in beauty salons and at home.

Features:

-Used with depilation strips

-Disposable cartridge wax with a wide applicator

-Recommended for medium and coarse hair

-Ideal for any body area

-Suitable for all skin types

-Molds perfectly

-Very low melting temperature (37-39 ° C).

How to use:

-Use disposable gloves.

-Heat the wax in the wax heater to a temperature of 37-39 ° C.

-It is recommended to use in a thin layer

-The wax is ready for application when it reaches the consistency of melted honey.

-Apply the wax in a thin layer on the desired area using the built-in roller applicator.

-Apply the depilatory strip to the wax spread on the skin, leaving space to grip.

-Wait a few seconds for the wax to harden.

-Stretch and hold the skin in the opposite direction of removal.

-Remove the depilation strip with a quick movement, parallel to the skin.

-If necessary, repeat the procedure.

For a complete procedure and healthy skin, we recommend using pre- and post-epilation products.

Weight: 100g

Italwax Film Wax Elastic Wax with azulene pearls 500 g is the same transparent wax with azulene from the classic line, in a smaller bag. It is fast: it sets quickly, so it is for those who already have a practiced hand. You pull it off without strips, like a film.

What it does for you

• Fast hair removal on small areas. The wax sets quickly and you easily move from one strip to another.
• Catches short and thick hairs from the armpits and groin area.
• Thin layer, because the texture is fluid.
• Does not stick to the skin, but to the hair, according to Italwax's description.
• Azulene extract in the formula, which Italwax gives a soothing effect.

How to use it at home

1. Melt in the heater only what you need, at around 42 °C.
2. Cleanse the area with a pre-epilation foam and apply a little talc.
3. Spread a thin layer, towards you, on a small section, and leave a grip edge.
4. Press the spatula firmly, so the hairs enter the wax.
5. When the wax is no longer sticky, stretch the skin and pull quickly, parallel to it.
6. At the end, apply an oil-free soothing lotion.

For what type of skin and area

For the armpits and groin area, and for the face, on normal skin. It is not the first wax we recommend if you are just starting: it sets quickly. For sensitive skin, Italwax has the Top Line range.

Active ingredients

• Azulene extract: according to Italwax, it has a soothing effect on the skin.

Specifications

What else you need

• Wax heater with 800 ml container
• Wooden wax spatulas
• Italwax talc powder, small format
• Italwax Top Line pre-epilation foam with lime
• Italwax after-epilation lotion with azulene

ProBeauty's tip. On the armpit try to work in a single application, as Italwax recommends. If after pulling there are remaining hairs, reapply the wax only there and press the spatula more firmly.

Italwax Top Line Emerald Elastic Wax Beads is an emerald green, semi-transparent, glittery synthetic wax from the line for sensitive skin. Italwax describes it as the most elastic in the Top Line range: it spreads very thinly and is designed for the legs and arms. It is used at 38°C, without strips.

What it does for you

• Easily covers the legs and arms, as it spreads in large strips without breaking.
• You use less: being very elastic, it works in very thin layers.
• Removes short and coarse hairs from the root, without sticking to the skin, says Italwax.
• For sensitive skin: it is synthetic, fragrance-free, and pine resin-free.
• Also suitable for the underarms and bikini area, not just for large areas.

How to use it at home

1. Heat the wax to 38°C.
2. Degrease the skin with a pre-epilation foam and apply a little talc.
3. Spread the wax very thinly with a spatula, in any direction, in long strips.
4. Leave a small "petal" at the end to hold onto.
5. When it no longer sticks to the touch, stretch the skin and pull off quickly, parallel to it.
6. Finally, moisturize the skin with a post-epilation product.

For what skin type and area

For sensitive or allergic skin, preferably on large areas: legs, arms. Italwax also recommends it for the underarms and bikini area. For the face, Top Line has more suitable variants, such as Cristal or Pink Pearl.

