Moser

The Moser Primat Mini Corded Trimmer 1411-0052 is Moser's small trimmer in titanium, with an oscillating motor for continuous use. It has a STAR BLADE stainless steel blade, made in Germany, which cuts at 0.3 mm, and weighs approximately 190 g.

What it does for you

• Close-to-skin contouring: the 32 mm blade cuts at 0.3 mm.
• Work without breaks: the polarized oscillating motor is made for continuous use.
• Runs quietly and smoothly, so it is pleasant for the client too.
• Never leaves you halfway: it is corded, without a battery to charge.
• Durable blade, made of precision-sharpened stainless steel.

How to use it at home

1. Put a drop of oil on the blade and run the machine for a few seconds.
2. For contouring, hold the blade perpendicular to the skin and work with short strokes.
3. For a short beard, attach the comb.
4. Keep the cable behind the hand, so it does not get tangled near the ear.
5. After use, unplug the machine, clean the blade with the brush, and oil it.

For what type of work

For contours, necklines, sideburns, mustaches, and finishing, in the barbershop or at home. It is suitable if you want a simple, corded machine that never runs out of power. For cutting the whole head, you need a hair clipper with a wide blade.

Specifications

What else you need

• Wahl oil for blades
• Wahl Blade Ice spray for cooling the blades
• Wahl neck strip
• Wahl cutting cape

ProBeauty tip. Machines with an oscillating motor heat up slightly after prolonged use. Oil the blade between clients: the oil reduces friction and keeps the blade cooler on the client's skin.

The Moser 1400 Mini Corded Trimmer 1411-0050 is the compact version of the classic Moser 1400, designed for outlining and finishing. It features a STAR BLADE stainless steel blade made in Germany, an oscillating motor for continuous use, and weighs approximately 190 g. It is burgundy.

What it does for you

• Close-to-skin outlining: the 32 mm blade cuts at 0.3 mm.
• Continuous use, with a polarized oscillating motor running at approximately 3000 rpm.
• Quiet and powerful, with the new motor from the 1400 Mini range.
• Always ready to use: it is corded and does not require a battery.
• Small and lightweight, making it easy to maneuver around the ears and neck.

How to use it at home

1. Apply a drop of oil to the blade and run the trimmer for a few seconds.
2. For the hairline and sideburns, hold the blade perpendicular to the skin.
3. For a short beard, attach the comb.
4. Work in short strokes without applying pressure.
5. When finished, unplug the trimmer, clean the blade with the brush, and oil it.

What it is best suited for

For outlining, the neck, sideburns, mustache, and finishing, whether at the barbershop or at home. It pairs well with a Moser 1400 hair clipper for detailing. To cut all the hair on your head, you need a hair clipper with a wide blade.

Specifications

What else you need

• Wahl blade oil
• Wahl Blade Ice spray for cooling the blades
• Wahl neck strip
• Wahl striped barber cape

ProBeauty tip. For a straight hairline, first draw the line lightly with the corner of the blade, like a pencil. Only then clear the area beneath it using the full width of the blade.

Attention! The product may have an opened or damaged packaging and may show minor signs of use or small scratches that do not affect its functionality!

🐾 Maximum performance for professional grooming

Moser Max 45 is a professional corded animal clipper designed for full body clipping of dogs and cats, as well as partial clipping of horses and cattle. Thanks to its robust construction, precise cutting, and high reliability, it is the ideal choice for professional groomers and demanding owners.

Equipped with a powerful 45 W DC motor, the clipper offers two speed settings (2400 and 3000 rotations/minute), easily adapting to different coat types and work requirements. It is perfect for intensive and continuous use without overheating.

The professional, all-metal SnapOn blade set, "Made in Germany", is precisely ground, has a cutting length of 1 mm and coarse-pitch teeth, ensuring a uniform, clean, and aesthetic clip.

