Products

BaByliss PRO BABZ020000010 is the replacement motor for the BaByliss PRO Caruso hair dryer. It is a service part, not an accessory: it is installed inside the dryer by an authorized service center. You buy it if the technician has told you that your Caruso dryer's motor needs to be replaced.

What it does for you

• It can bring your dryer back to life, if the fault is with the motor and the rest of the appliance is in good condition.
• Repair instead of throwing away: a good salon dryer is often worth repairing.
• You have the part with the brand code, BABZ020000010, which the service center can easily verify.
• You shorten the repair time, if the service center does not have the part in stock.

How to use it at home

1. You do not install it at home. The motor is connected to the dryer's electrical system, and incorrect installation can be dangerous.
2. Unplug the dryer and do not use it again until it is repaired.
3. Note down the exact model and code on the handle or the dryer's label.
4. Check with the service center that BABZ020000010 is the right part for your model.
5. Take the dryer and the motor to an authorized BaByliss PRO service center or to a qualified technician.
6. After repair, clean the filter at the back before the first use.

For what type of appliance

The motor is listed for the BaByliss PRO Caruso dryer. BaByliss PRO has had several dryers with this name, for example Caruso (BAB6510IE) and Caruso HQ (BAB6970IE), and the brand does not publish a compatibility sheet for this code. Do not order it until you confirm the model with the service center or with us.

What else you need

• BaByliss PRO BABD11E Diffuser, compatible with Caruso dryers
• Olivia Garden Ceramic+Ion SpeedXL 45 Round Brush
• Wella EIMI Thermal Image Heat Protection Spray

ProBeauty Tip. Before replacing the motor, ask the service center to also check the cable at the handle's exit. In dryers used daily, faults often occur there.

The BaByliss PRO M4560E is a white haircutting cape that you place around the client's shoulders before cutting. It covers their clothes, and the cut hair falls onto the cape instead of their collar or t-shirt. Use it in the barbershop or at home when cutting a family member's hair.

What it does for you

• Clothes stay free of hair because the cape covers the shoulders and chest.
• You can immediately see dark hair against the white background, making it easier to brush off at the end.
• The client stays more comfortable without hair getting under their collar.
• The workspace looks clean and tidy, especially next to BaByliss PRO tools.

How to use it at home

1. Place the cape around the client's shoulders so that it covers their chest, shoulders, and back.
2. Fasten it around the neck without tightening it, leaving enough room for one finger between the collar and the skin.
3. Check that it covers the shoulders well before you turn on the clipper.
4. During the haircut, occasionally brush off the hair that has collected in the folds.
5. At the end, undo the fastening, gently gather the cape inward, and brush the hair away from the client.

For what type of work

It is suitable for clipper or scissor haircuts, in the barbershop or at home. Dark hair is clearly visible against the white background; with blonde or gray hair, the strands are harder to see and require careful brushing off at the end. The brand does not confirm that it is waterproof, so do not use it as protection when dyeing hair.

What else you need

• BaByliss PRO 4Artists Barber Towel
• Straight cutting comb
• Jaguar A-Line 505 tapered cutting comb
• BaByliss PRO FX4in1 blade maintenance spray

ProBeauty tip. Place a small towel or neck band under the collar when cutting short hair. The cape keeps hair off the clothes, but short hairs from the neck will still find their way under the collar.

The BaByliss PRO NB1E is a narrow paddle brush with rounded tips, designed for short to shoulder-length hair. Use it for everyday detangling and straight brushing. Its narrow design easily reaches the roots, nape of the neck, and around the ears.

What it does for you

• Easily reaches narrow areas: the nape of the neck, temples, and around the ears.
• Detangles without scratching the scalp, thanks to the rounded, ball-shaped tips.
• Straight brushing for short and medium hair, as recommended by the brand.
• All-in-one: detangling, drying, straightening, and styling, according to the brand description.
• Won't slip from your hand: the handle is rubberized, with a textured matte finish.

How to use it at home

1. For detangling, start at the ends and gradually work your way up to the roots.
2. For brushing, pre-dry your hair until it is slightly damp and apply heat protection.
3. Work in sections as wide as the brush, starting at the nape of the neck.
4. Place the brush under the section at the roots and pull it toward the ends with the dryer blowing from top to bottom.
5. On the sides, hold the brush close to the head so the hair stays flat and smooth.

For what hair type

BaByliss PRO recommends it for short to shoulder-length hair of any texture that you want to wear straight and neat. On long hair, the narrow brush covers only a small area per pass; in that case, the wide NB2E version works faster. It does not create volume or curls.

Specifications

What else you need

• BaByliss PRO Levante Hair Dryer
• ETB Hair Stylesse Shield Smooth Heat Protection Spray
• 32 mm BaByliss PRO Ceramic Round Brush for curled ends
• Hair clips

ProBeauty tip. On a short haircut, brush the hair in the direction you want it to lay while drying it. This way, you won't need another styling tool afterward.

The BaByliss PRO BB1E is a large flat brush with boar bristles, designed for straight brushing and everyday styling. Use it for detangling, blow-drying, smoothing, and finishing. The boar bristles smooth and add shine, while the rubberized handle provides a secure grip.

What it does for you

• Smooths and adds shine thanks to the boar bristles.
• Achieves a straight blow-dry: the wide surface smooths the hair as you dry it.
• Helps with everyday detangling, morning or evening, on dry hair.
• Won't slip from your hand: the rubberized handle has a textured matte finish and provides a secure grip even when your hands are wet.
• Replaces several brushes: the brand describes it as an all-purpose brush for detangling, drying, smoothing, and styling.

How to use it at home

1. To detangle, start at the ends and gradually work your way up to the roots using short strokes.
2. For a straight blow-dry, pre-dry the hair with a hairdryer until it is slightly damp, then apply a heat protectant.
3. Divide the hair into sections and secure them with clips.
4. Place the brush under a section of hair at the roots and slowly pull it toward the ends. Direct the hairdryer's airflow downward, following the direction of the bristles.
5. Finally, brush through the dry hair several times to add shine.

For which hair type

Suitable for all hair types that you want to wear straight and shiny. Its wide design quickly covers large areas, making it most useful for medium- and long hair. It does not create volume at the roots or curls; choose a round brush for that.

Specifications

What else you need

• BaByliss PRO Levante Hairdryer
• Osis+ Flatliner Heat Protection Serum for smoothing
• Fibre Clinix Fibre Sealer Anti-Frizz Heat Protection
• 52 mm BaByliss PRO Ceramic Round Brush for volume

ProBeauty Tip. Use it at the end, after flat-ironing or blow-drying, on completely dry hair: a few slow strokes from the roots to the ends add shine without another pass of heat.

The BaByliss PRO NB2E is a large flat brush with rounded tips, designed for shoulder-length hair and longer. Use it for everyday detangling and straight brushing when you want smooth, sleek hair. The rubber handle with a textured matte finish won't slip from your hand.

What it does for you

• Quickly detangles long hair: the wide surface covers a lot with every pass.
• Doesn't scratch the scalp, as the bristles have rounded, ball-like tips.
• Straight, smooth brushing, as explicitly recommended by the brand.
• Helps you straighten your hair, before or after drying.
• Stays firmly in your hand thanks to the non-slip rubber handle.

How to use it at home

1. To detangle, hold the hair at mid-length and brush the ends first. Then gradually work your way up to the roots.
2. For brushing, pre-dry the hair until it is slightly damp and apply heat protection.
3. Divide the hair into wide sections that the brush can cover in one pass.
4. Place the brush underneath the section at the roots and pull it towards the ends with the dryer's airflow directed from top to bottom.
5. Finish with a pass of cool air over each section to keep the hair straight.

For what hair type

BaByliss PRO recommends it for shoulder-length to long hair, regardless of texture, if you want to wear it straight. On short hair, there isn't much to straighten over the wide surface; the narrower NB1E version is more convenient for that. It doesn't create volume at the roots or curls.

Specifications

What else you need

• BaByliss PRO Vero Hair Dryer
• Osis+ Flatliner Heat Protection Serum, for smoothing
• Wella SP Luxe Oil Hair Oil, for ends
• BaByliss PRO Flat Brush with Boar Bristles, for shine

ProBeauty tip. On long hair, detangle it with the NB2E before washing: knots come out much more easily on dry hair than on wet hair.

The BaByliss PRO CB1E is a 20 mm ceramic round brush, the thinnest in the BaByliss PRO ceramic series. Use it for detailing: the fringe, short hair, and the strands around the face and neck. The antistatic ceramic coating reduces frizz and evenly distributes the dryer's heat.

What it does for you

• Styles the fringe: it rounds it and lifts it off the forehead instead of letting it lay flat.
• Lifts the roots of short hair, where a large brush can't get a grip.
• Small, defined curls: with its 20 mm diameter, the strand wraps tightly around the brush.
• Less frizz, thanks to the antistatic ceramic coating, which hair glides over easily.
• Grips short strands: the wavy bristles hold the hair but are gentle on the scalp.
• Good control in small areas, with its non-slip rubber handle.

How to use it at home

1. Pre-dry the hair until it is almost dry and apply heat protectant.
2. Work on thin sections about the width of the brush.
3. For the fringe, place the brush over it at the roots and pull it forward with the dryer's airflow from above.
4. For small curls, wrap the strand around the brush from the ends to the roots and heat it for a few seconds.
5. Cool the curl with cool air and unroll the brush by rotating it without pulling.

For what hair type

It is suitable for short hair, pixie cuts or short bobs, as well as for the fringe and small curls on medium-length hair. On long hair, do not use it for the entire blowout: it would take a long time and long strands would get tangled around such a small diameter. In that case, choose 42 or 52 mm and keep the CB1E for finishing touches.

