Knives and sharpeners

The BaByliss PRO FoilFX02 GoldFX FXRF2GE is the replacement set for the FoilFX02 GoldFX double foil shaver: a double foil shaving head and 2 single blades. Install it when you want the shaver to once again shave very close to the skin, on the neck, face, and hairline. It is a replacement part, not a shaver, so you need the FoilFX02 to use it.

What it does for you

• Replace everything at once: the foil head and both blades, exactly as the FoilFX02 manual requires.
• Shave very close to the skin on the neck, face, and around the entire hairline.
• The same 44 mm shaving area, so you work just as quickly as before.
• Snap-on installation: the blades and head each click into place.
• You can change the color of the head: the brand says that the chameleon, gold, chrome, and gunsteel finishes can be combined to your liking.

How to use it at home

1. Turn off the shaver. Press the release button on the side and pull the shaving head up and off the body of the shaver.
2. Remove the old blades one by one: grasp each blade by its two heads and pull it gently upwards.
3. Insert the new blades, one at a time. Align the blade guide with the guide rail and press gently until you hear a click.
4. Place the new head over the blades and press gently until it clicks into place. Be careful not to bend the foil or blades.
5. Turn on the shaver and check that it works correctly before the first shave.

For what type of shaver

The set is made for the FoilFX02 GoldFX shaver. The BaByliss PRO page says it can be used on any BaByliss PRO double foil shaver, so it also works on the FoilFX02 metal, GunsteelFX, or ChameleonFX. For single foil shavers, for the UVFOIL02, FXONE, and FX3, the brand has separate sets.

Specifications

What else you need

• BaByliss PRO FoilFX02 Gold shaver, for which the set is made
• BaByliss PRO FoilFX02 metal shaver, with double foil
• BaByliss PRO 4-in-1 spray for shaver maintenance
• Wahl oil for lubricating the blades
• Wahl Blade Ice spray for cleaning the blades

ProBeauty tip. Clean the blades with the brush after every shave and lubricate them regularly with a few drops of oil. The FoilFX02 manual clearly states that without cleaning and lubrication, the shaver will not work correctly.

The Wahl Premium Set of 3 short guards gives you the three short lengths you need for a fade: 1.5, 3, and 4.5 mm. They are part of the Wahl Premium guard line and attach to the blade with metal clips. You can use them with Wahl clippers such as the Magic Clip, Legend, or Super Taper.

What they do for you

• Create short, gradual transitions: 1.5, 3, and 4.5 mm, with small steps between them.
• The guard won't pop off the blade: the metal Secure-fit clips hold it more securely and prevent it from coming loose during cutting.
• They withstand daily use longer: Wahl says the material is 70% more durable than standard guards.
• Move them from one clipper to another: the brand makes them compatible with 8 Wahl models, from the Super Taper to the Balding.

How to use them at home

1. Turn off the clipper and brush the hair off the blade.
2. Choose the length. If you're not sure, start with 4.5 mm: you can always cut it shorter, but you can't make it longer again.
3. Place the guard on the blade and press until the clip snaps into place, then check that it's secure.
4. Cut against the direction of hair growth, using even strokes without pressing on the scalp.
5. Finally, clean the guards with a small brush and keep them dry and stored in a safe place.

For what type of clipper

Wahl makes them compatible with the Super Taper, Super Taper Cordless, Legend, Legend Cordless, Senior Cordless, Magic Clip, Magic Clip Cordless, and Balding. They are for the short areas of the fade, the neckline, the sides, and around the ears. They do not cover longer lengths: for over 4.5 mm, you need a set with larger numbers. They are not for outline clippers.

Specifications

What else you need

• Wahl Magic Clip Cordless Clipper
• Wahl Legend Clipper
• Wahl Balding Clipper
• Complete Wahl Premium Guard Set
• Wahl Clipper Blade Oil

ProBeauty Tip. For a clean fade, work from the bottom up: 1.5 mm at the base, 3 mm in the middle, and 4.5 mm toward the top. Each pass starts slightly lower than the previous one ended, so the line between the areas blends out.

The Wahl Premium 10-Piece Guard Set is the Premium Cutting Guides set, with 10 guards from 1.5 to 25 mm, delivered in a storage bag. It is the complete set for those who cut their hair often at home: you have all the transitions for a fade, from the neck to the top. They attach to large Wahl clippers, such as Magic Clip, Legend, or Super Taper.

What it does for you

• You have all the lengths in a single set: 1.5, 3, 4.5, 6, 10, 13, 16, 19, 22, and 25 mm.
• The guard stays firmly on the blade: Secure Fit technology keeps it attached to the blade for a long time.
• Cutting is gentler on the skin: the contact surface and teeth are rounded.
• It retains its shape: the glass-fiber and mineral-reinforced plastic is durable and dimensionally stable.
• You keep them in one place, in the bag included in the set, so they don't get lost or scratched.

How to use them at home

1. Turn off the clipper and remove the hair from the blade.
2. Choose the length. If you are unsure, start with a longer guard and gradually go down.
3. Place the guard on the blade and press until it locks. Check that it is firmly attached before turning it on.
4. Cut against the direction of hair growth, using even strokes.
5. For a fade, change the guard one step at a time, from the bottom up.
6. After cutting, shake the guards, clean them with a brush, and put them back in the bag.

For what type of device

Wahl makes them compatible with Super Taper, Super Taper Cordless, Legend, Legend Cordless, Senior Cordless, Magic Clip, Magic Clip Cordless, and Balding. They are for clipper haircuts, from fades to longer haircuts. They are not for outline trimmers or for machines with slide-on blades, such as Kuno or ChromStyle.

Specifications

What else you need

• Wahl Magic Clip Cordless Clipper
• Wahl Legend Cordless Clipper
• Wahl Super Taper Clipper
• Wahl Premium Set with Short Guards
• Wahl Clipper Blade Oil
• Wahl Fade Brush

ProBeauty Tip. Arrange the guards on the table in order, from shortest to longest, before you start. For a fade, you change them often, so you won't have to search for the right length with the clipper in your hand.

Wahl 5 Star Finale Foil and Blades 07043 is the replacement set for the Wahl Finale shaver: gold foil and blade assembly, in a single package. With it, the shaver shaves like new again. Wahl makes it exclusively for Finale.

What it does for you

• Shave without bumps, with hypoallergenic gold foil.
• Shaves very short: the ultra-thin foil allows a cutting length of 0.1 mm.
• Press very lightly: only light pressure is needed for a close shave.
• Shaver like new, because you replace the foil and blade assembly at the same time.
• Quick installation, with the detachable foil head.

How to use it at home

1. Turn off the shaver. Press the round button on the right and lift the flexible foil head.
2. Gently press the blade assembly and turn it 90 degrees. It comes out on its own.
3. Put in the new assembly, following the steps in reverse, then attach the new foil head.
4. Every 2–3 days, lightly lubricate the blades, dabbing them with a sponge soaked in oil.
5. After each use, put the protective cap over the foil.

For what type of shaver

It is the original part for the Wahl 5 Star Finale shaver. It does not fit the Vanish, Super Close, or Mobile Shaver, which have separate sets. If you only need the foil, Wahl also sells it separately, with code 07043-100.

Specifications

What else you need

• Wahl oil for lubricating the blades
• Wahl Blade Ice spray for shaver blades
• Another shaver from the 5 Star series: Wahl Vanish

ProBeauty tip. The sign that the set is worn out is simple: the shaver runs slower and the foil heats up. Then change the foil and blades together, not just the foil.

BaByliss PRO SkeletonFX FX707ZE is the replacement blade for SkeletonFX FX7870 trimmers. It features a 40 mm T-blade with 1.6 mm standard teeth for clean lines on any hair texture. You can install it with a screwdriver in just a few minutes when the old blade no longer cuts cleanly.

What it does for you

• Cleanly trims lines, details, and shapes thanks to the 40 mm T-blade designed for precision work.
• Adjusts to a zero-gap setting, so you can work very close to the skin.
• Combines two materials: the fixed blade is made of titanium, while the moving cutting blade has a DLC coating.
• Works on any hair texture and skin sensitivity, according to the brand, thanks to the standard teeth.
• Fits multiple devices: FX797E, all FX7870 and FX726 models, plus 2-hole blade systems.

How to use it at home

1. Turn off the device and unplug it.
2. Turn it upside down with the blade teeth facing down and place it on a flat surface.
3. Loosen the mounting screws with a screwdriver and remove the old blade set.
4. Place the new set on the head, aligning the pivot pin with the moving blade.
5. Put the screws back in place, tighten them lightly, turn the device over, and align the blades parallel to the housing. Only then tighten them completely.
6. Apply a few drops of lubricating oil before turning on the device.