🌟 Key Benefits:
• Powerful 45 W DC motor for intensive professional use
• 2 speed levels: 2400 / 3000 rpm
• All-metal SnapOn blade set, made in Germany
• 1 mm cutting length for precise results
• Quick-change blade set system – easy to clean and maintain
• Stainless steel teeth – resistant and durable
• Ergonomic design, with a secure and comfortable grip
• Removable air filter for simple maintenance

🎯 Recommended for:
• Full body clipping of dogs and cats
• Partial clipping of horses and cattle
• Professional grooming salons
• Continuous and long-term use

✨ Moser Max 45 is a reliable animal clipper that delivers precise cutting, excellent control, and consistent professional results – day in, day out, no matter the challenge.

The Moser Genio Plus Removable Battery 1854-7988 is the spare battery Moser provides for the Genio Plus clipper. The Genio Plus comes with two interchangeable batteries: one is in use while the other charges on the charging stand. With an extra battery or a replacement for a worn-out one, your clipper is always ready to work.

What it does for you

• Shave without charging breaks: remove the empty battery and insert a fully charged one in a few seconds.
• Real runtime: Moser provides approximately 100 minutes of shaving time on a full charge.
• Fast charging: approximately 75 minutes to a full charge on the clipper's charging stand.
• Original NiMH battery: the manual requires only the original battery, which features thermal protection.

How to use it at home

1. For the first use, charge the battery for 1.5 hours, as required by the Genio Plus manual.
2. Press the release buttons on the side and remove the old battery from the clipper.
3. Place the battery on the charging stand; the red LED lights up and flashes when charging is complete.
4. Push the charged battery into the clipper until you hear it click into place.
5. Recharge only when the indicator light on the clipper turns on; at that point, you have about 15% battery life remaining.

For which type of device

For the Moser Genio Plus clipper and, according to the Moser parts list, the Moser Arco 1854-0081 pet clipper. It is not for the standard Genio, model 1565, which has an internal battery.

Specifications

What else you need

• Moser Genio Plus Motor 1854-7060
• Moser Support and Guide 1854-7833
• Blade oil
• Blade cooling and cleaning spray

ProBeauty tip. Always leave the second battery on the charging stand. This way, you'll have a fully charged one ready when the battery in the clipper runs out, and both will wear evenly.

The Moser Li+Pro Mini Cordless Trimmer 1584-0050 is Moser's small trimmer that can be used corded or cordless. It features a German-made stainless steel STAR BLADE II blade that cuts at 0.4 mm and weighs approximately 120 g.

What it does for you

• Trimming very close to the skin: the STAR BLADE II blade cuts at 0.4 mm over a width of 32 mm.
• Work corded or cordless: the lithium-ion battery lasts up to 75 minutes.
• Charges quickly, in approximately 45 minutes, with no memory effect.
• Constant power: the chip-controlled motor maintains the same cutting power.
• Easy-to-remove blade, for cleaning and quick replacement with optional Carving or Designer blades.
• Lightweight and quiet, with a one-piece housing.

How to use it at home

1. Charge the trimmer on the stand. The LED in the button shows the charging status.
2. Put a drop of oil on the blade and run the trimmer for a few seconds.
3. For trimming, hold the blade perpendicular to the skin and work in short strokes.
4. For a short beard, attach the adjustable 3–6 mm comb.
5. After use, clean the blade with the brush and re-oil it.

For what type of work

For trimming contours, the neck, sideburns, mustache, and short beards, at the barbershop or at home. It is small and lightweight, so it easily reaches around the ears. For cutting the whole head, you need a hair clipper with a wide blade and longer combs.

Specifications

What else you need

• Wahl blade oil
• Wahl Blade Ice spray for cooling the blades
• Wahl neck strap
• Moser Li+Pro Mini 1584-7050 replacement motor

ProBeauty tip. When the battery life starts to visibly decrease, don't blame the battery: the Moser manual states that a dirty blade and a clogged housing opening shorten the operating time. Clean them and check again.

The Moser Primat 1230 Blade Support and 1230-7472 adjustment segment is a replacement part for the blade area of the Moser Primat corded hair clipper. Primat is a Moser model, and the 1230 codes are its parts in the official parts list. Moser does not publish a data sheet for code 1230-7472, so you order it when the code on the old part or the service center tells you exactly this code.