Specifications

What else you need

• BaByliss PRO Levante Hair Dryer
• ETB Hair Stylesse Shield Smooth Heat Protectant Spray
• Hair Clips
• 32 mm BaByliss PRO Ceramic Round Brush, for longer lengths

ProBeauty Tip. Dry the fringe first while the hair is still damp: if it dries on its own, it will take the shape it falls into and be much harder to straighten.

The BaByliss PRO CB2E is a 32 mm ceramic round brush for blow-drying. Its medium diameter makes it ideal for bobs, layered cuts, and shoulder-length hair. The ceramic coating reduces frizz and allows the hair to glide smoothly over the brush.

What it does for you

• Turned-under, rounded ends: a 32 mm brush fully wraps medium-length hair.
• Root volume: lift the hair section up the brush right from the roots.
• Smooth, faster blow-drying: the ceramic coating evenly distributes the dryer’s heat.
• Less frizz and static, thanks to the anti-static ceramic coating, which allows the hair to glide with less friction.
• Grips the hair without scratching the scalp: the curved bristles are gentle on the scalp.
• Won’t slip from your hand, thanks to the non-slip rubber handle.

How to use it at home

1. Pre-dry the hair with a dryer until it is half-dry and apply heat protection.
2. Divide the hair into sections and secure them with clips. Start at the nape of the neck.
3. Place the brush under the hair section at the roots and lift it slightly to add volume.
4. Slowly pull the brush toward the ends, directing the dryer’s airflow from top to bottom along the hair section.
5. At the ends, turn the brush inward or outward and hold for a few seconds, then release the hair section.

For what hair type

It is suitable for all hair types, from short to medium lengths, from bobs to shoulder-length hair. On long, thick hair, 32 mm covers too little in one pass, and blow-drying takes a long time. For short hair and very short sections, a smaller diameter grips better.

Specifications

What else you need

• BaByliss PRO Levante Hair Dryer
• L’Oréal Tecni.Art Flex Blowdry leave-in cream with heat protection
• Hair sectioning clips
• 20 mm BaByliss PRO ceramic round brush for short hair

ProBeauty tip. On a bob, roll the ends inward and cool them on the brush with cool air for a few seconds before releasing the hair section. The rounded shape lasts until evening.

The BaByliss PRO CB3E is a 42 mm ceramic round brush for blow-drying hair from the shoulders down. It is large enough to work quickly on the lengths, but still rolls well around the ends. The antistatic ceramic coating reduces frizz and distributes heat evenly.

What it does for you

• Brushing with movement: turned-under ends and wide waves on medium and long hair.
• Root volume, when you lift the section onto the brush right at the base.
• Faster drying: the ceramic absorbs the heat from the dryer and distributes it evenly through the section.
• Smoother hair with less frizz, because the hair glides easily over the ceramic coating with less friction.
• Gentle on the scalp: the curved bristles grip the hair well without scratching.
• Rubberized, non-slip handle, which you can hold securely throughout the brushing process.

How to use it at home

1. Pre-dry the hair until it is half-dry and apply heat protection to the lengths.
2. Divide the hair into four sections with clips and start at the nape of the neck.
3. Place the brush under a section as wide as the brush at the roots, and hold the dryer's airflow above it.
4. Pull the brush toward the ends, rotating it slightly so that the section remains stretched over the brush.
5. At the ends, roll it half a turn inward or outward and hold until dry.
6. Continue with the sides and finish with the top for volume.

For what hair type

It is suitable for hair from the shoulders to the middle of the back, of any texture. On short hair, 42 mm is too large to roll the ends; in that case, choose 32 or 20 mm. On very long and thick hair, 52 mm finishes the brushing faster.

Specifications

What else you need

• BaByliss PRO Falco Black Gold Hair Dryer
• Wella EIMI Thermal Image Heat Protection Spray
• Schwarzkopf Professional Sectioning Clips
• 52 mm BaByliss PRO Ceramic Round Brush for Very Long Hair

ProBeauty Tip. For wide waves that last, after rolling the ends, leave the brush in the hair for a few seconds until the section cools. Only then remove it, rotating it slightly outward.

The BaByliss PRO CB4E is a 52 mm ceramic round brush, the largest in the BaByliss PRO ceramic series. It is designed for quick, smooth brushing of long, thick hair, with volume at the roots. The antistatic ceramic coating reduces frizz and evenly distributes the dryer's heat.

What it does for you

• Dries long hair faster: the large diameter covers a lot of surface area with each pass.
• Smooth, almost straight brushing, with a slight curve at the ends.
• Great volume at the roots, crown, and ends.
• Less frizz, as the hair glides easily over the antistatic ceramic coating.
• Grips the hair well, with wavy bristles and a cushioned scalp.
• Keeps a secure grip, with a non-slip rubber handle.

How to use it at home

1. Pre-dry the hair until it is half-dry. Apply heat protection to the lengths.
2. Divide the hair into sections as wide as the brush and secure them with clips.
3. Place the brush under the section at the roots and lift it straight up to create volume.
4. Slowly move down toward the ends, directing the dryer's airflow from top to bottom along the hair.
5. At the ends, gently roll the brush inward for a subtle curve.
6. Finish the ends last, lifting the sections toward the back.

For what hair type

It is most useful for long, thick, or coarse hair from the shoulders down when you want a smooth, voluminous blowout. It is not suitable for short hair or bangs: there is nothing to roll. If you want curls or visibly turned-under ends, a smaller diameter will help you more.

Specifications

What else you need

• BaByliss PRO Excess HQ Hair Dryer
• Fibre Clinix Fibre Sealer Anti-Frizz Heat Protection
• Schwarzkopf Professional Sectioning Clips
• BaByliss PRO Flat Brush with Boar Bristles for Finishing

ProBeauty Tip. For a smooth blowout, keep the section taut on the brush and always point the dryer nozzle from top to bottom, parallel to the brush. The hair comes out shiny without having to pass over it again.

The BaByliss PRO Poderoso is a 2400 W hair dryer with a long-lasting digital motor and a Turbo function that increases the air speed to 186 km/h. It weighs 400 g and comes with 3 nozzles, a diffuser, and a noise reducer. It's for you if you have long or thick hair and want to dry it quickly without a heavy device in your hand.

What it does for you

• Dries quickly: 186 km/h, 96.5 m³/h airflow, and 1804 Pa pressure.
• Gives you an extra boost when you're in a hurry, with the Turbo function, activated with a button.
• Doesn't tire your hand: 400 g and 200 mm long, with a compact and balanced body.
• Reduces frizz and leaves hair shiny, thanks to ionic technology.
• Works more quietly, with the noise reducer included.
• Does both curls and smooth brushing: 150 mm diffuser with a locking system and 3 concentrator nozzles.

How to use it at home

1. Towel-dry your hair and apply heat protection to the lengths.
2. Choose one of the 2 speeds and 3 temperatures. For fine hair, start on the low setting.
3. Dry the roots first, then attach the appropriate nozzle: the 6 × 75 mm one for wide sections, the 4 × 70 mm one for precise work.
4. Work on sections, with the brush, directing the air from the roots to the ends.
5. For curls, attach the diffuser and dry on low speed, without pulling the hair with your hand.
6. Set the shape with cool air. The button can be locked, so you don't have to keep it pressed.
7. Regularly clean the removable filter on the back.

For what type of hair

It works on all hair types, because you adjust the speed and temperature separately. You'll feel it most on long, thick, or hard-to-dry hair, where the Turbo function shortens the time. For curly hair, you have the diffuser in the package.

Specifications

What else you need

• Wella EIMI Thermal Image heat protection spray
• Olivia Garden Expert Blowout Shine 55 mm round brush, for long hair
• Olivia Garden Expert Blowout Shine 35 mm round brush
• Hair clips

ProBeauty tip. Keep the Turbo function for the beginning, when the hair is wet. Towards the end, switch to low speed and cool air, to close the cuticle and preserve the shine.

The BaByliss PRO Power Definer FX672ME is a replacement blade sold for the BaByliss PRO FX672E Power Definer clipper. Out of the box, the FX672E comes with a 45 mm stainless steel blade that has been diamond-sharpened. When the blade no longer cuts cleanly, you replace it, and the clipper works like new again.

What it does for you

• It restores a clean cut, without pulling hairs or leaving them uncut.
• It extends the life of your clipper: you only replace the worn blade, not the entire device.
• It saves you a trip to the service center, because you can install it yourself.
• It preserves the clipper's length settings, provided you install the blades correctly aligned.

How to use it at home

1. Turn off the clipper and unplug it or remove it from the charging stand.
2. Release the old blade as shown in the clipper's manual, and remove the old set.
3. Position the new set with the moving blade centered and parallel to the fixed blade, then secure it in place.
4. Apply a few drops of oil to the teeth.
5. Turn on the clipper for a few seconds and check the cut on a test strand of hair.

For which type of device

It is sold for the BaByliss PRO FX672E Power Definer clipper, an older model, corded or cordless. We did not find a BaByliss PRO data sheet that lists other compatible models, so if you have a different clipper, write us the code before ordering.

What else you need

• BaByliss PRO 4-in-1 Blade Care Spray
• Wahl Oil for lubricating blades, 100 ml
• Wahl Blade Ice Spray for cooling and cleaning blades

ProBeauty Tip. Because the FX672E is an older model, keep the old blade until you check that the new one cuts cleanly. Lubricating it after every day of use extends its life.

The BaByliss PRO M4053E Barber Towel is the essential towel for the barber station. Use it to prepare the beard before edging or shaving and to clean up after a cut. It is a simple accessory that complements the BaByliss PRO tools on your table.

What it does for you

• Prepares the beard before edging or shaving, as recommended by the official distributor.
• Keeps the client's neck clean by wiping away cut hair after each pass.
• Protects the collar if placed on the shoulders under the cape.
• Completes the workstation alongside the shaver and edger.