Active ingredients

• Synthetic base, without pine resin: Italwax makes Top Line wax from synthetic polymers (hydrogenated polycyclopentadiene), without the pine resin that can irritate allergic skin.

Specifications

What else you need

• Wax heater with 800 ml container
• Wooden wax spatulas
• Italwax Top Line pre-epilation foam with lime
• Italwax talc powder for before epilation
• Italwax post-epilation lotion with azulene

ProBeauty tip. On the calf, work in long and thin strips: spread the wax towards you, then hold the skin taut with the other hand and pull off in the opposite direction, parallel to the skin.

Italwax Strong Sugar Paste 600 g is a medium-density paste for sugar waxing. Italwax created it for warm rooms and areas where the skin is warm and damp. You work it by hand.

What it does for you

• Made for heat: Italwax created it for warm rooms and the summer season.
• Works on warm and damp areas of the body, which is what the brand designed it for.
• Short recipe: only sugar, water, and cornstarch, without citric acid.
• Does not melt or run: the paste is plastic and soft, but keeps its shape during use.
• Residues come off with water, because the paste is water-soluble.

How to use it at home

1. Cleanse the skin with a pre-waxing lotion. If the skin is damp, apply a little talc.
2. Take a piece of paste and spread it against the direction of hair growth, using gentle movements.
3. Smooth the skin well with the other hand.
4. Pull the paste off in one quick motion, in the direction of hair growth, parallel to the skin.
5. Immediately touch the area with the free palm: Italwax says this dissipates the sensation of pain.
6. Do not pass over the same area more than 3 times.

For what type of skin and area

Italwax says it is suitable for any area, but it really shows its worth on warm and damp areas and in warm rooms during the summer. The brand warns that sugar waxing requires skill, so start with a small area. Do not use it on skin with lesions or growths. Italwax lists diabetes mellitus as a contraindication for sugar waxing.

Active ingredients

• Sugar and water: the "nothing extra" base of the paste's recipe.
• Cornstarch: a natural absorbent that keeps the skin surface dry.

Specifications

What else you need

• Italwax cosmetic talc powder
• Italwax Help Line antiperspirant powder
• Nitrile gloves, size M
• Italwax Soft Sugar Paste 600 g
• Italwax Ultra Soft Sugar Paste 600 g

ProBeauty's tip. If the paste seems too hard or too soft to you, mix it with another Italwax paste. The brand actually recommends this, depending on the warmth of the hands, the skin, and the room.

ItalWax Top Line Coral Cartridge Wax 100ml

ItalWax premium quality Top Line Coral 100 ml synthetic polymer roll-on wax (SP Wax) is designed for hair removal from delicate areas (bikini, face, armpits). The wax does not contain natural resin and therefore does not cause allergies, making it suitable for sensitive skin. This type of wax ensures perfect adherence to the hair and is used with waxing strips. It is transparent but clearly visible on the skin with a very pleasant, relaxing scent. Applied in a thin layer, it efficiently removes all hairs from any body surface. Due to its high adhesiveness, hairs are quickly trapped in the wax film, making epilation much faster and more efficient. It leaves the skin smooth and soft, without that unpleasant sticky sensation after use. For healthy skin and successful epilation, we recommend using pre- and post-epilation products from the ItalWax range. ItalWax products are created from carefully selected ingredients and feature a wide range of professional products that cover all professional epilation needs. These products can be used both in beauty salons and at home.

Features:

-Used with waxing strips

-Single-use roll-on wax with wide applicator

-Recommended for medium and short hair

-Ideal for delicate areas (bikini, face, armpits)

-Suitable for all skin types, including sensitive

-Molds perfectly

-Very low melting temperature (37-39 ° C)

-Very pleasant and relaxing scent

How to use:

-Use disposable gloves.

-Heat the wax in the wax heater to a temperature of 37-39 ° C.

-It is recommended to use a thin layer

-The wax is ready for application when it reaches the consistency of melted honey.