What it does for you

• The blade is securely fixed again: a broken or worn blade support makes the blade loose.
• Straight cutting line: with the blade properly seated, the cut is uniform.
• Order by code: compare 1230-7472 with the code on the old part before installation.
• You don't replace the whole machine: Primat is designed for continuous work and is worth repairing.

How to use it at home

1. Unplug the machine and open the blade.
2. Take a photo of how the old part is positioned and compare its code and shape with the new part.
3. Mount the new support in the same position, then put the blade back in place.
4. Check the cutting length adjustment in all positions, lubricate the blade and turn on the machine as a test.
5. If you have never opened a machine before, leave the installation to an authorized service center.

For what type of device

For the Moser Primat 1230 corded hair clipper. For Primat 2in1 or other models we have no confirmation; check the type on the machine's label.

What else you need

• Guide for Moser Primat 1230-7720 blade
• Moser Primat 1230-7035 pivot set
• Moser Primat 1230-7730 balancer
• Moser Primat 1230-7590 upper housing
• Blade oil
• Cooling and cleaning spray for blades

ProBeauty's tip. When you replace a part in the blade area, also check the blade. If it is worn or has broken teeth, replace it then too; otherwise, the new part will wear out quickly.

The Moser Primat 1230 1230-7035 lever pivot set is the set of pivots listed in the official Moser parts list for the Primat 1230 hair clipper. The pivots hold the mechanism lever in place. Replace them when the lever has play, squeaks, or the clipper starts cutting unevenly.

What it does for you

• The mechanism runs tightly again: new pivots remove the play in the lever.
• The clipper runs quietly: Moser describes the Primat as very quiet, and loose parts make noise.
• Part by Moser code: 1230-7035 is listed in the parts list for the Primat 1230 model.
• Inexpensive repair: you replace a few small pivots, not the whole clipper.

How to use it at home

1. Unplug the clipper and open the blade and housing.
2. Take a photo of the lever and pivots before removing anything.
3. Replace the old pivots with the new ones in the same position.
4. Close the clipper, oil the blade, and run a short test.
5. If you have never worked on the mechanism of a clipper, leave the assembly to an authorized service center.

For what type of device

For the Moser Primat 1230 corded hair clipper, as listed in the Moser parts list. We have no confirmation for the Primat 2in1 or other models.

Specifications

What else you need

• Moser Primat 1230-7730 balancer
• Moser Primat 1230-7472 blade support
• Moser Primat 1230-7720 blade guide
• Moser Primat 1230-7071 switch
• Blade oil
• Blade cooling and cleaning spray

ProBeauty tip. If you are taking apart the mechanism anyway, also check the balancer and the guide. The parts around the lever wear out together; replace them all at once and you won't have to take the clipper apart again anytime soon.

The carving blade is made in Germany from the highest quality stainless steel. It offers a cutting length of 0.4 mm, with the blade width being 6.5 mm. The set features a quick-release stainless steel blade set and powerful cutting due to the precise grinding technology used. The 0.4 mm Wahl/Moser carving blade is lightweight, providing precise lines, contours, and designs for bold hairstyles and smooth, precise details for beard trimming. The blade set is compatible with Moser ChroMini and ChroMini Pro trimmers. The package contains: 1 blade + screws

Moser Primat 1230 Switch 1230-7071 is the on/off button for the Moser Primat corded hair clipper. The official Moser parts list specifies it for the Primat 1230 and for the 1170 and 1400 clippers. Replace it when the clipper no longer starts reliably or turns off on its own from the button.

What it does for you

• The clipper starts right away: a new switch no longer has loose contacts.
• You work without interruptions: sudden shutdowns in the middle of cutting disappear.
• One part for three models: the same code is listed for the Primat 1230, the 1170, and the 1400.
• A minor repair, not a new clipper: the rest of the clipper remains the one you know.

How to use it at home

1. First, check the cable and the socket: a clipper that doesn't start doesn't always have a faulty switch.
2. Unplug the clipper and open the housing, with the blade removed.
3. Note down or photograph how the wires are connected to the old switch.
4. Mount the new switch in exactly the same position and close the housing.
5. If you haven't worked with electrical parts before, leave the installation to an authorized service center.

