Hair removal

ETB Wax 90 m Hair Removal Wax Strips Roll is a lint-free paper roll for single-use wax hair removal. It is 7 cm wide, and you cut pieces to the length you need. The paper does not leave lint on the skin.

What it does for you

• Does not leave lint on the skin, because the paper is lint-free.
• Cut the strip to fit the area: long for legs, short for underarms or the upper lip.
• You get strips for many sessions from a single 90 m roll.
• Adheres well to single-use wax, as recommended on the label.
• White and simple, so you can easily see how much hair the strip has removed.

How to use it at home

1. Heat the wax according to the instructions on its packaging.
2. Cut a piece from the roll slightly longer than the area where you applied the wax.
3. Place the strip over the wax and press it down firmly, smoothing it in the direction of hair growth.
4. Remove the strip with a firm motion, in the opposite direction of hair growth.

For what type of work

For single-use wax hair removal, such as roll-on wax in a cartridge. The roll is practical if you remove hair from different areas and want strips of different lengths. If you prefer pre-cut strips, ETB Wax also has 7 x 20 cm hair removal strips. You do not need it for hard wax beads, which lift off the skin on their own.

Specifications

What else you need

• Pink roll-on wax 100 ml
• Green roll-on wax 100 ml
• Mono wax heater 100 ml
• Post-hair removal cleansing oil with aloe vera
• Talc powder for hair removal

ProBeauty tip. Cut a few strips of different lengths at the beginning and keep them close by. With wax applied to the skin, you won't have time to look for scissors.

ETB Wax Yellow Roll-On Wax 100 ml is a single-use hair removal wax in a cartridge with a wide applicator. It has a short list of four ingredients and contains no colorant. It is heated in a wax heater and removed with hair removal strips.

What it does for you

• Hot wax hair removal with no preparation: place the cartridge in the heater and wait.
• An even layer with no waste, thanks to the wide applicator that rolls the wax onto the skin.
• Ready in about 20 minutes after plugging in the heater.
• Suitable for different skin types, including difficult areas.
• Simple formula: resin, mineral oil, beeswax, and microcrystalline wax, with no colorant.

How to use it at home

1. Place the cartridge in the heater and plug it in.
2. After about 20 minutes, the wax will reach the ideal temperature for hair removal.
3. Roll the wax on in the direction of hair growth.
4. Apply a hair removal strip over the wax and smooth it down.
5. Pull the strip off quickly in the opposite direction of hair growth.
6. Finish with an oil after hair removal to remove any wax residue.

For which skin type and area

It can be used on different skin types and is suitable even for difficult areas. If you prefer a product with no colorant, yellow is the choice in the ETB Wax roll-on range. It is not a hard wax: without strips, you cannot remove it from the skin. You will also need a heater for 100 ml cartridges.

What else you need

• 100 ml Mono Wax Heater
• ProWarm Trio 3 x 100 ml Heater Set
• 90 m Hair Removal Strips
• Argan Post-Hair Removal Cleansing Oil
• Lavender Pre-Hair Removal Oil
• Talcum Powder for Hair Removal

ProBeauty Tip. Lightly powder clean, dry skin before applying the wax. The wax grips the hair better, and the skin feels less sticky after you pull off the strip.

ETB Wax Pink Roll-On Wax 100 ml is a single-use hair removal wax in a cartridge with a wide applicator. The label describes it as a hair removal wax with titanium dioxide. You heat it in a wax heater, apply it with the roller, and remove it with hair removal strips.

What it does for you

• Remove hair with hot wax at home, without a pot or spatula: the cartridge heats directly in the heater.
• Cover large areas quickly, as the wide applicator applies an even layer in a single pass.
• It is ready to use in about 20 minutes after connecting the heater.
• It works on different skin types and can also be used on areas that are harder to depilate.
• Work cleanly: the wax is single-use, so you do not reuse the wax removed from the skin.

How to use it at home

1. Place the wax cartridge in the heater and plug the device into an outlet.
2. Wait about 20 minutes until the wax reaches the right temperature.
3. Roll the wax onto the skin in the direction of hair growth.
4. Place a hair removal strip over the layer of wax and press it down firmly.
5. Pull the strip off quickly, in the opposite direction of hair growth.
6. Finally, apply a post-hair removal oil to the treated area.

For what skin type and area

ETB Wax is suitable for different skin types and for cases where hair removal is more difficult. It is a strip wax, not a hard wax: it does not lift off the skin on its own, like beads. You need a 100 ml cartridge wax heater and hair removal strips or a roller.

The pink, yellow, green, and blue ETB Wax roll-on waxes have the same base in the list of ingredients. The coloring differs, and the pink one also contains titanium dioxide.

What else you need

• 100 ml Mono Wax Heater
• ProWarm Duo 2 x 100 ml Heater Set
• 90 m Hair Removal Roller
• Post-Hair Removal Cleansing Oil with Aloe Vera
• Pre-Hair Removal Foam with Lemon
• Talcum Powder for Hair Removal

ProBeauty Tip. Work in small sections and apply the strip immediately after rolling on the wax, while it is still fluid. If you wait, the wax cools on the skin and the strip no longer grips the hairs as well.

ETB Disposable 70 m Disposable Paper Sheet Roll is a white roll 60 cm wide, made of 2-ply cellulose. You spread it over the waxing bed, massage table, or sofa before the procedure. After use, you tear off the piece and throw it away, leaving the bed clean.

What it does for you

• The bed stays clean: wax residue, oil, or creams end up on the paper, not on the upholstery.
• Each person lies on a fresh surface, because you change the piece after each procedure.
• Cut as much as you need from a 70 m roll.
• 2-ply paper, made of cellulose, more resistant than a single sheet.
• 60 cm wide, suitable for a beauty bed or massage table.

How to use it at home

1. Place the roll at the end of the bed or table and unroll the paper along its entire length.
2. Tear or cut off a piece once you have covered the entire surface.
3. Perform the procedure: waxing, massage, or beauty treatment.
4. At the end, gather the paper inward so the residue stays inside, and throw it away.

What it is for

For waxing, massage, beauty treatments, and any procedure on a bed or table, at home or in a salon. At home, you can also spread it over a sofa or bed when waxing yourself. It is paper, so it is not designed for wet surfaces. If you want a softer and more resistant material, the non-woven bed sheet is the right option.

Specifications

What else you need

• ETB Wax Pink Pearl Hard Wax 1 kg
• ETB Wax Pro Advance Wax Heater 800 ml
• ETB Wax Wooden Spatulas
• ETB Wax Post-Waxing Oil with Aloe Vera
• Disposable Fitted Bed Sheet
• Disposable Towels 45 x 80 cm

ProBeauty Tip. When waxing at home with hot wax, place the sheet under your feet on the floor. Wax drops fallen on tiles or carpet are much harder to clean than you think.

ETB Wax Green Roll-On Wax 100 ml is a single-use hair removal wax in a cartridge with a wide applicator. You use it with a cartridge heater and hair removal strips. It is suitable for different skin types.

What it does for you

• Get rid of the mess: you only heat the cartridge, directly in the device.
• Control how much you apply, because the wide roller leaves a thin and even layer.
• Start hair removal after approximately 20 minutes of heating.
• Use the same wax on multiple areas, including those where hair removal is more difficult.
• Easily see where you have applied it, thanks to the green color on the skin.

How to use it at home

1. Place the wax cartridge in the heater and plug the device into the outlet.
2. Leave the wax for approximately 20 minutes until it reaches the right temperature.
3. Apply the wax with the roll-on, in the direction of hair growth.
4. Place the hair removal strip over the layer and press it onto the skin.
5. Pull the strip quickly in the opposite direction of hair growth.
6. Apply an after-hair removal oil to the treated area.

For what skin type and area

ETB Wax recommends it for different skin types and for difficult hair removal cases. It is a strip wax, so you cannot remove it like pearl elastic wax. It has the same ingredient base as the other ETB Wax roll-on colors; the green color comes from the CI 61565 dye. If you have never used roll-on wax before, start with a small area, such as the calf.

What else you need

• 100 ml Mono Wax Heater
• ProWarm Duo 2 x 100 ml Heater Set
• 90 m Hair Removal Roller
• After-Hair Removal Gel with Camphor and Menthol
• Pre-Hair Removal Foam with Lime

ProBeauty Tip. Stretch the skin with your free hand while pulling the strip. Stretched skin hurts less, and the hair comes out cleaner and more thoroughly at the knees and ankles.

ETB Wax Elastic Wax Pink Beads 1 kg is a hot hair removal wax in beads that you melt in a heater and pull off without strips. Its name includes TiO2, which means titanium dioxide. The front of the bag says "Made in Italy".

What it does for you

• Remove hair without strips. The wax hardens on the skin and you pull it off directly, like a strip.
• Spreads easily because it has a soft and elastic texture.
• Peels off easily from the skin, as described by ETB.
• Works on all areas of the body, says the product sheet.
• Melt only what you need. The beads are easy to measure, and the rest stays in the bag for next time.

How to use it at home

1. Put the beads in the heater container and let them melt.
2. Check the wax temperature on a small area of skin before you start.
3. Spread the hot wax with a spatula in the direction of hair growth.
4. Wait for it to harden until it is no longer sticky to the touch.
5. Grab the edge and pull the strip off quickly in the opposite direction of hair growth.
6. Finally, clean up the residue and moisturize the skin with a post-hair removal oil.

For what skin type and area

ETB says it is for all areas of the body. The sheet says nothing about sensitive skin or the face, so work on small areas there and test first. It is not a roll-on wax or one with strips: you need a heater with a container and a spatula. The 1 kg pink, yellow, green, and aloe vera variants have the same description at ETB, only the color differs.

What else you need

• ETB Wax Pro Advance 800 ml Wax Heater
• ETB Wax Wooden Spatulas
• Protective paper for the heater
• ETB Wax Post-Hair Removal Oil with Aloe Vera
• ItalWax Talc Powder for before hair removal

ProBeauty Tip. Leave the bottom edge of the layer slightly thicker than the rest. From there you grab the strip easily, without looking for it with your nail, and the pulling comes out in a single motion.

