Wax heaters

The ETB Wax 100 ml Mono Wax Heater is a small device for a single 100 ml wax cartridge. It has its own applicator, so you heat the wax and apply it with the same device. It is suitable for hair removal at home, but also for salon use.

What it does for you

• The wax is ready in approximately 20 minutes, liquid and ready to apply.
• You heat and apply it with the same device, because it comes with its own applicator.
• It stands stably on the table, in the support that holds it in a vertical position.
• It takes up very little space: it has a small base and can be stored anywhere.
• You can take it with you on trips, because of its small size.

How to use it at home

1. Insert a 100 ml wax cartridge into the device.
2. Connect the cable to the outlet and place the device in the support, vertically.
3. Let the wax heat for approximately 20 minutes, until it becomes liquid.
4. Roll the wax on the skin in the direction of hair growth and remove it with hair removal strips.
5. At the end, unplug the device and let it cool down in the support.

For what type of work

It is the simple choice if you remove hair at home with a single roll-on wax. It works with 100 ml cartridges, such as ETB Wax pink, yellow, green, and blue waxes. If you want to change the wax often between areas, a Duo or Trio set will save you from changing cartridges. It is not for pearl wax, which melts in a container.

Specifications

What else you need

• 100 ml pink roll-on wax
• 100 ml yellow roll-on wax
• 100 ml green roll-on wax
• 90 m hair removal roll
• Post-hair removal cleansing oil with aloe vera

ProBeauty tip. Before the first pass, roll the applicator on a hair removal strip. See if the wax flows evenly before you put it on the skin and don't burn the first portion on the area to be removed.

The ETB Wax ProWarm Trio Set 3 x 100 ml wax heater consists of a heating base and three wax applicators. Keep three different waxes warm at the same time and switch between them without interruption. It comes with the power cable included, ready to use.

What it does for you

• Work with three waxes at once, for example, one for legs and one for delicate areas.
• The wax stays evenly warm, because the base distributes the heat evenly.
• Don't stop halfway through hair removal: when one applicator is empty, you have another warm one ready.
• The workspace stays tidy, with all the applicators on the same stable base.
• Use it from day one: the set comes complete, with a power cable.

How to use it at home

1. Place the base on a flat, stable surface and connect the cable to a power outlet.
2. Fill the applicators with the wax you want to use and place them on the base.
3. Let the wax heat up. You can find the heating time in the wax instructions.
4. Take an applicator, spread the wax in the direction of hair growth, and remove it with hair removal strips.
5. Between areas, place the applicator back on the base so the wax stays warm.

For what type of work

ProWarm Trio is designed for a busy salon, but it also works at home if you remove hair often or use different waxes on different areas. If you work with a single wax, the Duo set or the mono heater will be enough for you. For pearl elastic wax, you need a heater with a container, such as the ETB Wax Pro Advance.

Specifications

What else you need

• Pink roll-on wax 100 ml
• Yellow roll-on wax 100 ml
• Blue roll-on wax 100 ml
• Hair removal roll 90 m
• Post-hair removal cleansing oil with aloe vera

ProBeauty tip. Stick a piece of tape with the wax name on each applicator. When working with three colors, you will no longer have to guess which wax is for the face and which is for the legs.

The ETB Wax ProWarm Duo Set 2 x 100 ml wax heater has a heating base and two wax applicators. It keeps the wax at a constant temperature throughout the hair removal process. It comes ready to use, with the power cable included.

What it does for you

• Two waxes ready at the same time, for example, one for the body and one for delicate areas.
• The wax stays constantly warm, because the heating is even and stable.
• Work without interruptions, switching from one applicator to the other.
• Clean and modern design, which looks good even on a home table.
• Works both at home and in the salon, as recommended by ETB Wax.

How to use it at home

1. Place the base on a flat and stable surface and connect the cable to the socket.
2. Fill the applicators with the chosen wax and place them on the base.
3. Wait for the wax to heat up, following the instructions on its packaging.
4. Apply the wax in the direction of hair growth and remove it with hair removal strips.
5. Place the applicator back on the base between areas and unplug the device at the end.

For what type of work

For home hair removal if you use two waxes, and for small salons with daily work. If you want to keep three waxes warm, choose ProWarm Trio. If you remove hair infrequently and with a single wax, the mono heater is more practical. The set is not designed for heated pearl wax in a container.

Specifications

What else you need

• Pink roll-on wax 100 ml
• Green roll-on wax 100 ml
• Hair removal roll 90 m
• Post-hair removal gel with camphor and menthol
• Talc powder for hair removal

ProBeauty tip. Turn on the set before preparing your skin. While you shower, dry off, and apply the powder, the wax heats up, so you don't have to wait by the device.

The ETB Wax Pro Advance 800 ml wax heater is a device for melting hot hair removal wax. It has a power output of 100 W and an analog thermostat, and the box includes a lid and power cable. ETB designed it for professional salon use, but it is just as easy to use at home.

What it does for you

• The wax heats up quickly, with a power output of 100 W.
• You control the temperature with the analog thermostat, so the wax is neither too hard nor too hot.
• It lasts a long time, according to ETB: the heating element is shielded and made for constant use.
• The wax stays clean between sessions, because it comes with a lid.
• It holds a lot of wax at once: the capacity is 800 ml.

How to use it at home

1. Place the heater on a stable surface and put the protective paper around the edge, if you use it.
2. Put the wax in the container and cover it with the lid.
3. Connect the cable and set the temperature on the thermostat.
4. Wait until the wax becomes liquid and creamy, then stir it with a spatula.
5. Test the temperature on a small area of skin before each new area.
6. After hair removal, turn off the device and put the lid back on.

What it is for

For hot hair removal wax that melts in a container and is spread with a spatula, such as pearl and coin wax. It is not a heater for roll-on cartridges. For those, ETB Wax has the Mono, ProWarm Duo, and ProWarm Trio heaters.

Specifications

What else you need

• ETB Wax pink pearl elastic wax 1 kg
• ETB Wax purple jasmine vegan synthetic wax 800 g
• Protective paper for 800 ml wax heater
• ETB Wax wooden spatulas
• ETB Wax post-hair removal oil with aloe vera

ProBeauty tip. Turn on the heater before you get ready: while you shower and dry your skin, the wax has time to melt. Stir it before each strip so that it has the same temperature throughout.