For what type of device

For the Moser Primat 1230 corded clipper and, according to the Moser parts list, for the Moser 1170 and 1400 clippers. It is not a part for cordless clippers. For another model, check the code on the clipper's label before ordering.

Specifications

What else you need

• Moser Primat 1230 Upper Housing 1230-7590
• Moser Primat 2in1 Lower Housing 1234-7000
• Moser Primat 1230 Blade Guide 1230-7720
• Moser Primat 1230 Balancer 1230-7730
• Blade Oil
• Blade Cooling and Cleaning Spray

ProBeauty Tip. Moser manuals state that electrical repairs should only be carried out by specialists using original parts. The switch involves live wires, so a service center is the safe choice.

The Moser Primat 1230 Balancer 1230-7730 is a moving part of the motor in the Moser Primat hair clipper. After Moser, the Primat has a polarized oscillating armature motor, approximately 3000 rpm. The balancer is the part that oscillates and moves the blade. You replace it when it is worn, cracked, or when the clipper starts to vibrate irregularly.

What it does for you

• The clipper runs quietly again: Moser describes the Primat as very quiet, and a worn balancer ruins exactly that.
• The blade receives the correct movement: the cut becomes clean again, without pulling.
• Part by Moser code: 1230-7730 is listed as a balancer in the Primat 1230 parts list.
• Don't buy another clipper: the Primat is designed for continuous work and can be repaired part by part.

How to use it at home

1. Unplug the clipper and open the blade and housing.
2. Take a photo of the position of the balancer and the springs before you disassemble anything.
3. Mount the new balancer in exactly the same position.
4. Close the clipper, oil the blade, and run a short test.
5. If the clipper buzzes loudly or overheats, stop and take it to an authorized service center.

For what type of device

For the Moser Primat 1230 corded hair clipper, as listed in the Moser parts list. It is a mechanism part, not a replacement accessory between clippers. For the Primat 2in1 or other models, we do not have confirmation from Moser.

Specifications

What else you need

• Guide for Moser Primat 1230-7720 blade
• Moser Primat 1230-7590 upper housing
• Moser Primat 1230-7071 switch
• Moser Primat 1230-7035 pivot set
• Blade oil
• Cooling and cleaning spray for blades

ProBeauty advice. If the clipper has started to buzz louder, check the blade first. A dirty or un-oiled blade strains the motor and resembles a worn part.

Moser Primat 2in1 Lower Housing 1234-7000 is the bottom part of the housing for the Moser Primat 2in1 corded hair clipper. The code 1234 is the Primat 2in1 type, according to the Moser data sheet and manual. Replace it when the lower housing is cracked or broken at the clips.

What it does for you

• The clipper stays securely in your hand: an intact housing no longer wobbles and has no sharp edges.
• The interior stays clean: hair and dust enter the motor through cracks.
• You don't have to replace the whole clipper: Moser describes the Primat 2in1 as a clipper for continuous professional use.
• Part for your clipper type: the 1234 prefix of the code is the same as your clipper type.

How to use it at home

1. Unplug the clipper and remove the blade.
2. Unscrew the screws and note which parts are in the lower housing.
3. Use the brush to clean the hair collected inside.
4. Move the parts into the new housing in the same position, and close the clipper without forcing the screws.
5. Put the blade back, lubricate it, and turn on the clipper for a test.

For what type of device

For the Moser Primat 2in1 corded hair clipper, type 1234, which comes with a standard blade and a fine one for outlining. Moser does not publish a parts list for this model, so check the type on the clipper label. We have no confirmation for the Primat 1230 or other models.

What else you need

• Moser Primat 1230-7590 Upper Housing
• Moser Primat 1230-7071 Switch
• Moser Primat 1230-7720 Blade Guide
• Moser Primat 1230-7730 Balancer
• Blade oil
• Blade cooling and cleaning spray

ProBeauty Tip. When replacing the housing, also clean the cable contacts at the entry. A cable properly secured in the housing does not break at the bends.

The Moser Class 50 12 V DC 1250-7070 motor is the replacement motor for the Moser Class 50 corded hair clipper. Moser's official parts list includes it for the Class/Max 50 model, type 1250, and the Class 50 manual specifies a 12 V DC motor. Replace it when the old motor no longer starts, overheats, or loses power.