How to use it at home

1. Place the towel on the client's shoulders under the cape before cutting.
2. For the beard, use it to prepare the area before edging or shaving.
3. Between passes, gently wipe cut hair from the neck and cheeks.
4. After each client, put the towel in the wash and use a clean one.
5. Wash it according to the instructions on the label and let it dry completely.

For what type of work

It is suitable for barbers and those who cut or style their beards at home. It does not replace the cutting cape but complements it. If you need towels for dyeing, choose ones that you do not mind getting stained.

What else you need

• BaByliss PRO FX3 Double Foil Shaver
• SkeletonFX GoldFX Edger
• Wahl Cutting Cape
• BaByliss PRO 4-in-1 Blade Spray

ProBeauty Tip. Keep at least two towels at the station, one for the beard and one for the neck. This prevents cut hair from getting back on the client's face.

BaByliss PRO Rollers 12 is a set of 12 jumbo heated rollers, 38 mm, with ceramic and titanium (CTC) technology. They give you great volume at the roots and wide, bouncy curls. The brand presents it as the set used by hairstylists at fashion shows and in studios.

What it does for you

• Great volume and wide curls, thanks to the jumbo 38 mm diameter.
• Lifts the hair from the root: the rollers are lightweight and do not pull the strand down.
• Even heat throughout the strand, thanks to Céramique Titanium technology.
• Protects the hair while rolling, with a soft, velvety surface.
• They heat up quickly: they heat up very fast, and the heat-resistant cover opens easily.
• They stay firmly on your head, with 12 butterfly clips and 12 metal pins included.

How to use them at home

1. Place the base on a stable, heat-resistant surface, close the cover, and turn on the set. The indicator light shows you that it is on.
2. While it heats up, prepare the hair: clean, completely dry, and detangled. Apply a heat protection spray.
3. Take a strand as wide as the roller and hold it straight up, perpendicular to the head.
4. Roll the strand from the ends toward the root, tightly, and secure the roller with a butterfly clip or a metal pin.
5. Continue from the crown to the sides and toward the nape. Leave the rollers on your head until they cool down.
6. Remove them carefully, without pulling, and loosen the curls with your fingers or a brush.

For what type of hair

It is suitable for any hair type, but it looks best on medium and long hair, where the 38 mm roller has room to roll the entire strand. On short hair, below the chin, the jumbo rollers are difficult to grip. It does not make small or tight curls: for that you need thinner rollers.

Specifications

What else you need

• Wella EIMI Thermal Image Heat Protection Spray
• Wella EIMI Extra Volume Volume Mousse, before rolling
• Osis+ Elastic Flexible Hairspray, for curls that last
• Schwarzkopf Professional Sectioning Clips
• Olivia Garden Nano Thermic 55 Brush, for finishing

ProBeauty Tip. For volume at the crown, roll the first rollers from the forehead toward the back, with the strand held straight up. Remove them only after they have completely cooled down, otherwise the curl will quickly fall.

Attention! The product may have an opened or damaged packaging and may show minor signs of use or small scratches that do not affect its functionality!

Experience perfect hairstyles with BaByliss PRO Rollers 12, a professional set that combines excellent performance with versatility for all hair types. Whether used in a hair salon or at home, this set is ideal for creating defined and long-lasting curls.

Features:

• Ceramic coating: Ensures even temperature distribution for easy and long-lasting curling.
• Ideal for all hair types: The set includes 3 types of rollers of different sizes, suitable for long, medium, and short hair.
• Complete accessories: Comes with 12 clips in 3 different sizes and 12 pins for easy and stable use.

Technical Specifications:

• Roller type: Ceramic
• Number of rollers: 12 pcs
• Included accessories: 12 clips in 3 different sizes, 12 pins
• Storage box: Yes, included

Package includes:

• 12 professional ceramic rollers
• 12 clips in 3 different sizes
• 12 pins
• Storage box for easy organization and protection

BaByliss PRO Rollers 20 is a set of 20 heated rollers in three sizes and three colors, with a velvet coating. Combine the large, medium, and small rollers to create curls of different sizes all over your head. The coating makes them more comfortable to use and gentler on your hair.

What it does for you

• Curls of different sizes in a single styling session: you get 8 large, 6 medium, and 6 small rollers.
• They are gentler on your hair, thanks to the velvet coating.
• You can quickly find the right size, as each size has a different color.
• You know when they are ready: one of the rollers has a heat indicator dot.
• You can securely hold them in place, with 20 metal clips in three sizes and 20 butterfly clips.

How to use them at home

1. Place the set on a stable, heat-resistant surface and turn it on. Wait until the indicator dot shows that the rollers are hot.
2. Prepare your hair: clean, completely dry, and detangled. Apply a heat protectant.
3. Place the large rollers on the crown, the medium rollers on the sides, and the small rollers at the nape of the neck and around the face.
4. Take a section of hair as wide as the roller, roll it from the ends toward the roots, and secure it with a clip or butterfly clip.
5. Leave the rollers in your hair until they cool down completely.
6. Remove them one by one without pulling and arrange the curls with your fingers.

For what hair type

Because it comes in three sizes, the set works for short, medium, and long hair. The small rollers are perfect for short sections at the nape of the neck and around the face, while the large ones add volume to the crown. If you only want very wide waves in long hair, a jumbo roller set will be more suitable.

Specifications

What else you need

• Fibre Clinix Fibre Sealer anti-frizz heat protectant
• Wella EIMI Boost Bounce curl defining foam
• Schwarzkopf Professional Silhouette hairspray
• Hair sectioning clips
• BaByliss PRO Rollers 12 jumbo roller set, for maximum volume

ProBeauty tip. Roll the side sections in alternating directions, one forward and the next backward. The curls won't stick together, and the hairstyle will look more natural.

The BaByliss PRO Rotating 800 is an 800 W hot air rotating brush with two interchangeable round heads, 40 and 50 mm. The brush rotates on its own in both directions, so you can create voluminous blowouts without having to hold a hairdryer and brush separately. It is designed for pre-dried hair, not for drying wet hair.

What it does for you

• Gives you root volume and curled ends with a single device: the hot air and rotation work together on each section.
• Suitable for several lengths: the 50 mm brush is for long hair, while the 40 mm one is for short layers and bangs.
• You choose the curl direction: the two-way rotation curls the ends inward or outward.
• Reduces frizz and static thanks to ionic technology.
• Grips the hair well, with boar and nylon bristles and epoxy-coated tips, on a ceramic-technology barrel.
• Set the style with cool air, and the rear filter opens on a hinge so you can easily clean it.

How to use it at home

1. After washing, towel-dry your hair and detangle it thoroughly. Use the brush on pre-dried, slightly damp, and completely detangled hair.
2. Attach the appropriate brush head to the device body and lock it with the button on the brush.
3. Section your hair with clips and start with the bottom sections, no wider than 2 cm.
4. Hold the section at a 90° angle to the brush. With the device on heat but without rotation, pass through it once or twice to straighten it.
5. Press the button in the desired direction and glide the brush from the roots to the ends. At the end, roll the entire section around the brush and hold for a few seconds to lift the roots.
6. Finish with a cool air jet, without rotation, so the style lasts longer.

For what hair type

It works on all hair types, from short cuts with bangs to long hair. The manual says to repeat the passes depending on the hair type, so you will need more for thick hair. It is not a solution for completely drying wet hair: in that case, you need a hairdryer first.

Specifications

What else you need

• L’Oréal Tecni.Art Flex Blowdry leave-in cream, with heat protection for blowouts
• Wella EIMI Thermal Image heat protection spray
• Olivia Garden iDetangle brush, before blowouts
• Hair sectioning clips
• 50 mm replacement brush for Rotating 800

ProBeauty tip. Occasionally rinse only the brush head under running water to remove trapped hair and product residue. Only put it back on after it has completely dried.

Warning! The product may have an open or damaged packaging and may show minor signs of use or small scratches that do not affect its functionality.

Discover BaBylissPro Rotating 800, the professional rotating hot air brush that allows you to create stunning hairstyles in just a few minutes! With a power of 800 W, this device is ideal for long or medium hair, providing salon-like results right at home, thanks to its advanced ionic technology.

Key Features:

• Two brush sizes (40 mm and 50 mm) – The 50 mm brush provides volume and structure, while the 40 mm brush is perfect for waves and curls.
• Anti-static ionic technology – Eliminates static electricity, leaving hair smooth and frizz-free.
• 2 temperature settings and cool air function – Allows temperature adjustment for personalized styling and hair protection.
• Boar and nylon bristles – Designed to smooth and care for hair, giving it a healthy and shiny appearance.

Why choose BaBylissPro Rotating 800?

• High versatility – Easy to use for various styles, from smooth and shiny hair to rich curls or volume.
• Effortless styling – Easily combs and styles even long strands, ensuring a flawless finish without frizzy hair.
• Suitable for professionals and home use – Recommended for both salons and personal use, offering a professional styling experience.

The BaByliss PRO Rotating 800 Replacement Round Brush 13827701 is the 50 mm head for the Rotating 800 rotating brush. Use it when the old brush has worn out, become deformed, or been lost. It restores your device’s ability to create volume when brushing long hair without having to buy a new device.

What it does for you

• Replace only the worn part, not the entire device.
• Volume brushing for long hair: the 50 mm head is the brand’s recommended size for longer lengths.
• Grips the hair well, with boar and nylon bristles and epoxy tips.
• Ceramic technology on the brush tube, just like the original head that comes in the box.
• Easy to clean: the brush head can be rinsed under water.

How to use it at home

1. Turn off the Rotating 800, unplug it, and let it cool down.
2. Unlock the old head using the button on the brush and gently pull it off the device body.
3. Slide the new brush onto the device body.
4. Lock it in place using the button on the top of the brush.
5. Check that it is securely attached before turning on the rotation.