For what type of device

It fits SkeletonFX FX7870 trimmers, including the GunSteel, Gold, and Boost+ versions, as well as the SnapFX FX797E and LO-PROFX FX726. The brand says it also works with other devices featuring a 2-hole blade system. It is not for FX8700 clippers, which use 45 mm blades.

Specifications

What else you need

• BaByliss PRO 4-in-1 Blade Care Spray
• Wahl Blade Oil, 100 ml
• BaByliss PRO SkeletonFX GunSteel FX7870GSE Trimmer
• BaByliss PRO SkeletonFX Gold FX7870GE Trimmer
• Wahl Blade Ice Spray for cooling and cleaning blades

ProBeauty tip. After installation, turn on the device for a few seconds and look at the blade from the side. If the moving blade extends beyond the fixed blade, loosen the screws and realign it before it touches the skin.

Enjoy the Perfect Shave with the Wahl Blades + Foil Set for Vanish Shaver

The Wahl Blades + Foil Set for Vanish Shaver is the ideal solution for a precise and comfortable shave. The foil is made from the highest quality hypoallergenic gold foil, ensuring a gentle and irritation-free experience. With an ultra-thin thickness, it allows for a cutting length of 0.1 mm, so you can achieve an extremely close shave without leaving bumps.

Key Features:

• Hypoallergenic Gold Foil: Made from the highest quality gold foil for a gentle and irritation-free shave.
• Very Small Cutting Length: The ultra-fine foil allows for a cutting length of only 0.1 mm, for a precise and uniform result.
• Easy to Use and Maintain: Requires only light pressure for a consistent shave. It is easy to change for regular cleaning and maintenance.

Opt for comfort and precision in every shave with the Wahl Blades + Foil Set for Vanish Shaver. Discover an irritation-free experience and an impeccable result!

The Wahl Cordless Magic Clip Staggertooth blade is the replacement blade for the Wahl Cordless Magic Clip clipper. It has alternating short and long teeth on the top blade, designed for fades without visible lines. You can replace it yourself with a screwdriver when the old blade no longer cuts cleanly.

What it does for you

• Fades without lines: alternating short and long teeth blend the transition between lengths.
• Good angle for fades: Wahl designed the lower blade like a surgical blade for the optimal fading angle.
• Cuts very short: cutting length ranges from 0.5 to 1.2 mm.
• Works close to the skin: the blade can be adjusted to zero overlap.
• Firmer cut: Wahl UK says the staggered teeth provide a more substantial cut and a uniform blend.

How to use it at home

1. Turn off the clipper and remove it from the power outlet or charging stand.
2. Unscrew the screws on the old blade and remove it.
3. Place the new blade on the head, with the adjustment lever caught in the moving blade.
4. Put the screws back in place and tighten them just enough so you can still move the blade.
5. Align the blades: the moving blade must not protrude in front of the fixed blade. Only then tighten the screws completely.
6. Put a few drops of oil on the teeth and turn on the clipper for a few seconds.

For what type of device

This is the Cordless Magic Clip blade, according to Wahl Europe and Wahl UK. It is good for gradual fades, down to almost the skin, and for blending. It is not for the Magic Clip corded, Super Taper, or Senior. Wahl has other blades for those.

Specifications

What else you need

• Wahl Cordless Magic Clip Clipper
• Wahl Cordless Magic Clip Black Clipper
• Gold Staggertooth Blade with Titanium Coating and DLC
• Wahl Oil for Lubricating Blades
• Wahl Blade Ice Spray that Cools and Cleans Blades

ProBeauty Tip. When fading, start with the blade slightly retracted, not directly at zero. Gradually bring the blades closer, only over the shortest area. The skin stays calmer, and the transition looks cleaner.

BaByliss PRO SkeletonFX 35078700 is a replacement blade sold for SkeletonFX FX7870 foil shavers. Code 35078700 is a spare part code, and the brand does not publish a separate data sheet for it. Therefore, check your device model before ordering.

What it does for you

• It brings back a clean cut when the old blade no longer catches the hair on the first pass or pulls the hair.
• It saves you a service visit: on the SkeletonFX, the blade set is attached with screws and you can replace it yourself.
• It keeps your device working: you only replace the worn blade, not the entire foil shaver.
• It is easy to maintain: the brand recommends a few drops of lubricating oil before each use.

How to use it at home

1. Turn off the device and unplug it.
2. Turn it upside down with the blade teeth facing down and place it on a flat surface.
3. Loosen the mounting screws with a screwdriver and remove the old blade set.
4. Place the new set on the head, with the foil axis aligned in the moving blade.
5. Put the screws back in place, tighten them slightly, align the blades parallel to the housing, and only then tighten them completely.
6. Put a few drops of oil on before turning on the device.

For what type of device

It is sold for SkeletonFX FX7870 foil shavers. I did not find a BaByliss PRO source linking code 35078700 to other models. If you have a SnapFX, LO-PROFX, or another device, choose a blade with brand-published compatibility, such as FX707ZE, which covers the entire FX7870 series, plus FX797E and FX726.

What else you need

• SkeletonFX FX707ZE blade, with brand-published compatibility
• BaByliss PRO 4-in-1 spray for blade maintenance
• Wahl oil for blade lubrication, 100 ml
• Wahl Blade Ice spray for cooling and cleaning blades

ProBeauty tip. Before ordering, look at the label under the device: if it says FX7870, you are on the right series. Keep the old blade until you check that the new one cuts cleanly.

Experience Power and Precision with the Wahl Magic Clip Gold Cordless Blade Set

The Wahl Magic Clip Gold Cordless blade set is the perfect choice for precise and detailed hairstyles. The Titanium blade offers top-tier durability and performance with every use. The 40mm blade width and adjustable cutting length between 0.8mm and 2.5mm ensure flexibility in creating various hairstyling looks.

Key Features:

• High-Quality Material: The Titanium blade guarantees durability and resistance over time.
• Adjustable Length: You can adjust the cutting length between 0.8mm and 2.5mm to achieve precise and varied cuts.
• Perfect Compatibility: Suitable for use with the Wahl Cordless Magic Clip Gold, ensuring seamless integration and optimal performance.
• Included Accessories: Along with the blade set, you also receive screws for fastening, oil for maintenance, and detailed instructions to keep the blade in optimal condition.

Discover the versatility and power of the Wahl Magic Clip Gold Cordless Blade Set for the best hairstyling results!

Restore your shaver's maximum performance with the complete BabylissPro FXLRF2 replacement kit, exclusively compatible with the Double FoilFX02 UV model. Made in the USA, this professional set is ideal for periodic maintenance, offering a precise, comfortable, and safe shave.

🔧 Kit contents:

• Titanium foil – for a smooth, irritation-free shave
• Ultra-efficient cutting blade – durable and powerful
• FXLRF2 compatible replacement head – perfectly adapted to the device

✅ Compatibility:

• Only with BabylissPro Double FoilFX02 UV (FXLRF2)
• Not compatible with other models or single foils

💎 Key advantages:

• Like-new performance with every use
• Quick and easy assembly, no special tools required
• Precise shave, without pulling or irritation
• Resistance and durability during intensive use
• Recommended for salons and professional use

🛠️ Quick usage instructions:

1. Press the side button to remove the old foil
2. Carefully install the new foil
3. Add a few drops of oil for maintenance
4. Test the device before use

🧼 Recommended maintenance:

• Clean the foil and blade with a special brush or professional spray
• Do not wash with water
• Allow the device to cool completely before storage

💡 Ideal for professionals who demand precision, hygiene, and maximum reliability every day.

Personalize Your Cuts with the Wahl Balding Clipper Guide Comb Set

The set of 2 Wahl Professional intermediate guide combs is the perfect choice for adjusting and personalizing cuts with your Wahl clippers. Made from high-quality hard plastic, these guide combs are durable and deliver consistent performance with every use.

Key Features:

• Durable Material: Constructed from high-quality hard plastic for durability and long-lasting resistance.
• Universal Compatibility: The set includes 2 guide combs with widths of 1.5mm and 4.5mm, perfect for all professional Wahl clippers.
• Ideal for Precise Cuts: Specifically designed to provide precise and uniform lengths in hairstyling.
• Easy to Use and Maintain: Simple to attach and clean for a hassle-free grooming experience.

Enhance the performance of your Wahl clippers with the Balding Clipper Guide Comb Set. Ensure every cut is precise and your hairstyle impeccable!

BaByliss PRO SkeletonFX FX707BD2E is a 40 mm T-blade replacement blade with 2 mm deep teeth and a black DLC coating. Use it with SkeletonFX FX7870, SnapFX FX797E, and LO-PROFX FX726 trimmers. It is designed for clean lines and detailing on thick hair.

What it does for you

• Creates clean outlines and sharp lines thanks to its 2 mm deep teeth.
• Cuts through thick or coarse hair where fine-tooth blades can easily clog.
• Glides more easily: the DLC (Diamond Like Carbon) coating is wear-resistant and reduces friction.
• Adjusts to zero-gap for trimming very close to the skin.
• Fits multiple devices: FX797E, all FX7870 and FX726 models, plus 2-hole blade systems.

