Apparatus - Men

Attention! The product may have opened or damaged packaging and may show minor signs of use or small scratches that do not affect its functionality!

Experience top performance with the Wahl Hi-Viz Li Ion Cordless 5* Detailer, ideal for professional barbers. With an ergonomic and robust metal design, this device offers excellent maneuverability and enhanced comfort. Equipped with DLC-coated T-Wide blades for precise cutting, and a lithium-ion battery that ensures up to 135 minutes of continuous operation.

Technical Information:

• Motor: Very powerful DC 7200 rpm
• Battery Type: Lithium-ion
• Run Time: Over 135 minutes
• Cutting System: T-Wide
• Cutting Length: 0.4 mm
• Cutting Width: 40.6 mm

Package Contains:

• Detailer machine
• Charging stand
• Charging adapter
• Cleaning brush
• Lubricating oil
• Blade protection cap
• User instructions

Lithium-Ion Battery:

The device is equipped with a lithium-ion battery, a modern technology that offers high energy storage capacity and a long battery life.

Extended Run Time:

The device has a continuous operating time of over 135 minutes, providing the user with a long working period without frequent recharging.

T-Wide Cutting System:

The device uses a T-Wide cutting system, meaning the blades are positioned in a wider configuration to cover a larger working surface in a single pass.

Cutting Length:

The cutting length of the device is 0.4 mm, which allows for precise and detailed haircuts, perfect for finishing details or creating complex styles.

Cutting Width:

The cutting width of the device is 40.6 mm, which allows for efficient coverage of a larger area during trimming, thus facilitating the working process and achieving uniform and professional results.

Premature wear of clipper blades:

In general, physical wear can occur for several reasons. Most often it appears due to incorrect use or due to non-compliance with essential maintenance steps. Among the most common we can mention:

• Lack of lubricant film on the blade surface
• Rapid overheating during operation
• Wear of the plastic guide
• Presence of residues (fur/hair, metals, dust and other foreign materials) between the lower and upper blades

We recommend using cooling and lubricating spray between haircuts and for proper maintenance.

Proper maintenance of clipper blades:

Clipper blades must be oiled with a special oil before, during, and after use. If the clipper blades leave a streak or seem to slow down the clipper's operation, then they need screw adjustment, checking the tension spring or plastic guide, and lubrication with an oil film. The procedure involves applying a few drops of oil to the front of the blades and to the moving parts. Excess oil should be wiped off immediately with a dry, clean cloth. When not in use, clipper blades should be stored in a special dry box or in the original packaging they were purchased in.

Attention! The product may have opened or damaged packaging and may show minor signs of use or small scratches that do not affect its functionality!

The BabylissPro Double Foil FX3 Black is the ideal choice for those looking for a cord-free professional shaver, perfect for a close and precise shave. Recognized by professionals as one of the best performing devices in the industry, this model combines advanced technology with practical design, offering a superior shaving experience, suitable for both personal use and salons.

Essential Features of BabylissPro Double Foil FX3 Black:

• Ultra-fast 10,000 RPM rotary motor – Ensures uniform and efficient cutting, suitable for any type of shave.
• Hypoallergenic double foil system made of gold and titanium – The ultra-thin foils follow the contours of the face and head, providing an irritation-free shaving experience.
• Durable lithium-ion battery – Offers up to 3 hours of cordless autonomy, with fast charging in just 3 hours.
• Automatic closing cap – The device automatically turns off when the cap is applied, for added safety and energy saving.

Benefits for users:

• Maximum comfort and precision – The ergonomic design and advanced technology ensure a close shave, without compromise.
• Total cordless mobility – Ideal for professionals and those who want flexibility, regardless of location.
• Easy battery monitoring – Four-level LED indicators clearly show the charge level, for optimal control.

Discover the BabylissPro Double Foil FX3 Black and enjoy a professional shaver with top performance! Available on Eternal.RO – order now and enhance your shaving experience with a superior quality product.

Attention! The product may have an opened or damaged packaging and may show minor signs of use or small scratches that do not affect its functionality!

The professional Super Taper Cordless device from Wahl Professional impresses with a powerful DC oscillating motor, ideal for intensive use in beauty salons worldwide.

With advanced lithium-ion battery technology, it offers up to 90 minutes of continuous operation and charges quickly in just 120 minutes. It can be used both corded and cordless, allowing maximum flexibility during cutting.

The integrated LED display shows the battery level and charging time, ensuring you are always ready for an uninterrupted trimming session.

Main features

• Battery operating time: Approximately 90 minutes of continuous cutting.
• Powerful DC motor: With blade movement at over 5500 revolutions per minute for precise and efficient cuts.
• Adjustable cutting length: From 0.7 mm to 3 mm, with a 40 mm Taper blade for various cutting styles.
• High-precision blades: High-performance set of interchangeable CHROM BLADE blades and a "stagger tooth" blade for perfect results.
• Included accessories: Cleaning brush to keep the device in optimal condition.
• Operating voltage: Globally compatible, between 100-240V / 50-60 Hz.

Package contents

• Wahl Super Taper Cordless Hair Clipper
• 4 Cutting Guides: 1 (3.00 mm), 2 (6.00 mm), 3 (10.00 mm), 4 (13.00 mm)
• Cleaning brush
• User Manual

With a reduced weight and ergonomic design, the Wahl Super Taper Cordless is the perfect choice for any professional seeking a high-performance and reliable hair clipper. Buy now and experience advanced technology for exceptional haircuts!

Superior digital power, in an ultra-light format! The Wahl Vanquish® Compact redefines the standard for professional hair dryers, offering impressive performance in a miniature and ergonomic body.

With an ultra-fast digital motor of 101,000 RPM, anti-frizz ionic technology, quiet design, and 3 speed settings + memory function, this dryer is perfect for salons, as well as for premium personal use.

Main Features:

• Ionic technology: eliminates frizz, smooths hair, and adds shine
• SmoothTone digital motor: quiet, yet extremely powerful (101,000 RPM)
• Compact and ultra-lightweight design – only 290g! Zero fatigue during styling
• 3 speed settings with memory function + 3 temperature settings
• Cold Shot – perfect styling hold
• Self-cleaning function for easy maintenance
• 3m professional cable + 2 premium magnetic nozzles (standard and wide)

Includes: dryer, 2 magnetic nozzles, premium storage stand (Vanquish Stand – optional)

Color: Elegant Black
Universal compatibility: 220–240V

Ideal for: professionals seeking performance, precision, elegance, and total comfort while working.

Attention! The product may have opened or damaged packaging and may show minor signs of use or small scratches that do not affect its functionality!

Founded in 1961 in Paris, France, BaBylissPRO is a company that manufactures high-performance professional hair styling tools and accessories, dedicated to professionals. For over 50 years, BaBylissPRO has been producing innovative professional tools to inspire the creativity of professional hairdressers everywhere. BaBylissPRO tools encourage the evolving styles and trends in hairdressing and styling for professionals through the quality and performance of the products offered. Universal diffuser with two attachments for all BaBylissPRO hair dryers, except BaBylissPRO Vulcano and BaBylissPRO Murano. The universal diffuser diameter is min: 3.5cm, max: 6cm. The Babyliss Pro diffuser ensures faster drying, as the air distribution from the dryer is controlled.

Compatibility: NOT compatible with the following types of Babyliss dryers: BaByliss Pro Vulcano and BaByliss Pro Murano

BaByliss PRO 4Artists GoldFX is an all-metal, gold-colored hair clipper with an EDM Technology motor developed in collaboration with Ferrari and a 45 mm Japanese steel blade. It works corded or cordless at the same power.

Resealed product. It has been unsealed for inspection or display and may show minor signs of wear or handling. It is complete and fully functional, tested by us, and comes with the same warranty as a new product. It does not include the original box.

What it does for you

• Skin-close fades with a 45 mm flat blade featuring a DLC and nickel-titanium coating and a very sharp V-shaped cutting angle.
• Consistent power with a high-torque digital motor that is electronically controlled, quieter, and produces less vibration.
• Smooth transitions between lengths with 5 settings: 0.8 – 1.4 – 2 – 2.8 – 3.5 mm.
• Eight fixed lengths with guide combs of 1.5; 3; 4.8; 6; 10; 13; 16 and 19 mm.
• Approximately 120 minutes of cordless use after 3 hours of charging.

How to use it at home

1. Before first use, charge it for 3 hours. The red LED flashes while charging and stays lit when the battery is fully charged.
2. Place the clipper in the charging stand only with the power switch set to 0.
3. Remove the blade guard, turn the clipper on, and hold it at a 45° angle. Apply 2 drops of oil to the blades, leave them for a few seconds, then blot away any excess.
4. Turn off the clipper, attach the guide comb, and press down on the back until it clicks.
5. The lever shortens the cut when moved up and lengthens it when moved down.
6. Finally, clean the blade with the brush and oil it. The guide combs can be rinsed, but dry them thoroughly.

What type of haircut it is best for

The brand recommends it for all hair types, for both classic haircuts and fades, outlining, and hair tattoos. For fine lines on the neck and beard, an outlining clipper with a T-shaped blade gives you more control.

Specifications

What else you need

• BaByliss PRO 4-in-1 Blade Spray
• Wahl Blade Oil
• Graphite Taper Blade FX803BME, for FX8700
• Set of 8 FXPCGE Guide Combs, for FX8700
• Wahl Hairdressing Cape

ProBeauty Tip. When the LED starts flashing during use, you have about 3 minutes left. Finish your cut and place the clipper in the charging stand; do not let the battery discharge completely.

