BaByliss PRO · 4Artists SkeletonFX

Attention! The product may have an opened or damaged packaging and may show minor signs of use or small scratches that do not affect its functionality!

BaByliss PRO Skeleton FX Gold Trimmer 4artists - Precision and Professional Performance

The BaByliss PRO SkeletonFX Gunsteel is an edger from the 4Artists line, with a 40 mm Japanese steel T-blade exposed along its entire length. See exactly where you cut from any angle, so hairline, beard, and hair designs come out clean. It works corded or cordless and comes with a charging stand.

What it does for you

• See the line you cut: the T-blade is exposed 360°, without a housing that blocks your view.
• Cut very close to the skin, because the blade adjusts to zero-gap with an included tool, without having to disassemble it.
• Work for about 120 minutes cordlessly after 3 hours of charging. A quick 30-minute charge gives you about 30 minutes of work.
• Always know how much you have left: the red LED flashes when there are approximately 10 minutes of battery life left.
• Keeps up with thick hair, with the EDM Technology digital motor at 7200 blade movements per minute.

How to use it at home

1. Before first use, charge it continuously for 3 hours. The battery reaches maximum capacity after 3 full charge and discharge cycles.
2. With the switch on 0, put a drop of oil on the blades and wipe off the excess with a dry cloth.
3. Work on dry and combed hair. For straight lines at the neck and temples, gently support the corner of the blade on the skin.
4. Around the ear and on the beard line, make short passes and check the line from the side after each pass.
5. At the end, remove the hair with the included brush and put a few drops of oil on the blades.
6. Place it in the stand with the switch on 0, so it charges.

For what type of work

It is designed for finishing: the hairline and temples, the beard line, the edges around the ears, designs and fine lines in short hair. It does not have guide combs, so you do not cut all your hair with it; for that you need a hair clipper.

Specifications

What else you need

• BaByliss PRO 4-in-1 spray for cleaning and cooling the blades
• Wahl oil for hair clipper blades
• Titanium T-Blade with 2.0 mm deep tooth FX707C2ZE, for FX7870
• Carbon finishing comb
• Wahl cutting cape

ProBeauty tip. The manual limits direct plug-in use to 20 minutes. If the battery ran out in the middle of an edging, put the machine in the stand for 30 minutes: it gives you about 30 minutes of work.

BaByliss PRO SkeletonFX GoldFX is a contour trimmer from the 4Artists line, with an all-metal gold casing and a 40 mm DLC/Titanium T-blade. The blade is exposed at 360°, so you can see the line from any hand position. It is for hairdressers and for those who trim their own contours and beards at home.

What it does for you

• See exactly where you cut: no casing covers the blade, so the line at the neck or beard remains visible.
• Cut cleanly and close to the skin, with the DLC/Titanium blade adjustable to zero-gap with the included tool.
• The blade stays cooler: the brand says that the exposed blade does not retain heat, and the DLC/Titanium layer works at a lower temperature.
• About 120 minutes cordless after 3 hours of charging, and when it runs out of battery you can work with a cord.
• Constant speed, with the digital EDM Technology motor at 7200 blade movements per minute.

How to use it at home

1. Before the first use, charge it for 3 hours uninterrupted. Maximum capacity appears after 3 charge and discharge cycles.
2. With the switch on 0, put a drop of the included oil on the blades and wipe off the excess.
3. Charging: connect the plug to the base of the machine and the adapter to the outlet. The LED flashes, and when it stays continuously lit, the battery is full.
4. Turn it on, then trace the line with the corner of the blade, in short movements, on dry and combed hair.
5. After use, clean the wires with the brush, put a few drops of oil and mount the blade protection cap.

For what type of work

It is suitable for contours at the neck and temples, the beard line, details around the ears, hair tattoos and fine lines. It does not have guide combs and is not made for shortening hair on the head; for that you use a hair clipper.

Specifications

What else you need

• BaByliss PRO 4 in 1 spray for daily blade cleaning
• Wahl oil for blades
• FX707ZE replacement blade, 40 mm T-blade
• Titanium T-blade with 2.0 mm deep tooth FX707G2ZE
• FX7870GBPBASE charging station for SkeletonFX
• Wahl haircutting cape

ProBeauty tip. When you redo the zero-gap, leave the black blade teeth 0.5–1 mm below the edge of the gold blade, as shown in the manual. Test on a small area of skin before the full contour.