Black Friday

The Italwax Nirvana Kit for lavender hair removal brings together three products from the Nirvana SPA line in one box: a massage candle, a bag of stretchy pearl wax, and a pre-hair removal oil, all with a lavender scent. It is designed for aromatic oil-based hair removal, and the box makes it suitable as a gift. Meanwhile, Italwax has renamed the Vanira line, but our box says Nirvana.

What it does for you

• The entire hair removal ritual in one box, with products designed to work together.
• Skin prepared with oil: the pre-hair removal oil gently prepares the skin and leaves it feeling silky afterwards, says Italwax.
• Wax for sensitive skin, with a synthetic base and lavender oil.
• A warm massage at the end: the candle melts into an oil that you spread over the skin.
• A relaxing lavender scent, which can be smelled from the heater until the end.

How to use it at home

1. Light the massage candle before you start.
2. Melt the wax in the heater at 38 °C.
3. Cleanse the skin, massage in a little pre-hair removal oil, and wipe off the excess with a tissue.
4. Apply the wax in any direction, leave a "petal" at the end, and, after a few seconds, pull it off parallel to the skin.
5. Blow out the candle and massage the hair-removed skin with the warm melted oil.

For what skin type and area

For sensitive skin, on the underarms, bikini area, legs, arms, and back. It is not a face kit. The heater and spatulas are not in the box, so check that you have them before hair removal.

Active ingredients

• Lavender oil: in Nirvana wax, for fragrance and a relaxing effect, says Italwax.

What else you need

• Wax heater with an 800 ml container
• Wooden wax spatulas
• Italwax Nirvana pre-hair removal oil with lavender
• Italwax post-hair removal oil with lemon

ProBeauty tip. Keep the pre-hair removal oil after you finish the wax from the kit: you can also find it separately, with the same lavender scent, and use it with a new bag of Nirvana wax.

The Puring Fruity Color Catalog with 88 shades is the color catalog for Fruity Color permanent hair dye, with fruit acids. The cover says Tuttocolors, the Puring coloring system it belongs to. You use it to choose the shade before ordering the dye.

What it does for you

• You choose the shade with your own eyes, not by the colors on the screen.
• You see the Fruity Color range in one place.
• You compare similar shades before ordering.
• You write down the exact code for future orders.
• You choose more confidently among the shades in the range, before ordering the dye.

How to use it at home

1. Look at the catalog in natural light, not in yellow evening light.
2. Compare the shades with your roots and hair lengths.
3. If you have a lot of white hair, start with a natural shade.
4. Write down the code and order the Fruity Color dye and Tuttocolors developer.

For what type of work

For choosing the shade before dyeing, especially if you are using Fruity Color for the first time. The catalog does not contain dye: it is just a tool for choosing the color, which you can keep for all future touch-ups.

What else you need

• Fruity Color Dye
• Tuttocolors 6% 20 vol Cream Developer
• Tuttocolors Dye Brush
• Tuttocolors Dye Bowl

ProBeauty Tip. Keep the catalog next to the mirror when you dye your hair. After rinsing, compare the result with the chosen shade and see if you need a lighter or darker one next time.

The Puring Flory Color Color Catalog with 68 shades is the color catalog for Flory Color permanent, ammonia-free hair dye. Use it to choose the right shade before ordering the tube of dye. The Flory Color range has 68 shades, all in a formula with chamomile extract.

What it does for you

• Choose the shade with your own eyes, not based on a picture on a screen.
• See the entire Flory Color range in one place.
• Compare similar shades so you don't order one that is too light or too dark.
• Write down the exact code and easily find it again for your next order.
• Choose more confidently among the range's ammonia-free shades.

How to use it at home

1. Look at the catalog in natural light, near a window.
2. Compare the shades with your hair, at the roots and along the lengths.
3. If you hesitate between two shades, choose the darker one.
4. Write down the code and order the Flory Color dye and Tuttocolors developer.

For what type of work

For choosing the shade before dyeing, especially when switching to Flory Color from another dye. The catalog does not contain dye: it is only a tool for choosing the color.

What else you need

• Flory Color ammonia-free dye
• Tuttocolors 6% 20 vol cream developer
• Tuttocolors dyeing brush
• Tuttocolors dye bowl

ProBeauty tip. The result on your hair also depends on the starting color. On already dyed hair, the shade in the catalog may turn out slightly different, so first do a test on a strand from the nape of your neck.

The BaByliss PRO SkeletonFX Graphite FX707B2ZE T-Blade is a 40 mm replacement T-blade with a 2.0 mm deep tooth, designed for BaByliss PRO outline trimmers. It is zero-gap adjustable and made for clean outlines, sharp lines, and fine details. The brand recommends it for thick or coarse hair.