ETB Wax 100 pre-cut hair removal strips are ready-to-use strips made of high-cellulose content paper. Each measures 7 x 20 cm. Use them for single-use wax hair removal, for example with roll-on wax.

What they do for you

• No more cutting strips: they are ready at the size of 7 x 20 cm.
• They grip the wax well, because the paper is rich in cellulose.
• You get a hundred pieces in one pack, enough for several sessions.
• White and clean, you can immediately see how many hairs each strip removed.
• They are compatible with any single-use wax, not just ETB Wax.

How to use them at home

1. Heat the wax and spread it on the skin in the direction of hair growth.
2. Place the strip over the layer of wax and press it down firmly, in the direction of the hair.
3. Hold the skin taut with the other hand.
4. Pull the strip quickly, in the opposite direction of hair growth.

For what type of work

For single-use wax hair removal on the legs, arms, or underarms. For small areas, such as the upper lip, cut the strip in half. These are not pre-applied cold wax strips: you need heated wax separately. If you want strips of different lengths, choose the ETB Wax 90 m hair removal roll.

Specifications

What else you need

• 90 m hair removal roll
• 100 ml pink roll-on wax
• 100 ml mono wax heater
• Post-hair removal cleansing oil with aloe vera
• Pre-hair removal foam with lime

ProBeauty tip. Leave one end of the strip free, without wax under it. You can grip it more easily between your fingers and pull it in one motion, without the strip hesitating on the skin.

ItalWax Elastic Wax Full Body Pearls 100gr

Italwax Elastic Full Body wax is an elastic, gold-colored granular wax. It is a luxurious, premium quality depilatory wax and can be used for full body hair removal. Full Body wax is specially designed for hair removal from any part of the body, even sensitive areas. Its delicate formula gives it special malleability, making it easy to apply with a spatula, both on large body surfaces, such as the back, and on smaller areas. The wax spreads easily and adheres perfectly to the hairs. The elastic wax film, with a silky consistency, can be easily removed from the skin without using depilatory strips and leaves no sticky feeling on the skin or wax residue. For healthy skin and successful hair removal, we recommend using pre- and post-epilation products from the ItalWax range. ItalWax products are created from carefully selected ingredients and with a wide range of professional products that cover all needs. These products can be used both in beauty salons and at home.

Features:

-Luxurious depilatory wax

-Recommended for any skin and hair type

-Ideal for any body surface or the entire body

-Removes even very stiff hair after shaving

-Perfectly molds

-Allows gripping of any hair, even 1mm

How to use:

-Use disposable gloves.

-Pour the required amount of wax into the wax heater container.

-Heat the wax to the appropriate temperature.

-For large areas, it is recommended to use a large spatula.

-Stir the wax occasionally to check the consistency; the wax is ready for application when it reaches the consistency of melted honey.

-Apply a thin layer of wax to the desired area with a spatula in the direction of hair growth.

-Using the edge of the spatula, form a grip area from the wax.

-Wait a few seconds for the wax to harden.

-Pre-stretch and hold the skin in the opposite direction of removal.

-Remove the wax with sudden movements, parallel to the skin.

-If necessary, repeat the procedure.

For a complete procedure and healthy skin, we recommend using pre- and post-epilation products.

Weight: 1000Gr

ItalWax White Chocolate Elastic Wax Beads

This elastic wax in bead form allows hair removal for any skin and hair type, on any body surface, even in hard-to-reach areas. It perfectly conforms to the contours of the area to be epilated, allows grasping very short hairs, even those 1 mm long, and, when used correctly, can remove even very stiff hair after shaving. It is recommended to apply a thin layer with a spatula. It is a medium-density wax containing titanium dioxide. It is characterized by a high level of flexibility that does not create elastic threads. It does not cause irritation or redness on the skin. Effective wax for removing thick and short hairs. It has a pleasant chocolate aroma. Hardening time: 6 - 7 seconds. ItalWax products are created from carefully selected ingredients and offer a wide range of professional products that cover all needs. These products can be used both in beauty salons and at home.

Features:

-Recommended for any skin and hair type

-Ideal for any body surface

-Removes even very stiff hair after shaving

-Perfectly conforms

-Allows grasping any hair, even 1mm long

-Hardening time 6-7 seconds

How to use:

-Use disposable gloves.

-Pour the required amount of wax into the wax heater container.

-Heat the wax to the appropriate temperature.

-For large areas, it is recommended to use a large spatula.

-Stir the wax occasionally to check consistency; the wax is ready for application when it reaches the consistency of melted honey.

-Apply a thin layer of wax to the desired area with a spatula in the direction of hair growth.

-Using the edge of the spatula, form a gripping tab from the wax.

-Wait a few seconds for the wax to harden.

-Stretch and hold the skin taut in the opposite direction of removal.

-Remove the wax with a brisk movement, parallel to the skin.

-If necessary, repeat the procedure.

For a complete procedure and healthy skin, we recommend using pre- and post-epilation products.

Weight: 100Gr

ETB Wax Yellow Elastic Wax Beads 1 kg is a hot wax for hair removal, in beads, that melts in the heater and is pulled off without strips. It has a soft and elastic texture and spreads easily. On the front of the bag it says "Made in Italy".

What it does for you

• Epilate without strips. The hardened wax becomes the strip itself that you pull.
• Spreads easily in a uniform layer, thanks to the soft and elastic texture.
• Comes off easily from the skin when you pull it.
• Works on all areas of the body, according to the ETB sheet.
• Retains its qualities even when you use it for a long time, says ETB, so the 1 kg bag does not spoil from one session to another.

How to use it at home

1. Melt in the heater as many beads as you need for the area to be epilated.
2. Test the wax on a small area of skin to see if the temperature is tolerable.
3. Spread it hot with a spatula, in the direction of hair growth.
4. Leave it to harden, until it no longer sticks to your finger.
5. Pull the strip off in one motion, against the direction of hair growth.
6. Clean up the residue and moisturize the skin with a post-epilation oil.

For what type of skin and area

ETB recommends it for all areas of the body. The sheet does not give indications for sensitive skin or for the face, so on delicate areas you work on small portions. It is not a roll-on wax: it needs a heater with a container and a spatula. The 1 kg yellow, pink, green, and aloe vera variants have the same description, you choose by color.

What else you need

• ETB Wax Pro Advance 800 ml Wax Heater
• ETB Wax Wooden Spatulas
• Protective paper for the heater
• ETB Wax Post-Epilation Oil with Argan
• ItalWax Pre-Epilation Foam with Lime

ProBeauty Tip. On the legs, work on palm-sized strips, not the whole leg at once. Small strips harden uniformly and you pull them off more easily, in a single motion.

The ETB Wax Disposable Wooden Spatula is a tool for spreading hot wax onto the skin. You can use it on almost the entire body, including the underarms, groin area, and face. The edges are well-sanded, and the wood is treated to prevent splintering.

What it does for you

• Spreads wax evenly in a controlled layer over the area you are epilating.
• Does not scratch. The edges are sanded, and the wood is treated during manufacturing to prevent splintering.
• Simple hygiene: use it once and throw it away.
• Works on almost the entire body, from the underarms and groin area to the face.
• Can also be used for cosmetics. ETB says you can use it to prepare and apply creams and lotions.

How to use it at home

1. Use a new spatula for each person or session.
2. Dip it into the melted wax and drain the excess over the edge of the container.
3. Spread the wax on the skin in the direction of hair growth, holding the spatula at an angle.
4. Once it has touched the skin, do not dip it back into the wax: use a new spatula for the next application.
5. When finished, throw it away.

What it is for

For hot wax from a wax heater, such as ETB Wax beads and coins, and for preparing creams or lotions. It is not for roll-on wax, which has its own applicator. It is not a spatula to keep, as the wood cannot be sterilized.

What else you need

• ETB Wax Pink Elastic Wax Beads 1 kg
• ETB Wax Pro Advance Wax Heater 800 ml
• Protective paper for wax heater
• ETB Wax Orange Touch Vegan Synthetic Wax 800 g
• ETB Wax Post-Epilation Oil with Argan

ProBeauty Tip. For eyebrows or above the lip, use the tip of the spatula, not its flat side. The wax comes out in a narrow strip, and you can better control the outline.

ETB Wax Aloe Vera Elastic Wax Beads 1 kg is a hot wax for hair removal in beads, which you melt in a wax heater and pull off without strips. Aloe Vera is the name of the variant, and the ETB description is the same as for the other 1 kg beads. The front of the bag says "Made in Italy".

What it does for you

• Remove hair without strips. The wax hardens on the skin and you pull it off directly.
• Spreads easily, because the texture is soft and elastic.
• Is easily removed when you pull the strip, says ETB.
• Works on all areas of the body, according to the product sheet.
• Retains its characteristics even with prolonged use, so the 1 kg bag lasts for several sessions.

How to use it at home

1. Melt the beads in the wax heater.
2. Check the temperature on a small area of skin.
3. Spread the hot wax with a spatula, in the direction of hair growth.
4. Leave it to harden until it no longer sticks.
5. Pull the strip off quickly, in the opposite direction of hair growth.
6. Clean up the residue and moisturize the skin with a post-hair removal oil.

For what type of skin and area

ETB recommends it for all areas of the body. The sheet does not give separate indications for sensitive skin or for the face, so there you start with a small portion. It is not a roll-on wax and is not used with strips. The 1 kg aloe vera, pink, yellow, and green variants have the same description at ETB, choose by color.

What else you need

• ETB Wax Pro Advance 800 ml Wax Heater
• ETB Wax Wooden Spatulas
• Protective paper for wax heater
• ETB Wax Post-Hair Removal Oil with Aloe Vera
• ItalWax Nirvana Pre-Hair Removal Oil with Lavender

ProBeauty's tip. Remove hair from clean and completely dry skin, without cream. On oily or damp skin, the wax grips the hair more difficultly.

ETB Wax Elastic Wax Beads Green 1 kg is a hot wax for hair removal, in beads, that melts in the heater. Once it hardens, you pull it off directly, without strips. On the front of the bag it says "Made in Italy".