For which type of device

It is for the BaByliss PRO Rotating 800, BAB2770E rotating brush. It is not a hand brush and is not compatible with the Air Styler or other hot air brushes. If you need a head for bangs and short layers, that is the 40 mm one.

Specifications

What else you need

• BaByliss PRO Rotating 800 rotating brush, the compatible device
• L’Oréal Tecni.Art Flex Blowdry leave-in cream, with heat protection
• Wella EIMI Thermal Image heat protection spray
• Hair sectioning clips

ProBeauty tip. When brushes start to bend or no longer grip the hair well, it is time to replace the head. A worn brush makes you go over the same section of hair multiple times, exposing it to more heat.

BaByliss PRO FXPCGE is a set of 8 guide combs for FX8700, FX825, and FX895E hair clippers. They cover lengths from 1.5 to 19 mm, so you can work from short fades to longer haircuts. They are made of glass-fiber-reinforced nylon and attach to the clipper with a metal clip.

What they do for you

• Cut uniformly at the chosen length, with 8 settings: 1.5, 3, 4.8, 6, 10, 13, 16, and 19 mm.
• Stay firmly on the clipper: the metal clip holds each guide comb securely in place so it won't slip during cutting.
• Withstand daily use: glass-fiber-reinforced nylon is lightweight and wear-resistant.
• Create gradual fade transitions, with settings from 0.5 to 6.
• They also fit other clippers: the brand states that they fit most blades with 2 mounting holes.

How to use them at home

1. Turn off the clipper and clear hair from the blade.
2. Choose the guide comb according to the desired length from the table below.
3. Place the guide comb over the blade and press until the metal clip snaps into place.
4. Check that it is securely attached before turning on the clipper.
5. Move the clipper through the hair in even strokes without pressing the guide comb into the scalp.
6. After cutting, remove the guide comb, brush off the hair, and store the set in a safe place.

For what type of device

BaByliss PRO says that the set fits all FX8700 models, plus FX825 and FX895E, and most clipper blades with 2 mounting holes. If you have a different clipper, check how the blade is attached first. They are not designed for trimmers.

Specifications

What else you need

• BaByliss PRO Boost+ Gold hair clipper from the FX8700 series
• BaByliss PRO Boost+ Chameleon hair clipper from the FX8700 series
• BaByliss PRO SnapFX FX895E hair clipper
• BaByliss PRO FX4in1 spray for blade maintenance
• Wahl oil for hair clipper blades

ProBeauty tip. When fading, always go up one setting at a time: from 3 to 4.8 mm, then to 6 mm. Jumping directly from 3 to 6 mm leaves a visible line between sections.

BaByliss PRO SkeletonFX 35078700 is a replacement blade sold for SkeletonFX FX7870 foil shavers. Code 35078700 is a spare part code, and the brand does not publish a separate data sheet for it. Therefore, check your device model before ordering.

What it does for you

• It brings back a clean cut when the old blade no longer catches the hair on the first pass or pulls the hair.
• It saves you a service visit: on the SkeletonFX, the blade set is attached with screws and you can replace it yourself.
• It keeps your device working: you only replace the worn blade, not the entire foil shaver.
• It is easy to maintain: the brand recommends a few drops of lubricating oil before each use.

How to use it at home

1. Turn off the device and unplug it.
2. Turn it upside down with the blade teeth facing down and place it on a flat surface.
3. Loosen the mounting screws with a screwdriver and remove the old blade set.
4. Place the new set on the head, with the foil axis aligned in the moving blade.
5. Put the screws back in place, tighten them slightly, align the blades parallel to the housing, and only then tighten them completely.
6. Put a few drops of oil on before turning on the device.

For what type of device

It is sold for SkeletonFX FX7870 foil shavers. I did not find a BaByliss PRO source linking code 35078700 to other models. If you have a SnapFX, LO-PROFX, or another device, choose a blade with brand-published compatibility, such as FX707ZE, which covers the entire FX7870 series, plus FX797E and FX726.

What else you need

• SkeletonFX FX707ZE blade, with brand-published compatibility
• BaByliss PRO 4-in-1 spray for blade maintenance
• Wahl oil for blade lubrication, 100 ml
• Wahl Blade Ice spray for cooling and cleaning blades

ProBeauty tip. Before ordering, look at the label under the device: if it says FX7870, you are on the right series. Keep the old blade until you check that the new one cuts cleanly.

BaByliss PRO SkeletonFX FX707ZE is the replacement blade for SkeletonFX FX7870 trimmers. It features a 40 mm T-blade with 1.6 mm standard teeth for clean lines on any hair texture. You can install it with a screwdriver in just a few minutes when the old blade no longer cuts cleanly.

What it does for you

• Cleanly trims lines, details, and shapes thanks to the 40 mm T-blade designed for precision work.
• Adjusts to a zero-gap setting, so you can work very close to the skin.
• Combines two materials: the fixed blade is made of titanium, while the moving cutting blade has a DLC coating.
• Works on any hair texture and skin sensitivity, according to the brand, thanks to the standard teeth.
• Fits multiple devices: FX797E, all FX7870 and FX726 models, plus 2-hole blade systems.

How to use it at home

1. Turn off the device and unplug it.
2. Turn it upside down with the blade teeth facing down and place it on a flat surface.
3. Loosen the mounting screws with a screwdriver and remove the old blade set.
4. Place the new set on the head, aligning the pivot pin with the moving blade.
5. Put the screws back in place, tighten them lightly, turn the device over, and align the blades parallel to the housing. Only then tighten them completely.
6. Apply a few drops of lubricating oil before turning on the device.

For what type of device

It fits SkeletonFX FX7870 trimmers, including the GunSteel, Gold, and Boost+ versions, as well as the SnapFX FX797E and LO-PROFX FX726. The brand says it also works with other devices featuring a 2-hole blade system. It is not for FX8700 clippers, which use 45 mm blades.

Specifications

What else you need

• BaByliss PRO 4-in-1 Blade Care Spray
• Wahl Blade Oil, 100 ml
• BaByliss PRO SkeletonFX GunSteel FX7870GSE Trimmer
• BaByliss PRO SkeletonFX Gold FX7870GE Trimmer
• Wahl Blade Ice Spray for cooling and cleaning blades

ProBeauty tip. After installation, turn on the device for a few seconds and look at the blade from the side. If the moving blade extends beyond the fixed blade, loosen the screws and realign it before it touches the skin.

BaByliss PRO SkeletonFX FX707BD2E is a 40 mm T-blade replacement blade with 2 mm deep teeth and a black DLC coating. Use it with SkeletonFX FX7870, SnapFX FX797E, and LO-PROFX FX726 trimmers. It is designed for clean lines and detailing on thick hair.

What it does for you

• Creates clean outlines and sharp lines thanks to its 2 mm deep teeth.
• Cuts through thick or coarse hair where fine-tooth blades can easily clog.
• Glides more easily: the DLC (Diamond Like Carbon) coating is wear-resistant and reduces friction.
• Adjusts to zero-gap for trimming very close to the skin.
• Fits multiple devices: FX797E, all FX7870 and FX726 models, plus 2-hole blade systems.

How to use it at home

1. Turn off the trimmer.
2. Remove the old blade with a screwdriver.
3. Place the new blade on the trimmer and make sure it is correctly positioned, parallel to the housing.
4. Tighten the screws and turn on the trimmer for a few seconds to ensure the blade runs smoothly.
5. Clean and lubricate the blade regularly, before and during use, with BaByliss PRO 4-in-1 spray, as recommended by the brand.

For which type of device

It fits SkeletonFX FX7870, SnapFX FX797E, and LO-PROFX FX726 trimmers, plus other devices with a 2-hole blade system. The brand recommends it for thick or coarse hair and less sensitive skin. If you frequently work on sensitive skin, a blade with standard 1.6 mm teeth, such as the FX707ZE, is more suitable.

Specifications

What else you need

• BaByliss PRO Boost+ SkeletonFX Gold FX7870GBPE Trimmer
• BaByliss PRO SkeletonFX GunSteel FX7870GSE Trimmer
• BaByliss PRO 4-in-1 Blade Care Spray
• Wahl Blade Lubricating Oil, 100 ml

ProBeauty tip. Use this blade for outlining and detailing, and on areas with thin skin, such as the neck, work with short strokes and without applying pressure.

The BaByliss PRO SkeletonFX FX707G2ZE is a 40 mm gold titanium-coated T-blade with 2 mm deep teeth. Use it with the SkeletonFX FX7870, SnapFX FX797E, and LO-PROFX FX726 trimmers. It is designed for clean outlines, sharp lines, and detailing.

What it does for you

• Creates clean outlines and sharp lines thanks to its 2 mm deep teeth.
• Stays sharp longer: titanium is a hard, durable coating, according to the brand.
• Is gentler on sensitive skin because titanium has hypoallergenic properties.
• Cuts through thick or coarse hair when working on edges and details.
• Adjusts to a zero-gap setting for trimming very close to the skin.

How to use it at home

1. Turn off the trimmer.
2. Remove the old blade with a screwdriver.
3. Place the new blade on the trimmer and make sure it is positioned correctly, parallel to the housing.
4. Tighten the screws and turn on the trimmer for a few seconds to make sure it runs smoothly.
5. Clean and lubricate the blade regularly, before and during use, with BaByliss PRO 4-in-1 spray.

What type of trimmer it is for

It fits the SkeletonFX FX7870 trimmers, including Gold and Boost+ Gold, SnapFX FX797E, and LO-PROFX FX726, as well as other trimmers with a two-hole blade system. The brand recommends it for thick or coarse hair and less sensitive skin. It is not for hair clippers with a 45 mm blade.