-Apply a thin layer of wax to the desired area using the built-in roll-on applicator

-Apply the waxing strip to the waxed skin, leaving room to grip.

-Wait a few seconds for the wax to set.

-Stretch and hold the skin taut in the opposite direction of removal.

-Remove the waxing strip with a quick motion, parallel to the skin.

-Repeat the procedure if necessary.

For a complete procedure and healthy skin, we recommend using pre- and post-epilation products.

Weight: 100Gr

ItalWax Aloe Vera Wax Can 800ml

This is a synthetic wax that allows for easy and efficient removal of fine hair, on any body surface, even in hard-to-reach areas, and is used with waxing strips. It perfectly molds to the contour of the area to be waxed, allows each hair to be gripped very close to the skin, and provides easy and very efficient waxing. It is recommended to apply a thin layer with a spatula, over which the waxing strip is then applied. Aloe Vera wax in a can is an improved version of classic hot wax. Thanks to the addition of specific and innovative elements, this wax has established and advantageous properties: it has a much lower melting temperature (37-39 ° C). Aloe Vera wax removes all fine hairs without irritating the skin, reducing the sensation of pain. For healthy skin and successful waxing, we recommend using pre- and post-waxing products from the ItalWax range. ItalWax products are created from carefully selected ingredients and offer a wide range of professional products that cover all needs. These products can be used in beauty salons as well as at home.

Features:

- Used with waxing strips

- Recommended for fine hair

- Ideal for any body surface

- Molds perfectly

- Allows gripping of any hair type and strand

- Very low melting temperature (37-39 ° C).

How to use:

- Use disposable gloves.

- Heat the wax to a temperature of 37°- 39 ° C.

- The use of a metal spatula is recommended.

- Stir the wax occasionally to check its consistency; the wax is ready for application when it reaches the consistency of melted honey.

- Apply a thin layer of wax to the desired area with a spatula in the direction of hair growth.

- Apply the waxing strip over the wax spread on the skin, leaving a grip area.

- Wait a few seconds for the wax to harden.

- Stretch and hold the skin taut in the opposite direction of removal.

- Remove the waxing strip with a quick motion, parallel to the skin.

- If necessary, repeat the procedure.

For a complete procedure and healthy skin, we recommend using pre- and post-waxing products.

Weight: 800g

Italwax Nirvana Sandalwood Elastic Wax Beads is a synthetic wax with sandalwood oil from the oil-based SPA hair removal line. When heated, it has a warm, pronounced aroma. It is free from allergenic components, so it is suitable for sensitive skin and can be removed without strips. Italwax has since renamed the Vanira line, but ours says Nirvana on the bag.

What it does for you

• Turns hair removal into a ritual. The sandalwood aroma can be smelled from the heater.
• The skin is protected by oil during hair removal, as the wax is applied over pre-waxing oil.
• Removes short hairs, including those grown back after shaving.
• Suitable for sensitive skin, with a synthetic base, says Italwax.
• You can apply it in any direction and remove it without strips.

How to use it at home

1. Heat the wax to 38 °C.
2. Degrease the skin with an alcohol-based lotion.
3. Massage a little pre-waxing oil into the skin and blot off the excess with a tissue.
4. Spread the wax quickly, regardless of the direction of hair growth, and form a "petal" at the end.
5. Leave it for a few seconds to harden, then, with the skin taut, pull it off parallel to the skin.
6. Finish with an after-wax care product.

For what skin type and area

For sensitive skin: underarms and bikini area, plus legs, arms, and back. It is used on oil, not talc. It is not for the face; use Selfie there. If you do not like strong scents, Full Body or a fragrance-free Top Line wax are more discreet.

Active ingredients

• Sandalwood oil: gives the wax its aroma and is part of the formula designed for oil-based SPA hair removal.