What it does for you

• You don't need strips, because the hardened wax pulls off by itself, like a strip.
• It spreads easily and evenly, it has a soft and elastic texture.
• It comes off easily from the skin, according to the ETB description.
• You use it on all areas of the body, says the product sheet.
• It stays just as good over time. ETB says that it keeps its characteristics even with prolonged use.

How to use it at home

1. Put the beads in the heater and let them melt.
2. Test the heat of the wax on a small area of skin.
3. Spread the hot wax with a spatula, in the direction of hair growth.
4. Wait until it hardens and is no longer sticky.
5. Pull the strip off quickly, in the opposite direction of hair growth.
6. Remove the residue with a post-hair removal oil.

For what type of skin and area

ETB gives it for all areas of the body. The sheet does not talk about sensitive skin or the face, so there you start with a small portion. It is not a wax with strips nor a roll-on. The green version has the same description as the pink, yellow and aloe vera versions of 1 kg.

What else you need

• ETB Wax Pro Advance 800 ml Wax Heater
• ETB Wax Wooden Spatulas
• Protective paper for wax heater
• ETB Wax Post-Hair Removal Oil with aloe vera
• ETB Wax Post-Hair Removal Gel with camphor and menthol

ProBeauty's tip. Stretch the skin with the free hand right at the moment of pulling. Stretched skin hurts less, and the hairs come out cleaner.

ETB Disposable Bed Cover with elastic is a single-use cover that fits over a cosmetic or massage bed like a fitted sheet. It grips the edges and stays in place without wrinkling. After the treatment, simply remove it and throw it away, with no laundry to wash.

What it does for you

• Keeps the bed clean, as the skin does not come into direct contact with the upholstery.
• Stays in place without wrinkling: the elastic keeps it securely fitted to the bed.
• Takes just a few seconds to put on and can be changed immediately after each person.
• Feels pleasant to the touch, as the material is soft.
• No more washing linens after every waxing or massage treatment.

How to use it at home

1. Unfold the cover and locate the elasticated corners.
2. First, stretch the elastic over one end of the bed, then pull it over the other end.
3. Smooth out the surface and, if desired, place a piece of roll sheet over it.
4. After the treatment, remove the cover by gathering it inwards and throw it away.

What it is suitable for

For cosmetic beds, massage beds, or waxing beds in salons, spas, or at home, if you have a treatment bed. The product sheet also recommends it for mobile beauty services. It is not a fabric cover and is not washable. The dimensions are not published, so its fit on very wide beds cannot be guaranteed.

What else you may need

• 70 m roll of disposable paper sheet
• Roll of cut non-woven sheet
• 40 x 70 cm disposable towels
• ETB Wax pink elastic pearl wax 1 kg
• ETB Wax post-waxing oil with aloe vera

ProBeauty Tip. If you perform waxing treatments at home for friends, keep a new cover for each person. It shows you care, and you won't have to spend time washing and ironing the linens after every visit.

ETB Wax Hair Removal Strips 50 pcs are pre-cut strips, measuring 7 x 20 cm, for single-use wax hair removal. The small pack is ideal if you are just starting with roll-on wax or only removing hair from a few areas. Use them with separately heated wax.

What they offer you

• Start hair removal immediately, without having to cut strips from a roll.
• They are easy to handle: 7 x 20 cm, large enough to cover a section of your leg.
• A small pack to try: 50 pieces, enough for your first few sessions at home.
• They work with roll-on wax and other single-use waxes that are removed with strips.
• They take up little space in your drawer or hair removal kit.

How to use them at home

1. Heat the wax and apply a thin layer in the direction of hair growth.
2. Place the strip over the wax layer and press it down with the palm of your hand.
3. Stretch the skin with your other hand.
4. Pull the strip off quickly, in the opposite direction of hair growth.

What they are for

For single-use wax hair removal at home on the legs, arms, or underarms. For smaller areas, you can cut the strip into shorter pieces. They do not contain wax, so you need separately heated wax. If you remove hair frequently, the 100-piece pack or 90 m roll will last longer.

Specifications

What else you need

• 90 m hair removal roll
• 100 ml yellow roll-on wax
• 100 ml mono wax heater
• After-hair removal gel with camphor and menthol
• Talc powder for hair removal

ProBeauty tip. Keep the pack closed and away from moisture. Damp or bent strips do not adhere evenly to the wax and leave hair behind.

Non-woven polypropylene bed sheet on a roll.

Antibacterial effect.

WIDTH 60CM X 70M LENGTH.

ItalWax Lemon Post-Epilation Oil

This post-epilation oil has a cleansing, hydrating, and soothing effect, enriched with lemon essential oil and Vitamins A, B, P, C. The lemon essential oil extract contains various organic acids: citric, malic, and ascorbic. The post-epilation oil completes the epilation process, improving the skin's appearance after waxing. Lemon post-epilation oil helps remove wax residues and eliminates the sticky sensation that can occur after waxing.

Features:

-Cleanses the skin of sticky wax residues after the procedure

-Hydrates

-Soothes

-Carefully selected ingredients

How to use: Spray the oil directly onto the depilated skin and gently massage into the skin to cleanse the depilated skin of sticky wax residues and soothe irritated skin.

ItalWax Elastic Wax Pink Pearls 1000g

This is an elastic pearl-type wax that allows for easy hair removal in the armpit, bikini, and facial areas and is very effective in removing thick and very short hairs. It is characterized by a high level of flexibility that does not create elastic strands and can be easily used by less experienced individuals, as it has a longer setting time (10-12 seconds). It molds perfectly to the contour of the area to be epilated, allowing it to grip very short hairs, even those as short as 1 mm, and, when used correctly, to remove even very stiff hair after shaving. It is recommended to use a thin layer applied with a spatula. It is a medium-density wax containing titanium dioxide. It does not cause irritation or redness on the skin. It has a pleasant fruity aroma. Setting time: 10-12 seconds. ItalWax products are made from carefully selected ingredients and offer a wide range of professional products that cover all needs. These products can be used in beauty salons as well as at home.

Features:

-Recommended for armpit, bikini, and face areas

-Removes even very stiff hair after shaving

-Molds perfectly

-Allows gripping of any hair, even 1mm long

-Slower setting time 10-12 seconds

How to use:

-Use disposable gloves.

-Pour the required amount of wax into the wax heater container.

-Heat the wax to the appropriate temperature.

-For large areas, it is recommended to use a large spatula.

-Stir the wax from time to time to check the consistency; the wax is ready for application when it reaches the consistency of melted honey.

-Apply a thin layer of wax to the desired area with a spatula in the direction of hair growth.

-Using the edge of the spatula, create a grip area from the wax.

-Wait a few seconds for the wax to set.

-Stretch and hold the skin taut in the opposite direction of removal.

-Remove the wax with quick movements, parallel to the skin.

-If necessary, repeat the procedure.

For a complete procedure and healthy skin, we recommend using pre- and post-epilation products.

Weight: 1000g

ItalWax Elastic Wax Azulene Green Pearls 1000gr

This is an elastic wax with Azulene that allows hair removal for any skin and hair type, on any body surface, even in hard-to-reach areas. It perfectly adapts to the contours of the area to be epilated, allowing each hair to be gripped very close to the skin and offering easy and very efficient hair removal. Azulene has anti-inflammatory, soothing, bacteriostatic, and bactericidal properties. It is recommended to use a thin layer applied with a spatula. The film wax does not break during the depilation procedure. Film wax is an improved version of classic hot wax. Due to the addition of specific and innovative elements, this wax has established and advantageous properties: it has a much lower melting temperature (40-45 ° C).
Azulene Elastic Wax removes all hairs without irritating the skin, reducing the sensation of pain. For healthy skin and successful hair removal, we recommend using pre- and post-epilation products from the ItalWax range. ItalWax products are made from carefully selected ingredients and offer a wide range of professional products that cover all needs. These products can be used both in beauty salons and at home.

Features:

-Recommended for any skin and hair type

-Ideal for any body surface

-Perfectly adapts

-Allows gripping every hair

-Moisturizing effect

-Very low melting temperature (40-45 ° C).

How to use:

-Use disposable gloves.

-Pour the necessary amount of wax into the wax heater container.

-Heat the wax to a temperature of 40°- 45 ° C.

-For large areas, it is recommended to use a large spatula.

-Stir the wax occasionally to check the consistency; the wax is ready for application when it reaches the consistency of melted honey.

-Apply a thin layer of wax to the desired area with a spatula in the direction of hair growth.

-Using the edge of the spatula, form a grip area from the wax.

-Wait a few seconds for the wax to harden.

-Pre-tension and hold the skin in the opposite direction of the tear.

-Remove the wax with quick movements, parallel to the skin.

-If necessary, repeat the procedure.

For a complete procedure and healthy skin, we recommend using pre- and post-epilation products.

Weight: 100Gr

ETB Wax Protective Paper for 800 ml Wax Heater is a paper collar that attaches to the rim of the wax container or tin. It stops drips from running down the device or onto the table. It fits 800 ml heaters.

What it does for you

• The heater stays clean. Wax drips stop on the paper, not on the casing.
• The work surface doesn't get dirty when you remove the wax with a spatula.
• Fits most containers used for heating wax, says ETB.
• Easy to put on and take off, without tools.
• Works with 800 ml heaters, such as the ETB Wax Pro Advance.

How to use it at home

1. With the heater turned off and cool, place the paper around the rim of the wax container or tin.
2. Press it gently onto the rim to keep it in place.
3. Turn on the heater and melt the wax as usual.
4. Drip excess wax from the spatula onto the protected rim.
5. When the paper has collected wax, let it cool and replace it.

For what type of heater

For 800 ml heaters and most containers used for melting wax, such as wax tins. It is not for 100 ml roll-on heaters, where the wax is enclosed in a reservoir. It does not replace cleaning the device; it simply makes it less frequent.

What else you need

• ETB Wax Pro Advance 800 ml Wax Heater
• ETB Wax Wooden Spatulas
• ETB Wax Yellow Elastic Wax Beads 1 kg
• ItalWax Aloe Vera Wax in a Metal Tin 800 ml
• ETB Wax Pink Elastic Wax Coins with Titanium Dioxide 1 kg

ProBeauty Tip. Always drip the spatula on the same side of the collar. This way, only one section of the paper gets covered, and the rest of the rim stays clean for longer.