What it does for you

• Clean outlines and precise lines with a 40 mm zero-gap adjustable T-blade.
• Easily cuts through thick hair: the 2.0 mm deep tooth is designed for thick and coarse hair.
• Heats up less: the brand says that graphite has very low friction and keeps the blade cooler.
• Lasts a long time because the Graphite coating is very durable.
• Fits multiple devices on any blade system with 2 screws.

How to use it at home

1. Turn off the outline trimmer.
2. Unscrew the screws with a screwdriver and remove the old blade.
3. Place the new blade and check that it is in the correct position, then tighten the screws.
4. Adjust the zero-gap only if you know how, with the moving blade slightly below the fixed one.
5. Clean and maintain the blade with the FX4in1 spray before and during use.

For what type of device

The brand lists it as compatible with the LO-PROFX FX726E trimmer, all FX7870 metal outline trimmers, and any device with a blade held by 2 screws. If you have sensitive skin, choose a blade with a standard tooth.

Specifications

What else you need

• SkeletonFX Gunsteel FX7870GSE Outline Trimmer
• SkeletonFX GoldFX FX7870GE Outline Trimmer
• BaByliss PRO FX4in1 Spray, Recommended by the Brand
• Wahl Blade Oil

ProBeauty Tip. Keep the old blade until you check that the new one cuts well. If it pulls the hair or pricks the skin, the zero-gap adjustment is incorrect and needs to be redone.

Sensus catalog in blonde toner 12colors

Spare parts - Printed circuit board for Wahl 5V trimmer

Sensus Alisa Professional Hair Straightener

Transform your hair instantly with Sensus by Alisa. The high-quality professional straightener ensures a perfect result without weighing down the hair. Specially designed titanium plates with ceramic heating elements ensure a constant temperature level for as long as it is used, while guaranteeing straight hair, free of frizz. The ceramic plates offer triple protection through negative ionization technology and infrared heat, while preserving the natural moisture and all other natural components of the hair. This way the hair remains healthy. The specially designed plates ensure ideal contact with the hair regardless of the application angle.

Emergent titanium ceramic plates.

Initial activation temperature 210C.

Continuous and automatic heat control. With a choice of 19 temperature levels: 150-230C

360-degree swivel cord for easier use.

Rated voltage: AC 110V-240V

Ergonomic design for ease of use

Sensus Giulietta Color Catalog 93 Colors

TITANIUM PRO,
TITANIUM CURLING IRON WITH CLAMP
The Titanium Pro curling iron is the perfect combination of strength and creativity. High-performance and multifunctional, it creates perfect hairstyles for the stage, backstage, or special occasions. Maximum comfort during use thanks to the elegant rubber finish that characterizes the line with a captivating design. Titanium Pro, the device for creating unique hairstyles.

TECHNICAL FEATURES:
- titanium barrel for even heat distribution
- MCH ceramic dual heater for constant temperature during styling
- advanced system with color digital display: blue indicates the curling iron is heating up; green indicates it has reached 180°C; red indicates the maximum temperature of 210°C
- non-slip and anti-scald soft-touch rubber finish

Jaguar - Charging stand for J-Cut 30 contour trimmer

Thuya Laser Mink eyelash extensions, D curl, 0.20 thickness, 12 mm length. From the Thuya professional range, for salon eyelash extension applications.

Specifications

• Model: Laser Mink
• Curl: D
• Thickness: 0.20
• Length: 12 mm
• Brand: Thuya

How to choose

The options differ in curl, thickness, and length. The greater the thickness, the thicker the lash.

Thuya Laser Mink eyelash extensions, D curl, 0.20 thickness, 10 mm length. From the Thuya professional range, for salon eyelash extension applications.

Specifications

• Model: Laser Mink
• Curl: D
• Thickness: 0.20
• Length: 10 mm
• Brand: Thuya

How to choose

The options differ in curl, thickness, and length. The greater the thickness, the thicker the lash.

Thuya Laser Mink eyelash extensions, D curl, 0.15 thickness, 8 mm length. From the professional Thuya range, for salon eyelash extension applications.

Specifications

• Model: Laser Mink
• Curl: D
• Thickness: 0.15
• Length: 8 mm
• Brand: Thuya

How to choose

The options differ in curl, thickness, and length. The greater the thickness, the thicker the lash.