Wahl No. 5 Black 16 mm Guard is the standard Wahl 16 mm guard, sold separately. Wahl says that No. 5 leaves approximately 16 mm of hair, for a longer crew cut and for fade haircuts. Get it to replace a lost or broken one, or to have a second one on hand.

What it does for you

• Cuts uniformly at 16 mm over the entire area you pass over with the machine.
• Use it for a longer crew cut and fade haircuts.
• Complete the set without having to buy all 8 guards again.
• Works on several Wahl machines: the brand lists it as compatible with 8 models, from the Super Taper to the Balding.

How to use it at home

1. Stop the machine and brush the hair off the blade.
2. Place the guard on the blade and press until it clicks into place. Check that it is secure before you start.
3. Cut against the direction of hair growth, with even strokes.
4. Pass over the same area several times to catch the lying hairs.
5. After cutting, clean it with a small brush. From time to time, wash it with warm water and mild soap and let it dry completely.

For what type of machine

Wahl lists it as compatible with the Super Taper, Super Taper Cordless, Legend, Legend Cordless, Senior Cordless, Magic Clip, Magic Clip Cordless, and Balding. You receive a single guard, not a set. It is not for outline machines or for machines with slide-on guards, such as the Kuno or ChromStyle.

Specifications

What else you need

• Wahl No. 4 guard, shorter
• Wahl No. 6 guard, longer
• Complete Wahl Premium guard set
• Wahl Magic Clip Cordless hair clipper
• Wahl oil for hair clipper blades

ProBeauty tip. For a long fade, use No. 5 on the top of the sides and No. 4 (13 mm) lower down. Short strokes, upwards and outwards.

The Wahl Balding Replacement Blade is the blade for the Wahl Balding clipper. It has trimmer-like teeth and a cutting length of 0.5 mm, for bald heads and skin fades. It is adjusted to zero overlap, so you can work very close to the skin.

What it does for you

• Bald head and skin fade: Wahl designed it for bald fades and skin fades.
• Short, clean cut: the trimmer-like teeth cut at 0.5 mm.
• Zero control: it is adjusted to zero overlap for results close to the skin.
• Quickly cover the head: the cutting width is 46 mm.
• Ready to install: comes with oil and screws, according to Wahl UK.

How to use it at home

1. Turn off the clipper and unplug it or remove it from the charging station.
2. Unscrew the screws on the old blade and remove it.
3. Place the new blade on the clipper head, with the adjustment lever caught in the moving blade.
4. Put the screws back in place and tighten them just enough so that you can still move the blade.
5. Align the blades: the moving blade must not protrude in front of the fixed blade. Only then tighten the screws completely.
6. Put a few drops of oil on the teeth and turn on the clipper for a few seconds.

For what type of device

For the Wahl Balding clipper, according to Wahl Europe and Wahl UK. It is the blade for bald heads, skin fades, and the shortest area of a fade. It is not a general-purpose cutting blade or for long hair.

Specifications

What else you need

• Wahl Balding Clipper
• Wahl Guard for the Balding Clipper
• Wahl Oil for lubricating the blades
• Wahl Blade Ice Spray that cools and cleans the blades

ProBeauty Tip. For a bald head, first pass the clipper in the direction of hair growth, then in the opposite direction. The first pass removes the bulk, the second leaves the skin smooth without insisting on the same area.

High-quality cotton towel, black, is ideal for any salon, barbershop, or for personal use at home. Dimensions: 94x48cm

The Moser 1400 Mini Corded Trimmer 1411-0050 is the compact version of the classic Moser 1400, designed for outlining and finishing. It features a STAR BLADE stainless steel blade made in Germany, an oscillating motor for continuous use, and weighs approximately 190 g. It is burgundy.

What it does for you

• Close-to-skin outlining: the 32 mm blade cuts at 0.3 mm.
• Continuous use, with a polarized oscillating motor running at approximately 3000 rpm.
• Quiet and powerful, with the new motor from the 1400 Mini range.
• Always ready to use: it is corded and does not require a battery.
• Small and lightweight, making it easy to maneuver around the ears and neck.

How to use it at home

1. Apply a drop of oil to the blade and run the trimmer for a few seconds.
2. For the hairline and sideburns, hold the blade perpendicular to the skin.
3. For a short beard, attach the comb.
4. Work in short strokes without applying pressure.
5. When finished, unplug the trimmer, clean the blade with the brush, and oil it.

What it is best suited for

For outlining, the neck, sideburns, mustache, and finishing, whether at the barbershop or at home. It pairs well with a Moser 1400 hair clipper for detailing. To cut all the hair on your head, you need a hair clipper with a wide blade.

Specifications

What else you need

• Wahl blade oil
• Wahl Blade Ice spray for cooling the blades
• Wahl neck strip
• Wahl striped barber cape

ProBeauty tip. For a straight hairline, first draw the line lightly with the corner of the blade, like a pencil. Only then clear the area beneath it using the full width of the blade.

The Moser Primat Mini Corded Trimmer 1411-0052 is Moser's small trimmer in titanium, with an oscillating motor for continuous use. It has a STAR BLADE stainless steel blade, made in Germany, which cuts at 0.3 mm, and weighs approximately 190 g.

What it does for you

• Close-to-skin contouring: the 32 mm blade cuts at 0.3 mm.
• Work without breaks: the polarized oscillating motor is made for continuous use.
• Runs quietly and smoothly, so it is pleasant for the client too.
• Never leaves you halfway: it is corded, without a battery to charge.
• Durable blade, made of precision-sharpened stainless steel.

How to use it at home

1. Put a drop of oil on the blade and run the machine for a few seconds.
2. For contouring, hold the blade perpendicular to the skin and work with short strokes.
3. For a short beard, attach the comb.
4. Keep the cable behind the hand, so it does not get tangled near the ear.
5. After use, unplug the machine, clean the blade with the brush, and oil it.

For what type of work

For contours, necklines, sideburns, mustaches, and finishing, in the barbershop or at home. It is suitable if you want a simple, corded machine that never runs out of power. For cutting the whole head, you need a hair clipper with a wide blade.

Specifications

What else you need

• Wahl oil for blades
• Wahl Blade Ice spray for cooling the blades
• Wahl neck strip
• Wahl cutting cape

ProBeauty tip. Machines with an oscillating motor heat up slightly after prolonged use. Oil the blade between clients: the oil reduces friction and keeps the blade cooler on the client's skin.

The JRL Forte Pro Lite 2020L is a lightweight, black hair dryer weighing 390 g, with 2400 W and a 20500 rpm motor. JRL UK also sells it under the name Forte Pro Feather. It is for you if you dry your hair often and want a device that won't tire your hand.

What it does for you

• Dries quickly: 2400 W and the Turbo function, which increases airflow.
• Your hand gets tired less easily: the dryer weighs only 390 g.
• Smoother and shinier hair: negative ions and graphene heating elements help achieve a smooth, shiny result.
• You control the heat: 2 speeds, 2 temperatures, and cool air for setting.
• You work more quietly: JRL describes it as a low-noise dryer.
• Motor made to last: lifespan of up to 5000 hours.

How to use it at home

1. Towel-dry your hair thoroughly before turning on the dryer.
2. Apply a heat protection spray to the lengths.
3. Dry the roots on high speed with the nozzle removed to remove moisture quickly.
4. For blow-drying, attach the concentrator and work in sections with a round brush.
5. Use the Turbo function only for quick drying, not on already dry ends.
6. Finish with cool air to set the style.

For what hair type

JRL does not link it to a specific hair type. It is lightweight, so it is good for drying a lot or daily, on short or long hair. It has 2 temperature settings, not 3: on very fine or bleached hair, use the low setting. It does not come with a diffuser, so for defined curls you will need a separate diffuser.

Specifications

What else you need

• White JRL x Lamborghini Forte Pro Lite 2020L Hair Dryer
• Wella EIMI Thermal Image Heat Protection Spray
• Olivia Garden Nano Thermic 55 Round Brush for Blow-Drying
• ETB Hair 43 mm Round Brush
• ETB Hair Paddle Brush for Detangling
• ETB Hair Stylesse Shield Smooth Heat Protection Spray

ProBeauty Tip. Hold the concentrator a few centimeters from the hair and direct the air from the roots to the ends. This smooths the cuticle and makes the hair shinier.

Attention! The product may have opened or damaged packaging and may show minor signs of use or small scratches that do not affect its functionality!

Top performance, absolute precision, and total freedom! With the new BaByliss PRO FXONE Shaver FX79FSMBE, personal care reaches a superior level – a professional shaver, designed for those who demand impeccable results with every use.

Equipped with a lithium battery compatible with all FXONE devices, this appliance is part of a revolutionary ecosystem from BaBylissPRO. You only need one battery for all tools in the FXONE range – an intelligent solution for dynamic professionals passionate about efficiency.

The FXONE shaver offers an ultra-smooth shave with millimeter precision and a compact, ergonomic design that fits perfectly in the palm of your hand. The high-performance shaving head glides gently over the skin, reducing irritation and providing an impeccable finish – ideal for contours, fine details, and daily beard or scalp maintenance.

What the complete set contains:
– FXONE shaver with elegant housing, matte black finish
– Interchangeable lithium battery, compatible with all FXONE devices
– Charging stand included – compact, stable, and easy to use

Benefits:
– 100% compatibility with all FXONE tools
– Long-lasting battery with consistent performance
– Ergonomic design, ideal for professional or personal use
– Quick response to the needs of modern barbers – versatility, comfort, and power in one product

BaByliss PRO FXONE is not just a shaver – it's a top-tier technological experience, where every detail is designed for performance, comfort, and precision.