How to use it at home

1. Turn off the trimmer.
2. Remove the old blade with a screwdriver.
3. Place the new blade on the trimmer and make sure it is correctly positioned, parallel to the housing.
4. Tighten the screws and turn on the trimmer for a few seconds to ensure the blade runs smoothly.
5. Clean and lubricate the blade regularly, before and during use, with BaByliss PRO 4-in-1 spray, as recommended by the brand.

For which type of device

It fits SkeletonFX FX7870, SnapFX FX797E, and LO-PROFX FX726 trimmers, plus other devices with a 2-hole blade system. The brand recommends it for thick or coarse hair and less sensitive skin. If you frequently work on sensitive skin, a blade with standard 1.6 mm teeth, such as the FX707ZE, is more suitable.

Specifications

What else you need

• BaByliss PRO Boost+ SkeletonFX Gold FX7870GBPE Trimmer
• BaByliss PRO SkeletonFX GunSteel FX7870GSE Trimmer
• BaByliss PRO 4-in-1 Blade Care Spray
• Wahl Blade Lubricating Oil, 100 ml

ProBeauty tip. Use this blade for outlining and detailing, and on areas with thin skin, such as the neck, work with short strokes and without applying pressure.

Wahl Super Close Foil and Blade 3616-7000 is the replacement set for the Wahl Super Close shaver: a new foil and blade. With it, the shaver shaves precisely again, without having to buy another shaver. It is made only for Super Close.

What it does for you

• Precise shaving returns, with new, original Wahl foil and blade.
• The shaver no longer pulls hairs: the manual says this happens when the foil and blade are worn.
• Shave at 0.05 mm, with the same fine foil that comes with the shaver.
• Your skin is safe: a damaged foil can injure the skin, and the new set replaces it.
• It can be installed at home, without tools, in a few steps.

How to use it at home

1. Turn off the shaver and remove the protective cap.
2. Remove the foil shaving head and pull the old foil out of it.
3. Hold the new foil only by the edges. You can curve it, but do not bend it. Push it into the head until it stops.
4. Grip the old blade from the side and carefully remove it from the holder. Press the new blade onto the holder and check that the spring has remained in place.
5. Put the shaving head back in place until it locks, then the cap.

For what type of shaver

It is the original part for the Wahl Super Close shaver, with a 0.05 mm foil and a cutting width of 45 mm. It does not fit the Mobile Shaver or the Vanish, which have separate sets.

Specifications

What else you need

• The Wahl Super Close shaver, for which the set is made
• Wahl Fade Brush, for the hairs left after shaving
• Wahl Detailer Li Trimmer, for shortening the hair before shaving

ProBeauty Tip. Do not rush the replacement: first clean the shaving head thoroughly. If it still shaves poorly or pulls hairs, it is time for the new set.

Restore your shaver's maximum performance with the BabylissPRO FXONE Black Professional Set, specially designed for the FX79FS2MBE model from the FXONE range. This complete kit includes a replacement head, blade, and double foil, providing ultra-precise cutting and a perfectly smooth shave.

✔ What the set includes:

• Complete replacement head – 100% metal construction for high durability
• Ultra-thin double foil – for a comfortable and efficient shave
• Ultra-efficient blade – ensures a clean cut, without pulling or irritation

🔧 Compatibility:
✅ Exclusively for BaBylissPRO FXONE Black FX79FS2MBE
❌ Not compatible with other FX range models or single-foil shavers

✨ Key advantages:

• Precise, fast, and effortless shaving
• Simple and quick installation, ideal for professional maintenance
• Elegant, black design, perfect for a modern salon look
• Superior quality – long-lasting durability and performance

💡 Maintenance tip:
Periodically clean the cutting head and foil. Replace them whenever you notice a drop in performance to maintain maximum efficiency.

🔧 BabylissPRO FXONE Black – The professional's choice for an uncompromising shave!

The MAGIC BLADE Standard blade set is made of the highest quality stainless steel, performing extremely well thanks to precise grinding technology. The blade has an adjustable cutting height between 0.7 and 3 mm, with a blade width of 46 mm and a cutting width of 40 mm. The tooth width of the upper blade is 1.3 mm, and the lower blade is 1.6 mm. The blade set is easily interchangeable and allows for quick cleaning and changing to available options.

The set is compatible with the following devices:

1854/1855/1870/1871/1872/1873/1874/1876/1877/1884/1885/1886/1887/1888/8843L.

The package contains: 1 cutting head

Restore the maximum performance of your professional shaver with the BabylissPRO FXONE Double Gold Kit – replacement head, blade, and foil compatible with the BPFX79FS2GE model from the FXONE range. Specially designed for high-precision results and durability in professional use.

✔ What the kit contains:

• Complete golden metal replacement head
• Ultra-thin double foil for a smooth and comfortable shave
• Ultra-efficient cutting blade for uniform and fast results

📏 Product dimensions:

• Width: 8.5 cm
• Height: 18 cm
• Length: 4.5 cm
• Weight: 44 g

✨ Key advantages:

• Perfect compatibility with the BabylissPRO FXONE BPFX79FS2GE model
• Elegant gold, 100% metallic design – ideal for premium salons
• Easy to install – quick, hassle-free replacement
• Ensures a smooth shave, without irritation or pulling
• Professional quality for an extended lifespan

💡 Recommendation:
Clean the device regularly and replace the head whenever you notice a drop in performance to maintain professional standards.

🔧 BabylissPRO FXONE Gold – Precision, elegance, and reliability in every detail!

The BaByliss PRO FoilFX02 ChameleonFX FXRF2CE is a replacement head with a ChameleonFX finish for the ChameleonFX double foil shaver. The box contains the double foil shaving head and 2 single blades. With it, the shaver once again shaves very close to the skin on the neck, face, and contours.

What it does for you

• Shaves very close to the skin on the neck, face, and around the hairline.
• All the cutting parts in one package: double foil head and 2 blades.
• 44 mm shaving area, just like the original head.
• ChameleonFX finish, which you can also put on any other BaByliss PRO double foil shaver if you want a different color.
• Push-button mounting: the blades and head snap into place.

How to use it at home

1. Turn off the shaver and press the side button to release the head. Pull it gently upwards.
2. Remove the old blades one by one, pulling them gently upwards from the heads.
3. Align each new blade with the guide rail and press until you hear a click.
4. Place the new head over the blades and press gently until it snaps into place. Do not bend the foil.
5. Turn on the shaver and check that it works correctly.

For which type of shaver

The set is made for the ChameleonFX double foil shaver from the FoilFX02 family. The brand states that it works with any BaByliss PRO double foil shaver. It is not for UVFOIL02, FXONE, FX3, or single foil shavers.

Specifications

What else you need

• The BaByliss PRO ChameleonFX double foil shaver, which the set is made for
• BaByliss PRO 4-in-1 spray for shaver maintenance
• Wahl oil for lubricating the blades
• Wahl Blade Ice spray for cleaning the blades

ProBeauty tip. If you already have a metal or Gold FoilFX02, you can use the ChameleonFX set to change its appearance along with the parts. You get new blades and a new color in one go.

The BaByliss PRO SkeletonFX FX707C2ZE is a 40 mm titanium-coated T-blade with 2 mm deep teeth. The brand presents it as the ChameleonFX version of the Titanium 2.0 blade. You use it on the SkeletonFX FX7870, SnapFX FX797E, and LO-PROFX FX726 trimmers.

What it does for you

• Stays sharp longer: titanium is a hard and durable coating, says the brand.
• Creates clean contours and smooth lines, thanks to the 2 mm deep teeth.
• Cuts well through thick or coarse hair, where you work on details and edges.
• Adjusts to zero-gap, for trimming very close to the skin.
• Fits multiple devices: FX797E, all FX7870 and FX726 models, plus 2-hole blade systems.

How to use it at home

1. Turn off the trimmer.
2. Remove the old blade with a screwdriver.
3. Place the new blade on the device and check that it is in the correct position, parallel to the housing.
4. Tighten the screws and turn on the device for a few seconds to make sure it runs smoothly.
5. Clean and lubricate the blade regularly, before and during use, with the BaByliss PRO 4 in 1 spray.

For what type of device

It fits the SkeletonFX FX7870 trimmers, including Boost+ Chameleon, SnapFX FX797E, and LO-PROFX FX726, plus other devices with a 2-hole blade system. The brand recommends it for thick or coarse hair and less sensitive skin. It is not for 45 mm blade clippers.