Specifications

What else you need

• BaByliss PRO SkeletonFX Gold FX7870GE Trimmer
• BaByliss PRO Boost+ SkeletonFX Gold FX7870GBPE Trimmer
• BaByliss PRO 4-in-1 Blade Care Spray
• Wahl Blade Lubricating Oil, 100 ml

ProBeauty Tip. The FX707G2ZE maintains the gold appearance of the SkeletonFX Gold trimmer. Keep it on hand as a spare blade for sharp lines and beard trimming.

The BaByliss PRO SkeletonFX Graphite FX707B2ZE T-Blade is a 40 mm replacement T-blade with a 2.0 mm deep tooth, designed for BaByliss PRO outline trimmers. It is zero-gap adjustable and made for clean outlines, sharp lines, and fine details. The brand recommends it for thick or coarse hair.

What it does for you

• Clean outlines and precise lines with a 40 mm zero-gap adjustable T-blade.
• Easily cuts through thick hair: the 2.0 mm deep tooth is designed for thick and coarse hair.
• Heats up less: the brand says that graphite has very low friction and keeps the blade cooler.
• Lasts a long time because the Graphite coating is very durable.
• Fits multiple devices on any blade system with 2 screws.

How to use it at home

1. Turn off the outline trimmer.
2. Unscrew the screws with a screwdriver and remove the old blade.
3. Place the new blade and check that it is in the correct position, then tighten the screws.
4. Adjust the zero-gap only if you know how, with the moving blade slightly below the fixed one.
5. Clean and maintain the blade with the FX4in1 spray before and during use.

For what type of device

The brand lists it as compatible with the LO-PROFX FX726E trimmer, all FX7870 metal outline trimmers, and any device with a blade held by 2 screws. If you have sensitive skin, choose a blade with a standard tooth.

Specifications

What else you need

• SkeletonFX Gunsteel FX7870GSE Outline Trimmer
• SkeletonFX GoldFX FX7870GE Outline Trimmer
• BaByliss PRO FX4in1 Spray, Recommended by the Brand
• Wahl Blade Oil

ProBeauty Tip. Keep the old blade until you check that the new one cuts well. If it pulls the hair or pricks the skin, the zero-gap adjustment is incorrect and needs to be redone.

BaByliss PRO SkeletonFX FX707ZGSE is a 40 mm T-blade replacement made from Japanese steel for the SkeletonFX GunSteel FX7870GSE trimmer. It features standard 1.6 mm teeth for clean cuts on any hair texture. It is also compatible with other FX7870 models, the SnapFX FX797E, and the LO-PROFX FX726.

What it does for you

• Cleanly trims edges, details, and shapes with its 40 mm T-blade.
• Cuts powerfully and stays sharp: Japanese steel is a durable metal with excellent cutting power.
• Resists rust and corrosion, according to the brand.
• Works on any hair texture and suits all skin sensitivities thanks to its standard teeth.
• Adjusts to a zero-gap setting for trims very close to the skin.

How to use it at home

1. Turn off the trimmer and unplug it.
2. Turn it over with the blades facing down and place it on a flat surface.
3. Use a screwdriver to remove the screws holding the blades and take out the old blade set.
4. Place the new blade set on the head, aligning the pivot screw with the moving blade guide.
5. Replace the screws without tightening them fully, turn the trimmer over, and align the blades. Then tighten.
6. Clean and lubricate the trimmer regularly with lubricating oil.

Compatible trimmer types

This is a replacement blade for the SkeletonFX GunSteel FX7870GSE and is compatible with all FX7870 models, the SnapFX FX797E, and the LO-PROFX FX726, as well as other trimmers with a two-hole blade system. It is not for trimmers with a 45 mm blade.

Specifications

What else you need

• BaByliss PRO SkeletonFX GunSteel FX7870GSE trimmer
• BaByliss PRO SkeletonFX Gold FX7870GE trimmer
• BaByliss PRO 4-in-1 blade maintenance spray
• Wahl blade lubricating oil, 100 ml
• Wahl Blade Ice spray for cooling and cleaning blades

ProBeauty tip. Japanese steel is corrosion-resistant, but hair and product residue can still retain moisture. Brush the blade after each client and apply a drop of oil at the end of the day.

The BaByliss PRO SkeletonFX FX707C2ZE is a 40 mm titanium-coated T-blade with 2 mm deep teeth. The brand presents it as the ChameleonFX version of the Titanium 2.0 blade. You use it on the SkeletonFX FX7870, SnapFX FX797E, and LO-PROFX FX726 trimmers.

What it does for you

• Stays sharp longer: titanium is a hard and durable coating, says the brand.
• Creates clean contours and smooth lines, thanks to the 2 mm deep teeth.
• Cuts well through thick or coarse hair, where you work on details and edges.
• Adjusts to zero-gap, for trimming very close to the skin.
• Fits multiple devices: FX797E, all FX7870 and FX726 models, plus 2-hole blade systems.

How to use it at home

1. Turn off the trimmer.
2. Remove the old blade with a screwdriver.
3. Place the new blade on the device and check that it is in the correct position, parallel to the housing.
4. Tighten the screws and turn on the device for a few seconds to make sure it runs smoothly.
5. Clean and lubricate the blade regularly, before and during use, with the BaByliss PRO 4 in 1 spray.

For what type of device

It fits the SkeletonFX FX7870 trimmers, including Boost+ Chameleon, SnapFX FX797E, and LO-PROFX FX726, plus other devices with a 2-hole blade system. The brand recommends it for thick or coarse hair and less sensitive skin. It is not for 45 mm blade clippers.

Specifications

What else you need

• BaByliss PRO Boost+ Chameleon SkeletonFX FX7870IBPE Trimmer
• BaByliss PRO SkeletonFX Gold FX7870GE Trimmer
• BaByliss PRO 4 in 1 Blade Care Spray
• Wahl Oil for blade lubrication, 100 ml

ProBeauty tip. If you have a SkeletonFX Boost+ Chameleon, keep the FX707C2ZE as a spare blade: it has the same deep-tooth shape as the blade you already use.

BaByliss PRO SkeletonFX GoldFX is a contour trimmer from the 4Artists line, with an all-metal gold casing and a 40 mm DLC/Titanium T-blade. The blade is exposed at 360°, so you can see the line from any hand position. It is for hairdressers and for those who trim their own contours and beards at home.

What it does for you

• See exactly where you cut: no casing covers the blade, so the line at the neck or beard remains visible.
• Cut cleanly and close to the skin, with the DLC/Titanium blade adjustable to zero-gap with the included tool.
• The blade stays cooler: the brand says that the exposed blade does not retain heat, and the DLC/Titanium layer works at a lower temperature.
• About 120 minutes cordless after 3 hours of charging, and when it runs out of battery you can work with a cord.
• Constant speed, with the digital EDM Technology motor at 7200 blade movements per minute.

How to use it at home

1. Before the first use, charge it for 3 hours uninterrupted. Maximum capacity appears after 3 charge and discharge cycles.
2. With the switch on 0, put a drop of the included oil on the blades and wipe off the excess.
3. Charging: connect the plug to the base of the machine and the adapter to the outlet. The LED flashes, and when it stays continuously lit, the battery is full.
4. Turn it on, then trace the line with the corner of the blade, in short movements, on dry and combed hair.
5. After use, clean the wires with the brush, put a few drops of oil and mount the blade protection cap.

For what type of work

It is suitable for contours at the neck and temples, the beard line, details around the ears, hair tattoos and fine lines. It does not have guide combs and is not made for shortening hair on the head; for that you use a hair clipper.

Specifications

What else you need

• BaByliss PRO 4 in 1 spray for daily blade cleaning
• Wahl oil for blades
• FX707ZE replacement blade, 40 mm T-blade
• Titanium T-blade with 2.0 mm deep tooth FX707G2ZE
• FX7870GBPBASE charging station for SkeletonFX
• Wahl haircutting cape

ProBeauty tip. When you redo the zero-gap, leave the black blade teeth 0.5–1 mm below the edge of the gold blade, as shown in the manual. Test on a small area of skin before the full contour.

Attention! The product may have an opened or damaged packaging and may show minor signs of use or small scratches that do not affect its functionality!

BaByliss PRO Skeleton FX Gold Trimmer 4artists - Precision and Professional Performance

The BaByliss PRO SkeletonFX Gunsteel is an edger from the 4Artists line, with a 40 mm Japanese steel T-blade exposed along its entire length. See exactly where you cut from any angle, so hairline, beard, and hair designs come out clean. It works corded or cordless and comes with a charging stand.

What it does for you

• See the line you cut: the T-blade is exposed 360°, without a housing that blocks your view.
• Cut very close to the skin, because the blade adjusts to zero-gap with an included tool, without having to disassemble it.
• Work for about 120 minutes cordlessly after 3 hours of charging. A quick 30-minute charge gives you about 30 minutes of work.
• Always know how much you have left: the red LED flashes when there are approximately 10 minutes of battery life left.
• Keeps up with thick hair, with the EDM Technology digital motor at 7200 blade movements per minute.

How to use it at home

1. Before first use, charge it continuously for 3 hours. The battery reaches maximum capacity after 3 full charge and discharge cycles.
2. With the switch on 0, put a drop of oil on the blades and wipe off the excess with a dry cloth.
3. Work on dry and combed hair. For straight lines at the neck and temples, gently support the corner of the blade on the skin.
4. Around the ear and on the beard line, make short passes and check the line from the side after each pass.
5. At the end, remove the hair with the included brush and put a few drops of oil on the blades.
6. Place it in the stand with the switch on 0, so it charges.

For what type of work

It is designed for finishing: the hairline and temples, the beard line, the edges around the ears, designs and fine lines in short hair. It does not have guide combs, so you do not cut all your hair with it; for that you need a hair clipper.