ItalWax Aloe Vera Cartridge Wax 100ml

ItalWax Aloe Vera Cartridge Wax is a high-adherence wax, ideal for waxing fine and short hairs, and is used with waxing strips. It has medium plasticity, which allows for efficient and quick hair removal. It contains natural and synthetic resins, a balanced blend enriched with innovative ingredients, and Aloe Vera gives this wax analgesic and anti-inflammatory properties for the skin and helps its quick recovery after waxing. Once solidified, it forms a thin film on the skin, capturing all hair and ensuring a firm grip on the waxing strip. It does not leave the skin sticky. It removes 100% of hair without breaking it. The addition of Aloe Vera restores the skin's nutritional and protein balance, providing optimal hydration during the waxing process, whether at the salon or at home. For healthy skin and successful hair removal, we recommend using pre- and post-waxing products from the ItalWax range. ItalWax products are made from carefully selected ingredients and offer a wide range of professional products that cover all needs. These products can be used both in beauty salons and at home.

Features:

-Used with waxing strips

-Disposable cartridge wax

-Recommended for fine and short hair

-Ideal for any body area

-Molds perfectly

-Very low melting temperature (40°C).

How to use:

-Use disposable gloves.

-Heat the wax in the wax heater to 40°C.

-It is recommended to use a thin layer.

-The wax is ready to apply when it reaches the consistency of melted honey.

-Apply a thin layer of wax to the desired area using the built-in roller applicator.

-Apply the waxing strip to the waxed skin, leaving room to grip.

-Wait a few seconds for the wax to harden.

-Stretch and hold the skin in the opposite direction of removal.

-Remove the waxing strip with a sharp, swift motion, parallel to the skin.

-If necessary, repeat the procedure.

For a complete procedure and healthy skin, we recommend using pre- and post-waxing products.

Weight: 100Gr

Italwax Selfie Elastic Wax Beads for the face is the pink wax that Italwax created for delicate facial skin. It has a synthetic base, without pine resin, and a complex of natural oils that protects the skin during hair removal. It is worked at 38 °C and is pulled off without strips.

What it does for you

• Clean eyebrows, upper lip and sideburns, because it is designed exactly for these areas.
• It does not burn and does not hurt thin skin, says Italwax, and does not leave redness even on light-colored skin.
• Extra protection thanks to the complex of natural oils in the formula.
• Removes hairs of any length and thickness from the face.
• Fragrance-free, so nothing extra on the sensitive skin of the face.

How to use it at home

1. Heat the wax to 38–40 °C.
2. Clean the area with a pre-hair removal lotion and apply a little talc.
3. Eyebrows: small spatula, short strips, pressed firmly. Upper lip: hold the upper lip over the teeth so the skin is stretched and the spatula perpendicular to the skin.
4. Sideburns: for longer hairs apply in the direction of growth and pull off in the opposite direction.
5. Lift the end of the strip slightly, wait for it to harden, hold the skin and pull quickly, in the opposite direction of application.
6. At the end, soothe the skin with an after-hair removal product.

For what type of skin and area

For the face, on sensitive and thin skin: eyebrows, above the upper lip, sideburns and temples. It is not designed for the body; for underarms or legs choose a Top Line or Full Body wax. For the beard and men's face, Italwax has Pour Homme Barber Edition.

Active ingredients

• Complex of natural oils: according to Italwax, it softens the effect of the wax on the face and provides comfort during hair removal.

Specifications

What else you need

• Wax heater with 800 ml container
• Wooden wax spatulas
• Italwax talc powder, small format
• Italwax after-hair removal lotion with azulene

ProBeauty tip. On the face you work with small quantities, so the 100 g bag is good to start with. Take 500 g if you regularly remove hair from the face or for several people in the household.

Italwax Orange After-Wax Lotion removes hot wax residue and adhesive from the skin. It helps soothe and moisturize freshly waxed skin. It has a lightly cooling effect and a natural orange peel scent.

What it does for you

• Leaves no wax residue or sticky feeling on the skin.
• Soothes and moisturizes the skin after hair removal.
• Lightly cooling thanks to the menthol in the formula.
• Non-sticky: absorbs well and dries quickly.
• Orange scent and natural orange color from the terpene in the fruit peel.

How to use it at home

1. Finish hot waxing.
2. Spray the lotion onto the waxed area.
3. Spread it with gentle motions.
4. Wipe away the excess with a tissue, along with the wax residue.

For what skin type and area

Italwax recommends it after hot waxing on large areas: arms and legs. It is suitable if you want a fresh feeling. You do not need it for sugar paste residue: sugar paste is removed with water.

Active ingredients

• Orange oil and terpene: provide the natural orange scent and color.
• Menthol: provides the lightly cooling effect.

Specifications

What else you need

• Italwax Hot Wax Cartridge, Banana
• Italwax Hot Wax with Honey, 400 ml Tin
• 100 ml Cartridge Heater
• Italwax Top Line Pre-Waxing Foam with Lime
• Italwax Cosmetic Talc Powder

ProBeauty Tip. Spray from arm's length away and work in sections, leg by leg. This way, you won't waste lotion on the floor and can wipe away the residue while the wax is still soft.

✨ Pain-free, irritation-free hair removal with professional results!

ItalWax Natural Elastic Wax Beads are the ideal solution for gentle and effective hair removal, suitable for all skin and hair types. Its advanced formula allows for hair removal from the root, without irritating the skin or causing discomfort, making it perfect even for sensitive areas.

🔥 Key advantages:

✔ Suitable for all skin types, including sensitive skin

✔ Excellent adhesion to the hair, without sticking to the skin

✔ Does not break during waxing, providing a clean and efficient process

✔ Low melting temperature (40-45°C) for maximum comfort

✔ Ideal for delicate areas – underarms, bikini line, face, and arms

✔ Applies easily in a thin layer, ensuring economical use

💡 How to apply ItalWax wax?

1️⃣ Heat the wax to 40-45°C until it reaches a honey-like consistency.

2️⃣ Apply a thin layer in the direction of hair growth using a spatula.

3️⃣ Create a grip tab at the edge of the wax layer.

4️⃣ Wait a few seconds until the wax hardens.

5️⃣ Hold the skin taut and remove the wax quickly, parallel to the skin, for optimal results.

6️⃣ For soft, irritation-free skin, apply ItalWax pre- and post-waxing products.

📌 Who is it recommended for?

✔ Beauty salon professionals and home users

✔ Individuals who want irritation-free and less painful hair removal

✔ Anyone looking for a premium waxing wax with long-lasting results

ItalWax Elastic Wax Silver Pearl for Men 1000gr

This elastic wax in pearl form is specially designed for men, allowing for easy depilation. It catches all hairs and guarantees quick removal of thick, typically male hair. It easily removes 100% of unwanted hairs with a single application, reducing pain during the waxing procedure. It does not damage the skin. The Silver Elastic Wax can be used for depilation on all body areas, including the face and nose. It perfectly molds to the contours of the area to be waxed, allowing each hair to be gripped very close to the skin for easy and highly effective depilation. It is recommended to apply a thin layer with a spatula, regardless of the direction of hair growth. The film wax does not break during the depilation procedure. Film wax is an improved version of classic hot wax. Due to the addition of specific and innovative elements, this wax has established and advantageous properties: it has a much lower melting temperature (40-45 ° C). The Elastic Wax for men removes all hairs without irritating the skin, reducing the sensation of pain. For healthy skin and successful hair removal, we recommend using pre- and post-depilation products from the ItalWax range. ItalWax products are created from carefully selected ingredients and offer a wide range of professional products that cover all needs. These products can be used in beauty salons as well as at home.

Features:

-Special wax for men

-Ideal for any body surface

-Molds perfectly

-Allows gripping of any hair

-Very low melting temperature (40-45 ° C).

How to use:

-Use disposable gloves.

-Pour the required amount of wax into the wax heater container.

-Heat the wax to a temperature of 40°- 45 ° C.

-For large areas, a large spatula is recommended.

-Stir the wax occasionally to check its consistency; the wax is ready for application when it reaches the consistency of melted honey.

-Apply a thin layer of wax to the desired area with a spatula in the direction of hair growth.

-Using the edge of the spatula, create a grip tab from the wax.

-Wait a few seconds for the wax to harden.

-Hold and stretch the skin in the opposite direction of removal.

-Remove the wax with quick movements, parallel to the skin.

-If necessary, repeat the procedure.

For a complete procedure and healthy skin, we recommend using pre- and post-depilation products.

Weight: 1000gr

ItalWax Strawberry Cartridge Wax 100ml

ItalWax Strawberry Cartridge Depilatory Wax 100 ml is specially designed to remove medium, thick, and short hair. This type of wax ensures perfect adhesion to the hair and is used with depilatory strips. It is a non-transparent wax, clearly visible on the skin, with a very pleasant strawberry scent. Applied in a thin layer, it efficiently removes all hairs from any area of the body. Due to its high adhesive strength, hairs are quickly trapped in the wax film, making epilation much faster and more efficient. It leaves the skin soft and smooth, without that unpleasant sticky sensation after use. For healthy skin and successful depilation, we recommend using ItalWax pre- and post-epilation products. ItalWax products are made from carefully selected ingredients and feature a wide range of professional products that cover all professional depilation needs. These products can be used in beauty salons as well as at home.

Features:

-Used with depilatory strips

-Single-use cartridge wax with a wide applicator

-Recommended for medium, thick, and short hair

-Ideal for any area of the body

-Suitable for all skin types

-Molds perfectly

-Very low melting temperature (37-39 ° C)

-Pleasant strawberry aroma

How to use:

-Use disposable gloves.

-Heat the wax in the wax heater to a temperature of 37-39 ° C.

-It is recommended to apply a thin layer

-The wax is ready for application when it reaches the consistency of melted honey.

-Apply the wax in a thin layer to the desired area using the built-in roller applicator.

-Apply the depilatory strip over the wax spread on the skin, leaving space to grip.

-Wait a few seconds for the wax to harden.

-Stretch and hold the skin taut in the opposite direction of the pull.