🪒 Say goodbye to uncomfortable shaving, and welcome top performance!
Discover GA.MA Absolute, the professional shaver created for barbers who want speed, precision, and comfort in a single device. With a super-powerful motor of 6800 revolutions/minute, a generous autonomy of 90 minutes, and a weight of just 139g, this device becomes the perfect ally for intense styling sessions.

⚡ Power and performance in your palm
• Ultra-fast DC motor – 6800 RPM
• Oscillating titanium blades – 0.1 mm cut, ideal for a smooth and clean shave
• Compact, portable, and lightweight design – only 139g
• Autonomy: up to 90 minutes with a full charge (120 min)
• Quiet: only 60 dB – perfect for professional and home use

💼 The package content includes everything you need:
✔️ GA.MA Absolute shaver
✔️ Power cable and adapter
✔️ Cleaning brush and maintenance oil
✔️ Blade protection
✔️ Clear instructions for use

🛠️ Easy maintenance, guaranteed durability
Regularly clean the blades with the included brush, use professional sprays or oils to keep the device in perfect condition. Do not use it near water and keep it away from children.

🔒 Safety and warranty
The product complies with all safety standards (DIRECTIVE 89/336/EEC) and comes with a 12-month warranty.

💡 Recommended for:
✔️ Professional barbers
✔️ Home use, with salon-quality results
✔️ Beard, mustache, contour, and full shave

🎯 If you want a precise, durable, and fast shaver, the ideal choice is GA.MA Absolute – created for uncompromising performance!

💨 Fast, precise, and gentle with your hair! With GA.MA IQ Lite Max, professional styling becomes easier than ever! This revolutionary hairdryer weighs only 314g and combines state-of-the-art technology with digital performance, delivering salon-worthy results right in your home or professional studio.

🔬 Innovative technologies for your hair's health:
• Venturi Effect: Concentrated and fast airflow, even without accessories
• Oxy-Active Technology: Antioxidant protection and natural shine – closes the cuticle and keeps hair healthy
• System C: Uniform heat distribution for safe and efficient drying

🔥 Top performance:
• Power: 1700W
• 32mm digital motor with 85,000 RPM
• Pressure: 500 mmH₂O
• Airflow: 75 m³/h (without accessories)
• Noise level: only 81 dB – quiet and comfortable
• 3 temperature settings + 2 speeds + cool shot button
• Weight: only 314g – ultra-light for fatigue-free styling sessions
• Compact dimensions: 16.5 x 19.5 x 4.8 cm

🧰 Included accessories for complete styling:
• 2 professional concentrators (6.35 cm & 9.15 cm)
• 1 deep diffuser (Ø13.03 cm) – ideal for curls and volume
• Complete care kit: anti-slip pad, cleaning cloth, and brush
• 3 spare filters (mesh) for optimal maintenance
• External metallic filter with micro-perforations (Snap Lock)

🔌 Enhanced comfort in use:
• Hanging hook – easy to store
• 3-meter professional cable – total freedom of movement
• Intuitive interface with 2 durable mechanical switches

🎯 Recommended for:
• Professional stylists looking for reliability and technology
• Home users who want quick results without hair damage
• All hair types and textures

💡 Why choose GA.MA IQ Lite Max?
Because it is light, powerful, smart, and safe for hair. It's the ideal companion for efficient styling, without compromise – whether you're at home or in a top salon.

The JRL Onyx 2020T is the cordless outliner from the Onyx line, the companion to the Onyx 2020C hair clipper. It features a T-shaped Onyx EZ-GAP blade with 360° visibility, an 8200 rpm motor, and up to 3.5 hours of runtime. It’s for you if you want clean lines, a defined beard outline, and fine detailing.

What it does for you

• Tool-free zero-gap: the EZ-GAP blade is adjustable without tools, for lines that sit very close to the skin.
• See the whole blade: it offers 360° visibility, ideal for outlines, corners, and designs.
• Doesn’t pull hair: Smart-Clip increases the speed when it detects resistance, even in thick hair.
• Fast motor, 8200 rpm, with a lifespan of up to 1000 hours.
• Long runtime: up to 3.5 hours on a single charge.

How to use it at home

1. Charge it on the stand before first use.
2. Apply a drop of oil to the blade and run it for a few seconds.
3. Comb the area and visually establish the line before cutting.
4. Outline with short strokes, holding the blade perpendicular to the skin.
5. For the beard, stretch the skin with your free hand.
6. Finally, brush away the hair and re-oil the blade.

What it’s designed for

It’s for outlines, the beard line, the neck, temples, hair designs, and dry shaving. It’s not designed for cutting the whole head. For volume and fades, use a hair clipper such as the Onyx 2020C.

Specifications

What else you need

• JRL Onyx 2020C Hair Clipper
• Blade Oil
• Blade Cooling and Cleaning Spray
• Hairdressing Cutting Cape
• Fade Brush

ProBeauty Tip. When outlining the beard, always work from the cheek toward the neck, never the other way around. The line will stay lower and look more natural.

The Panasonic Professional WER9P10 is a narrow 10 mm replacement blade for Panasonic professional trimmers. Panasonic lists it for the ER-PA11 and also includes it in the replacement parts for the ER-GP22 trimmer. It is a blade for fine lines, not for trimming large areas.

What it does for you

• Reach small areas: the narrow 10 mm blade fits into corners and around the ear.
• Clean lines: The ER-GP22, which it is listed for, has an additional blade for precise lines and styling.
• Original part: the WER-9P10 code belongs to Panasonic, not a copy.
• No need to replace the trimmer: you only replace the narrow blade when it becomes dull.

How to use it at home

1. Turn off the trimmer and remove it from the charging stand.
2. Remove the old narrow blade as shown in the trimmer manual.
3. Brush out any hair left in the blade.
4. Mount the new blade and check that it is not loose.
5. Put a drop of oil on the teeth and turn the trimmer on briefly.

For what type of machine

Panasonic lists it for the ER-PA11 trimmer and includes it in the accessories for the ER-GP22 trimmer. It is not the main blade of the ER-GP21 or ER-GP22. That one has a different code, WER9352.

Specifications

What else you need

• Oil for hair clipper blades
• Spray that cools and cleans the blades
• 4-in-1 spray for hair clipper maintenance

ProBeauty tip. With a narrow blade, work with short strokes on skin stretched with the other hand. This way, the line comes out straight and you do not press multiple times on the same area.

The Wahl Hair Dryer Holder 0093-6530 is a simple holder made of silver brushed steel for your hair dryer. It weighs only 160 g and keeps your hair dryer within easy reach without taking up space on the work table.

What it does for you

• Clears the work table: the hair dryer no longer lies flat among brushes, clips, and products.
• Keeps the hair dryer in the same place, so you can grab it instinctively without having to look for it.
• Lasts over time, as it is made of brushed steel, which is easy to clean.
• Takes up little space: it is small, lightweight, and has a subtle silver shade.
• Protects the hair dryer from falling off the edge of the table.

How to use it at home

1. Choose a place near the outlet where you use the hair dryer, away from the sink.
2. Place or secure the holder firmly in the chosen spot and check that it does not move.
3. Before turning off the hair dryer, hold it on cool air for a few seconds, then turn it off and place it in the holder.
4. Loosely gather the cord without wrapping it tightly around the hair dryer.
5. Wipe the holder occasionally with a dry cloth.

For what type of hair dryer

It is a general holder for salon or home hair dryers. Wahl does not publish a list of compatible models, so check the shape and size of your hair dryer before purchasing. It is not a holder for hot plates or curling irons.

Specifications

What else you need

• Wahl Ventus Pro Hair Dryer
• Wahl Protect Hair Dryer
• Wahl Super Dry Hair Dryer

ProBeauty Tip. Place the holder on the side of the hand you use to hold the hair dryer. You can set it down and pick it up in a single motion without reaching over the client.

Discover the BaByliss PRO SnapFX Cordless Clipper - Professional Performance at Your Fingertips

The BaByliss PRO SnapFX clipper is the ideal high-performance tool for achieving professional haircuts, whether you're at home or in a salon. Combining advanced technology with an ergonomic design, this clipper allows you to create precise and uniform hairstyles with ease and comfort.

Key Features:

• Powerful Brushless Motor: Equipped with a digital brushless motor, this clipper offers a powerful torque of 6800RPM, ensuring power and speed for precise and efficient cuts.
• Fast Charging and Dual Battery System: The two lithium-ion batteries fully charge in just 3 hours when placed together on the charging stand. Additionally, a single battery charges in just 2 hours, ensuring you'll never run out of power. Each battery provides 2 hours of runtime, guaranteeing continuous and uninterrupted operation.
• Robust and Ergonomic Design: The robust metal construction is built to last, while the ergonomic and balanced design provides a perfect grip and excellent control.
• High-Precision DLC Fade Blade: The sharp black DLC blade is ideal for fades and precise cuts. Adjustable to zero gap and equipped with a smart opening system, it allows for quick and easy maintenance.

Benefits of the BaByliss PRO SnapFX Clipper:

• Power and Speed: The digital brushless motor delivers superior performance, ensuring fast and precise cuts for any hair type.
• Unlimited Runtime: Thanks to the dual interchangeable battery system, you will benefit from continuous, uninterrupted runtime. One battery charges while the other is in use, giving you a worry-free clipping experience.
• Ergonomic and Durable Design: The robust and ergonomic construction offers comfort and long-term durability, making it ideal for intensive daily use.
• Maximum Versatility: With a complete set of comb attachments and an adjustable blade, this clipper is perfect for any haircut style, from classic cuts to complex fades.