Specifications

What else you need

• Italwax Nirvana Lavender Pre-Waxing Oil
• Wax heater with 800 ml container
• Wooden wax spatulas
• Italwax talc powder for pre-waxing
• Italwax Lemon After-Waxing Oil

ProBeauty tip. If this is your first time using oil-based hair removal, start with the 100 g bag on one underarm. You will soon realize how much oil to leave on the skin so that the wax adheres properly.

Italwax Pour Homme Barber Edition Elastic Wax Beads for the face is a synthetic wax that Italwax created for men's faces and beard contours. It is metallic petrol blue, fragrance-free, and catches the thick and coarse hairs on the face. It pulls off without bands.

What it does for you

• Precise beard contour. Italwax is for the beard, mustache, eyebrows, sideburns, and the clear hairline.
• Catches the thick and coarse hairs on men's faces, thanks to its increased adhesion.
• Spreads in a thin film and removes short hairs with minimal discomfort, says the manufacturer.
• Fragrance-free, based on synthetic polymers.
• You work at 38–40 °C, a low temperature, suitable for the face and neck.

How to use it at home

1. Heat the wax in the heater to 38–40 °C.
2. Cleanse the area with a pre-epilation lotion and apply a little talc.
3. Take a little wax with a narrow spatula and apply it regardless of the direction of the hairs, pressing firmly.
4. Bring the end of the strip towards the area with fewer hairs and lift it gently, so you can catch it.
5. Check if the wax has hardened, secure the skin and pull quickly, in the opposite direction of application.
6. Move on to the next section, then soothe the skin with a post-epilation product.

For what skin type and area

For men's face and neck: beard contour, mustache, eyebrows, sideburns, and neck. Italwax calls it a hypoallergenic synthetic wax. It is not designed for the chest or back: there you use Pour Homme for the body or Full Body.

Specifications

What else you need

• Wax heater with an 800 ml container
• Wooden wax spatulas
• Italwax talc powder, small format
• Italwax post-epilation lotion with azulene
• Italwax post-epilation oil with menthol

ProBeauty tip. Draw the beard contour first by looking in the mirror, on both sides, before the first strip. A line pulled too high cannot be corrected until the hair grows back.

ItalWax Zinc Oxide Cartridge Wax 100ml

This liposoluble wax has an exclusively synthetic composition, without natural resins, therefore, it does not cause allergic reactions on sensitive skin. It is recommended for hair removal from large areas (arms, back, legs). Zinc Oxide wax is a high-quality product, with high density, specially created for removing short, medium-thick, coarse hairs. It is a non-transparent wax, clearly visible on the skin with a very pleasant and relaxing scent. Applied in a thin layer, it effectively removes all hairs from any body surface. Due to its high adhesiveness, hairs are quickly caught in the wax film, making epilation much faster and more efficient. It leaves the skin soft and velvety, without that unpleasant sticky sensation after use. For healthy skin and successful epilation, we recommend using pre- and post-epilation products from the ItalWax range. ItalWax products are created from carefully selected ingredients and with a wide range of professional products that cover all the needs of professional epilation. These products can be used both in beauty salons and at home.

Features:

-Used with epilation strips

-Disposable cartridge wax with a wide applicator

-Recommended for medium and short hair

-Ideal for any body area

-Suitable for all skin types, including sensitive

-Molds perfectly

-Very low melting temperature (37-39 ° C)

-Very pleasant and relaxing scent

How to use:

-Use disposable gloves.

-Heat the wax in the wax heater to a temperature of 37-39 ° C.

-It is recommended to apply in a thin layer

-The wax is ready for application when it reaches the consistency of melted honey.

-Apply the wax in a thin layer on the desired area using the built-in roller applicator.

-Apply the depilatory strip to the wax spread on the skin, leaving a grip area.

-Wait a few seconds for the wax to harden.

-Tension and hold the skin in the opposite direction of tearing.

-Remove the epilatory strip with a sharp, parallel movement to the skin.