-Remove the depilatory strip with a sudden motion, parallel to the skin.

-If necessary, repeat the procedure.

For a complete procedure and healthy skin, we recommend using pre- and post-epilation products.

Weight: 100g

ItalWax White Chocolate Cartridge Wax 100ml

ItalWax White Chocolate 100 ml Cartridge Wax is specially formulated to remove medium, thick, coarse and short hair. This type of wax ensures perfect adhesion to the hair and is used with waxing strips. It is a non-transparent wax, clearly visible on the skin with a very pleasant white chocolate scent. Applied in a thin layer, it effectively removes all hair from any body surface. Due to its high adhesiveness, hair is quickly caught in the wax film, making epilation much faster and more efficient. It leaves the skin soft and smooth, without that unpleasant sticky sensation after use. For healthy skin and successful epilation, we recommend using pre- and post-epilation products from the ItalWax range. ItalWax products are made from carefully selected ingredients and offer a wide range of professional products that cover all professional epilation needs. These products can be used both in beauty salons and at home.

Features:

-To be used with waxing strips

-Disposable cartridge wax with a wide applicator

-Recommended for medium, thick, coarse and short hair

-Ideal for any area of the body

-Suitable for all skin types

-Molds perfectly

-Very low melting temperature (37-39 ° C)

-Pleasant white chocolate aroma

How to use:

-Use disposable gloves.

-Heat the wax in a wax heater to a temperature of 37-39 ° C.

-It is recommended to apply in a thin layer

-The wax is ready for application when it reaches the consistency of melted honey.

-Apply a thin layer of wax to the desired area using the built-in roller applicator

-Apply the waxing strip to the wax spread on the skin, leaving space to grip.

-Wait a few seconds for the wax to harden.

-Stretch and hold the skin in the opposite direction of removal.

-Remove the waxing strip with a sharp, swift motion, parallel to the skin.

-If necessary, repeat the procedure.

For a complete procedure and healthy skin, we recommend using pre- and post-epilation products.

Weight: 100Gr

ItalWax Oud Flex Cartridge Wax 100ml

ItalWax Oud Flex 100ml Oil-Soluble Depilatory Wax is part of the SPA line and is specially designed to remove medium to coarse and thick hair. This type of wax ensures perfect adhesion to the hair and is used with depilatory strips. It is a non-transparent wax, clearly visible on the skin with a very pleasant and relaxing scent. Applied in a thin layer, it efficiently removes all hair from any part of the body. Due to its high adhesiveness, hairs are quickly trapped in the wax film, making epilation much faster and more efficient. It leaves the skin smooth and soft, without that unpleasant sticky feeling after use. For healthy skin and successful epilation, we recommend using pre- and post-epilation products from the ItalWax range. ItalWax products are made from carefully selected ingredients and feature a wide range of professional products that cover all professional epilation needs. These products can be used both in beauty salons and at home.

Features:

-Used with depilatory strips

-Disposable cartridge wax with a wide applicator

-Recommended for medium to thick hair

-Ideal for any body area

-Suitable for all skin types

-Conforms perfectly

-Very low melting temperature (37-39°C)

-Very pleasant and relaxing scent

How to use:

-Use disposable gloves.

-Heat the wax in the wax heater to a temperature of 37-39°C.

-It is recommended to apply a thin layer.

-The wax is ready for application when it reaches the consistency of melted honey.

-Apply a thin layer of wax to the desired area using the built-in roller applicator.

-Apply the depilatory strip over the wax spread on the skin, leaving space to grip.

-Wait a few seconds for the wax to harden.

-Stretch and hold the skin taut in the opposite direction of removal.

-Remove the depilatory strip with a brisk motion, parallel to the skin.

-If necessary, repeat the procedure.

For a complete procedure and healthy skin, we recommend using pre- and post-epilation products.

Weight: 100g

ItalWax Plum Elastic Wax Beads 1000gr

This is an elastic wax in bead form that allows for easy hair removal in the armpit, bikini, and facial areas and is very effective in removing thick and very short hairs. It perfectly conforms to the contours of the area to be waxed, allowing it to grip very short hairs, even those 1mm long, and, when used correctly, can remove even very stubborn hair after shaving. It is recommended to apply a thin layer using a spatula. This is a medium-density wax containing titanium dioxide. It is characterized by a high level of flexibility that does not create elastic strands. It does not cause irritation or redness on the skin. It has a pleasant fruity aroma. Setting time: 6 - 7 seconds. ItalWax products are created from carefully selected ingredients and offer a wide range of professional products that cover all needs. These products can be used both in beauty salons and at home.

Features:

-Recommended for armpit, bikini, and facial areas

-Removes even very stubborn hair after shaving

-Perfectly conforms

-Allows gripping of any hair, even 1mm long

-Setting time 6-7 seconds

How to use:

-Use disposable gloves.

-Pour the necessary amount of wax into the wax heater container.

-Heat the wax to the appropriate temperature.

-For large areas, it is recommended to use a large spatula.

-Stir the wax occasionally to check consistency; the wax is ready for application when it reaches the consistency of melted honey.

-Apply a thin layer of wax to the desired area with a spatula in the direction of hair growth.

-Using the edge of the spatula, form a gripping tab with the wax.

-Wait a few seconds for the wax to harden.

-Stretch and hold the skin taut in the opposite direction of removal.

-Remove the wax with quick movements, parallel to the skin.

-If necessary, repeat the procedure.

For a complete procedure and healthy skin, we recommend using pre- and post-epilation products.

Weight: 1000Gr

Italwax Cosmetic Talc Powder 150 g is a fine, highly purified talc for preparing the skin before hair removal. Use it with pearl elastic wax, hot wax, and sugar paste. It contains no zinc oxide or starch.

What it does for you

• Keeps skin dry: the talc quickly absorbs moisture from the area.
• Wax adheres better, making hair removal more effective.
• No zinc oxide: Italwax says it does not irritate the skin.
• Does not clump on damp skin and is easy to remove without leaving a residue.
• Use it at any stage: before, during, and after hair removal.

How to use it at home

1. Cleanse the skin with a pre-hair removal lotion or foam and let it dry.
2. Apply a little talc to the area to be treated.
3. Spread it evenly with the palm of your hand.
4. Apply the wax or sugar paste.
5. If the skin starts to sweat during the process, apply a little more talc.

For what skin type and area

For the whole body. Italwax especially recommends it for delicate areas where the skin needs to be dried quickly during hair removal. If you sweat a lot, such as under the arms, the Help Line antiperspirant powder is specially designed for this.

Active ingredients

• Fine cosmetic talc: absorbs moisture and helps the wax grip the hair.

Specifications

What else you need

• Italwax Strong Sugar Paste 600 g
• Italwax Natural Pearl Elastic Wax
• Italwax Natural Hot Wax Cartridge
• Italwax Top Line Pre-Hair Removal Foam with Lime
• Italwax After-Hair Removal Oil with Lemon

ProBeauty Tip. When using sugar paste, talc is a lifesaver when the paste sticks. Dust a little around the stuck area, pull the paste over the talc, and remove it quickly.

The ETB Wax 100 ml Mono Wax Heater is a small device for a single 100 ml wax cartridge. It has its own applicator, so you heat the wax and apply it with the same device. It is suitable for hair removal at home, but also for salon use.

What it does for you

• The wax is ready in approximately 20 minutes, liquid and ready to apply.
• You heat and apply it with the same device, because it comes with its own applicator.
• It stands stably on the table, in the support that holds it in a vertical position.
• It takes up very little space: it has a small base and can be stored anywhere.
• You can take it with you on trips, because of its small size.

How to use it at home

1. Insert a 100 ml wax cartridge into the device.
2. Connect the cable to the outlet and place the device in the support, vertically.
3. Let the wax heat for approximately 20 minutes, until it becomes liquid.
4. Roll the wax on the skin in the direction of hair growth and remove it with hair removal strips.
5. At the end, unplug the device and let it cool down in the support.

For what type of work

It is the simple choice if you remove hair at home with a single roll-on wax. It works with 100 ml cartridges, such as ETB Wax pink, yellow, green, and blue waxes. If you want to change the wax often between areas, a Duo or Trio set will save you from changing cartridges. It is not for pearl wax, which melts in a container.

Specifications

What else you need

• 100 ml pink roll-on wax
• 100 ml yellow roll-on wax
• 100 ml green roll-on wax
• 90 m hair removal roll
• Post-hair removal cleansing oil with aloe vera

ProBeauty tip. Before the first pass, roll the applicator on a hair removal strip. See if the wax flows evenly before you put it on the skin and don't burn the first portion on the area to be removed.

ItalWax Honey Cartridge Wax 100ml

ItalWax 100 ml Honey Liposoluble Depilatory Wax is specially formulated to remove thin to medium and fine hair. This type of wax ensures perfect adhesion to the hair and is used with depilatory strips. It is clearly visible on the skin with a very subtle and pleasant honey scent. Applied in a thin layer, it effectively removes all hairs from any body surface. Due to its high adhesiveness, hairs are quickly caught in the wax film, making epilation much faster and more efficient. It leaves the skin smooth and soft, without that unpleasant sticky feeling after use. For healthy skin and successful epilation, we recommend using pre- and post-epilation products from the ItalWax range. ItalWax products are created from carefully selected ingredients and offer a wide range of professional products that cover all professional epilation needs. These products can be used both in beauty salons and at home.

Features:

- Used with depilatory strips

- Disposable cartridge wax with wide applicator

- Recommended for thin to medium and fine hair

- Ideal for any body area

- Suitable for all skin types

- Molds perfectly

- Very low melting temperature (37-39 ° C)

How to use:

- Use disposable gloves.

- Heat the wax in the wax heater to a temperature of 37-39 ° C.

- It is recommended to use in a thin layer

- The wax is ready for application when it reaches the consistency of melted honey.

- Apply a thin layer of wax to the desired area using the built-in roller applicator

- Apply the depilatory strip over the wax spread on the skin, leaving space to grip.

- Wait a few seconds for the wax to harden.

- Stretch and hold the skin taut in the opposite direction of removal.

- Remove the depilatory strip with a sudden movement, parallel to the skin.

