Panasonic Professional

The Panasonic Professional WER9P10 is a narrow 10 mm replacement blade for Panasonic professional trimmers. Panasonic lists it for the ER-PA11 and also includes it in the replacement parts for the ER-GP22 trimmer. It is a blade for fine lines, not for trimming large areas.

What it does for you

• Reach small areas: the narrow 10 mm blade fits into corners and around the ear.
• Clean lines: The ER-GP22, which it is listed for, has an additional blade for precise lines and styling.
• Original part: the WER-9P10 code belongs to Panasonic, not a copy.
• No need to replace the trimmer: you only replace the narrow blade when it becomes dull.

How to use it at home

1. Turn off the trimmer and remove it from the charging stand.
2. Remove the old narrow blade as shown in the trimmer manual.
3. Brush out any hair left in the blade.
4. Mount the new blade and check that it is not loose.
5. Put a drop of oil on the teeth and turn the trimmer on briefly.

For what type of machine

Panasonic lists it for the ER-PA11 trimmer and includes it in the accessories for the ER-GP22 trimmer. It is not the main blade of the ER-GP21 or ER-GP22. That one has a different code, WER9352.

Specifications

What else you need

• Oil for hair clipper blades
• Spray that cools and cleans the blades
• 4-in-1 spray for hair clipper maintenance

ProBeauty tip. With a narrow blade, work with short strokes on skin stretched with the other hand. This way, the line comes out straight and you do not press multiple times on the same area.

The Panasonic Professional WER9340 is the original replacement blade for the Panasonic ER-RZ10 clipper. Install it when the old blade no longer cuts cleanly. The clipper remains the same; only the cutting part is new.

What it does for you

• Clean cut again: a new blade catches the hair on the first pass without pulling it.
• Original Panasonic part: WER9340 is the code assigned by Panasonic for the ER-RZ10.
• No need to replace the entire clipper: replace only the worn blade and keep the device you know.
• Stress-free use on the skin: dull blades pull the hair, while new ones glide more easily.

How to use it at home

1. Turn off the clipper and unplug it or remove it from the charging stand.
2. Remove the old blade exactly as shown in the ER-RZ10 clipper manual.
3. Use the small brush to remove any hair left in the blade holder.
4. Mount the new blade in the same position and make sure it is securely fixed, without any play.
5. Apply a drop of oil to the teeth and turn on the clipper for a few seconds to spread the oil.

For which type of clipper

Panasonic specifies it for a single model: the ER-RZ10 clipper. Do not use it with other Panasonic clippers, even if they look similar. If you are not sure which model you have, check the label on the bottom of the clipper or in the manual, where the ER code is listed.

Specifications

What else you need

• Oil for clipper blades
• Spray that cools and cleans the blades
• 4-in-1 spray for maintaining clippers

ProBeauty tip. Keep the old blade until you see that the new one works well. After each use, brush the hair off the blades and apply a drop of oil so the new blade stays sharp longer.

The Panasonic Professional WER9714 is the original replacement blade for Panasonic ER1421 and ER1420 trimmers. The ER1421 is Panasonic's barber trimmer for beard styling, with a 45° cutting angle. When the blade gets dull, you replace it and work like it's the first day again.

What it does for you

• Sharp contours again: new teeth cut the hair cleanly, without leaving stray hairs along the beard line.
• Original part: WER9714 is the code given by Panasonic for the ER1421 and ER1420.
• Works on older models too: the packaging says it is also used with the ER149 and ER147.
• Keep your trimmer: you only replace the part that wears out, not the whole device.

How to use it at home

1. Turn off the trimmer and remove it from the charger.
2. Remove the old blade as shown in your trimmer's manual.
3. Shake out and brush away the hair collected under the blade.
4. Snap the new blade into place until it is secure.
5. Lubricate the teeth with a drop of oil and let the trimmer run for a few seconds.

For what type of machine

The official Panasonic page lists it for the ER1421 and ER1420. The original packaging also lists the ER149 and ER147. For the ER-RZ10, ER-DGP62, or ER-GP22, Panasonic has other blades with different codes.

Specifications

What else you need

• Oil for clipper blades
• Spray that cools and cleans the blades
• 4-in-1 spray for clipper maintenance

ProBeauty tip. When contouring, a worn blade is first felt on the short hairs on the neck, which remain uncut. When you notice this, don't press harder on the skin, it's a sign that it's time for the WER9714.

🔪 Panasonic Professional Blade Set PPWER97161361 – designed for precision performance and maximum durability.
Made from high-quality stainless steel, this blade set offers a clean and even cut, ideal for professional use in salons or at home.

💡 Key Features:

• 🔸 Compatible with Panasonic ER-DGP62, ER-FGP62, and ER-HGP62 models
• 🔸 High-precision sharpening for a fine and safe cut
• 🔸 Material: corrosion-resistant stainless steel
• 🔸 Easy to assemble and clean
• 🔸 Consistent performance even after prolonged use

⚙️ Ideal for:
Professional barbers and users who want perfect results with every haircut.

📦 Package contents:
1 x Panasonic Professional Blade Set PPWER97161361