Technical Specifications:

• Runtime: Each battery provides 2 hours of use.
• Charging Time: 2 hours for a single battery, 3 hours for both batteries on the charging stand.
• Fade Blade: Adjustable to zero gap, with smart opening system for easy maintenance.
• Battery System: Two interchangeable lithium-ion batteries.
• Light Indicator: Light ring for battery charge level (solid blue for full battery, flashing blue for low battery, flashing red for almost discharged battery).
• Adjustment Lever: 5 detent cutting positions: 0.8, 1.4, 2, 2.8, 3.5mm.
• Metal Construction: Robust, ergonomic, and balanced design, with a textured cylindrical handle for a perfect grip.
• Comb Attachment Set: 8 premium comb attachments (0.5, 1, 1.5, 2, 3, 4, 5, 6mm) with fiberglass for durability and metal clips for secure fastening.

Purchase the BaByliss PRO SnapFX

Unleash your creativity and showcase your talent with the BaByliss PRO SnapFX. Exceptional cutting performance and unlimited runtime take the art of hairdressing to the next level. Don't miss the opportunity to offer your clients the best results and elevate your services to a superior professional level.

The BaByliss PRO M4053E Barber Towel is the essential towel for the barber station. Use it to prepare the beard before edging or shaving and to clean up after a cut. It is a simple accessory that complements the BaByliss PRO tools on your table.

What it does for you

• Prepares the beard before edging or shaving, as recommended by the official distributor.
• Keeps the client's neck clean by wiping away cut hair after each pass.
• Protects the collar if placed on the shoulders under the cape.
• Completes the workstation alongside the shaver and edger.

How to use it at home

1. Place the towel on the client's shoulders under the cape before cutting.
2. For the beard, use it to prepare the area before edging or shaving.
3. Between passes, gently wipe cut hair from the neck and cheeks.
4. After each client, put the towel in the wash and use a clean one.
5. Wash it according to the instructions on the label and let it dry completely.

For what type of work

It is suitable for barbers and those who cut or style their beards at home. It does not replace the cutting cape but complements it. If you need towels for dyeing, choose ones that you do not mind getting stained.

What else you need

• BaByliss PRO FX3 Double Foil Shaver
• SkeletonFX GoldFX Edger
• Wahl Cutting Cape
• BaByliss PRO 4-in-1 Blade Spray

ProBeauty Tip. Keep at least two towels at the station, one for the beard and one for the neck. This prevents cut hair from getting back on the client's face.

BaByliss PRO Graphite Taper FX803BME is a 45 mm replacement blade for FX8700, LO-PROFX FX825, and SnapFX FX895E clippers. The blade has a crescent shape that supports a natural back-and-forth motion when cutting. It is suitable for fades and clean finishes.

What it does for you

• Makes fades easier: the crescent shape follows the back-and-forth motion of your hand.
• Cuts cleanly and precisely across its entire 45 mm width.
• Heats up less: the graphite coating reduces friction and keeps the blade at a lower temperature.
• Is highly durable, as the graphite is a very durable coating, according to the brand.
• Can be adjusted to zero-gap for very short cuts.

How to use it at home

1. Turn off the clippers and raise the fine adjustment lever on the left to the top position.
2. Loosen the screws with a screwdriver and set them aside.
3. Gently lift the old moving blade and replace it with the new one on the oscillator.
4. Install the new fixed blade and center the moving blade parallel to it to avoid the risk of injury.
5. Reattach the screws.
6. Clean and maintain the blade regularly with BaByliss PRO 4-in-1 spray, as recommended by the brand.

For which type of clipper

It fits clippers from the FX8700 series (ChromFX, Boost+), LO-PROFX FX825, and SnapFX FX895E, as well as other clippers with a 2-hole blade system. It is not for SkeletonFX trimmers, which use 40 mm T-blades.

Specifications

What else you need

• BaByliss PRO Boost+ Metal Gold FX8700GBPE Clippers
• BaByliss PRO SnapFX FX895E Clippers
• BaByliss PRO 4-in-1 Blade Care Spray
• Wahl Blade Lubricating Oil, 100 ml

ProBeauty Tip. Let your wrist follow the curve of the blade: use short, arcing, bottom-to-top motions. This way, you make full use of the crescent shape without pressing the clipper against your head.

BaByliss PRO Graphite Fade FX8010BME is a 45 mm graphite-coated replacement fade blade for hair clippers in the FX8700 and LO-PROFX FX825E series. The cutting surface is flat and elongated, designed for vertical movement. It is ideal for fades and clean cuts.

What it does for you

• Cuts cleanly and precisely across its entire 45 mm width.
• Glides very smoothly: the graphite coating creates very little friction.
• Does not overheat because the blade operates at a lower temperature.
• Makes a quieter sound when cutting, according to the brand.
• Highly durable, as graphite is a very resilient coating.

How to use it at home

1. Turn off the hair clipper and set the fine adjustment lever on the left to the top position.
2. Loosen the screws with a screwdriver and set them aside.
3. Lift the old moving blade slightly and replace it with the new one on the oscillator.
4. Place the new fixed blade with the moving blade centered and parallel to it to avoid injury.
5. Secure the screws back in place.
6. Clean and maintain the blade regularly with BaByliss PRO 4-in-1 spray before and during use.

For which type of clipper

It fits hair clippers in the FX8700 (ChromFX, Boost+) and LO-PROFX FX825E series, as well as other clippers with a 2-hole blade system. It is not designed for SkeletonFX trimmers, which use 40 mm T-blades.

Specifications

What else you need

• BaByliss PRO Boost+ Metal Gold FX8700GBPE Hair Clipper
• BaByliss PRO ChromFX FX8700E Hair Clipper
• BaByliss PRO 4-in-1 Blade Care Spray
• Wahl Blade Lubricating Oil, 100 ml

ProBeauty Tip. If you cut many clients in a row, the graphite blade stays cooler, but it still needs spray between clients: spray it, let the clipper run for a few seconds, and wipe off the excess.

The BaByliss PRO M1344E Hair Straightener Case is where you keep your hair straightener between uses. It keeps it safe from dust and bumps, whether in a drawer or in your luggage. It is a storage accessory: it does not cool the straightener and does not replace the heat pad.

What it does for you

• The straightener stays protected from dust between uses.
• The plates won't get scratched by other objects in the drawer or bag.
• It's easy to take with you on trips, without having to figure out how to pack it.
• The cord and straightener stay together, ready to use next time.

How to use it at home

1. After styling, turn off the straightener and unplug it.
2. Let it cool completely on a heat-resistant surface.
3. Close the plates and lock them with the locking system, if the straightener has one.
4. Neatly coil the cord without bending it where it exits the straightener.
5. Place the straightener in the case and keep it in a dry place.

For what type of device

For hair straighteners, according to the product name. The brand does not publish the case dimensions, so we cannot guarantee that every model will fit. If you have a wide straightener, over 30 mm, write us the model and we will check before you order.

What else you need

• BaByliss PRO Elipsis 3000 Professional Hair Straightener
• BaByliss PRO Elipsis 3100 Hair Straightener
• Osis+ Flatliner Heat Protection Serum

ProBeauty Tip. The cord most often breaks where it exits the straightener. When you put the straightener in the case, make a loose loop with the cord, do not wrap it tightly around it.

The Panasonic Professional WER9340 is the original replacement blade for the Panasonic ER-RZ10 clipper. Install it when the old blade no longer cuts cleanly. The clipper remains the same; only the cutting part is new.

What it does for you

• Clean cut again: a new blade catches the hair on the first pass without pulling it.
• Original Panasonic part: WER9340 is the code assigned by Panasonic for the ER-RZ10.
• No need to replace the entire clipper: replace only the worn blade and keep the device you know.
• Stress-free use on the skin: dull blades pull the hair, while new ones glide more easily.

How to use it at home

1. Turn off the clipper and unplug it or remove it from the charging stand.
2. Remove the old blade exactly as shown in the ER-RZ10 clipper manual.
3. Use the small brush to remove any hair left in the blade holder.
4. Mount the new blade in the same position and make sure it is securely fixed, without any play.
5. Apply a drop of oil to the teeth and turn on the clipper for a few seconds to spread the oil.

For which type of clipper

Panasonic specifies it for a single model: the ER-RZ10 clipper. Do not use it with other Panasonic clippers, even if they look similar. If you are not sure which model you have, check the label on the bottom of the clipper or in the manual, where the ER code is listed.

Specifications

What else you need

• Oil for clipper blades
• Spray that cools and cleans the blades
• 4-in-1 spray for maintaining clippers

ProBeauty tip. Keep the old blade until you see that the new one works well. After each use, brush the hair off the blades and apply a drop of oil so the new blade stays sharp longer.

The BaByliss PRO Power Definer FX672ME is a replacement blade sold for the BaByliss PRO FX672E Power Definer clipper. Out of the box, the FX672E comes with a 45 mm stainless steel blade that has been diamond-sharpened. When the blade no longer cuts cleanly, you replace it, and the clipper works like new again.

What it does for you

• It restores a clean cut, without pulling hairs or leaving them uncut.
• It extends the life of your clipper: you only replace the worn blade, not the entire device.
• It saves you a trip to the service center, because you can install it yourself.
• It preserves the clipper's length settings, provided you install the blades correctly aligned.