- If necessary, repeat the procedure.

For a complete procedure and healthy skin, we recommend using pre- and post-epilation products.

Weight: 100g

ItalWax Natural Cartridge Wax 100ml

ItalWax Natural 100ml Oil-Soluble Depilatory Wax is specially formulated to remove thin to medium and fine hair. This type of wax ensures perfect adhesion to the hair and is used with depilatory strips. It is a wax clearly visible on the skin with a very subtle and neutral scent. Applied in a thin layer, it effectively removes all hair from any body surface. Due to its high adhesion, hairs are quickly caught in the wax film, making epilation much faster and more efficient. It leaves the skin smooth and velvety, without that unpleasant sticky sensation after use. For healthy skin and successful epilation, we recommend using pre- and post-epilation products from the ItalWax range. ItalWax products are created from carefully selected ingredients and with a wide range of professional products that cover all professional epilation needs. These products can be used both in beauty salons and at home.

Features:

-Used with depilatory strips

-Disposable cartridge wax with a wide applicator

-Recommended for thin to medium and fine hair

-Ideal for any body area

-Suitable for all skin types

-Perfectly molds to the skin

-Very low melting temperature (37-39°C)

How to use:

-Wear disposable gloves.

-Heat the wax in the wax heater to a temperature of 37-39°C.

-It is recommended to apply in a thin layer

-The wax is ready for application when it reaches the consistency of melted honey.

-Apply the wax in a thin layer to the desired area using the built-in roller applicator.

-Apply a depilatory strip over the wax spread on the skin, leaving space to grasp.

-Wait a few seconds for the wax to harden.

-Hold and stretch the skin in the opposite direction of the pull.

-Remove the depilatory strip with a quick motion, parallel to the skin.

-Repeat the procedure if necessary.

For a complete procedure and healthy skin, we recommend using pre- and post-epilation products.

Weight: 100g

🌿 Your post-depilation care ritual begins with ETB WAX Post Depilatory Cleansing Oil with Aloe Vera, a professional premium oil that gently cleanses, soothes, and intensely moisturizes sensitized skin. With a 100% vegan formula, this care oil is enriched with precious Aloe Vera and botanical oils that offer protection, regeneration, and softness from the first application.

💧 Its velvety texture effectively removes wax residues without leaving greasy marks. It is perfect even for sensitive skin, prone to redness or irritation, thanks to the soothing and anti-inflammatory properties of Aloe Vera.

✅ Key Benefits:

• Effectively and gently cleanses the depilated area
• Soothes irritated skin and reduces redness
• Hydrates and maintains the skin's natural barrier
• Light texture, with rapid absorption
• Ideal for salons and professional use
• Suitable for all skin types
• 100% vegan formula, free of animal-derived ingredients

🛠️ How to use:

1. Apply a small amount to a cotton pad

2. Gently wipe the depilated area with circular motions

3. Use immediately after depilation and for up to 48 hours for enhanced comfort

⚠️ Caution: For external use only. Do not apply to irritated, broken, or wounded skin. Avoid contact with eyes and mucous membranes. Avoid sun exposure and the use of alcohol or perfumed products for 24 hours after application.

💚 PRO Tip: Complete your post-depilation care routine with ETB WAX Cooling and Soothing Anti-inflammatory Gel – for perfectly balanced and protected skin!

ItalWax Azulen Cartridge Wax 100ml

Azulen Cartridge Depilatory Wax is an extremely elastic, slightly transparent liposoluble wax, made from a mixture of synthetic and natural resins, recommended for hair removal on any part of the body and used with depilatory strips. It was specially created for fine hairs and sensitive skin. Due to its high adhesion, hairs are quickly caught in the wax film, making depilation much faster and more efficient. It is a hypoallergenic wax that does not cause irritation or allergies, being specially created for sensitive skin. It leaves the skin soft and smooth, without that unpleasant sticky feeling after use. The azulene in its composition hydrates dry skin and prevents irritation, being a powerful antibacterial, anti-inflammatory, and soothing agent. For healthy skin and successful depilation, we recommend using pre- and post-depilation products from the ItalWax range. ItalWax products are created from carefully selected ingredients and offer a wide range of professional products that cover all the needs of professional depilation. These products can be used both in beauty salons and at home.

Features:

-Used with depilatory strips

-Disposable cartridge wax with a wide applicator

-Recommended for fine to medium hair

-Ideal for any area of the body

-Suitable for sensitive skin

-Molds perfectly

-Very low melting temperature (37-39 °C).

How to use:

-Use disposable gloves.

-Heat the wax in a wax heater to a temperature of 37-39 °C.

-It is recommended to apply a thin layer

-The wax is ready for application when it reaches the consistency of melted honey.

-Apply a thin layer of wax to the desired area using the built-in roller applicator

-Apply a depilatory strip over the wax spread on the skin, leaving room to grip.

-Wait a few seconds for the wax to harden.

-Pre-tension and hold the skin in the opposite direction of removal.

-Remove the depilatory strip with a brisk motion, parallel to the skin.

-If necessary, repeat the procedure.

For a complete procedure and healthy skin, we recommend using pre- and post-depilation products.

Weight: 100g

ItalWax Cartridge Wax Raspberry Flex 100ml

The hair removal wax, a blend of natural and synthetic wax, in a Raspberry Flex 100 ml cartridge from ItalWax, is designed for hair removal from any body area and for any hair type. This type of wax with raspberry essential oil ensures perfect adherence to the hair and is used with waxing strips. It is a pink, slightly transparent wax, clearly visible on the skin with a very pleasant fruity scent. Applied in a thin layer, it effectively removes all hairs from any body surface. Due to its high adhesion, hairs are quickly caught in the wax film, making waxing much faster and more efficient. It leaves the skin smooth and soft, without that unpleasant sticky feeling after use. For healthy skin and successful hair removal, we recommend using ItalWax pre- and post-epilation products. ItalWax products are made from carefully selected ingredients and offer a wide range of professional products that cover all the needs of professional hair removal. These products can be used both in beauty salons and at home.

Features:

-Used with waxing strips

-Single-use cartridge wax with wide applicator

-Recommended for all hair types, from fine to thick

-Ideal for any body area

-Suitable for all skin types

-Conforms perfectly

-Very low melting point (37-39°C)

-Very pleasant raspberry scent

How to use:

-Use disposable gloves.

-Heat the wax in the wax heater to a temperature of 37-39°C.

-It is recommended to apply in a thin layer

-The wax is ready for application when it reaches the consistency of melted honey.

-Apply a thin layer of wax to the desired area using the built-in roller applicator.

-Apply the waxing strip to the wax spread on the skin, leaving space to grip.

-Wait a few seconds for the wax to harden.

-Stretch and hold the skin taut in the opposite direction of the pull.

-Remove the waxing strip with a quick motion, parallel to the skin.

-Repeat the procedure if necessary.

For a complete procedure and healthy skin, we recommend using pre- and post-epilation products.

Weight: 100g

ItalWax Nirvana Lavender Elastic Pearl Wax

This is an elastic wax that allows hair removal for any skin and hair type, on any body area, even in hard-to-reach areas. It perfectly conforms to the contours of the area to be epilated, allows each hair to be gripped very close to the skin, and provides easy and very efficient hair removal. It is recommended to apply a thin layer with a spatula. The film wax does not break during the hair removal procedure. Film wax is an improved version of classic hot wax. Thanks to the addition of specific and innovative elements, this wax has established and advantageous properties: it has a much lower melting temperature (40-45 ° C). Nirvana Lavender Elastic Wax removes all hairs without irritating the skin, reducing the sensation of pain. For healthy skin and successful hair removal, we recommend using pre- and post-epilation products from the ItalWax range. ItalWax products are made from carefully selected ingredients and with a wide range of professional products that cover all needs. These products can be used both in beauty salons and at home.

Features:

-Recommended for any skin and hair type

-Ideal for any body area

-Conforms perfectly

-Allows gripping of any hair

-Very low melting temperature (40-45 ° C).

How to use:

-Use disposable gloves.

-Pour the required amount of wax into the wax heater container.

-Heat the wax to a temperature of 40°- 45 ° C.

-For large areas, it is recommended to use a large spatula.

-Stir the wax occasionally to check its consistency; the wax is ready for application when it reaches the consistency of melted honey.

-Apply a thin layer of wax to the desired area with a spatula in the direction of hair growth.

-Using the edge of the spatula, form a grip area with the wax.

-Wait a few seconds for the wax to harden.

-Stretch and hold the skin taut in the opposite direction of removal.

-Remove the wax with sharp movements, parallel to the skin.

-If necessary, repeat the procedure.

For a complete procedure and healthy skin, we recommend using pre- and post-epilation products.

Italwax Top Line Crystal Pearl Elastic Wax is a pearl-white synthetic wax from the Top Line range, designed for sensitive skin. Italwax describes it as the gentlest in the range and highly recommends it for the face. It is used at 38°C and can be removed without strips.

What it does for you

• Epilate the face and allergy-prone skin with a wax free from pine resin and fragrance.
• Low temperature: 38°C, so it does not overheat delicate skin.
• Grips very short hairs, from 1 mm, and coarse hairs, says Italwax.
• Does not break when removed, even when spread over a large area, because it is highly elastic.
• Also suitable for legs and arms, not just small areas.

How to use it at home

1. Heat the wax in the wax heater to 38°C.
2. Degrease the skin with a pre-epilation foam or lotion and apply a little talcum powder.
3. Spread the wax with a spatula in any direction towards you, leaving a border to grip.
4. Press the spatula firmly and steadily.
5. When it no longer sticks to the touch, stretch the skin and remove it quickly, parallel to the skin.
6. Soothe the skin with an oil-free post-epilation product.

For which skin type and area

For sensitive and allergy-prone skin: the face, underarms, and bikini area, and with large strips for legs or arms. The Italwax catalogue recommends it for experienced users. If you are just starting out, Coral, also from Top Line, is easier to work with.

Active ingredients

• Synthetic base, free from pine resin: Italwax makes Top Line wax from synthetic polymers (hydrogenated polycyclopentadiene), without the pine resin that can irritate allergy-prone skin.