Specifications

What else you need

• BaByliss PRO Boost+ Chameleon SkeletonFX FX7870IBPE Trimmer
• BaByliss PRO SkeletonFX Gold FX7870GE Trimmer
• BaByliss PRO 4 in 1 Blade Care Spray
• Wahl Oil for blade lubrication, 100 ml

ProBeauty tip. If you have a SkeletonFX Boost+ Chameleon, keep the FX707C2ZE as a spare blade: it has the same deep-tooth shape as the blade you already use.

BaByliss PRO FX3 FXX3RFBE is the replacement set for the FX3 shaver with a double foil and rotary motor. It contains the double foil shaver head and 2 blades. Use it when you want the FX3 to once again shave close to the skin on the face, neck, and hairline.

What it does for you

• Hypoallergenic titanium foils, just like those on the new FX3 shaver.
• Very thin, offset double foil, which follows the contours of the head and face.
• Replace everything that cuts: the foil head and the 2 blades come together.
• Keep the shaver you know, without having to buy another when the cutting performance declines.

How to use it at home

1. Turn off the shaver and set the cap aside.
2. Press the button that releases the top part and remove the old shaver head.
3. Remove the old blades and brush out the hair left in the shaver.
4. Mount the new blades, then the new head, until they are firmly in place. Do not force the parts and do not bend the foil.
5. Turn on the shaver and check that it works correctly.

For which type of shaver

It is the replacement set for the BaByliss PRO FX3 double foil shaver (FXX3SBE). It is not for FoilFX02, FXONE, UVFOIL02, or for single foil shavers, which have their own sets.

Specifications

What else you need

• BaByliss PRO FX3 shaver, for which the set is made
• BaByliss PRO 4-in-1 spray for shaver maintenance
• Wahl oil for lubricating the blades
• Wahl Blade Ice spray for cleaning the blades

ProBeauty tip. The FX3 has a button that easily releases the top part, designed by the brand for cleaning. Use it at the end of each day of use and brush the blades, so hair does not accumulate under the new foil.

Upgrade your shaver's performance with the BabylissPRO UV Single Professional Replacement Kit (FXLFS1E) – designed to deliver ultra-precise cutting on contours, neck, face, and hairline. This complete kit contains a black titanium foil replacement head and a single high-precision blade, exclusively compatible with the UVFOIL01 – FXLFS1E model.

✔ What the kit contains:

• Double black titanium foil – superior strength and precision
• Single blade – for a smooth and even cut
• Replacement head – fits perfectly with the UV Single FXLFS1E shaver

📌 Compatibility:
🔒 Suitable only for BabylissPRO UV Single Foil FX – model FXLFS1E (UVFOIL01)
⚠️ Not compatible with dual-foil models or other shavers.

✨ Key benefits:

• Ultra-precision for clean contours and fine details
• Professional finish without irritation or pulling
• Superior quality materials for extended durability
• Quick and easy head and blade replacement

🔧 How to replace the shaver head:
1️⃣ Turn off the shaver and press the side button to open the head
2️⃣ Remove the old blade and install the new blade
3️⃣ Place the new foil and protective head until it clicks into place
4️⃣ Check the shaver's function before use

💡 PRO Tip:
Clean the shaver after each use and replace the foil and blade periodically for optimal performance with every shave.

🔧 BabylissPRO – precision and professionalism in every detail!

Discover the superior quality of Wahl blades, designed to deliver exceptional precision in every detail. The blade set for the Gold Cordless Detailer Li Gold is engineered to ensure an extremely fine and uniform cut, ideal for precise outlining and refined detailing. The 0.4 mm T-Wide blade, finished in an elegant gold, not only adds a touch of style to your equipment but also guarantees top performance, redefining the standards of excellence in trimming.

Technical Specifications:

• Compatible with Gold Cordless Detailer Li Gold.

The Wahl Super Taper Standard Taper Blade is the universal replacement blade for the Wahl Super Taper, Cordless Super Taper, Magic Clip, and Cordless Senior. Wahl describes it as a versatile blade for removing large volumes of hair and for any routine clipper work. It is installed using a screwdriver.

What it does for you

• Quickly removes large volumes of hair: designed for removing a large amount of hair.
• A blade for the whole haircut: suitable for general cutting, with or without guide combs.
• Cutting length of 1 to 2 mm, with a cutting width of 46 mm.
• Compatible with four Wahl clippers: Super Taper, Cordless Super Taper, Magic Clip, Cordless Senior.

How to use it at home

1. Turn off the clipper and unplug it or remove it from the charging stand.
2. Unscrew the screws on the old blade and remove it.
3. Place the new blade on the clipper head, with the drive lever engaged in the moving blade.
4. Replace the screws and tighten them just enough so that you can still move the blade.
5. Align the blades: the moving blade must not protrude beyond the fixed blade. Only then tighten the screws completely.
6. Apply a few drops of oil to the teeth and run the clipper for a few seconds.

For which type of clipper

For the Wahl Super Taper and Cordless Super Taper, which come with it from the factory, and for the Magic Clip and Cordless Senior, according to Wahl Europe. It is the everyday working blade. For skin fades, Wahl has dedicated blades with a shorter cut.

Specifications

What else you need

• Wahl Super Taper Clipper
• Wahl Cordless Super Taper Clipper
• Wahl Magic Clip Corded Clipper
• Wahl Cordless Senior Clipper
• Wahl Oil for lubricating the blades
• Wahl Blade Ice Spray that cools and cleans the blades

ProBeauty Tip. Keep a second Standard Taper blade installed on an old clipper. Use it only for bulk removal, and the fade blade will stay sharp longer.

The Wahl Legend Wedge Blade is the replacement blade for Wahl Legend and Cordless Legend clippers. Its deeper teeth grip hair better, so you cut faster and have a wider fade range. Attach it with the screwdriver and screws included in the package.

What it does for you

• Cut faster: deeper teeth pull more hair between the blades on each pass.
• Fade over a wider range: Wahl UK talks about the extended blade glide technology.
• Blend evenly: Crunch technology gives a bolder cut and even transitions.
• Work close to the skin: it can be adjusted to zero overlap.
• Cutting length from 0.7 to 1.7 mm, over a width of 46 mm.

How to use it at home

1. Turn off the clipper and unplug it or remove it from the charging station.
2. Unscrew the screws of the old blade and remove it.
3. Place the new blade on the head, with the training lever caught in the moving blade.
4. Put the screws back in place and tighten them just enough so you can still move the blade.
5. Align the blades: the moving blade must not stick out in front of the fixed one. Only then tighten the screws all the way.
6. Put a few drops of oil on the teeth and turn on the clipper for a few seconds.

For what type of device

For Wahl Legend and Wahl Cordless Legend, according to Wahl Europe and Wahl UK. It is the blade these clippers come with from the factory. Choose it for soft fades, blending, and general cutting. It does not fit the Magic Clip, Senior, or Super Taper.

Specifications

What else you need

• Wahl Legend corded clipper
• Wahl Cordless Legend clipper
• Wahl oil for lubricating the blades
• Wahl Blade Ice spray that cools and cleans the blades

ProBeauty tip. Deep teeth collect more hair between the blades. After each client, blow on or brush the blade and put a drop of oil. The clipper stays quiet and does not overheat.

Restore your Babyliss Pro shavers to their original power with Babyliss Pro FoilFX02 FXFS2E replacement blades – designed for ultra-fine, effortless cuts!

🔧 Universal compatibility: fits all Babyliss Pro Shavers, offering versatility and ease of use.
🧼 Easy to replace and clean: blade replacement is simple and quick, ideal for hygienic device maintenance.
✂️ Professional results: consistent performance and top precision for a perfect shave every time.

Recommended for salon professionals and personal use – when you want to maintain peak performance!

💡 Probeauty Tip: Don't wait for the blade to lose its effectiveness – change it regularly for an impeccable experience and a consistently fresh look!

With a tradition of over 100 years in cutting excellence, Wahl Professional continues to be the preferred choice of top hairstylists worldwide. Wahl blades and clippers redefine professional hairdressing standards, offering technological innovations, elegant design, and unparalleled performance. Wahl remains synonymous with premium quality, a brand that continues to inspire and dominate the hairstyling industry.

Key Features:

• Superior Durability: The Diamond Blade with carbon coating does not rust, is extremely durable, and easy to clean, ensuring a long lifespan.
• Versatility: The blade set offers 5 integrated cutting lengths, ranging from 0.7 mm to 3 mm, for maximum cutting customization.
• Easy Adjustment: Cutting lengths are adjusted directly on the blade set, offering comfort and precision in use.
• Compatibility: Suitable for multiple Wahl clipper models, including Wahl Creativa, Wahl Bravura, Wahl Super Groom, and Wahl Motiva.

BaByliss PRO FXPCGE is a set of 8 guide combs for FX8700, FX825, and FX895E hair clippers. They cover lengths from 1.5 to 19 mm, so you can work from short fades to longer haircuts. They are made of glass-fiber-reinforced nylon and attach to the clipper with a metal clip.