Specifications

What else you need

• BaByliss PRO 4-in-1 spray for cleaning and cooling the blades
• Wahl oil for hair clipper blades
• Titanium T-Blade with 2.0 mm deep tooth FX707C2ZE, for FX7870
• Carbon finishing comb
• Wahl cutting cape

ProBeauty tip. The manual limits direct plug-in use to 20 minutes. If the battery ran out in the middle of an edging, put the machine in the stand for 30 minutes: it gives you about 30 minutes of work.

Discover the BaByliss PRO SnapFX Cordless Clipper - Professional Performance at Your Fingertips

The BaByliss PRO SnapFX clipper is the ideal high-performance tool for achieving professional haircuts, whether you're at home or in a salon. Combining advanced technology with an ergonomic design, this clipper allows you to create precise and uniform hairstyles with ease and comfort.

Key Features:

• Powerful Brushless Motor: Equipped with a digital brushless motor, this clipper offers a powerful torque of 6800RPM, ensuring power and speed for precise and efficient cuts.
• Fast Charging and Dual Battery System: The two lithium-ion batteries fully charge in just 3 hours when placed together on the charging stand. Additionally, a single battery charges in just 2 hours, ensuring you'll never run out of power. Each battery provides 2 hours of runtime, guaranteeing continuous and uninterrupted operation.
• Robust and Ergonomic Design: The robust metal construction is built to last, while the ergonomic and balanced design provides a perfect grip and excellent control.
• High-Precision DLC Fade Blade: The sharp black DLC blade is ideal for fades and precise cuts. Adjustable to zero gap and equipped with a smart opening system, it allows for quick and easy maintenance.

Benefits of the BaByliss PRO SnapFX Clipper:

• Power and Speed: The digital brushless motor delivers superior performance, ensuring fast and precise cuts for any hair type.
• Unlimited Runtime: Thanks to the dual interchangeable battery system, you will benefit from continuous, uninterrupted runtime. One battery charges while the other is in use, giving you a worry-free clipping experience.
• Ergonomic and Durable Design: The robust and ergonomic construction offers comfort and long-term durability, making it ideal for intensive daily use.
• Maximum Versatility: With a complete set of comb attachments and an adjustable blade, this clipper is perfect for any haircut style, from classic cuts to complex fades.

Technical Specifications:

• Runtime: Each battery provides 2 hours of use.
• Charging Time: 2 hours for a single battery, 3 hours for both batteries on the charging stand.
• Fade Blade: Adjustable to zero gap, with smart opening system for easy maintenance.
• Battery System: Two interchangeable lithium-ion batteries.
• Light Indicator: Light ring for battery charge level (solid blue for full battery, flashing blue for low battery, flashing red for almost discharged battery).
• Adjustment Lever: 5 detent cutting positions: 0.8, 1.4, 2, 2.8, 3.5mm.
• Metal Construction: Robust, ergonomic, and balanced design, with a textured cylindrical handle for a perfect grip.
• Comb Attachment Set: 8 premium comb attachments (0.5, 1, 1.5, 2, 3, 4, 5, 6mm) with fiberglass for durability and metal clips for secure fastening.

Purchase the BaByliss PRO SnapFX

Unleash your creativity and showcase your talent with the BaByliss PRO SnapFX. Exceptional cutting performance and unlimited runtime take the art of hairdressing to the next level. Don't miss the opportunity to offer your clients the best results and elevate your services to a superior professional level.

Babyliss Pro 4-in-1 Spray for Hair Clipper Maintenance

Babyliss Pro 4-in-1 Spray was specially designed for the protection and maintenance of hair clippers and trimmers. It has a multi-action formula that extends the life of your clippers. This innovative spray is recommended for use before, during, and after using hair clippers.

Benefits:

-Lubricates

-Cleans

-Protects

-Cools the blades

How to use: Spray before, during, and after use on and between the clipper blades from a distance of 5-10cm. Leave the clipper running for 10-15 seconds for proper lubrication.

Styling with elegance, precision, and professional protection

Redefine your straightening routine with BaBylissPRO 4Artists Stilista, a state-of-the-art styling tool, precisely manufactured in Italy. Equipped with advanced Full Wave Thermal Science technology, this professional flat iron provides constant temperature, perfect finishes, and protection against hair damage.

Technical specifications:

• 25 mm x 110 mm titanium plates – ultra-smooth glide and uniform heat distribution
• Digital temperature control – 5 adjustable settings between 150°C and 230°C, with smart memory function
• Active ion technology – eliminates frizz and provides intense shine
• Ergonomic design – heat-resistant casing (Ryton), professional swivel cord, and automatic shut-off

Package contents:

• BaBylissPRO 4Artists Stilista Flat Iron (BAB3550E)
• Heat-resistant protective pouch
• User manual

Major benefits:

• Smooth and shiny finish with anti-frizz effect
• Temperature memory – retains the last setting for quick styling
• Ideal for all hair types, including chemically treated
• Versatile – ideal for straightening, curling, or adding volume

Choose BaBylissPRO Stilista for professional results right at home – fast, safe, and effective!

The BaByliss PRO Stylist is a hair straightener made in Italy, with ultra-gliding 25 × 110 mm titanium plates, here in the black and silver version. It reaches 220 °C in 40 seconds and has a cool-touch housing, so you can easily get close to the roots. Use it for straight hair, waves, or curls.

What it does for you

• Ready to style in 40 seconds: the Advanced Ceramics system heats up twice as fast as other BaByliss PRO plates, according to the brand.
• Glides smoothly without pulling the hair: the titanium plates are ultra-gliding and conform to the hair strand.
• Reduces frizz with anti-frizz ionic technology.
• Remembers the last temperature, so you don't have to set it every time.
• Lets you work close to the roots: the housing stays cool, and the curved shape helps you create waves and curls.
• Shuts off automatically after 60 minutes.

How to use it at home

1. Start with clean, completely dry hair and apply heat protection to the lengths.
2. Turn on the straightener and choose one of the 5 digital settings, between 150 and 230 °C. For fine or color-treated hair, start at 150 °C.
3. Secure the top section of hair with clips and work on thin strands, from the nape of the neck upwards.
4. Gently pull the straightener from the roots to the ends in one continuous motion.
5. For waves, close the straightener around the strand, twist it half a turn, and slowly lower it.
6. Finally, turn off the straightener, let it cool down, and put the silicone plate protectors on before putting it in the case.

For what hair type

It works on all hair types, from fine to thick, because you can choose the temperature between 150 and 230 °C. The 25 mm plates work precisely at the roots and quite quickly on the lengths. It has universal voltage, so you can take it with you on trips outside Europe.

Specifications

What else you need

• Kérastase Chroma Absolu heat protection serum, for color-treated hair
• Wella EIMI Thermal Image heat protection spray
• Hair sectioning clips
• BaByliss PRO flat brush

ProBeauty tip. Since it remembers the last setting, check the temperature before you start if someone else in the house uses the straightener. A setting left at 230 °C is not suitable for fine or bleached hair.

The BaByliss PRO Straight-Definer is a lightweight hair straightener with 25 mm EP Technology 5.0 plates and 5 temperature settings between 130 and 210 °C. It heats up quickly, works on all hair lengths and types, and, thanks to its rounded shape, can also create curls or waves. It is a simple, reliable straightener for everyday use.

What it does for you

• Lets you get started quickly: it heats up fast, so you save time and energy.
• Glides easily through hair: the EP Technology 5.0 plates have a layer of very fine metal particles that reduces friction.
• Heats evenly across the entire surface of the plates, so you finish faster and your hairstyle lasts longer.
• Starts at a gentle 130 °C, ideal for fine or fragile hair.
• Won't tire your hand: the brand describes it as very lightweight.
• Can also create curls or waves thanks to its rounded design.

How to use it at home

1. Wash your hair and dry it completely. Apply heat protectant to the lengths.
2. Turn on the straightener using the power button; the indicator light shows that it is on.
3. Choose the temperature setting: start with 130 or 150 °C for fine or color-treated hair, and only increase it if the hair does not straighten.
4. Secure the top section of hair with clips and work in thin sections, from the nape of the neck to the ends.
5. Move the straightener from the roots to the ends in a slow, continuous motion.
6. Finally, turn off the straightener, unplug it, and let it cool on a heat-resistant surface.

For which hair type

The brand says that the 5 temperature settings make it suitable for all hair lengths and types. The maximum setting is 210 °C, which is lower than on straighteners that reach 230 °C. If you have very curly and resistant hair, a model that reaches 230 °C will be more useful for you.

Specifications

What else you need

• Puring My Living Heat Protectant Spray
• Wella EIMI Thermal Image Heat Protectant Spray
• Hair Sectioning Clips
• ETB Hair Detangling Brush

ProBeauty tip. For fine hair, 150 °C is usually sufficient with the Straight-Definer. If you need more, increase to 160 °C first, not directly to 210 °C.

The BaByliss PRO Styler is a hair straightener with 28 × 110 mm floating EP Technology plates, an ion generator, and 5 temperature settings between 150 and 230 °C. It has a curved profile, so it straightens hair and also creates curls or waves. It is for you if you want a single iron for straight hair, waves, and curls.

What it does for you

• Glides easily through hair: the EP Technology plates distribute heat evenly and reduce friction.
• Reaches close to the roots with floating edge-to-edge plates, and smooths hair in fewer passes.
• Reduces static and frizz with its ion generator.
• Heats up quickly: it heats up in 25 seconds with its ceramic heating element.
• Creates both curls and waves thanks to its curved profile.
• Shuts off automatically after 20 minutes.