Specifications

What else you need

• Wax heater with 800 ml container
• Wooden wax spatulas
• Italwax Top Line pre-epilation foam with lime
• Italwax talcum powder for pre-epilation
• Italwax post-epilation lotion with azulene

ProBeauty tip. Close the zip-lock bag tightly after each use. Italwax chose it to keep dust out of the pearls, and a facial wax must stay clean.

ItalWax Post-Epilation Oil with Menthol

This is a post-epilation oil with cleansing, moisturizing, and soothing/cooling effects, enriched with peppermint essential oil. Menthol reduces painful reactions, diminishes inflammation, and lowers local temperature. The post-epilation oil completes the depilation process, improving the skin's appearance after waxing. The Post-Epilation Oil with Menthol helps remove wax residues and eliminates the sticky sensation that can occur after waxing.

Features:

-Cleanses the skin of sticky wax residues after the procedure

-Cooling/fresh effect

-Moisturizes

-Soothes

-Carefully selected ingredients

How to use: Apply to waxed skin and gently massage into the skin to cleanse the waxed skin of sticky wax residues and soothe irritated skin.

ItalWax Oil-Free Lotion with Azulene After Depilation

This oil-free azulene lotion perfectly cleanses the skin after depilation, hydrating and soothing irritated skin. It has all the advantages of an oily product: it easily removes wax residues after depilation, absorbs immediately, but does not create an oily effect on the skin. It contains Azulene, an organic compound frequently used in the cosmetic industry.
The Oil-Free Lotion with Azulene after depilation was created for post-depilation application to effectively remove wax residues left on the skin. It also works against the sticky sensation that might appear after depilation. Because it absorbs quickly into the skin and does not have an oily texture, it is preferred by beauty salon clients. For healthy skin and successful depilation, we recommend using pre- and post-depilation products from the ItalWax range. ItalWax products are created from carefully selected ingredients and with a wide range of professional products that cover all needs. These products can be used both in beauty salons and at home.

Features:

-Post-depilation product

-Oil-free

-Hydrates

-Soothes

-Effectively cleans wax residues left after the depilation procedure

-Contains Azulene

-Does not leave skin oily

-Dries very quickly

How to use: Spray directly onto the already depilated skin area, then gently massage to remove any remaining wax. No rinsing required.

Weight: 100ml

ItalWax Aquamarine Flex Cartridge Wax 100ml

Aquamarine Cartridge Depilatory Wax is a light blue, extremely elastic, medium-density liposoluble wax, made from an innovative blend of synthetic and natural resins, recommended for waxing large areas (legs, arms, back) with waxing strips. After the wax solidifies, it forms a thin film on the skin, capturing all hairs and ensuring a firm grip on the depilatory strip. Aquamarine wax does not leave the skin sticky. It removes 100% of the hair without breaking it. The selected ingredients restore the nutritional and protein balance of the skin, providing optimal hydration during the waxing process, whether in the salon or at home. For healthy skin and successful waxing, we recommend using pre- and post-waxing products from the ItalWax range. ItalWax products are created from carefully selected ingredients and offer a wide range of professional products that cover all professional waxing needs. These products can be used both in beauty salons and at home.

Features:

-Used with waxing strips

-Disposable cartridge wax with a wide applicator

-Recommended for all hair types

-Ideal for large body areas

-Molds perfectly

-Very low melting point (37-39 ° C).

How to use:

-Use disposable gloves.

-Heat the wax in the wax heater to a temperature of 37-39 ° C.

-It is recommended to apply in a thin layer

-The wax is ready for application when it reaches the consistency of melted honey.

-Apply a thin layer of wax to the desired area using the built-in roll-on applicator.

-Apply the depilatory strip to the wax spread on the skin, leaving room to grip.

-Wait a few seconds for the wax to solidify.

-Stretch and hold the skin taut in the opposite direction of removal.

-Remove the waxing strip with a sharp motion, parallel to the skin.

-If necessary, repeat the procedure.

For a complete procedure and healthy skin, we recommend using pre- and post-waxing products.

Weight: 100Gr

Italwax Film Wax Elastic Wax White Chocolate Pearls 500 g is the medium-sized bag of white and creamy wax from the classic Italwax line. It melts in the heater, has a vanilla aroma reminiscent of white chocolate, and pulls off without leaving bands. It is a good format if you epilate a few areas at home without buying a kilogram.

What it does for you

• It gives you time to correct. Italwax describes it as having a longer setting time, suitable for less experienced hands.
• It does not pull out hairs when you pull it off, although it is very plastic.
• It removes short and coarse hairs from the armpits, groin area, and face.
• Creamy consistency, which spreads easily even on larger surfaces.
• You dose it easily. The pearls melt as much as you need, and you keep the rest in the bag.

How to use it at home

1. Put only the pearls you need in the heater and melt them at around 42 °C.
2. Degrease the skin with a pre-epilation foam or lotion and lightly powder with talc.
3. Spread a thin layer, regardless of the direction of the hairs, towards you, and leave a small "petal" to hold at the end.
4. When the wax is no longer sticky to the touch, hold the skin taut and pull quickly, parallel to the skin.
5. If hairs remain, reapply the wax over them and press the spatula more firmly.
6. Finally, soothe the skin with an oil-free post-epilation lotion.

For what type of skin and area

For the face, armpits, and groin area, on normal skin. It is one of the Italwax waxes recommended for those who are just starting, because it sets more slowly. For sensitive or allergic skin, Italwax has the Top Line, synthetic-based line.

Specifications

What else you need

• Wax heater with 800 ml container
• Wooden wax spatulas
• Protective paper for the heater
• Italwax talc powder, small format
• Italwax post-epilation lotion with azulene

ProBeauty tip. Keep the bag well closed and melt only the pearls you need each time. The rest stays in the bag for next time.

💙 Efficient, gentle, and fast hair removal for all skin types

Say goodbye to unwanted hair with ETB Wax Blue Wax with Azulene, the ideal choice for professional hair removal, right at home or in the salon! The azulene formula is specially designed to soothe sensitive skin, providing smooth results without irritation.

✔ Wide applicator for fast and even coverage
✔ Perfect texture for difficult areas
✔ Suitable for all skin types, including sensitive

✨ Key benefits:

• Effortless, long-lasting hair removal
• Azulene soothes and reduces redness
• Hygienic and precise application thanks to the wide roll-on
• Ideal for facial, body, armpit, or bikini line hair removal

🔧 How to use:

1. Insert the wax cartridge into the heater.

2. Allow approximately 20 minutes to reach the ideal temperature.

3. Apply the wax in the direction of hair growth.

4. Apply the waxing strip, press gently, then pull firmly and quickly in the opposite direction.

5. Finish with a post-epilation oil to soothe the skin.

📌 Choose ETB Wax for smooth, soft skin and uncompromising hair removal!

Italwax Film Wax Elastic Wax Pink Pearls 500 g is the red wax from the classic line, in a medium-sized bag. It melts in the heater, is spread thinly, and is pulled off like a film, without strips. Because it hardens more slowly, it is suitable if you are a beginner.

What it does for you

• It gives you time. Italwax describes it as having a fairly long hardening time, so you can apply it carefully.
• Removes thick and short hairs from the underarms and the classic bikini area.
• You work without strips: the wax lifts on its own, like an elastic strip.
• Thin layer, clean hair removal: it does not leave broken hairs when applied correctly.
• Medium format, good for home hair removal.

How to use it at home

1. Put the wax pearls you need in the heater and melt them at around 42 °C.
2. Cleanse the skin with a pre-hair removal foam and lightly powder with talc.
3. Spread the wax towards you, in a thin layer, and form a grip edge at the end.
4. Press the spatula firmly over the entire strip.
5. Wait until it no longer sticks to the touch, stretch the skin and pull off in one motion, parallel to the skin.
6. Finish with an oil-free soothing lotion.

For what skin type and area

For normal skin: underarms, classic bikini area, and face. If your skin gets red easily or reacts, choose a Top Line wax, synthetic-based. If you already have a steady hand and want speed, azulena hardens faster.

Specifications

What else you need

• Wax heater with 800 ml container
• Wooden wax spatulas
• Italwax talc powder, small format
• Italwax Top Line pre-hair removal foam with lime
• Italwax after-hair removal lotion with azulena

ProBeauty tip. On the underarm, spread the wax in a single application, as Italwax recommends. This way you pass over the sensitive skin there only once and finish faster.

🌿 Your post-depilation care ritual begins with ETB WAX Post Depilatory Cleansing Oil, a professional premium oil that gently cleanses, soothes, and intensely moisturizes sensitive skin. With a 100% vegan formula, this care oil is enriched with Argan Oil and precious botanical oils that provide protection, regeneration, and softness from the very first application.

💧 Its velvety texture effectively removes wax residues without leaving greasy traces. It is perfect even for sensitive skin, prone to redness or irritation, thanks to its soothing and anti-inflammatory properties.

✅ Key benefits:

• Effectively and gently cleanses the depilated area
• Soothes irritated skin and reduces redness
• Hydrates and maintains the skin's natural barrier
• Light texture, with rapid absorption
• Ideal for salons and professional use
• Suitable for all skin types
• 100% vegan formula, without animal-derived ingredients

🛠️ How to use:

1. Apply a small amount to a cotton pad

2. Gently wipe the depilated area with circular motions

3. Use immediately after depilation and for up to 48 hours for enhanced comfort

⚠️ Caution: For external use only. Do not apply to irritated, broken, or damaged skin. Avoid contact with eyes and mucous membranes. Avoid sun exposure and the use of alcohol or perfumed products for 24 hours after application.

💚 PRO Tip: Complete your post-depilation care routine with ETB WAX Cooling and Calming Anti-inflammatory Gel – for perfectly balanced and protected skin!

Italwax Top Line Orchid Elastic Wax Beads is a lilac synthetic wax with a delicate orchid fragrance, from the line for sensitive skin. When melted, it is transparent and has a gel consistency, so you can see the hairs through it. It is worked at 38 °C and is pulled off without bands.