What they do for you

• Cut uniformly at the chosen length, with 8 settings: 1.5, 3, 4.8, 6, 10, 13, 16, and 19 mm.
• Stay firmly on the clipper: the metal clip holds each guide comb securely in place so it won't slip during cutting.
• Withstand daily use: glass-fiber-reinforced nylon is lightweight and wear-resistant.
• Create gradual fade transitions, with settings from 0.5 to 6.
• They also fit other clippers: the brand states that they fit most blades with 2 mounting holes.

How to use them at home

1. Turn off the clipper and clear hair from the blade.
2. Choose the guide comb according to the desired length from the table below.
3. Place the guide comb over the blade and press until the metal clip snaps into place.
4. Check that it is securely attached before turning on the clipper.
5. Move the clipper through the hair in even strokes without pressing the guide comb into the scalp.
6. After cutting, remove the guide comb, brush off the hair, and store the set in a safe place.

For what type of device

BaByliss PRO says that the set fits all FX8700 models, plus FX825 and FX895E, and most clipper blades with 2 mounting holes. If you have a different clipper, check how the blade is attached first. They are not designed for trimmers.

Specifications

What else you need

• BaByliss PRO Boost+ Gold hair clipper from the FX8700 series
• BaByliss PRO Boost+ Chameleon hair clipper from the FX8700 series
• BaByliss PRO SnapFX FX895E hair clipper
• BaByliss PRO FX4in1 spray for blade maintenance
• Wahl oil for hair clipper blades

ProBeauty tip. When fading, always go up one setting at a time: from 3 to 4.8 mm, then to 6 mm. Jumping directly from 3 to 6 mm leaves a visible line between sections.

Wahl No. 1 Black 3 mm Guard is the standard Wahl 3 mm guard, sold separately. Wahl says that No. 1 leaves approximately 3 mm of hair, for very short haircuts. Get it to replace a lost or broken one, or to have a second piece on hand.

What it does for you

• Cuts uniformly at 3 mm over the entire area you pass the clipper over.
• Use it for very short haircuts, like buzz cuts.
• Complete the set without having to buy all 8 guards again.
• Works on several Wahl clippers: the brand lists it as compatible with 8 models, from the Super Taper to the Balding.

How to use it at home

1. Turn off the clipper and brush the hair off the blade.
2. Place the guard on the blade and press until it clicks into place. Check that it is secure before turning it on.
3. Cut against the direction of hair growth, using even strokes.
4. Pass over the same area several times to catch the lying hairs.
5. After cutting, clean it with a small brush. From time to time, wash it with warm water and mild soap and let it dry completely.

For what type of clipper

Wahl lists it as compatible with the Super Taper, Super Taper Cordless, Legend, Legend Cordless, Senior Cordless, Magic Clip, Magic Clip Cordless, and Balding. You receive a single guard, not a set. It is not for outline clippers or clippers with slide-on guards, such as the Kuno or ChromStyle.

Specifications

What else you need

• Wahl No. 2 Guard, longer
• Complete Wahl Premium Guard Set
• Wahl Magic Clip Cordless Clipper
• Wahl Clipper Blade Oil

ProBeauty Tip. No. 1 is the last step before the blade without a guard. For a fade, make the transition to No. 2 (6 mm) with short strokes, pulling the clipper out of the hair, so that no line remains.

The Wahl Stealth Beret Black Chrome Blade is the replacement blade for Wahl Beret and Stealth Beret trimmers. It features a black chrome precision blade and a quick-change system. It cuts at 0.4 mm, for close-to-skin edging and fine details.

What it does for you

• Close-to-skin edging: cuts at 0.4 mm.
• Fine details: Wahl makes it for any finishing work.
• Change it in a few seconds: it has a quick-change system, no screwdriver needed.
• Black chrome precision blade, like on the Stealth Beret trimmer.

How to use it at home

1. Turn off the trimmer.
2. Remove the old blade from the quick-change system, as shown in the trimmer instructions.
3. Place the new blade in position and press until it locks.
4. Put a drop of oil on the teeth and run the trimmer for a few seconds.
5. Work the edges with the skin stretched.
6. At the end, brush the teeth and lubricate again.

For what type of device

For Wahl Beret and Stealth Beret trimmers, according to Wahl Europe. It is the blade for edging, beards, and details. It does not fit the Detailer, Hi-Viz, or hair clippers.

Specifications

What else you need

• Wahl Beret Stealth Trimmer
• Wahl Beret Trimmer
• Wahl Oil for lubricating the blades
• Wahl Blade Ice Spray that cools and cleans the blades

ProBeauty Tip. Since it can be changed without a screwdriver, it is easy to keep two blades. One for the beard, the other for hair edging: you clean them one by one and work without breaks.

Improve your trimming performance with the original set of 8 colored Wahl attachment combs, designed for precise, fast, and personalized cutting. Ideal for barbershops, salons, or home use, this set offers a variety of lengths to easily achieve any haircut.

Lengths included in the set: 3 mm, 6 mm,10 mm,13 mm,16 mm,19 mm, 22 mm, 25 mm

Compatibility

 Fits all Wahl clippers with standard (full-size) blades

Key advantages

• Durable guides with rounded edges for comfort and safety
• Glides easily through hair, reducing working time
• Suitable for a wide range of haircuts, from fades to classic cuts
• Organization tray included – keep your workspace clean and professional

The Wahl T-Cut T-Blade is the replacement blade for Wahl T-Cut and ChroMini trimmers. It has a T-shaped blade made of quality steel and cuts at 0.3 mm. It is designed for neck and beard edging and for clean lines around the ears.

What it does for you

• Clean neck and beard lines: designed for very short cuts and precise edging.
• Clean lines around the ears: the T-shape allows you to work comfortably around them.
• Very short cut: the cutting length is 0.3 mm.
• Built to last: made of high-quality steel.
• Works with two trimmers: T-Cut and ChroMini.

How to use it at home

1. Turn off the trimmer.
2. Remove the old blade as instructed by the trimmer.
3. Place the new blade on the trimmer and press until it locks into place.
4. Apply a drop of oil to the teeth and turn on the trimmer for a few seconds.
5. Edge with short strokes, keeping the skin taut.
6. After use, brush hair out from between the teeth and oil again.

For which type of device

For Wahl T-Cut and ChroMini trimmers, according to Wahl Europe. Wahl UK lists it as a replacement part for the ChroMini Duo. It is for edging, beards, and finishing, not for removing bulk hair.

Specifications

What else you need

• Wahl ChroMini Duo Trimmer
• Wahl T-Cut Trimmer
• Wahl U-Blade for Precise Lines
• Wahl Oil for Lubricating Blades
• Wahl Blade Ice Spray to Cool and Clean Blades

ProBeauty Tip. For the neckline, draw the corners first, then connect them. The line will be straight, and you only need to correct minor unevenness at the end.

Wahl Professional - 100 years of excellence in haircutting. The top choice of hairstylists worldwide, Wahl clippers redefine standards in professional hairdressing. With technological innovations, elegant design, and superior performance, Wahl is synonymous with first-class quality. Discover the art of haircutting with the brand that shaped the hairstyling industry and continues to shine in every salon. The Wahl Hi-Viz trimmer blade set is a specially designed blade with a very wide T-Blade cutting shape, with a width of 40.6 mm and a cutting width of 38 mm. The Wahl Hi-Viz blade features a DLC coating that gives the cutting blade a longer lifespan and stays up to 8 times sharper than any other standard cutting blade. This blade set can only be used with the Wahl Hi-Viz Trimmer.

The Wahl Detailer T-Blade is the replacement T-blade for Wahl Detailer, Cordless Detailer Li, and Hero trimmers. It has a 35 mm blade and cuts at 0.4 mm. It is adjustable to zero overlap, for precise contours.

What it does for you

• Precise contours: 35 mm T-blade, designed for detailing.
• Very short cut: 0.4 mm.
• Zero control: adjustable to zero overlap.
• Easily reach small areas: it is narrower than the T-Wide blade.
• Ready to mount: comes with oil and screws, according to Wahl UK.

How to use it at home

1. Turn off the machine and unplug it or remove it from the charging stand.
2. Unscrew the screws of the old blade and remove it.
3. Place the new blade on the head, with the drive lever caught in the moving blade.
4. Put the screws back in place and tighten them lightly, so you can still move the blade.
5. Align the blades: the moving blade must not protrude in front of the fixed one. Only then tighten the screws completely.
6. Put a few drops of oil on the teeth and turn on the machine for a few seconds.

For what type of device

For Wahl Detailer, Wide Detailer, Cordless Detailer Li, Hero, and 8900 trimmers, according to Wahl UK and Wahl Europe. It is the blade for contours, beards, and details. It does not fit the Beret, Hi-Viz, or hair clippers.