What it does for you

• Your clipper cuts with power again: a new motor restores the power Moser describes for the Class 50.
• Keep the clipper you know: the Class 50 is made, according to Moser, for continuous professional use.
• The correct part number: 1250-7070 is the motor listed in the model's parts list.
• Repair instead of a new device: the housing, cable, and blade remain the same, provided they are in good condition.

How to use it at home

1. First, check the cable, power supply, and outlet: the Class 50 manual lists them as the primary cause when the clipper does not work.
2. Clean and lubricate the blade; a stuck blade strains the motor.
3. If it still does not work, take the clipper and new motor to an authorized service center.
4. After installation, oil the blade and run the clipper for a few minutes as a test.

For what type of device

For the Moser Class 50 corded hair clipper, type 1250, the one with the 49 mm Star Blade. Moser's list groups it with the Max 50 under the same type. It is not the motor for other Moser models, such as the Class 45, which lists a different motor.

Specifications

What else you need

• Blade oil
• Cooling and cleaning spray for blades
• Hair clipper cape

ProBeauty's tip. Motors fail more often when the blade is dull or unsharpened. Along with the motor, check the blade. If it pulls clean and lubricated hair without tugging, replace it too.

Moser 1400 Complete Housing 1403-7010 is a replacement housing for the Moser 1400 series corded hair clipper. 1403 is the code Moser uses for the 1400 clipper parts in the official parts list. Replace it when the old housing is broken, cracked, or broken at the mounting points.

What it does for you

• The clipper is securely held again: no cracks and no edges that scratch you.
• The mechanism stays enclosed: hair and dust no longer enter through cracks to the coil.
• You don't replace the whole clipper: the blade, coil, and cable remain, if they are in good condition.
• And the switch is available: the Moser list gives the same switch for the 1400 as for the Primat, 1230-7071.

How to use it at home

1. Unplug the clipper and remove the blade.
2. Take a photo of the inside before moving the parts: coil, vibrator, springs, cable.
3. Move the parts into the new housing, in the same position.
4. Close the housing, mount the blade and lubricate it.
5. Turn the clipper on briefly; if it makes a loud noise, adjust the blade as shown in the manual or take it to a service center.

For what type of device

For the Moser 1400 corded hair clipper. The Moser manual covers types 1170, 1400, and 1411 together, but the parts list gives different housings for the 1400 and the 1400 Mini. Therefore, check the type on the clipper label before ordering.

What else you need

• Moser Primat Switch 1230-7071
• Blade oil
• Cooling and cleaning spray for blades
• Hair clipper cape

ProBeauty Tip. On the 1400 clippers, loud noise after assembly usually comes from the blade or its adjustment. The Moser manual explains the adjustment step by step; follow it before you think the part is to blame.

The Moser Genio Battery with Circuit 1565-7880 is the battery and electronic board assembly for the Moser Genio hair clipper. The Genio can be used corded or cordless, and the battery provides its cordless runtime. Replace it when the clipper no longer holds a charge or fails to charge at all.

What it does for you

• Cut hair cordlessly again: without a good battery, the Genio remains tethered to the wall outlet.
• One-piece battery and circuit: the service center replaces the entire assembly rather than searching for separate parts.
• Keep your lightweight clipper: Moser describes the Genio as extra-lightweight, making it worth repairing.
• Still works corded: until it is installed, you can continue working with the power supply plugged in.

How to use it at home

1. First, check the clipper's power supply and charging port; dirt on the contacts can also prevent charging.
2. Take the clipper and part to a service center; Moser requires that batteries be replaced only there.
3. After installation, fully charge the clipper before its first use.
4. Clean and lubricate the blade after each use to prevent unnecessary strain on the motor.

For which type of device

For the Moser Genio hair clipper, model 1565, the one with the Magic Blade. It is not for the Genio Plus, which has a different battery listed by Moser, 1854-7988. Code 1565-7880 does not appear in the parts list published by Moser, so check the model on the clipper's label before ordering.