-If necessary, repeat the procedure.

For a complete procedure and healthy skin, we recommend using pre- and post-epilation products.

Weight: 100Gr

ItalWax Top Line Pearl Cartridge Wax 100ml

The premium quality synthetic liposoluble depilatory wax in a Top Line Pearl 100 ml cartridge from ItalWax (SP Wax) is designed for hair removal from any body area and for any hair type. The wax does not contain natural resin and therefore does not cause allergies. This type of wax ensures perfect adherence to the hair and is used with depilatory strips. It is a non-transparent white wax, clearly visible on the skin, with a very pleasant, relaxing scent. Applied in a thin layer, it efficiently removes all hair from any body surface. Due to its high adhesiveness, hairs are quickly trapped in the wax film, making epilation much faster and more efficient. It leaves the skin smooth and soft, without that unpleasant sticky sensation after use. For healthy skin and successful epilation, we recommend using pre- and post-epilation products from the ItalWax range. ItalWax products are created from carefully selected ingredients and offer a wide range of professional products that cover all needs for professional epilation. These products can be used in beauty salons as well as at home.

Features:

-Used with depilatory strips

-Disposable cartridge wax with wide applicator

-Recommended for all hair types, from fine to thick

-Ideal for any body area

-Suitable for all skin types, including sensitive

-Molds perfectly

-Very low melting temperature (37-39°C)

-Very pleasant and relaxing scent

How to use:

-Use disposable gloves.

-Heat the wax in the wax heater to a temperature of 37-39°C.

-It is recommended to apply in a thin layer

-The wax is ready for application when it reaches the consistency of melted honey.

-Apply the wax in a thin layer to the desired area using the built-in roller applicator

-Apply the depilatory strip to the wax spread on the skin, leaving space for gripping.

-Wait a few seconds for the wax to harden.

-Pre-stretch and fix the skin in the opposite direction of removal.

-Remove the depilatory strip with a brisk movement, parallel to the skin.

-If necessary, repeat the procedure.

For a complete procedure and healthy skin, we recommend using pre- and post-epilation products.

Weight: 100Gr

ItalWax Lemon Cartridge Wax 100ml

ItalWax 100 ml Lemon Liposoluble Depilatory Cartridge Wax is specially formulated to remove medium to thick and coarse hair. This type of wax ensures perfect adherence to the hair and is used with depilatory strips. It is an opaque wax, clearly visible on the skin, with a very pleasant citrus scent. Applied in a thin layer, it effectively removes all hairs from any body surface. Due to its high adhesiveness, hairs are quickly trapped in the wax film, making depilation much faster and more efficient. It leaves the skin smooth and soft, without that unpleasant sticky sensation after use. For healthy skin and successful depilation, we recommend using pre- and post-waxing products from the ItalWax range. ItalWax products are made from carefully selected ingredients and offer a wide range of professional products that cover all professional depilation needs. These products can be used both in beauty salons and at home.

Features:

-Used with depilatory strips

-Disposable cartridge wax with wide applicator

-Recommended for medium to thick and coarse hair

-Ideal for any area of the body

-Suitable for all skin types

-Molds perfectly

-Very low melting temperature (37-39 ° C)

-Pleasant lemon scent

How to use:

-Use disposable gloves.

-Heat the wax in the wax heater to a temperature of 37-39 ° C.

-It is recommended to apply a thin layer

-The wax is ready to apply when it reaches the consistency of melted honey.

-Apply a thin layer of wax to the desired area using the built-in roller applicator

-Apply the depilatory strip to the wax spread on the skin, leaving space to grip.

-Wait a few seconds for the wax to harden.

-Stretch and hold the skin taut in the opposite direction of removal.

-Remove the depilatory strip with a brisk motion, parallel to the skin.

-If necessary, repeat the procedure.

For a complete procedure and healthy skin, we recommend using pre- and post-epilation products.

Weight: 100Gr