What it does for you

• See every hair through the wax, because it is transparent when you spread it.
• Removes hair of any thickness and length, says Italwax.
• Gentle on thin skin: the manufacturer says it does not cause redness.
• Smells nice, like orchid, while you work.
• Sets matte, so you can easily see when it is ready to pull off.

How to use it at home

1. Heat the wax to 38 °C.
2. Degrease the area with a pre-epilation foam and apply a dusting of talc.
3. Spread the wax with a spatula, regardless of the direction of the hairs, towards you.
4. Look through the transparent layer: if you see uncovered hairs, press the spatula over them again.
5. When the wax becomes matte and no longer sticks, stretch the skin and pull it off quickly, parallel to it.
6. Finally, apply an after-epilation lotion.

For what skin type and area

The Italwax catalog recommends it for the underarms and bikini area, on sensitive or allergic skin. It is also used on the legs and arms. It is scented, so if your skin reacts to fragrances, choose a fragrance-free Top Line wax.

Active ingredients

• Synthetic base, without pine resin: Italwax makes Top Line wax from synthetic polymers (hydrogenated polycyclopentadiene), without the pine resin that can irritate allergic skin.

Specifications

What else you need

• Wax heater with 800 ml container
• Wooden wax spatulas
• Italwax Top Line pre-epilation foam with lime
• Italwax talc powder for before epilation
• Italwax after-epilation lotion with azulene

ProBeauty tip. Use the color change as a signal: as long as the wax is shiny, wait a little longer. When it becomes matte and no longer sticks to the touch, it is time to pull it off.

Italwax Top Line Elastic Wax Pearls Coral is an orange, creamy synthetic wax from the line for sensitive skin. It has a very strong grip on thick hair and hair grown back after shaving, so it is easy to work with even if you are just learning. It is used at 38°C, without strips.

What it does for you

• Grips thick and shaved hair thanks to its very strong adhesion, says Italwax.
• Easy to use, even if you are a beginner, because it is creamy and easy to apply.
• Good for the bikini area, where the hair is thickest.
• Gentle on the face: the manufacturer says it does not leave redness even on thin, fair skin.
• No pine resin and no fragrance, for sensitive skin.

How to use it at home

1. Heat the wax to 38°C.
2. Degrease the skin with a pre-epilation foam and powder with a little talc.
3. Spread the wax with a spatula in any direction towards you, and form a "petal" at the end.
4. Press the spatula down firmly so that the thick hair is completely enveloped in the wax.
5. When the wax is no longer sticky, stretch the skin and pull off quickly, parallel to the skin.
6. Apply an after-wax lotion at the end.

For what skin type and area

For sensitive or allergy-prone skin: the bikini area, underarms, face, and legs or arms. Italwax also recommends it for beginners. If you want something even gentler for the face and have a steady hand, check out Cristal.

Active ingredients

• Synthetic base, without pine resin: Italwax makes Top Line wax from synthetic polymers (hydrogenated polycyclopentadiene), without the pine resin that can irritate allergy-prone skin.

Specifications

What else you need

• Wax heater with 800 ml container
• Wooden wax spatulas
• Italwax Top Line Formula pre-epilation foam with lemon
• Italwax talc powder for before epilation
• Italwax after-wax lotion with azulene

ProBeauty tip. If you have shaved, wait a few days before epilating. Coral grips short hair grown back after shaving well, but it must protrude slightly from the skin for the wax to catch it.

ItalWax Cartridge Wax Rose Flex Oil 100ml

The hair removal wax, a blend of natural and synthetic wax in a 100ml Rose Flex Oil cartridge from ItalWax, enriched with rose oil, is designed for hair removal on any body area and for any hair type. This type of wax ensures perfect adhesion to the hair and is used with waxing strips. It is a light pink, non-transparent wax, clearly visible on the skin, with a very pleasant rose scent. Applied in a thin layer, it effectively removes all hairs from any body surface. Due to its high adhesion, hairs are quickly caught in the wax film, making waxing much faster and more efficient. It leaves the skin smooth and soft, without that unpleasant sticky feeling after use. For healthy skin and successful hair removal, we recommend using pre- and post-waxing products from the ItalWax range. ItalWax products are created from carefully selected ingredients and offer a wide range of professional products that cover all professional waxing needs. These products can be used both in beauty salons and at home.

Features:

-Used with waxing strips

-Disposable cartridge wax with wide applicator

-Recommended for all hair types, from fine to thick

-Ideal for any body area

-Suitable for all skin types

-Molds perfectly

-Very low melting temperature (37-39°C)

-Very pleasant and relaxing rose scent

How to use:

-Use disposable gloves.

-Heat the wax in the wax heater to a temperature of 37-39°C.

-It is recommended to apply in a thin layer

-The wax is ready for application when it reaches the consistency of melted honey.

-Apply the wax in a thin layer to the desired area using the built-in roller applicator.

-Apply the waxing strip onto the wax spread on the skin, leaving space to grip.

-Wait a few seconds for the wax to harden.

-Stretch and secure the skin in the opposite direction of the pull.

-Remove the waxing strip with a quick, abrupt movement, parallel to the skin.

-If necessary, repeat the procedure.

For a complete procedure and healthy skin, we recommend using pre- and post-waxing products.

Weight: 100g

Italwax Film Wax Elastic Wax Natural Beads 500 g is a transparent wax from the classic line, in a medium-sized bag. It has a gentle formula, follows the contours of the body, and catches short hairs. You spread it with a spatula and pull it off without strips.

What it does for you

• Catches short hairs and on uneven surfaces, according to Italwax's description.
• Comfort on delicate areas, because it feels slightly warm during application.
• See the hairs through the wax, being transparent.
• Does not leave broken hairs when pulled off correctly, in a single layer.
• Suitable quantity for home hair removal, without having to keep a large bag open.

How to use it at home

1. Melt the beads you need in the wax heater, at around 42 °C.
2. Cleanse the area with a pre-hair removal foam, wipe it dry, and lightly powder with talc.
3. Apply a thin layer, towards you, and leave a small "petal" at the end to grip.
4. Press the spatula firmly, so that all the hairs enter the wax.
5. When it no longer sticks to the touch, stretch the skin and pull quickly, parallel to it.
6. Finally, apply an oil-free soothing lotion.

For what skin type and area

For the face, underarms, and bikini area, on normal skin, according to the Italwax catalog. Italwax says that it feels very slightly warm on the skin. For allergic or reactive skin, choose the Top Line range, which is synthetic-based.

Specifications

What else you need

• Wax heater with 800 ml container
• Wooden wax spatulas
• Italwax talc powder, small size
• Italwax Top Line pre-hair removal foam with lime
• Italwax after-hair removal lotion with azulene

ProBeauty tip. Work on the bikini area with small strips. You can hold onto short hairs more easily with the skin stretched when you pull them off.

ItalWax Coconut Cartridge Wax 100ml

ItalWax 100ml Coconut Oil Soluble Depilatory Wax is specially designed to remove medium to thick and short hair. This type of wax ensures perfect adhesion to the hair and is used with depilatory strips. It is an opaque wax, clearly visible on the skin, with a very pleasant coconut scent. Applied in a thin layer, it effectively removes all hairs from any body surface. Due to its high adhesiveness, hairs are quickly trapped in the wax film, making depilation much faster and more efficient. It leaves the skin soft and smooth, without that unpleasant sticky sensation after use. For healthy skin and successful depilation, we recommend using pre- and post-depilation products from the ItalWax range. ItalWax products are made from carefully selected ingredients and offer a wide range of professional products that cover all needs for professional depilation. These products can be used both in beauty salons and at home.

Features:

-Used with depilatory strips

-Disposable cartridge wax with wide applicator

-Recommended for thin to medium and fine hair

-Ideal for any body area

-Suitable for all skin types

-Molds perfectly

-Very low melting temperature (37-39 ° C)

-Very pleasant coconut scent

How to use:

-Use disposable gloves.

-Heat the wax in the wax heater to a temperature of 37-39 ° C.

-It is recommended to apply in a thin layer

-The wax is ready for application when it reaches the consistency of melted honey.

-Apply the wax in a thin layer to the desired area using the built-in roller applicator

-Apply the depilatory strip over the wax spread on the skin, leaving space to grip.

-Wait a few seconds for the wax to harden.

-Tension and hold the skin in the opposite direction of the pull.

-Remove the depilatory strip with a quick movement, parallel to the skin.

-If necessary, repeat the procedure.

For a complete procedure and healthy skin, we recommend using pre- and post-depilation products.

Weight: 100Gr

ItalWax Rose Cartridge Wax 100ml

ItalWax Rose 100ml Liposoluble Cartridge Wax is specially formulated to remove medium to thick and short hair. This type of wax ensures perfect adhesion to the hair and is used with depilatory strips. It is a non-transparent wax, clearly visible on the skin, with a very pleasant rose scent. Applied in a thin layer, it efficiently removes all hairs from any area of the body. Due to its high adhesiveness, hairs are quickly caught in the wax film, making depilation much faster and more efficient. It leaves the skin smooth and soft, without that unpleasant sticky sensation after use. For healthy skin and successful depilation, we recommend using pre- and post-epilation products from the ItalWax range. ItalWax products are made from carefully selected ingredients and offer a wide range of professional products that cover all professional depilation needs. These products can be used both in beauty salons and at home.

Features:

-Used with depilatory strips

-Disposable cartridge wax with wide applicator

-Recommended for medium and short hair

-Ideal for any body area

-Suitable for all skin types, including sensitive

-Molds perfectly

-Very low melting temperature (37-39 ° C)

-Very pleasant rose scent

How to use:

-Use disposable gloves.

-Heat the wax in the wax warmer to a temperature of 37-39 ° C.

-It is recommended to apply in a thin layer

-The wax is ready for application when it reaches the consistency of melted honey.

-Apply the wax in a thin layer to the desired area using the built-in roller applicator.

-Apply the depilatory strip over the wax spread on the skin, leaving space to grip.

-Wait a few seconds for the wax to harden.

-Stretch and hold the skin taut in the opposite direction of removal.

-Remove the depilatory strip with a sudden movement, parallel to the skin.

-Repeat the procedure if necessary.

For a complete procedure and healthy skin, we recommend using pre- and post-epilation products.

Weight: 100g