What else you need

• Blade oil
• Blade cooling and cleaning spray
• Hair clipper cape

ProBeauty tip. Store the clipper at room temperature. Moser manuals state that it should not be exposed to extreme cold or high heat for extended periods. Do not leave it in the car during summer or near a heater.

The Moser Li+Pro Mini Motor 1584-7050 is the replacement motor for the Moser Li+Pro Mini trimmer, type 1584. The code prefix, 1584, is the type for the Li+Pro Mini, Moser's corded or cordless trimmer. Replace it when the trimmer no longer starts, runs intermittently, or sounds much louder.

What it does for you

• Clean outlines again: a trimmer needs a motor that pulls consistently.
• Keep the trimmer you know: Moser describes it as very lightweight and quiet, good for fine work.
• Part for the trimmer type: the 1584 code prefix is the type for the Li+Pro Mini.
• Repair, not a new device: the blade, battery, and stand remain, if they are in good condition.

How to use it at home

1. Fully charge the trimmer and clean the blade; a stuck blade can mimic a faulty motor.
2. If it still doesn't work, take the trimmer and motor to an authorized service center.
3. After installation, put a drop of oil on the blade and run the trimmer for a few minutes.
4. Work with short breaks when cutting long hair, so the blade does not overheat.

For what type of device

For the Moser Li+Pro Mini trimmer, type 1584, with a Star Blade II blade. For the Li+Pro² Mini, Moser's list gives a different motor code. The code 1584-7050 does not appear in the list published by Moser, so check the type on the trimmer's label before ordering.

What else you need

• Blade oil
• Blade cooling and cleaning spray
• Haircutting cape

ProBeauty tip. The Moser manual says that a dirty and unlubricated blade significantly shortens the working time. The same blade also strains your motor. Lubricate it after every trim.

The Moser ChroMini Battery 1590-7290 is the replacement battery for the Moser ChroMini cordless trimmer. The ChroMini runs only on battery power, so a worn-out battery will cause it to stop working. Replace it when the trimmer holds its charge for less and less time or no longer charges.

What it does for you

• The trimmer works again: The ChroMini runs only on battery power, without a cable.
• Unrushed contouring: no more working with your eyes glued to the little light at the bottom of your beard.
• You keep the small and lightweight trimmer: Moser describes it as very light and quiet.
• Simple repair in the service center: only the battery is replaced, the rest of the trimmer remains.

How to use it at home

1. First, check the stand and charging contacts; clean them of hair with a dry brush.
2. Take the trimmer and battery to a service center; Moser requires that batteries only be replaced there.
3. After installation, fully charge the trimmer on its stand before the first contouring.
4. Clean and lubricate the blade after each use, so the battery lasts as long as possible.

For what type of device

For the Moser ChroMini cordless trimmer (1591-0052 and 1591-0057). The ChroMini Pro has a different battery in Moser's list and a different charging stand. Code 1590-7290 does not appear in the list published by Moser, so check the model on the trimmer's label before ordering.

What else you need

• Moser ChroMini Designer Blade 1590-7350
• Blade oil
• Cooling and cleaning spray for blades

ProBeauty tip. If the trimmer doesn't last long even though the battery is new, check the blade. Moser manuals state that if blade maintenance is neglected, the operating time can decrease significantly.

The Moser Genio Plus Motor 1854-7060 is the replacement motor for the Moser Genio Plus hair clipper, the one with the removable battery. The official Moser parts list refers to it in the Genio Plus as the "2.6 V 1854 motor". Replace it when the clipper no longer starts with a charged battery or loses power while cutting.

What it does for you

• Cut with power again: The Genio Plus has, according to Moser, a noise-dampened DC motor with approximately 5000 rpm.
• Keep the two-battery system: the clipper comes with two batteries and continues to work with them.
• Part with the correct code: 1854-7060 is the motor in the Genio Plus parts list.
• Repair, not a new device: the Magic Blade blade, batteries, and charging station remain.

How to use it at home

1. First, try the other charged battery; sometimes the battery is worn out, not the motor.
2. Clean and lubricate the blade; a stuck blade strains the motor.
3. If the clipper still does not work, take it with the new motor to an authorized service center.
4. After installation, oil the blade and run the clipper for a few minutes as a test.