Specifications

What else you need

• Wahl Detailer Wide Trimmer
• Wahl Cordless Detailer Li Trimmer
• T-Wide Blade for Detailer
• Wahl Oil for lubricating the blades
• Wahl Blade Ice Spray that cools and cleans the blades

ProBeauty Tip. If you work a lot on beards, keep both this blade and a T-Wide one. With the wide one you do the cheeks quickly, with the narrow one you finish the corners of the mouth and the mustache.

The Wahl Detailer T-Wide blade is the replacement blade for Wahl Detailer, Wide Detailer, Cordless Detailer Li, and Hero trimmers. It has an extra-wide 38 mm carbon steel T-blade. It cuts at 0.4 mm and is adjustable to zero overlap for clean lines.

What it does for you

• Clean lines: Wahl designed it for a very close trim and a clean line.
• Work close to the skin: it cuts at 0.4 mm and is adjustable to zero overlap.
• Finish quickly: the 38 mm blade covers a wide area with each pass.
• Works for designs too: it is good for details, contours, and hair designs.
• Self-sharpening, says Wahl Europe on the T-Wide blade page.

How to use it at home

1. Turn off the trimmer and unplug it or remove it from the charging station.
2. Unscrew the screws on the old blade and remove it.
3. Place the new blade on the head, with the adjustment lever caught in the moving blade.
4. Put the screws back in place and tighten them just enough so that you can still move the blade.
5. Align the blades: the moving blade must not protrude in front of the fixed blade. Only then tighten the screws completely.
6. Put a few drops of oil on the teeth and turn on the trimmer for a few seconds.

For what type of device

For Wahl trimmers with a T-Wide blade: Detailer, Wide Detailer, Cordless Detailer Li, and Hero. It is the blade for contours, beards, and designs. It is not for hair clippers or the Hi-Viz, which has its own blade.

Specifications

What else you need

• Wahl Wide Detailer trimmer
• Wahl Cordless Detailer Li trimmer
• T-Wide Gold blade, with a titanium and DLC coating
• Wahl oil for lubricating the blades
• Wahl Blade Ice spray that cools and cleans the blades

ProBeauty tip. Carbon steel holds its edge well, but it does not like moisture. After disinfecting or using Blade Ice, wipe the blade and put a drop of oil on it before putting it away.

BaByliss PRO Titanium Fade FX8010CME is a 45 mm titanium-coated replacement fade blade for FX8700, LO-PROFX FX825, and SnapFX FX895E clippers. The cutting surface is flat and elongated for vertical movement. It is ideal for fades and clean transitions.

What it does for you

• Cuts cleanly and precisely across its entire 45 mm width.
• Stays sharp longer: titanium is a hard, durable coating, according to the brand.
• Is gentler on sensitive skin thanks to titanium's hypoallergenic properties.
• Makes vertical movement easier when fading, thanks to its flat, elongated surface.
• Adjusts to zero-gap for very short cuts.

How to use it at home

1. Turn off the clippers and move the fine adjustment lever on the left to the top position.
2. Loosen the screws with a screwdriver and set them aside.
3. Lift the old moving blade slightly and replace it with the new one on the oscillator.
4. Place the new fixed blade with the moving blade centered and parallel to it to avoid injury.
5. Secure the screws back in place.
6. Clean and maintain the blade regularly with BaByliss PRO 4-in-1 spray before and during use.

For which type of clipper

It fits clippers in the FX8700 series (ChromFX, Boost+), LO-PROFX FX825, and SnapFX FX895E, as well as other clippers with a two-hole blade system. It is not for SkeletonFX trimmers, which use 40 mm T-blades.

Specifications

What else you need

• BaByliss PRO Boost+ Metal Chameleon FX8700IBPE Clippers
• BaByliss PRO SnapFX FX895E Clippers
• BaByliss PRO 4-in-1 Blade Care Spray
• Wahl Blade Lubricating Oil, 100 ml

ProBeauty Tip. Hold the clipper almost perpendicular to the head when working on the transition area: the flat surface of the fade blade cuts most evenly with a vertical, bottom-to-top motion.

Discover ultimate performance in detail and transitions with the Wahl Vapor F32 Fadeout Blade, the revolutionary cutting head specially designed for impeccable fades and ultra-close finishes. Ideal for professional barbers who prioritize precision, speed, and versatility, this blade redefines the standards in the art of haircutting.

Made from high-quality carbon steel and coated with black PVD + DLC, the Fadeout Blade combines exceptional durability with an ergonomic design and remarkable efficiency:

Ultra-durable and anti-corrosive – blades are designed to stay sharp up to 4x longer*
Smooth cutting, without irritation – the 32 micro-teeth with spherical tips glide gently on the skin, reducing the risk of scratches or snags
Fast and clean cut – with 50% more blades and 6g lighter than the standard Wahl blade, for a fluid experience
Adjustable zero-gap – ideal for defined contours and high-precision details

Technical specifications:
Blade type: Fadeout / Fine
Number of teeth: 32
Optimized weight: 6g lighter
Adjustment: zero-gap for close contours
Material: carbon steel + PVD & DLC coating

Ideal for:
Professional fades
Ultra-fine contours and details
Barbers who want precision, comfort, and impeccable results

Choose the Wahl Vapor F32 Fadeout Blade if you want to offer your clients a top-tier experience, with smooth haircuts, perfectly defined fades, and an efficiency that highlights your skill with every move!

The BaByliss PRO SkeletonFX FX707G2ZE is a 40 mm gold titanium-coated T-blade with 2 mm deep teeth. Use it with the SkeletonFX FX7870, SnapFX FX797E, and LO-PROFX FX726 trimmers. It is designed for clean outlines, sharp lines, and detailing.

What it does for you

• Creates clean outlines and sharp lines thanks to its 2 mm deep teeth.
• Stays sharp longer: titanium is a hard, durable coating, according to the brand.
• Is gentler on sensitive skin because titanium has hypoallergenic properties.
• Cuts through thick or coarse hair when working on edges and details.
• Adjusts to a zero-gap setting for trimming very close to the skin.

How to use it at home

1. Turn off the trimmer.
2. Remove the old blade with a screwdriver.
3. Place the new blade on the trimmer and make sure it is positioned correctly, parallel to the housing.
4. Tighten the screws and turn on the trimmer for a few seconds to make sure it runs smoothly.
5. Clean and lubricate the blade regularly, before and during use, with BaByliss PRO 4-in-1 spray.

What type of trimmer it is for

It fits the SkeletonFX FX7870 trimmers, including Gold and Boost+ Gold, SnapFX FX797E, and LO-PROFX FX726, as well as other trimmers with a two-hole blade system. The brand recommends it for thick or coarse hair and less sensitive skin. It is not for hair clippers with a 45 mm blade.

Specifications

What else you need

• BaByliss PRO SkeletonFX Gold FX7870GE Trimmer
• BaByliss PRO Boost+ SkeletonFX Gold FX7870GBPE Trimmer
• BaByliss PRO 4-in-1 Blade Care Spray
• Wahl Blade Lubricating Oil, 100 ml

ProBeauty Tip. The FX707G2ZE maintains the gold appearance of the SkeletonFX Gold trimmer. Keep it on hand as a spare blade for sharp lines and beard trimming.

The Wahl Magic Clip 2 Hole Blade is the replacement blade for the Wahl Magic Clip Corded, Super Taper, Cordless Super Taper, and Cordless Senior. It has trimmer-like teeth and cutting length for short, clean results. It is ideal for completely shaving the head and creating short fades.

What it does for you

• Cut very short: cutting length ranges from 0.5 to 1.2 mm.
• Clean, trimmer-like results: the teeth are similar to those of a trimmer.
• Short fades: Wahl recommends it for close fades and completely shaving the head.
• One blade for four machines: Magic Clip Corded, Super Taper, Cordless Super Taper, and Cordless Senior.

How to use it at home

1. Turn off the machine and unplug it or remove it from the charging stand.
2. Unscrew the screws on the old blade and remove it.
3. Place the new blade on the clipper head, with the adjustment lever engaged in the moving blade.
4. Replace the screws and tighten them just enough so that you can still move the blade.
5. Align the blades: the moving blade must not protrude beyond the fixed blade. Only then tighten the screws completely.
6. Apply a few drops of oil to the teeth and run the machine for a few seconds.

For which type of machine

For Wahl machines with a fixed blade, as designated by Wahl: Magic Clip Corded, Super Taper, Cordless Super Taper, and Cordless Senior. Choose it for short fades and completely shaved heads. It is not for the Cordless Magic Clip, Legend, or Senior 2.0, which have their own blades.

Specifications

What else you need

• Wahl Magic Clip Corded Clippers
• Wahl Super Taper Clippers
• Wahl Cordless Super Taper Clippers
• Wahl Cordless Senior Clippers
• Wahl Blade Oil for lubricating the blades
• Wahl Blade Ice Spray for cooling and cleaning the blades

ProBeauty Tip. If you also have a Super Taper, you can keep the 2 Hole blade on it for short areas. Keep the Magic Clip for the rest of the haircut and avoid changing the blade for every client.