How to use it at home

1. Turn off the clipper and unplug it or remove it from the charging stand.
2. Release the old blade as shown in the clipper's manual, and remove the old set.
3. Position the new set with the moving blade centered and parallel to the fixed blade, then secure it in place.
4. Apply a few drops of oil to the teeth.
5. Turn on the clipper for a few seconds and check the cut on a test strand of hair.

For which type of device

It is sold for the BaByliss PRO FX672E Power Definer clipper, an older model, corded or cordless. We did not find a BaByliss PRO data sheet that lists other compatible models, so if you have a different clipper, write us the code before ordering.

What else you need

• BaByliss PRO 4-in-1 Blade Care Spray
• Wahl Oil for lubricating blades, 100 ml
• Wahl Blade Ice Spray for cooling and cleaning blades

ProBeauty Tip. Because the FX672E is an older model, keep the old blade until you check that the new one cuts cleanly. Lubricating it after every day of use extends its life.

Wahl No. 3 Black 10 mm Guard is the standard Wahl 10 mm guard, sold separately. Wahl says that No. 3 leaves approximately 10 mm of hair, for a short, classic haircut. Get it to replace a lost or broken one, or to have a second one on hand.

What it does for you

• Cuts uniformly at 10 mm over the entire area you pass over with the clipper.
• Use it for a short, classic haircut.
• Complete your set without having to buy all 8 guards again.
• Works with several Wahl clippers: the brand lists it as compatible with 8 models, from the Super Taper to the Balding.

How to use it at home

1. Turn off the clipper and brush the hair off the blade.
2. Place the guard on the blade and press down until it clicks into place. Check that it is secure before turning it on.
3. Cut against the direction of hair growth, using even strokes.
4. Pass over the same area several times to catch the lying hairs.
5. After cutting, clean it with a small brush. From time to time, wash it with warm water and mild soap and let it dry completely.

For what type of clipper

Wahl lists it as compatible with the Super Taper, Super Taper Cordless, Legend, Legend Cordless, Senior Cordless, Magic Clip, Magic Clip Cordless, and Balding. You receive a single guard, not a set. It is not for outline clippers or clippers with slide-on guards, such as the Kuno or ChromStyle.

Specifications

What else you need

• Wahl No. 2 guard, shorter
• Wahl No. 4 guard, longer
• Complete Wahl Premium guard set
• Wahl Magic Clip Cordless clipper
• Wahl clipper blade oil

ProBeauty tip. No. 3 is a good starting point for the top. On the sides, go down to No. 2 (6 mm), then blend the areas with No. 3 held slightly at an angle.

The Wahl 8-piece black guard set includes plastic guards 1–8, from 3 to 25 mm. Attach them to the clipper to increase the cutting length and trim evenly to your chosen length. It is the basic set for trimming at home, with all the usual sizes.

What it does for you

• You have all the basic sizes: 3, 6, 10, 13, 16, 19, 22 and 25 mm.
• Trim evenly, because the guard keeps the blade at the same distance from the scalp.
• Create fades by moving from one size to the next.
• Replace lost or broken guards on your clipper all at once.

How to use them at home

1. Turn off the clipper and clear the hair from the blade.
2. Choose a size. If you are unsure, start with a larger one: you can always cut more off.
3. Place the guard on the blade and press until it clicks into place. Check that it is secure.
4. Cut against the direction of hair growth using even strokes.
5. After trimming, clean the guards with a small brush and keep them dry in a box or bag.

For which type of clipper

Wahl UK says that the set fits all taper clippers. It is not for outline clippers or clippers that use slide-on guards, such as Kuno or ChromStyle. If you do not know what type of blade your clipper has, message us the model before ordering.

Specifications

What else you need

• Wahl Super Taper Clipper
• Wahl Legend Clipper
• Wahl Magic Clip Cordless Clipper
• Wahl Clipper Blade Oil
• Wahl Fading Brush

ProBeauty Tip. All the guards are black, so lay them out on the table in order, from size 1 to size 8, before you start. When creating a fade, you change guards frequently, so this helps prevent accidentally picking a smaller size.

BaByliss PRO FX801JE is a taper replacement blade for the BaByliss PRO FreshFX clipper. It is made of Japanese steel with a PVD coating and has a crescent-shaped profile. Use it when your clipper blade has become dull, is pulling hair, or has been damaged.

What it does for you

• Your clipper cuts cleanly again, without pulling hair.
• Follows the movement of your hand: the crescent profile helps with the outward motion used for transitions.
• Resists wear and corrosion thanks to the Japanese steel and PVD coating.
• Suitable for fades, transitions, and clipper-over-comb cutting.

How to use it at home

1. Check your clipper model: the blade is for the BaByliss PRO FreshFX.
2. Turn off the clipper and remove it from the charger.
3. Unscrew the old blade and use the brush to remove all hair from underneath.
4. Position the new blade, align the moving blade with the fixed one, and tighten the screws without forcing them.
5. Apply 2 or 3 drops of oil to the blade and run the clipper for a few seconds.

For which clipper

For the BaByliss PRO FreshFX clipper. If you have another FX series model and want to install it on that, write us your clipper code before ordering and we will confirm if it fits.

Specifications

What else you need

• BaByliss PRO FreshFX clipper
• Blade oil
• Wahl Blade Ice spray for cooling the blades

ProBeauty tip. After installation, check the alignment: the moving blade should sit slightly behind the fixed one across its entire width. If it protrudes forward, the clipper will scratch the skin.

BaByliss PRO Avanzato is a 2300 W hair dryer with a long-lasting digital motor and ionic technology. It weighs just 365 g and is 195 mm long. It is for you if you dry your hair often or work with it for many hours and want a lightweight device with constant airflow.

What it does for you

• It won't tire your hand: 365 g, compact and balanced body.
• Dries consistently: 148 km/h, 80.6 m³/h airflow and 1198 Pa pressure.
• Reduces frizz and leaves hair smooth and shiny thanks to ionic technology.
• Adapts to your hair, with 2 speeds and 3 temperatures.
• Sets the style with the lockable cool air button.
• Works precisely, with 2 narrow nozzles measuring 6 × 60 mm and 6 × 75 mm.

How to use it at home

1. Towel-dry your hair and apply heat protection to the lengths.
2. Choose the speed and temperature. For fine hair, start on the lowest setting.
3. Dry the roots without a nozzle, then attach the nozzle for blow-drying.
4. Work on sections with a round brush, directing the air from the roots to the ends.
5. Set each section with cool air, then unplug the dryer.
6. Regularly clean the removable rear filter.

For what hair type

It works on all hair types because you can adjust the speed and temperature separately. It is especially suitable for short and medium hair and for blow-drying. If you have very long and thick hair or want a diffuser included, check out Poderoso, which has a higher airflow.

Specifications

What else you need

• Wella EIMI Thermal Image Heat Protection Spray
• Olivia Garden Expert Blowout Shine 35 mm Round Brush
• Hair Clips
• BaByliss PRO Poderoso 2400 W Hair Dryer, with Diffuser and Turbo Function

ProBeauty Tip. At 365 g, Avanzato is easy to hold above your head. Take advantage of this and dry the roots from the neck up for volume before moving on to the lengths.

The BaByliss PRO Poderoso is a 2400 W hair dryer with a long-lasting digital motor and a Turbo function that increases the air speed to 186 km/h. It weighs 400 g and comes with 3 nozzles, a diffuser, and a noise reducer. It's for you if you have long or thick hair and want to dry it quickly without a heavy device in your hand.

What it does for you

• Dries quickly: 186 km/h, 96.5 m³/h airflow, and 1804 Pa pressure.
• Gives you an extra boost when you're in a hurry, with the Turbo function, activated with a button.
• Doesn't tire your hand: 400 g and 200 mm long, with a compact and balanced body.
• Reduces frizz and leaves hair shiny, thanks to ionic technology.
• Works more quietly, with the noise reducer included.
• Does both curls and smooth brushing: 150 mm diffuser with a locking system and 3 concentrator nozzles.

How to use it at home

1. Towel-dry your hair and apply heat protection to the lengths.
2. Choose one of the 2 speeds and 3 temperatures. For fine hair, start on the low setting.
3. Dry the roots first, then attach the appropriate nozzle: the 6 × 75 mm one for wide sections, the 4 × 70 mm one for precise work.
4. Work on sections, with the brush, directing the air from the roots to the ends.
5. For curls, attach the diffuser and dry on low speed, without pulling the hair with your hand.
6. Set the shape with cool air. The button can be locked, so you don't have to keep it pressed.
7. Regularly clean the removable filter on the back.

For what type of hair

It works on all hair types, because you adjust the speed and temperature separately. You'll feel it most on long, thick, or hard-to-dry hair, where the Turbo function shortens the time. For curly hair, you have the diffuser in the package.

Specifications

What else you need

• Wella EIMI Thermal Image heat protection spray
• Olivia Garden Expert Blowout Shine 55 mm round brush, for long hair
• Olivia Garden Expert Blowout Shine 35 mm round brush
• Hair clips

ProBeauty tip. Keep the Turbo function for the beginning, when the hair is wet. Towards the end, switch to low speed and cool air, to close the cuticle and preserve the shine.

The Wahl 5 Star Hi-Viz Nightshade cordless trimmer is the limited-edition, black version of the Hi-Viz trimmer. It comes with the new Hi-Viz 2.0 blade, a hybrid T-blade: with it you remove bulk and create fine details, without changing the device. It is designed for barbers and for those who trim their own beards.

