BaBylissPRO SkeletonFX T-Blade Gold Titanium FX707G2ZE 40 mm
Replacement T-Blade Knife
Out of stock
- Produse 100% originale
- Câștigi puncte de loialitate
Descriere
The BaByliss PRO SkeletonFX FX707G2ZE is a 40 mm gold titanium-coated T-blade with 2 mm deep teeth. Use it with the SkeletonFX FX7870, SnapFX FX797E, and LO-PROFX FX726 trimmers. It is designed for clean outlines, sharp lines, and detailing.
What it does for you
- Creates clean outlines and sharp lines thanks to its 2 mm deep teeth.
- Stays sharp longer: titanium is a hard, durable coating, according to the brand.
- Is gentler on sensitive skin because titanium has hypoallergenic properties.
- Cuts through thick or coarse hair when working on edges and details.
- Adjusts to a zero-gap setting for trimming very close to the skin.
How to use it at home
- Turn off the trimmer.
- Remove the old blade with a screwdriver.
- Place the new blade on the trimmer and make sure it is positioned correctly, parallel to the housing.
- Tighten the screws and turn on the trimmer for a few seconds to make sure it runs smoothly.
- Clean and lubricate the blade regularly, before and during use, with BaByliss PRO 4-in-1 spray.
What type of trimmer it is for
It fits the SkeletonFX FX7870 trimmers, including Gold and Boost+ Gold, SnapFX FX797E, and LO-PROFX FX726, as well as other trimmers with a two-hole blade system. The brand recommends it for thick or coarse hair and less sensitive skin. It is not for hair clippers with a 45 mm blade.
Specifications
| Type | T-blade, deep teeth |
|---|---|
| Width | 40 mm |
| Teeth | 2.0 mm |
| Material | gold titanium-coated blade |
| Adjustment | zero-gap |
| Compatibility | FX797E, all FX7870 and FX726, two-hole blade systems |
What else you need
- BaByliss PRO SkeletonFX Gold FX7870GE Trimmer
- BaByliss PRO Boost+ SkeletonFX Gold FX7870GBPE Trimmer
- BaByliss PRO 4-in-1 Blade Care Spray
- Wahl Blade Lubricating Oil, 100 ml
ProBeauty Tip. The FX707G2ZE maintains the gold appearance of the SkeletonFX Gold trimmer. Keep it on hand as a spare blade for sharp lines and beard trimming.
Ce să nu faci
- Do not install it on hair clippers with a 45 mm blade, such as the FX8700 series.
- Do not tighten the screws before checking that the blade is parallel to the housing.
- Do not operate without applying maintenance spray or oil to the blade.
Întrebări frecvente
E potrivit pentru piele sensibilă?
Brandul spune că titanul are proprietăți hipoalergenice. Totuși, dinții adânci de 2 mm sunt recomandați pentru păr gros și piele mai puțin sensibilă, așa că pe piele delicată lucrează fără apăsare.
Ce diferență e între FX707G2ZE și FX707C2ZE?
Au aceeași formă, lamă T de 40 mm cu dinți adânci de 2 mm, acoperită cu titan. Diferă finisajul: FX707G2ZE e varianta Gold, iar FX707C2ZE e varianta ChameleonFX.
Livrare și retur
Cost de livrare începând de la 19,90 lei. Livrare gratuită peste 250 lei.
14 zile drept de retur dacă nu ești 100% mulțumit(ă) de produs.
De ce să alegi BaBylissPRO ?
✔ Expertiză de peste 60 de ani
Moștenirea noastră pornește din Paris, capitala modei, și continuă să inspire profesioniști din peste 100 de țări.
✔ Tehnologie de ultimă generație
De la EP Technology 5.0 la sistemul IonMultiplier, fiecare produs este proiectat pentru performanță constantă și protecție maximă a părului.
✔ Instrumente aprobate de profesioniști
BaBylissPRO este alegerea stiliștilor de top, folosită în saloane, academii și backstage la prezentări internaționale.
✔ Design versatil și ergonomic
Fiecare detaliu este gândit pentru confort, control și rezultate impecabile – fie că îndrepți, ondulezi sau coafezi.
✔ Durabilitate și fiabilitate
Materiale premium și testare riguroasă pentru a rezista zilnicelor provocări din salon sau acasă.
Cumpără cu încredere de la PROBEAUTY
Peste 250 lei, transportul e gratuit
Pachete care îți completează comanda
Branduri profesionale, stoc real
Poate mai arunci o privire
- Choosing a selection results in a full page refresh.
- Opens in a new window.
Mai ai 250 lei până la transport gratuit
Mai ai 250 lei până la transport gratuit