The Wahl Premium Set of 8 hair clipper guards in a case is part of the Premium Cutting Guides line and includes 8 guards ranging from 3 to 25 mm. They come in an organizer case where each length has its own place. It is the perfect set if you cut your hair often at home and want the guards always close at hand and neatly organized.

What it does for you

• Covers standard clipper cuts: 3, 6, 10, 13, 16, 19, 22 and 25 mm.
• Helps you quickly find the right length, as each guard has its own place in the case.
• The guard stays securely in place: Secure Fit technology keeps it on the blade for a long time.
• Makes cutting more comfortable: Rounded teeth glide through the hair without scratching.
• Is durable and retains its shape, thanks to glass and mineral-filled plastic.

How to use them at home

1. Turn off the clipper and remove hair from the blade.
2. Take the desired length out of the case. If you are unsure, start with a longer one.
3. Place the guard on the blade and press down until it locks. Check that it is securely attached.
4. Cut against the direction of hair growth using even strokes.
5. Finally, clean the guard with a brush and put it back in its place.

For which type of clipper

The Wahl Premium Cutting Guides product sheet states that the guards fit all Wahl corded clippers. For the same line, Wahl also lists the Super Taper, Super Taper Cordless, Legend, Legend Cordless, Senior Cordless, Magic Clip, Magic Clip Cordless and Balding models. They are not for outline clippers or clippers with slide-on guards, such as Kuno or ChromStyle.

Specifications

What else you need

• Wahl Legend Clipper
• Wahl Super Taper Clipper
• Wahl Magic Clip Cordless Clipper
• Wahl Premium Set with Short Guards
• Wahl Clipper Blade Oil

ProBeauty Tip. Put the guard back in the case as soon as you are finished with it, not at the end. When cutting a fade, you change lengths often, so you won't mix up 13 mm with 16 mm, which look almost the same.

Wahl No. 5 Black 16 mm Guard is the standard Wahl 16 mm guard, sold separately. Wahl says that No. 5 leaves approximately 16 mm of hair, for a longer crew cut and for fade haircuts. Get it to replace a lost or broken one, or to have a second one on hand.

What it does for you

• Cuts uniformly at 16 mm over the entire area you pass over with the machine.
• Use it for a longer crew cut and fade haircuts.
• Complete the set without having to buy all 8 guards again.
• Works on several Wahl machines: the brand lists it as compatible with 8 models, from the Super Taper to the Balding.

How to use it at home

1. Stop the machine and brush the hair off the blade.
2. Place the guard on the blade and press until it clicks into place. Check that it is secure before you start.
3. Cut against the direction of hair growth, with even strokes.
4. Pass over the same area several times to catch the lying hairs.
5. After cutting, clean it with a small brush. From time to time, wash it with warm water and mild soap and let it dry completely.

For what type of machine

Wahl lists it as compatible with the Super Taper, Super Taper Cordless, Legend, Legend Cordless, Senior Cordless, Magic Clip, Magic Clip Cordless, and Balding. You receive a single guard, not a set. It is not for outline machines or for machines with slide-on guards, such as the Kuno or ChromStyle.

Specifications

What else you need

• Wahl No. 4 guard, shorter
• Wahl No. 6 guard, longer
• Complete Wahl Premium guard set
• Wahl Magic Clip Cordless hair clipper
• Wahl oil for hair clipper blades

ProBeauty tip. For a long fade, use No. 5 on the top of the sides and No. 4 (13 mm) lower down. Short strokes, upwards and outwards.

The Wahl Balding Replacement Blade is the blade for the Wahl Balding clipper. It has trimmer-like teeth and a cutting length of 0.5 mm, for bald heads and skin fades. It is adjusted to zero overlap, so you can work very close to the skin.

What it does for you

• Bald head and skin fade: Wahl designed it for bald fades and skin fades.
• Short, clean cut: the trimmer-like teeth cut at 0.5 mm.
• Zero control: it is adjusted to zero overlap for results close to the skin.
• Quickly cover the head: the cutting width is 46 mm.
• Ready to install: comes with oil and screws, according to Wahl UK.

How to use it at home

1. Turn off the clipper and unplug it or remove it from the charging station.
2. Unscrew the screws on the old blade and remove it.
3. Place the new blade on the clipper head, with the adjustment lever caught in the moving blade.
4. Put the screws back in place and tighten them just enough so that you can still move the blade.
5. Align the blades: the moving blade must not protrude in front of the fixed blade. Only then tighten the screws completely.
6. Put a few drops of oil on the teeth and turn on the clipper for a few seconds.

For what type of device

For the Wahl Balding clipper, according to Wahl Europe and Wahl UK. It is the blade for bald heads, skin fades, and the shortest area of a fade. It is not a general-purpose cutting blade or for long hair.

Specifications

What else you need

• Wahl Balding Clipper
• Wahl Guard for the Balding Clipper
• Wahl Oil for lubricating the blades
• Wahl Blade Ice Spray that cools and cleans the blades

ProBeauty Tip. For a bald head, first pass the clipper in the direction of hair growth, then in the opposite direction. The first pass removes the bulk, the second leaves the skin smooth without insisting on the same area.

The Panasonic Professional WER9P10 is a narrow 10 mm replacement blade for Panasonic professional trimmers. Panasonic lists it for the ER-PA11 and also includes it in the replacement parts for the ER-GP22 trimmer. It is a blade for fine lines, not for trimming large areas.

What it does for you

• Reach small areas: the narrow 10 mm blade fits into corners and around the ear.
• Clean lines: The ER-GP22, which it is listed for, has an additional blade for precise lines and styling.
• Original part: the WER-9P10 code belongs to Panasonic, not a copy.
• No need to replace the trimmer: you only replace the narrow blade when it becomes dull.

How to use it at home

1. Turn off the trimmer and remove it from the charging stand.
2. Remove the old narrow blade as shown in the trimmer manual.
3. Brush out any hair left in the blade.
4. Mount the new blade and check that it is not loose.
5. Put a drop of oil on the teeth and turn the trimmer on briefly.

For what type of machine

Panasonic lists it for the ER-PA11 trimmer and includes it in the accessories for the ER-GP22 trimmer. It is not the main blade of the ER-GP21 or ER-GP22. That one has a different code, WER9352.

Specifications

What else you need

• Oil for hair clipper blades
• Spray that cools and cleans the blades
• 4-in-1 spray for hair clipper maintenance

ProBeauty tip. With a narrow blade, work with short strokes on skin stretched with the other hand. This way, the line comes out straight and you do not press multiple times on the same area.

BaByliss PRO Graphite Taper FX803BME is a 45 mm replacement blade for FX8700, LO-PROFX FX825, and SnapFX FX895E clippers. The blade has a crescent shape that supports a natural back-and-forth motion when cutting. It is suitable for fades and clean finishes.

What it does for you

• Makes fades easier: the crescent shape follows the back-and-forth motion of your hand.
• Cuts cleanly and precisely across its entire 45 mm width.
• Heats up less: the graphite coating reduces friction and keeps the blade at a lower temperature.
• Is highly durable, as the graphite is a very durable coating, according to the brand.
• Can be adjusted to zero-gap for very short cuts.

How to use it at home

1. Turn off the clippers and raise the fine adjustment lever on the left to the top position.
2. Loosen the screws with a screwdriver and set them aside.
3. Gently lift the old moving blade and replace it with the new one on the oscillator.
4. Install the new fixed blade and center the moving blade parallel to it to avoid the risk of injury.
5. Reattach the screws.
6. Clean and maintain the blade regularly with BaByliss PRO 4-in-1 spray, as recommended by the brand.

For which type of clipper

It fits clippers from the FX8700 series (ChromFX, Boost+), LO-PROFX FX825, and SnapFX FX895E, as well as other clippers with a 2-hole blade system. It is not for SkeletonFX trimmers, which use 40 mm T-blades.

Specifications

What else you need

• BaByliss PRO Boost+ Metal Gold FX8700GBPE Clippers
• BaByliss PRO SnapFX FX895E Clippers
• BaByliss PRO 4-in-1 Blade Care Spray
• Wahl Blade Lubricating Oil, 100 ml

ProBeauty Tip. Let your wrist follow the curve of the blade: use short, arcing, bottom-to-top motions. This way, you make full use of the crescent shape without pressing the clipper against your head.

BaByliss PRO Graphite Fade FX8010BME is a 45 mm graphite-coated replacement fade blade for hair clippers in the FX8700 and LO-PROFX FX825E series. The cutting surface is flat and elongated, designed for vertical movement. It is ideal for fades and clean cuts.