What it does for you

• A single device for bulk and details: the Hi-Viz 2.0 blade is optimized for removing bulk, but remains precise on contours.
• See exactly where you cut: the thin neck of the device leaves the working area visible.
• Clean lines: the blade is adjustable to zero-gap, for contours very close to the skin.
• Blade that stays cool, thanks to the DLC coating.
• Short charging times: a full charge takes 45 minutes.

How to use it at home

1. Fully charge the device before first use.
2. Put a drop of oil on the blade and turn on the device for a few seconds, so the oil distributes.
3. For contouring, hold the blade perpendicular to the skin and work with short, top-to-bottom strokes.
4. For details and lines, slightly tilt the device and use only the corner of the blade.
5. After use, clean the hair from the blade with the brush and put a drop of oil on it again.

For what type of work

For contours, lines, beard finishing, and designs in the hair. The T-blade is wide, so it also works for removing bulk on small areas, such as the nape of the neck or sideburns. For cutting the whole head you need a hair clipper with attachable guards.

Specifications

What else you need

• Wahl Hi-Viz T-Wide replacement blade
• Wahl blade oil
• Wahl Blade Ice spray for cooling the blades
• Wahl neck brush

ProBeauty tip. The zero-gap adjustment brings the blade very close to the skin. Make the first passes gently, on a small area of the neck, so you can see how it cuts, then move on to the face contour.

The Moser Li+Pro Mini Cordless Trimmer 1584-0050 is Moser's small trimmer that can be used corded or cordless. It features a German-made stainless steel STAR BLADE II blade that cuts at 0.4 mm and weighs approximately 120 g.

What it does for you

• Trimming very close to the skin: the STAR BLADE II blade cuts at 0.4 mm over a width of 32 mm.
• Work corded or cordless: the lithium-ion battery lasts up to 75 minutes.
• Charges quickly, in approximately 45 minutes, with no memory effect.
• Constant power: the chip-controlled motor maintains the same cutting power.
• Easy-to-remove blade, for cleaning and quick replacement with optional Carving or Designer blades.
• Lightweight and quiet, with a one-piece housing.

How to use it at home

1. Charge the trimmer on the stand. The LED in the button shows the charging status.
2. Put a drop of oil on the blade and run the trimmer for a few seconds.
3. For trimming, hold the blade perpendicular to the skin and work in short strokes.
4. For a short beard, attach the adjustable 3–6 mm comb.
5. After use, clean the blade with the brush and re-oil it.

For what type of work

For trimming contours, the neck, sideburns, mustache, and short beards, at the barbershop or at home. It is small and lightweight, so it easily reaches around the ears. For cutting the whole head, you need a hair clipper with a wide blade and longer combs.

Specifications

What else you need

• Wahl blade oil
• Wahl Blade Ice spray for cooling the blades
• Wahl neck strap
• Moser Li+Pro Mini 1584-7050 replacement motor

ProBeauty tip. When the battery life starts to visibly decrease, don't blame the battery: the Moser manual states that a dirty blade and a clogged housing opening shorten the operating time. Clean them and check again.

The GA.MA GBS Ultra Skill is the hair clipper from the GBS Ultra line, with a sintered PRO F-Wedge blade coated with DLC, and a 9300 rpm motor. It works corded or cordless, with a lithium battery and USB charging. It is made for cutting a lot of hair, fades, and finishing.

What it does for you

• Smooth cut, with little friction: the PRO F-Wedge blade has a DLC coating and withstands daily use.
• Constant power: the 9300 rpm motor cuts evenly when you shorten, when you make transitions, and when you finish.
• Controlled fades: 5 blade positions, between 0.3 and 2.4 mm, without a comb.
• Many lengths: 6 guide combs, from 1.5 to 13 mm.
• Work freely: up to 90 minutes cordless, and when it runs out of battery, it also works corded.

How to use it at home

1. Charge it fully on the charging base, via USB, before the first haircut.
2. Put a few drops of oil on the blade, turn it on for a few seconds, and wipe off the excess.
3. On dry hair, shorten first with a longer comb, then gradually go down.
4. For fade transitions, remove the comb and work with the blade adjustment, from bottom to top.
5. At the end, brush the hair between the blades and put the machine back on the base.

For what type of haircut

For fades, tapers, blending between lengths, and short haircuts up to 13 mm with a comb. It works for cutting a lot of hair and for finishing. For very precise lines at the temples and on the beard, a good pair is an outline trimmer, such as the GBS Ultra T-Blade.

Specifications

What else you need

• GA.MA GBS Ultra T-Blade outline trimmer
• GA.MA GBS Ultra Zero finishing machine
• Blade oil 100 ml
• Blade cooling and cleaning spray
• Fade brush
• Hairdressing cape

ProBeauty tip. For a clean fade, first mark the guide line with the blade open at 2.4 mm. Then gradually close the blade towards 0.3 mm only under the line, with short movements, in a spoon shape.

The JRL Ghost Forte Pro 2020H is the white set with the Forte Pro 2020H dryer, a JRL round brush, and an anti-static paddle brush. The dryer has a brushless motor, 2150 W, ions, and self-cleaning. It is for you if you want to detangle, dry, and brush your hair with the same set.

What it does for you

• Dries quickly: brushless motor and 2150 W, with a powerful airflow.
• Less frizz: the ion generator reduces frizz, static, and drying time.
• Settings that are saved: 3 temperatures, 3 speeds, and cool air, saved for the next start.
• Easy-to-maintain filter: the filter is washable, and the self-cleaning reverses the turbine and blows the dust out.
• You know when it needs cleaning: the JRL LED shows you the dryer's status.
• Detangles without pulling: the paddle brush has ball-tipped bristles and reduces static.

How to use it at home

1. Towel-dry your hair and apply heat protection to the lengths.
2. First dry the roots on high speed, without a nozzle.
3. Choose the temperature and speed; the dryer remembers them for the next start.
4. For brushing, attach the concentrator and work in sections, with the round brush from the set.
5. Blast with cool air at the end to set the style.
6. When the LED shows you, clean the filter or start the self-cleaning.

For what type of hair

With 3 temperatures and 3 speeds, you can adjust it to your hair. On fine or bleached hair, use the lowest heat setting. The ions help with frizz and static, so it is also good for hair that gets easily weighed down. The diffuser included in the box helps you create curls.

Specifications

What else you need

• Wella EIMI Thermal Image Heat Protection Spray
• ETB Hair Stylesse Shield Smooth Heat Protection Spray
• Olivia Garden Nano Thermic 55 Round Brush for Brushing
• JRL Forte Pro 2020H Black Set, with 2 Brushes
• JRL Forte Pro 2020H Sunset Sapphire Set, with 2 Brushes

ProBeauty Tip. First detangle wet hair with the paddle brush, from the ends to the roots. Only then switch to the round brush and start brushing.

The GA.MA GBS Ultra Fade is the fade clipper from GA.MA's GBS Ultra line, the Gama Barber Series hair styling line. Its name says what it's designed for: fades, meaning smooth transitions from very short to longer hair. In the same line, you'll find the Ultra T-Blade and Ultra Zero outline trimmers for lines and finishing.

What it does for you

• Smooth transitions between lengths: it's the fade clipper of the GBS Ultra line.
• Short haircuts with smooth transitions: use it on the sides and at the nape of the neck.
• Complete hair styling set: it pairs perfectly with the Ultra T-Blade for outlining and the Ultra Zero for finishing.
• Easy maintenance: brush and oil after every haircut.

How to use it at home

1. Read the manual in the box before first use and prepare the clipper exactly as instructed.
2. Put a few drops of oil on the blade, turn the clipper on for a few seconds, and wipe off the excess.
3. On clean, dry hair, first cut the entire side area to a longer length.
4. Gradually move down to shorter lengths, each pass slightly lower than the previous one, to avoid leaving steps.
5. Finally, brush the hair between the blades, apply oil, and store it in a dry place.

For what type of haircuts

For fades, short sides, and modern haircuts with smooth transitions between lengths. For fine lines at the temples, nape of the neck, and beard, use an outline trimmer. If you need technical details, such as cutting lengths or power supply, write to us before ordering and we'll tell you what we find in the manual in the box.

Specifications

What else you need

• GA.MA GBS Ultra T-Blade Outline Trimmer
• GA.MA GBS Ultra Zero Finishing Clipper
• 100 ml blade oil
• Blade cooling and cleaning spray
• Fade brush
• Hairdressing cape

ProBeauty tip. Do the fade in good light, with a hand mirror for the nape of the neck. After each pass, comb the hair upwards with the fade brush and see where a step remains. Go over that area one more time, short.

The GA.MA GBS Ultra Smooth is the hair clipper from GA.MA's GBS Ultra line, the Gama Barber Series hairdressing line. It is designed for even cuts and clean transitions between lengths. Complete it with the Ultra T-Blade for outlining and the Ultra Zero for a close-to-skin finish.

What it does for you

• Even cuts: cut evenly across the entire area you are working on.
• Clean transitions: use it for blending between lengths.
• Part of a hairdressing set: it pairs perfectly with the outlining and finishing clippers from the same line.
• Easy maintenance: brush and oil after each cut.

How to use it at home

1. Read the manual in the box before first use and prepare the clipper exactly as instructed.
2. Put a few drops of oil on the blade, turn on the clipper for a few seconds, and wipe off the excess.
3. On clean, dry, and combed hair, work against the direction of growth with slow movements.
4. Start with the longest length you want and go down only where you want shorter hair.
5. At the end, brush the hair between the blades, apply oil, and keep it in a dry place.