How to use it at home

1. Use only on completely dry, combed hair with a heat protectant applied.
2. Choose the temperature: 150 or 170 °C for fine or bleached hair, 190 °C for normal hair, and 210 or 230 °C for thick, coarse hair.
3. Divide the hair into sections and secure them with clips.
4. To straighten, pass the iron slowly once from the roots to the ends.
5. For curls, take a section, twist the iron half a turn, and slowly pull it toward the ends.
6. Place it on the heat-resistant mat included in the package until it cools down.

For what hair type

It works on all hair types because you can choose from 5 temperature settings. The 28 mm width is convenient for short, medium, and long hair. If you have very long and thick hair, the 38 mm Styler Wide covers more hair in a single pass.

Specifications

What else you need

• Wella EIMI Thermal Image Heat Protectant Spray
• Hair clips
• Olivia Garden NanoThermic Paddle Flat Brush

ProBeauty tip. For curls that last, let the section cool in your palm for a few seconds before releasing it.

The BaBylissPRO Styler Wide is a hair straightener with 38 × 110 mm EP Technology floating plates, an ion generator, and 5 temperature settings between 150 and 230°C. Its curved profile straightens hair and can also create curls or waves. It is ideal for long or thick hair and helps you get ready faster.

What it does for you

• Glides easily through hair: the EP Technology plates distribute heat evenly and reduce friction.
• Reaches close to the roots with edge-free floating plates and smooths hair in fewer passes.
• Reduces static and frizz with its ion generator.
• Heats up quickly: it is ready in 25 seconds thanks to its ceramic heating element.
• Creates large curls and waves thanks to its curved profile.
• Switches off automatically after 20 minutes.

How to use it at home

1. Use only on completely dry, detangled hair with a heat protectant applied.
2. Choose the temperature: 150 or 170°C for fine or bleached hair, 190°C for normal hair, and 210 or 230°C for thick, resistant hair.
3. Divide the hair into sections and secure them with clips.
4. To straighten, pass the plates slowly once from the roots to the ends.
5. To curl, take a section, twist the plates half a turn, and slowly pull them toward the ends.
6. Place it on the heat-resistant mat included in the package until it cools down.

For which hair type

It is suitable for all hair types, as you can choose from 5 temperature settings. The wide 38 mm plates are designed for long, thick hair, straightening it in fewer passes. For short hair or bangs, the 28 mm Styler version is easier to handle.

Specifications

What else you need

• Wella EIMI Thermal Image Heat Protectant Spray
• Hair clips
• Olivia Garden NanoThermic Paddle Brush

ProBeauty tip. For thick hair, take sections no wider than the plates and no thicker than one finger. The heat will be distributed evenly, and you won't need to go over the same section twice.

BaByliss PRO The Straightener Hair Straightener

Experience the power and efficiency of the professional BaByliss PRO The Straightener, designed to achieve straight, smooth, and shiny hair, while maintaining its health and beauty.

Equipped with ultra-smooth EP TECHNOLOGY 5.0 plates, this straightener allows for effortless gliding. Advanced Ionic Technology eliminates frizz and static electricity, giving your hair a silky and shiny appearance.

Features

• Plate Dimensions: 28mm x 110mm, EP TECHNOLOGY 5.0
• Ionic Technology: For smooth and shiny hair
• Advanced Heat Management System™️: For fast heating and precise temperature control
• Temperature Selector: With 5 settings (150°C – 170°C – 190°C – 210°C – 230°C)
• On/Off Button and Digital Display: For simple operation and precise control
• Professional Swivel Cord: 2.70m for maximum freedom of movement

Advanced Functions

• Advanced Heat Management: For instant heating and precise temperature control
• 28mm Plates: For treating large sections of hair
• Temperature Adjustment: From 150°C to 230°C, suitable for all hair types
• Advanced Ionic Technology: Eliminates frizz and static electricity for perfectly smooth hair

Safety and Comfort

• Digital Temperature Display: For precise and simple control
• Resistant Insulating Material: For maximum comfort during use

Transform your hair care routine with BaByliss PRO The Straightener and enjoy straight, shiny, and healthy hair, achieved quickly and professionally right at home or in the salon.

BaByliss PRO Titanium Fade FX8010CME is a 45 mm titanium-coated replacement fade blade for FX8700, LO-PROFX FX825, and SnapFX FX895E clippers. The cutting surface is flat and elongated for vertical movement. It is ideal for fades and clean transitions.

What it does for you

• Cuts cleanly and precisely across its entire 45 mm width.
• Stays sharp longer: titanium is a hard, durable coating, according to the brand.
• Is gentler on sensitive skin thanks to titanium's hypoallergenic properties.
• Makes vertical movement easier when fading, thanks to its flat, elongated surface.
• Adjusts to zero-gap for very short cuts.

How to use it at home

1. Turn off the clippers and move the fine adjustment lever on the left to the top position.
2. Loosen the screws with a screwdriver and set them aside.
3. Lift the old moving blade slightly and replace it with the new one on the oscillator.
4. Place the new fixed blade with the moving blade centered and parallel to it to avoid injury.
5. Secure the screws back in place.
6. Clean and maintain the blade regularly with BaByliss PRO 4-in-1 spray before and during use.

For which type of clipper

It fits clippers in the FX8700 series (ChromFX, Boost+), LO-PROFX FX825, and SnapFX FX895E, as well as other clippers with a two-hole blade system. It is not for SkeletonFX trimmers, which use 40 mm T-blades.

Specifications

What else you need

• BaByliss PRO Boost+ Metal Chameleon FX8700IBPE Clippers
• BaByliss PRO SnapFX FX895E Clippers
• BaByliss PRO 4-in-1 Blade Care Spray
• Wahl Blade Lubricating Oil, 100 ml

ProBeauty Tip. Hold the clipper almost perpendicular to the head when working on the transition area: the flat surface of the fade blade cuts most evenly with a vertical, bottom-to-top motion.

The BaByliss PRO Triple Barrel Waver is a three-barrel waver with 22, 19, and 22 mm barrels for creating S-shaped waves. It makes it easy to achieve beach waves or glamorous ’50s waves. The barrels feature a Titanium-Tourmaline coating, and you can choose from 5 temperature settings, from 140 to 220 °C.

What it does for you

• Creates S-shaped waves quickly: clamp the three barrels onto a section of hair, and the wave is formed with a single press.
• Distributes heat evenly and consistently thanks to the Titanium-Tourmaline coating, which protects the hair fiber.
• Choose the temperature for your hair using the temperature dial: 140, 160, 180, 200, or 220 °C.
• Work safely: cool tip, integrated stand, and locking system for storage.
• Shuts off automatically after approximately 72 minutes of inactivity.

How to use it at home

1. Start with clean, completely dry hair and apply heat protection to the lengths.
2. Open the device by sliding the locking button to UNLOCK, then plug it in.
3. Choose the temperature using the dial and press the 0/I button. The indicator light remains on while you work.
4. Put on protective gloves. Take a section of hair and place the device near the roots, but not against the scalp.
5. Clamp the barrels onto the section for a few seconds. Then move the device down without catching the already waved section, and continue to the ends.
6. Let the hair cool completely before touching it. When finished, press 0/I and, once cooled, slide the button to LOCK.

For what hair type

Suitable for all hair types. The BaByliss PRO guide: 140 °C for damaged, colored, or fine hair; 160 °C for normal hair; 180 °C for thick hair; 200 °C for very curly hair; and 220 °C for afro hair. On very short hair, the three barrels are not long enough to form the wave.

Specifications

What else you need

• Wella EIMI Thermal Image Heat Protection Spray
• L’Oréal Tecni.Art Flex Blowdry Leave-In Cream with Heat Protection
• Hair Sectioning Clips
• Wella EIMI Mistify Me Light Light-Hold Hairspray for Natural Waves
• Olivia Garden Fingerbrush Curved Brush

ProBeauty Tip. For a beach effect, leave 2–3 cm straight at the ends. The waves will look more natural and relaxed than if you wave the section all the way to the ends.

The BaByliss PRO Ultra Curl is a 25 mm hair straightener designed especially for curls: you make them with one hand, in a single movement. The EP Technology 5.0 floating plates smooth the strand, while the curved side plates give it a curl shape. You can also use it to straighten hair.

What it does for you

• It makes curls in a single movement, with one hand, without wrapping the hair.
• It smooths and curls at the same time: the strand slides between the plates, while the curved edges fix its shape.
• It presses evenly on the entire strand, because the floating plates compensate for thickness differences.
• It shows you when it's ready: the light flashes until it reaches the selected temperature.
• It is held securely in the hand, with tips that remain cool and support for the thumb.
• It turns off automatically if you do not use it for approximately 72 minutes.

How to use it at home

1. Start with clean, dry hair. Take a strand of at most 3.5 cm: the thinner it is, the more defined the curl will be.
2. Push the sliding button once for 170 °C or further for 200 or 230 °C. Wait until the light stops flashing.
3. Grip the strand at the root, with the curved plates facing the head, and close the plate.
4. Rotate the plate 90°, with the curved plates facing up.
5. Slowly move down towards the ends, rotating outwards, until the curved plates reach the bottom. Release the strand.
6. Twist the end of the curl 180° in its direction, so it settles. Finally, turn off the plate and let it cool.

For what type of hair

The manual recommends 170 °C for delicate and fine hair and 200 °C for medium hair, both for curls. The 230 °C setting is only for thick, curly, or afro hair, which must be straightened first. If you only want straight hair on fine hair, a plate with lower settings is more suitable.

Specifications

What else you need

• Wella EIMI Thermal Image Heat Protection Spray
• Schwarzkopf Session Label The Coat Heat Protection Spray
• Clips for holding hair in sections
• BaByliss PRO Flat Brush
• Osis+ Elastic Flexible Hairspray, for curls that last

ProBeauty Tip. The manual also describes a second method: rotate the plate inwards, not outwards. Try both on one strand each and keep the one that suits you more naturally.