What it does for you

• Cuts cleanly and precisely across its entire 45 mm width.
• Glides very smoothly: the graphite coating creates very little friction.
• Does not overheat because the blade operates at a lower temperature.
• Makes a quieter sound when cutting, according to the brand.
• Highly durable, as graphite is a very resilient coating.

How to use it at home

1. Turn off the hair clipper and set the fine adjustment lever on the left to the top position.
2. Loosen the screws with a screwdriver and set them aside.
3. Lift the old moving blade slightly and replace it with the new one on the oscillator.
4. Place the new fixed blade with the moving blade centered and parallel to it to avoid injury.
5. Secure the screws back in place.
6. Clean and maintain the blade regularly with BaByliss PRO 4-in-1 spray before and during use.

For which type of clipper

It fits hair clippers in the FX8700 (ChromFX, Boost+) and LO-PROFX FX825E series, as well as other clippers with a 2-hole blade system. It is not designed for SkeletonFX trimmers, which use 40 mm T-blades.

Specifications

What else you need

• BaByliss PRO Boost+ Metal Gold FX8700GBPE Hair Clipper
• BaByliss PRO ChromFX FX8700E Hair Clipper
• BaByliss PRO 4-in-1 Blade Care Spray
• Wahl Blade Lubricating Oil, 100 ml

ProBeauty Tip. If you cut many clients in a row, the graphite blade stays cooler, but it still needs spray between clients: spray it, let the clipper run for a few seconds, and wipe off the excess.

The Panasonic Professional WER9340 is the original replacement blade for the Panasonic ER-RZ10 clipper. Install it when the old blade no longer cuts cleanly. The clipper remains the same; only the cutting part is new.

What it does for you

• Clean cut again: a new blade catches the hair on the first pass without pulling it.
• Original Panasonic part: WER9340 is the code assigned by Panasonic for the ER-RZ10.
• No need to replace the entire clipper: replace only the worn blade and keep the device you know.
• Stress-free use on the skin: dull blades pull the hair, while new ones glide more easily.

How to use it at home

1. Turn off the clipper and unplug it or remove it from the charging stand.
2. Remove the old blade exactly as shown in the ER-RZ10 clipper manual.
3. Use the small brush to remove any hair left in the blade holder.
4. Mount the new blade in the same position and make sure it is securely fixed, without any play.
5. Apply a drop of oil to the teeth and turn on the clipper for a few seconds to spread the oil.

For which type of clipper

Panasonic specifies it for a single model: the ER-RZ10 clipper. Do not use it with other Panasonic clippers, even if they look similar. If you are not sure which model you have, check the label on the bottom of the clipper or in the manual, where the ER code is listed.

Specifications

What else you need

• Oil for clipper blades
• Spray that cools and cleans the blades
• 4-in-1 spray for maintaining clippers

ProBeauty tip. Keep the old blade until you see that the new one works well. After each use, brush the hair off the blades and apply a drop of oil so the new blade stays sharp longer.

The BaByliss PRO Power Definer FX672ME is a replacement blade sold for the BaByliss PRO FX672E Power Definer clipper. Out of the box, the FX672E comes with a 45 mm stainless steel blade that has been diamond-sharpened. When the blade no longer cuts cleanly, you replace it, and the clipper works like new again.

What it does for you

• It restores a clean cut, without pulling hairs or leaving them uncut.
• It extends the life of your clipper: you only replace the worn blade, not the entire device.
• It saves you a trip to the service center, because you can install it yourself.
• It preserves the clipper's length settings, provided you install the blades correctly aligned.

How to use it at home

1. Turn off the clipper and unplug it or remove it from the charging stand.
2. Release the old blade as shown in the clipper's manual, and remove the old set.
3. Position the new set with the moving blade centered and parallel to the fixed blade, then secure it in place.
4. Apply a few drops of oil to the teeth.
5. Turn on the clipper for a few seconds and check the cut on a test strand of hair.

For which type of device

It is sold for the BaByliss PRO FX672E Power Definer clipper, an older model, corded or cordless. We did not find a BaByliss PRO data sheet that lists other compatible models, so if you have a different clipper, write us the code before ordering.

What else you need

• BaByliss PRO 4-in-1 Blade Care Spray
• Wahl Oil for lubricating blades, 100 ml
• Wahl Blade Ice Spray for cooling and cleaning blades

ProBeauty Tip. Because the FX672E is an older model, keep the old blade until you check that the new one cuts cleanly. Lubricating it after every day of use extends its life.

Wahl No. 3 Black 10 mm Guard is the standard Wahl 10 mm guard, sold separately. Wahl says that No. 3 leaves approximately 10 mm of hair, for a short, classic haircut. Get it to replace a lost or broken one, or to have a second one on hand.

What it does for you

• Cuts uniformly at 10 mm over the entire area you pass over with the clipper.
• Use it for a short, classic haircut.
• Complete your set without having to buy all 8 guards again.
• Works with several Wahl clippers: the brand lists it as compatible with 8 models, from the Super Taper to the Balding.

How to use it at home

1. Turn off the clipper and brush the hair off the blade.
2. Place the guard on the blade and press down until it clicks into place. Check that it is secure before turning it on.
3. Cut against the direction of hair growth, using even strokes.
4. Pass over the same area several times to catch the lying hairs.
5. After cutting, clean it with a small brush. From time to time, wash it with warm water and mild soap and let it dry completely.

For what type of clipper

Wahl lists it as compatible with the Super Taper, Super Taper Cordless, Legend, Legend Cordless, Senior Cordless, Magic Clip, Magic Clip Cordless, and Balding. You receive a single guard, not a set. It is not for outline clippers or clippers with slide-on guards, such as the Kuno or ChromStyle.

Specifications

What else you need

• Wahl No. 2 guard, shorter
• Wahl No. 4 guard, longer
• Complete Wahl Premium guard set
• Wahl Magic Clip Cordless clipper
• Wahl clipper blade oil

ProBeauty tip. No. 3 is a good starting point for the top. On the sides, go down to No. 2 (6 mm), then blend the areas with No. 3 held slightly at an angle.

The Wahl 8-piece black guard set includes plastic guards 1–8, from 3 to 25 mm. Attach them to the clipper to increase the cutting length and trim evenly to your chosen length. It is the basic set for trimming at home, with all the usual sizes.

What it does for you

• You have all the basic sizes: 3, 6, 10, 13, 16, 19, 22 and 25 mm.
• Trim evenly, because the guard keeps the blade at the same distance from the scalp.
• Create fades by moving from one size to the next.
• Replace lost or broken guards on your clipper all at once.

How to use them at home

1. Turn off the clipper and clear the hair from the blade.
2. Choose a size. If you are unsure, start with a larger one: you can always cut more off.
3. Place the guard on the blade and press until it clicks into place. Check that it is secure.
4. Cut against the direction of hair growth using even strokes.
5. After trimming, clean the guards with a small brush and keep them dry in a box or bag.

For which type of clipper

Wahl UK says that the set fits all taper clippers. It is not for outline clippers or clippers that use slide-on guards, such as Kuno or ChromStyle. If you do not know what type of blade your clipper has, message us the model before ordering.

Specifications

What else you need

• Wahl Super Taper Clipper
• Wahl Legend Clipper
• Wahl Magic Clip Cordless Clipper
• Wahl Clipper Blade Oil
• Wahl Fading Brush

ProBeauty Tip. All the guards are black, so lay them out on the table in order, from size 1 to size 8, before you start. When creating a fade, you change guards frequently, so this helps prevent accidentally picking a smaller size.

BaByliss PRO FX801JE is a taper replacement blade for the BaByliss PRO FreshFX clipper. It is made of Japanese steel with a PVD coating and has a crescent-shaped profile. Use it when your clipper blade has become dull, is pulling hair, or has been damaged.

What it does for you

• Your clipper cuts cleanly again, without pulling hair.
• Follows the movement of your hand: the crescent profile helps with the outward motion used for transitions.
• Resists wear and corrosion thanks to the Japanese steel and PVD coating.
• Suitable for fades, transitions, and clipper-over-comb cutting.

How to use it at home

1. Check your clipper model: the blade is for the BaByliss PRO FreshFX.
2. Turn off the clipper and remove it from the charger.
3. Unscrew the old blade and use the brush to remove all hair from underneath.
4. Position the new blade, align the moving blade with the fixed one, and tighten the screws without forcing them.
5. Apply 2 or 3 drops of oil to the blade and run the clipper for a few seconds.

For which clipper

For the BaByliss PRO FreshFX clipper. If you have another FX series model and want to install it on that, write us your clipper code before ordering and we will confirm if it fits.

Specifications

What else you need

• BaByliss PRO FreshFX clipper
• Blade oil
• Wahl Blade Ice spray for cooling the blades

ProBeauty tip. After installation, check the alignment: the moving blade should sit slightly behind the fixed one across its entire width. If it protrudes forward, the clipper will scratch the skin.