For what type of cuts

For short and medium cuts, an even haircut, short sides, and clean transitions between lengths. For fine lines and outlining, use an outlining clipper. If you need technical details, such as cutting lengths or power supply, write to us before ordering and we will tell you what we find in the manual in the box.

Specifications

What else you need

• GA.MA GBS Ultra T-Blade Outlining Clipper
• GA.MA GBS Ultra Zero Finishing Clipper
• Blade Oil 100 ml
• Blade Cooling and Cleaning Spray
• Fade Brush
• Hairdressing Cape

ProBeauty Tip. At the crown, where the hair grows in a whorl, change the direction of the clipper with each pass. This way you catch the flat hair and the cut comes out even.

JRL Forte Pro 2020H Sunset Sapphire is the set with the blue Forte Pro 2020H dryer and 2 JRL round brushes. The dryer has a brushless motor, 2150 W, ion generator and self-cleaning. It is for you if you want a fast dryer, in a color that stands out.

What it does for you

• Dries quickly: brushless motor and 2150 W, with a powerful airflow.
• Less frizz: the ion generator reduces frizz, static electricity and drying time.
• Settings that are saved: 3 temperatures, 3 speeds and cool air, saved for the next start.
• Easy-to-maintain filter: the filter is washable, and the self-cleaning reverses the turbine and blows the dust out.
• You know when it needs cleaning: the JRL LED shows you the dryer's status.
• Easier brushing: the JRL round brushes have a ceramic cylinder with graphene and mixed bristles, for tension and volume.

How to use it at home

1. Towel-dry your hair and apply heat protection to the lengths.
2. First dry the roots on high speed, without a nozzle.
3. Choose the temperature and speed; the dryer remembers them for the next start.
4. For brushing, put on the concentrator and work on sections, with the round brush from the set.
5. Apply cool air at the end, so the style sets.
6. When the LED shows you, clean the filter or start the self-cleaning.

For what type of hair

With 3 temperatures and 3 speeds, you adjust it to your hair. On fine or bleached hair, work on the low heat setting. Ions help with frizz and static electricity, so it is also good for hair that gets easily poofy. The diffuser in the box helps you with curls.

Specifications

What else you need

• Wella EIMI Thermal Image Heat Protection Spray
• ETB Hair Stylesse Shield Smooth Heat Protection Spray
• ETB Hair Paddle Brush for detangling
• JRL Forte Pro 2020H black set, with 2 brushes
• JRL Ghost Forte Pro 2020H white set, with 2 brushes

ProBeauty tip. The cylinder of the JRL brushes changes color from black to gold when it heats up. When you see gold, move the brush to another section.

The GA.MA Tempo 5D Sensi Black hair dryer is designed to protect the scalp and hair that loses its shine due to external factors. It has 2200 W, a ceramic interior, and 5D Ultra Ozone Ion Protect technology.

What it does for you

• Dries quickly: the AC motor has 2200 W.
• Get rid of frizz: the ozone and ions released while drying make the hair look healthier and shinier.
• The scalp stays clean: GA.MA says that the 5D technology removes excess sebum and impurities.
• Gentler heat, thanks to the ceramic interior coating.
• You have 6 combinations of 3 temperatures and 2 speeds, plus cool air for setting.
• It is easy to maintain: the filter is removable for cleaning.

How to use it at home

1. Apply a heat protectant to towel-dried hair.
2. Turn it on at high speed and dry the roots without an attachment.
3. Attach the nozzle for brushing, for sections, with the round or flat brush.
4. For volume and curls, switch to the diffuser.
5. Set the style with cool air.
6. Finally, hang it up or store it in the pouch and clean the filter regularly.

For what type of hair

It is suitable for anyone who wants shiny, frizz-free hair, especially if the hair looks tired and dull. For fine or colored hair, use the low temperature. For thick and long hair, use the high speed and the nozzle.

Specifications

What else you need

• Olivia Garden Ceramic+Ion SpeedXL 45 round brush, for brushing
• Olivia Garden Nano Thermic flat brush, for drying and straightening
• Wella EIMI Thermal Image heat protectant spray
• Clips for sectioning hair
• ETB Hair Stylesse Shield heat protectant spray

ProBeauty tip. Dry the hair in sections held with clips, from bottom to top. Each strand gets direct air and you finish faster.

GA.MA GBS Ultra Zero is the finishing machine in the GBS Ultra line, with a sintered PRO blade in a balding design, coated with DLC. The motor has 9300 rpm, and the minimum cutting length is 0.3 mm. It works corded or cordless, with a lithium battery and USB charging.

What it does for you

• Very close-to-skin cut: the balding blade goes down to 0.3 mm.
• Clean lines: it is made for contours, edges, and finishes.
• Reduced friction: the DLC layer keeps the blade sharp and resistant for longer.
• Equal power on any hair: the 9300 rpm motor cuts consistently.
• Work corded or cordless: up to 90 minutes on battery, with USB charging.

How to use it at home

1. Charge it on the charging base, via USB, before first use.
2. Put a few drops of oil on the blade, run it for a few seconds and wipe off the excess.
3. On short and dry hair, draw the lines with the blade lightly supported, without pressing.
4. For light touch-ups, attach the 1.5 or 4.5 mm comb.
5. At the end, brush the hair between the blades and apply oil again.

For what type of work

For finishing a fade down to almost the skin, contours, the neckline and clean edges on the beard. It is not made for cutting the whole head: for that you use a hair clipper, such as the GBS Ultra Skill, and finish with the Ultra Zero.

Specifications

What else you need

• GA.MA GBS Ultra Skill hair clipper
• GA.MA GBS Ultra Fade hair clipper
• Blade oil 100 ml
• Blade cooling and cleaning spray
• Fade brush

ProBeauty tip. Use the Ultra Zero at the end, only on the last centimeter of the fade. Gently stretch the skin with the free hand: the balding blade cuts more evenly and does not snag.

JRL Forte Pro 2020H Black is a set with the black Forte Pro 2020H hair dryer and 2 JRL round brushes. The dryer has a brushless motor, 2150 W, ions, and self-cleaning. It is for you if you want to do a blowout at home with everything you need in a single box.

What it does for you

• Dries quickly: brushless motor and 2150 W, with a powerful airflow.
• Less frizz: the ion generator reduces frizz, static, and drying time.
• Settings that are saved: 3 temperatures, 3 speeds, and cool air, saved for the next start.
• Easy-to-maintain filter: the filter is washable, and the self-cleaning feature reverses the turbine and blows the dust out.
• You know when it needs cleaning: the JRL LED shows you the dryer's status.
• Easier blowout: the JRL round brushes have a ceramic-graphene cylinder that distributes heat evenly.

How to use it at home

1. Towel-dry your hair and apply heat protection to the lengths.
2. First, dry the roots on high speed, without the nozzle.
3. Choose the temperature and speed; the dryer remembers them for the next start.
4. For a blowout, attach the concentrator and work in sections, with the round brush from the set.
5. Apply cool air at the end so the style sets.
6. When the LED shows you, clean the filter or start the self-cleaning feature.

For what type of hair

With 3 temperatures and 3 speeds, you can adjust it to your hair. For fine or bleached hair, use the low heat setting. The ions help with frizz and static, so it is also good for hair that gets easily unruly. The diffuser in the box helps you with curls.

Specifications

What else you need

• Wella EIMI Thermal Image Heat Protection Spray
• ETB Hair Stylesse Shield Smooth Heat Protection Spray
• ETB Hair Paddle Brush for detangling
• JRL Forte Pro 2020H Sunset Sapphire set, with 2 brushes
• JRL Ghost Forte Pro 2020H white set, with 2 brushes

ProBeauty tip. Use the large brush for volume at the roots and on the lengths. The small brush is for the fringe, short hair, and curled ends.

The GA.MA GBS Ultra T-Blade is the contour trimmer from the GBS Ultra line, with a sintered T-blade coated with DLC and a 9000 rpm motor. It cuts up to 0.2 mm and works corded or cordless. It charges via USB on the base included in the box.

What it does for you

• Lines very close to the skin: the T-blade cuts up to 0.2 mm.
• Precise and smooth cut: the PRO blades sintered with DLC have reduced friction.
• A blade that lasts: resistant to corrosion and wear, even in the humid air of a salon.
• Constant power: the 9000 rpm motor, for fades, tapers and details.
• Work freely: up to 60 minutes on battery, with USB charging.

How to use it at home

1. Charge it on the charging base via USB before first use.
2. Put a few drops of oil on the blade, turn it on for a few seconds and wipe off the excess.
3. For contouring, work without a comb, on dry hair, with the blade lightly supported on the skin.
4. For a short and even beard, attach the 2, 3 or 3.5 mm comb.
5. At the end, brush the hair out from between the blades and put the machine back on the base.

For what type of work

For contours at the neck and temples, the beard line, sideburns and details in short hair. The combs make it good for very short beards too. For actual haircutting, you use a hair clipper, such as the GBS Ultra Skill.

Specifications

What else you need

• GA.MA GBS Ultra Skill hair clipper
• GA.MA GBS Ultra Fade hair clipper
• Blade oil 100 ml
• Blade cooling and cleaning spray
• Fade brush

ProBeauty tip. For the hairline and temples, turn the machine with the blade facing down and work only with the corner of the T-blade. Make the line with several short passes, not in one long movement.

GA.MA Tempo 5D Sensi Gold is the hair dryer from the Sensi line, with 2200 W of power and a ceramic-coated interior. The 5D Ultra Ozone Ion Protect technology releases ozone and ions while drying, so your hair comes out shiny and frizz-free.