For what type of device

For the Moser Genio Plus hair clipper, type 1854, with a removable battery and 46 mm Magic Blade blade. It is not the motor for the Arco pet clipper, which has a different code in the Moser parts list, nor for the standard Genio, type 1565.

Specifications

What else you need

• Moser Genio Plus Battery 1854-7988
• Moser 1854-7833 Holder and Guide
• Blade oil
• Blade cooling and cleaning spray

ProBeauty Tip. Use the batteries one after the other, not just one. The Genio Plus manual is designed around this idea: one works, the other charges. The motor always receives a good voltage.

The Moser Genio Plus Support and Guide 1854-7833 is a replacement part for the Moser Genio Plus hair clipper. The code 1854 is the Genio Plus clipper type. Moser does not publish a data sheet for this part, so order it when the service center or the code on the old part tells you exactly 1854-7833.

What it does for you

• The clipper is back to work: you only replace the broken or worn part, by its code.
• Order by code, not by picture: compare 1854-7833 directly with the code on the old part.
• Part for the clipper type: the prefix 1854 is the Genio Plus type.
• Minor repair: you don't replace the whole clipper for a small part.

How to use it at home

1. Remove the battery and then the blade, sliding it off the housing.
2. Compare the code and shape of the old part with the new part before installation.
3. If you have never disassembled a clipper, leave the installation to an authorized service center.
4. After installation, snap the blade back into place until it clicks, lubricate it, and turn on the clipper as a test.

For what type of device

For the Moser Genio Plus hair clipper, type 1854, with the detachable Magic Blade blade. For the ChromStyle Pro, which uses the same blade, Moser does not confirm the part. Check the type on the clipper label and the code of the old part before ordering.

What else you need

• Moser Genio Plus Motor 1854-7060
• Moser Genio Plus Battery 1854-7988
• Moser ChromStyle Pro Battery 1871-7960
• Blade oil
• Cooling and cleaning spray for blades

ProBeauty tip. When removing the Genio Plus blade, slide it off the housing as shown in the manual and do not force it sideways. The parts around it will last longer.

The Moser ChromStyle Pro Battery 1871-7960 is the replacement battery for the Moser ChromStyle Pro hair clipper. Moser's official parts list specifies it for the black and white ChromStyle Pro and the 1871-0078 set. The manual states that the clipper uses a LiFePO4 lithium-ion battery. Replace it when the clipper's cordless runtime becomes increasingly short.

What it does for you

• Restore full runtime: Moser states that the ChromStyle Pro provides up to 90 minutes of cordless runtime.
• Fast charging: according to the manual, the clipper charges in approximately 60 minutes.
• No memory effect: Moser describes the clipper's lithium batteries as durable and free from memory effect.
• Battery only: Moser's parts list specifies the circuit separately, so you only pay for the worn part.

How to use it at home

1. Clean and lubricate the blade; the manual states that a very dirty and unlubricated blade can cut the runtime in half.
2. If the clipper's runtime is still too short, take it to an authorized service center; Moser requires that batteries be replaced only there.
3. After installation, place the clipper on the stand; overcharging is prevented by the intelligent charging management system.
4. Use it corded via the power supply while the clipper is charging.

For which type of device

For the Moser ChromStyle Pro hair clipper, model 1871: 1871-0071, 1871-0072, and the 1871-0078 set, as specified in Moser's parts list. We cannot confirm compatibility with other ChromStyle clippers, including those sold under the Wahl brand. Send us the code on the label and we will check.

Specifications

What else you need

• Moser 1854-7833 stand and guide
• Blade oil
• Blade cooling and cleaning spray
• Hair clipper cape

ProBeauty tip. The Moser manual states that runtime gradually decreases with daily use, even with batteries designed for professional use. If the clipper has been used intensively for several years, it is normal for it to require a new battery.

The Moser Li+Pro Motor 1884-7020 is the replacement motor that Moser's official parts list calls the "1884 Li+Pro motor" and lists for the Li+Pro². According to Moser's data sheet, the Li+Pro has a chip-controlled DC motor with noise reduction, operating at approximately 5200 rpm. Replace it when the clipper no longer starts or loses power while cutting.