BaByliss PRO UVFOIL01 is a single-foil shaver with a black titanium foil, metal housing, and a UV light cover. Every time the cover is closed, the shaving head automatically goes through a sanitizing cycle. It is designed for barbers, but you can use it just as easily at home.

What it does for you

• It keeps your shaving head sanitized: the UV light in the cover eliminates 99.9% of bacteria, according to the brand, in a 3-minute cycle.
• It shaves close to the skin for fades and along the hairline, with an ultra-thin black titanium foil.
• It covers an area of 44 mm, even though it has only one foil.
• It lasts all day: up to 5.5 hours of runtime after 3 hours of charging.
• It can also be charged via USB-C, and when needed, it can be used corded.

How to use it at home

1. Charge it continuously for 3 hours before first use. The blue LED flashes during charging and stays lit when finished.
2. Shorten long hair with a trimmer first.
3. Remove the cover, turn on the device, and glide it gently over the skin without pressing.
4. At the end, close the cover. The UV cycle starts automatically and lasts approximately 3 minutes; the blue LED turns off when it is finished.
5. Daily, remove the UV cover, detach the shaving head, and brush out the hair.
6. Once a week, rinse the shaving head under the tap and let it air dry.

For what type of work

It is suitable for skin fades, cleaning up the contours, the neck, and short facial hairs. A single foil is easier to control in small areas. If you often shave full heads, the UVFOIL02, with a double foil, covers more. It does not cut long hair.

Specifications

What else you need

• FXLRF1E foil and blade replacement set for UVFOIL01
• BaByliss PRO 4-in-1 spray for blade maintenance
• Boost+ Skeleton RedFX trimmer

ProBeauty tip. Do not spray disinfectant on the foil between clients: the brand explains that liquid solutions can damage the foils and blades over time. Close the cover and let the UV cycle do the work.

Upgrade your shaver's performance with the BabylissPRO UV Single Professional Replacement Kit (FXLFS1E) – designed to deliver ultra-precise cutting on contours, neck, face, and hairline. This complete kit contains a black titanium foil replacement head and a single high-precision blade, exclusively compatible with the UVFOIL01 – FXLFS1E model.

✔ What the kit contains:

• Double black titanium foil – superior strength and precision
• Single blade – for a smooth and even cut
• Replacement head – fits perfectly with the UV Single FXLFS1E shaver

📌 Compatibility:
🔒 Suitable only for BabylissPRO UV Single Foil FX – model FXLFS1E (UVFOIL01)
⚠️ Not compatible with dual-foil models or other shavers.

✨ Key benefits:

• Ultra-precision for clean contours and fine details
• Professional finish without irritation or pulling
• Superior quality materials for extended durability
• Quick and easy head and blade replacement

🔧 How to replace the shaver head:
1️⃣ Turn off the shaver and press the side button to open the head
2️⃣ Remove the old blade and install the new blade
3️⃣ Place the new foil and protective head until it clicks into place
4️⃣ Check the shaver's function before use

💡 PRO Tip:
Clean the shaver after each use and replace the foil and blade periodically for optimal performance with every shave.

🔧 BabylissPRO – precision and professionalism in every detail!

✨ BabylissPro UV Double Foil Shaver – Innovation in professional shaving

Discover the BabylissPro UV Double Foil Shaver – a revolutionary shaving device that combines cutting-edge technology with a robust and elegant design. Created specifically for professional barbers, but also ideal for personal use, this device offers a superior shaving experience, impeccable hygiene, and extended autonomy.

🔧 Key features:

• Corded or cordless use – Up to 5.5 hours of autonomy for complete freedom of use.
• Double black titanium foil system (44 mm) – Ensures efficient, precise, and gentle shaving, even on sensitive skin.
• Integrated antibacterial UV technology – Eliminates up to 99.9% of bacteria for excellent hygiene, automatically activated when the cap is closed.
• Fast charging in just 3 hours – With standard and USB-C port, for maximum convenience in any situation.

✅ User advantages:

• Enhanced hygiene and guaranteed safety – The UV system protects skin health and keeps the shaving head clean after each use.
• Durability and style – The resistant metal casing and premium finish reflect the professional quality of the device.
• Portable and practical – Includes a protective pouch, perfect for safe transport and storage.

🔝 Choose BabylissPro UV Double Foil Shaver for a hygienic, comfortable, and high-performance shave!
📦 Available now on Probeauty.RO – invest in an innovative shaving device, created for lasting results and top-tier grooming.

Restore your shaver's maximum performance with the complete BabylissPro FXLRF2 replacement kit, exclusively compatible with the Double FoilFX02 UV model. Made in the USA, this professional set is ideal for periodic maintenance, offering a precise, comfortable, and safe shave.

🔧 Kit contents:

• Titanium foil – for a smooth, irritation-free shave
• Ultra-efficient cutting blade – durable and powerful
• FXLRF2 compatible replacement head – perfectly adapted to the device

✅ Compatibility:

• Only with BabylissPro Double FoilFX02 UV (FXLRF2)
• Not compatible with other models or single foils

💎 Key advantages:

• Like-new performance with every use
• Quick and easy assembly, no special tools required
• Precise shave, without pulling or irritation
• Resistance and durability during intensive use
• Recommended for salons and professional use

🛠️ Quick usage instructions:

1. Press the side button to remove the old foil
2. Carefully install the new foil
3. Add a few drops of oil for maintenance
4. Test the device before use

🧼 Recommended maintenance:

• Clean the foil and blade with a special brush or professional spray
• Do not wash with water
• Allow the device to cool completely before storage

💡 Ideal for professionals who demand precision, hygiene, and maximum reliability every day.

The BaByliss PRO Vero is a 2000 W hair dryer made in Italy, with an AC motor and ionic technology. It has an aerodynamic shape and a slim, easy-to-hold handle, and the air comes out at 138 km/h. It is for you if you want a simple and reliable salon dryer for everyday drying.

What it does for you

• Dries quickly: 2000 W AC motor and 138 km/h air.
• Leaves hair smooth and shiny, with less frizz, thanks to ionic technology.
• Easy to hold: 460 g, slim handle, and balanced design.
• Gives you a smooth finish, with the 6 × 75 mm concentrator nozzle.
• Sets the hairstyle with the cool air setting.
• Easy to maintain: the filter is removable for cleaning.

How to use it at home

1. Towel-dry your hair and apply heat protection to the lengths.
2. Dry the roots without the nozzle, on high speed and medium heat.
3. Attach the 6 × 75 mm nozzle and divide the hair into sections secured with clips.
4. Run the round brush through each section, directing the air from the roots to the ends.
5. On the low speed setting, you can work more precisely on the bangs and temples.
6. Set the style with cool air, then unplug the dryer and clean the filter.

For what hair type

It works on all hair types, for daily drying and smooth blow-drying. With 3 heat settings, you can use it gently on fine hair. It does not include a diffuser in the brand's range, so if you have curly hair and want to dry your curls, a model with an included diffuser, such as Falco or Lupia, will suit you better.

Specifications

What else you need

• Olivia Garden Ceramic+Ion SpeedXL 45 Round Brush
• Wella EIMI Thermal Image Heat Protection Spray
• L’Oréal Professionnel Flex Blowdry Leave-in Cream, with heat protection
• Hair clips

ProBeauty tip. Finish each blow-dry with a few seconds of cool air on each section. Cool air sets the style and adds shine.

With BabylissPro Vulcano HQ 2400W, you get fast and efficient drying, with professional results, regardless of hair type. This high-performance dryer is equipped with a long-lasting motor and offers an impressive air speed of 166 km/h, making it ideal for intensive use in both salons and at home.

Key features:

• 2400W power and high-performance motor – Ensures efficient and long-lasting drying, with a drying rate of over 6g of water per minute.
• Ionic technology – Reduces frizz, leaving hair smooth, shiny, and easier to detangle.
• Versatile speed and temperature control – Customize drying to achieve ideal results on any hair type.
• Cool shot button – Sets the style for a long-lasting finish and a professional look.

Benefits of BabylissPro Vulcano HQ 2400W:

• Air speed of 166 km/h and pressure of 1438 Pa – Fast and efficient drying for optimal results.
• Ergonomic design and removable filter – Easy to handle and maintain, ideal for prolonged use.
• Professional accessories – Includes 6×60 mm and 6×75 mm concentrator nozzles for precise styling.

Attention! The product may have an opened or damaged package and may show minor signs of use or small scratches that do not affect its functionality!

BaBylissPro 4artists FoilFX 01 is a portable mini shaver, specifically designed for precision finishing and fine detailing. Equipped with a powerful 8500 RPM motor and a compact design, this device is ideal for professional barbers and users who want a perfect shave at any time.

Key Features of BaBylissPro 4artists FoilFX 01:

• Cordless operation for up to 6 hours – Powered by high-quality alkaline batteries, offering extended autonomy and total mobility.
• Shaving head with ultra-fine floating blade – The 40 mm width and movable design ensure a smooth and precise shave, ideal for fading lines and finishing contours.
• Durable all-metal construction – The robust casing and powerful DC motor guarantee durability and consistent performance.

Benefits for users:

• Professional precision – Perfect for fine shaving, leveling, and creating clear, well-defined lines.
• Compact and portable – The small design and included protective pouch make this device the ideal partner for personal grooming on the go.
• Easy to maintain – The detachable head and included cleaning brush ensure optimal hygiene after each use.

Package includes:

• BaBylissPro 4artists FoilFX 01 Shaver
• Cleaning brush
• 2 alkaline batteries
• Protective pouch and user manual

Discover the advantages of precision shaving with BaBylissPro 4artists FoilFX 01! Available now on Eternal.RO – order it and enjoy a compact, reliable, and high-performance shaver for impeccable results wherever you are.