What it does for you

• Dries quickly, with the 2200 W AC motor.
• Leaves hair shinier and frizz-free, thanks to the ozone and ions released during styling.
• Cleanses excess sebum from your scalp and removes impurities that clog pores, as described by GA.MA's 5D technology.
• Gentle on your hair: the ceramic interior coating provides a gentler heat.
• You choose your setting from 6 combinations of 3 temperatures and 2 speeds.
• Your hairstyle lasts longer if you set it with the cool air.

How to use it at home

1. Towel-dry your hair and apply a heat protectant.
2. First, dry the roots without an attachment, on high speed.
3. For blow-drying, attach the nozzle and work in sections with the round brush.
4. For curls, attach the diffuser and dry your hair while holding it in your palm.
5. Finish each section with the cool air button.
6. Hang it by the cord or store it in the pouch. Clean the removable filter occasionally.

For what hair type

It is made for anyone who wants to protect their scalp and hair that has lost its shine. It also works on hair that frizzes easily. For fine hair, choose the low temperature, and for thick hair, the high speed.

Specifications

What else you need

• Olivia Garden Ceramic+Ion SpeedXL 45 round brush, for blow-drying
• Olivia Garden Nano Thermic paddle brush, for drying and smoothing
• Wella EIMI Thermal Image heat protectant spray
• Hair sectioning clips
• ETB Hair Stylesse Shield heat protectant spray

ProBeauty tip. Keep the nozzle one palm's length away from the scalp and move the dryer continuously. The scalp won't overheat, and the hair will dry evenly.

The Wahl 5 Star Vapor CE is the Championship limited edition of the Vapor clipper, with a design inspired by sports competitions. It retains the 8000 rpm brushless motor and features the F32 Fadeout blade with Drift technology. It is for those who do short fades and want a lightweight, collectible clipper.

What it does for you

• Cooler blade under pressure: Drift technology adds oil channels to the top blade and reduces friction.
• No snagging: the zero-gap adjustable blade has 32 fine, rounded teeth that glide over pores.
• Sharper blades: carbon steel with black chrome PVD and DLC, sharpened up to 4 times more.
• The same power on any hair: the brushless motor with Adaptive Speed Control maintains 8000 rpm.
• Work a lot on a single charge: 150 minutes of cutting time after 60 minutes of charging.
• Easy control: 280 g, metal lever, and non-slip grip.

How to use it at home

1. Charge it fully before first use, with the clipper turned off.
2. Put a few drops of oil on the blade to fill the Drift channels.
3. Attach the guide comb with the clipper turned off.
4. For the bald area, work without a comb, with the blade set to short. Then move up with the lever and combs.
5. When the battery runs low, connect the charger and continue.
6. At the end, clean the blades with the brush and oil the blade again.

For what type of haircut

Wahl makes it for bald fades, skin fades, and transitions from bald to fade, on all hair types and textures. For adding volume to long hair, a clipper with a Taper or Wedge blade works faster.

Specifications

What else you need

• Wahl Single Power Station charging station
• Wahl blade oil
• Wahl Blade Ice spray for cooling the blades
• Wahl fade brush
• Wahl barber cutting cape

ProBeauty tip. The Drift blade oil channels only work if they contain oil. Put two or three drops on the top blade before each client and wipe off the excess.

Attention! The product may have an opened or damaged package and may show minor signs of use or small scratches that do not affect its functionality!

The Wahl Legend hair clipper is the ideal choice for professionals seeking power and precision in hairstyling. Equipped with a powerful DC motor that reaches 6000 revolutions per minute, the Legend ensures excellent performance and fast cuts. Its elegant and functional design, along with adjustable cutting lengths from 0.8 mm to 2.5 mm, makes this device a versatile tool for any beauty salon.

Technical Information:

• DC Motor 6000 rpm
• Adjustable cutting length: 0.8 mm - 2.5 mm
• Cutting width: 40 mm
• Cable: 4 m

Package contains:

• Hair clipper
• 8 Premium guide combs: 0.5 (1.5 mm), 1 (3.00 mm), 1.5 (4.5 mm), 2 (6.00 mm), 3 (10 mm), 4 (13 mm), 6 (19 mm), 8 (25 mm)
• Cleaning brush
• User manual
• Lubricating oil
• Usage instructions

The Wahl Legend hair clipper is a top-tier tool for hairstyling professionals, combining power and precision in a single device. Equipped with an extremely powerful DC motor that reaches 6000 revolutions per minute, the Legend ensures exceptional performance and fast cuts, ideal for any hairstyle.

Its elegant and ergonomic design allows for easy handling, making it perfect for both professional and home use.

Advanced features include adjustable cutting lengths from 0.8 mm to 2.5 mm and Fade cutting technology, which guarantees smooth transitions between lengths.

The clipper is equipped with a high-precision metal blade and comes with 8 guide combs for various cutting lengths, along with a brush for easy cleaning.

Weighing 651 grams and with a 4-meter long cable, the Wahl Legend offers freedom of movement and comfort of use. Compatible with a global voltage of 100-240V / 50-60 Hz, it is ideal for any salon or international use.

Premature wear of clipper blades:

Generally, physical wear can occur for several reasons. Most often, it happens due to incorrect use or failure to follow essential maintenance steps. Among the most common, we can mention: -lack of lubricant film on the blade surface -rapid overheating during operation -wear of the plastic guide -presence of residues (fur/hair, metals, dust, and other foreign materials) between the lower and upper blade. We recommend using cooling and lubricating spray between haircuts and for proper maintenance.

Correct maintenance of clipper blades:

Clipper blades must be lubricated with a special oil designed for them before, during, and after use. If the blades leave a streak or seem to slow down the clipper, they need screw adjustment, tension spring or plastic guide check, and oil lubrication. The procedure involves applying a few drops of oil to the front of the blades and on the moving parts. Excess oil should be wiped off immediately with a dry, clean cloth. When not in use, clipper blades should be stored in a special dry box or in the packaging in which they were purchased.

Wahl Legend+ Olive Green Limited Edition – Professional Hair Clipper

A powerful, all-metal professional clipper designed for fades, blending, and fast bulk removal.

Take your fade and blending techniques to the next level with the Wahl Legend+™ Limited Edition Cordless Clipper. Designed for professional barbers who need versatility, power, and precision, the Legend+™ features a premium all-metal housing, an upgraded high-performance motor, and the advanced Wedge® Blade, enabling efficient bulk removal and smooth fades with seamless transitions.

Ideal for longer-length fades, tapering, and clipper-over-comb techniques, the Legend+™ delivers the control and consistency needed for flawless results every time.

Key Features

• Advanced Wedge® Blade – designed for smooth hair feeding and exceptional cutting precision, making it easier to create seamless transitions and perfect fades.
• Crunch Blade™ Technology – produces a distinctive sound during cutting, allowing you to hear the cut hair and ensure no areas are missed.
• Premium all-metal housing – built for professional durability, with a balanced weight that enhances control and comfort during use.
• Powerful 6,500 RPM rotary motor – delivers consistent performance for fast bulk removal and even fades.
• Titanium and DLC (Diamond-Like Carbon) coated blades – made from high-carbon steel, offering exceptional durability and corrosion resistance while maintaining sharpness for up to 4 times longer than standard steel blades.
• Extended fade range – designed for precise tapering and smooth transitions on longer hairstyles.
• Corded and cordless operation – maximum flexibility for cordless use or continuous operation when connected to a power source.
• Battery runtime: 80 minutes
• Weight: 404 g
• Cutting length: 0.7–1.7 mm

Package Contents

• 2 premium guide combs (1.5 mm and 3.5 mm)
• 5V power adapter
• Blade maintenance oil
• Cleaning brush
• Blade guard
• White styling comb

BaByliss PRO FreshFX is a cordless clipper with a 45 mm Japanese steel blade and a 6800 RPM DC motor. It is lightweight, weighing 275 g, and is designed for all experience levels. Charge it via USB-C.

What it does for you

• Uniform cutting with a corrosion-resistant Japanese steel blade and over 500,000 cutting strokes per minute.
• Control the length with a 5-position lever: 0.5 – 1.4 – 2.3 – 3.2 – 4.2 mm.
• Basic lengths with 8 guide combs included.
• Up to 120 minutes of cordless use, with 20 minutes of charging providing 20 minutes of cutting time.
• Won't slip from your hand: the handle is non-slip, with finger and thumb support.

How to use it at home

1. Charge it via the USB-C port on the base. The LED flashes while charging and stays lit when the battery is full.
2. Hold the clipper blade-down, away from your body, and put a drop of oil on the face and sides of the moving blade.
3. With the clipper turned off, place the comb on the blade face, slide it on, and press the back until it clicks.
4. Cut clean, dry, detangled hair. Moving the lever up shortens the cut, while moving it down lengthens it.
5. At the end, remove the combs and rinse them, then dry them thoroughly. Clean the blade with the brush and lubricate it.

For what type of haircut

It is suitable for short and medium haircuts, touch-ups, and your first fades if you are just learning to cut hair. For fine detailing around the neck and beard, its companion is the FreshFX trimmer.

Specifications

What else you need

• BaByliss PRO 4-in-1 blade spray
• Wahl blade oil
• FreshFX FX76E trimmer
• Straight cutting comb
• Wahl haircutting cape

ProBeauty tip. If you are just learning, start with the longest comb and gradually move down. It is easier to shorten it again than to fix a cut that is too short.