What it does for you

• Consistent power again: Moser says that the chip-controlled motor maintains consistent cutting power.
• Keep your clipper: the Magic Blade II blade, battery, and stand can be reused if they are in good condition.
• The correct part number: 1884-7020 is the motor listed in Moser's parts list.
• Work quietly: a new motor no longer makes the noise of a worn-out motor.

How to use it at home

1. Fully charge the clipper and clean the blade; a stuck blade can make a motor seem defective.
2. If it still doesn't work, take the clipper and motor to an authorized service center.
3. After installation, oil the blade and run the clipper for a few minutes.
4. When cutting long hair, take short breaks to let the blade cool down.

For which type of clipper

For Moser Li+Pro (type 1884) and Li+Pro² (type 1888) clippers, according to Moser's designation and parts list. This is not the motor for the Li+Pro Mini, which is a different clipper with a narrower blade. If you don't know the type, check the label on the clipper.

Specifications

What else you need

• Moser Li+Pro 1884-7100 battery with circuit
• Blade oil
• Blade cooling and cleaning spray
• Clipping cape

ProBeauty tip. The Li+Pro has an indicator that shows you when the blade needs to be oiled. Don't ignore it: a dry blade puts extra strain on the motor and wears it out faster.

The Moser Li+Pro Battery with Circuit 1884-7100 is the battery and electronic board assembly for the Moser Li+Pro clipper. The Li+Pro can be used corded or cordless, according to Moser. Replace it when the clipper holds its charge for less and less time or no longer charges.

What it does for you

• Cut cordlessly again: without a good battery, the Li+Pro remains plugged in.
• Order by code: compare 1884-7100 with the code on the old part before installation.
• One-piece battery and circuit: the service center replaces the assembly, not individual parts.
• You can also work corded: until installation, the clipper can be used plugged in.

How to use it at home

1. First, check the stand, power supply, and charging contacts.
2. Take the clipper and part to a service center; Moser requires that batteries be replaced only there.
3. After installation, fully charge the clipper on the stand before the first cut.
4. Clean and lubricate the blade after each use so that the battery lasts as long as possible.

For what type of device

For the Moser Li+Pro clipper, type 1884, the one with the Magic Blade II blade. Code 1884-7100 does not appear in the parts list published by Moser, and for the Li+Pro², the list shows a different battery. Check the type on the clipper's label and the code of the old part before ordering.

What else you need

• Moser Li+Pro 1884-7020 Motor
• Blade oil
• Blade cooling and cleaning spray
• Hairdressing cape

ProBeauty Tip. Moser manuals state that you should not leave the clipper exposed to frost or high heat for long periods. Do not leave it in the car during summer or near a heater.

The Moser Edition Pro Motor for dryer 0210-7251 is the replacement motor for the Moser Edition Pro professional hair dryer. According to the Moser data sheet, the Edition Pro has a safety thermostat and a removable filter that you can clean. Replace it when the dryer no longer blows, blows weakly, or the motor makes noise.

What it does for you

• The dryer blows powerfully again: the motor is what provides the airflow for fast drying.
• You don't buy another dryer: the housing, heating element, and nozzles remain, if they are in good condition.
• The dryer remains the one you know: the speed and heat settings and the cool air button remain the same.
• Service repair: installation is done with original parts, as required by Moser.

How to use it at home

1. Unplug the dryer and let it cool down.
2. Remove the filter and clean it; a clogged filter suffocates the motor.
3. If the dryer still doesn't work well, take it with the new motor to an authorized service center.
4. After installation, turn it on at the low setting first and listen to see if it runs evenly.

For what type of device

For the Moser Edition Pro hair dryer, type 4330/4331. Moser does not publish the parts list for this dryer, so check the type on the device label before ordering. It is not a part for clippers or other dryers.

What else you need

• Heat protection spray
• Heat protection spray for smoothing
• Round brush for drying

ProBeauty tip. Clean the dryer filter once a week if you use it daily. The air passes freely, the motor does not overheat, and the thermostat does not stop the dryer in the middle of styling.