Eyelash Extensions

Eyelash Extensions

Eyelash Extensions

Eyelash Extensions

Eyelash Extensions

Eyelash Extensions

Eyelash Extensions

Eyelash Extensions

Eyelash Extensions

Eyelash Extensions

Eyelash Extensions

Eyelash Extensions

Eyelash Extensions

Eyelash Extensions

Eyelash Extensions

Eyelash Extensions

Eyelash Extensions

Eyelash Extensions

Yellow - women's t-shirt M/L

Sibel Mixed Synthetic Training Head 30-40 cm 50% natural hair - 50% synthetic hair

Classic implantation ECO Density 170-200 hair/cm2

🔪 Panasonic Professional Blade Set PPWER97161361 – designed for precision performance and maximum durability.
Made from high-quality stainless steel, this blade set offers a clean and even cut, ideal for professional use in salons or at home.

💡 Key Features:

• 🔸 Compatible with Panasonic ER-DGP62, ER-FGP62, and ER-HGP62 models
• 🔸 High-precision sharpening for a fine and safe cut
• 🔸 Material: corrosion-resistant stainless steel
• 🔸 Easy to assemble and clean
• 🔸 Consistent performance even after prolonged use

⚙️ Ideal for:
Professional barbers and users who want perfect results with every haircut.

📦 Package contents:
1 x Panasonic Professional Blade Set PPWER97161361

Olivia Garden Multibrush brush head 56mm
Ceramic coated barrel

Heats up faster & retains heat longer
Faster, gentler & better styling

Brush head with vents for easy air circulation

Simple design
Improves ventilation for faster drying

Nook hair dyeing brush.

Nook - black cape

Large Nook Origin Color Catalog 89 shades

Nook Origin Color small catalog 89 shades

Titania 1050/1N is a stainless steel manicure scissor, approximately 9 cm long. It has slightly curved blades with a fine tip to follow the shape of the nail. Titania makes it in the range of nail and cuticle scissors.

What it does for you

• Cut along the shape of the nail: the curved blades follow its roundness.
• Good control: at 9 cm it is small and you hold it securely between your fingers.
• Does not rust easily: it is made of stainless steel, it says so on the blade.
• Reach the corners: the fine tip gets into the small places on the edge of the nail.

How to use it at home

1. Cut clean and dry nails, not immediately after a bath, when they are soft.
2. Hold the scissors with the curve towards the nail.
3. Cut in small steps, from one edge to the other.
4. Then file the edge, so it does not snag.
5. Wipe the blades after use and keep it dry.

For what type of nails

It is suitable for natural hand nails, thin or medium. For thick toenails it is too small. Do not use it on gel or false nails, you shorten those with a file.

Specifications

What else you need

• OPI Start to Finish Base and Treatment
• OPI Hand and Foot Cream
• OPI ProSpa 80/120 Nail File
• OPI Lady in Black Nail Polish

ProBeauty Tip. Keep it only for nails, in a pouch or in a kit. A small scissor used for other things quickly loses its sharpness and starts to break the nail instead of cutting it.

BaByliss PRO BABZ020000010 is the replacement motor for the BaByliss PRO Caruso hair dryer. It is a service part, not an accessory: it is installed inside the dryer by an authorized service center. You buy it if the technician has told you that your Caruso dryer's motor needs to be replaced.

What it does for you

• It can bring your dryer back to life, if the fault is with the motor and the rest of the appliance is in good condition.
• Repair instead of throwing away: a good salon dryer is often worth repairing.
• You have the part with the brand code, BABZ020000010, which the service center can easily verify.
• You shorten the repair time, if the service center does not have the part in stock.

How to use it at home

1. You do not install it at home. The motor is connected to the dryer's electrical system, and incorrect installation can be dangerous.
2. Unplug the dryer and do not use it again until it is repaired.
3. Note down the exact model and code on the handle or the dryer's label.
4. Check with the service center that BABZ020000010 is the right part for your model.
5. Take the dryer and the motor to an authorized BaByliss PRO service center or to a qualified technician.
6. After repair, clean the filter at the back before the first use.

For what type of appliance

The motor is listed for the BaByliss PRO Caruso dryer. BaByliss PRO has had several dryers with this name, for example Caruso (BAB6510IE) and Caruso HQ (BAB6970IE), and the brand does not publish a compatibility sheet for this code. Do not order it until you confirm the model with the service center or with us.

What else you need

• BaByliss PRO BABD11E Diffuser, compatible with Caruso dryers
• Olivia Garden Ceramic+Ion SpeedXL 45 Round Brush
• Wella EIMI Thermal Image Heat Protection Spray

ProBeauty Tip. Before replacing the motor, ask the service center to also check the cable at the handle's exit. In dryers used daily, faults often occur there.

BaByliss PRO 35000591 is a replacement blade set sold for the FlashFX FX59ZE and EtchFX FX69ZE contour trimmers. According to the brand's specifications, these trimmers feature a zero-adjustable stainless steel T-blade, ideal for contours, sideburns, and the neck. The set snaps directly onto the head without screws.

What it does for you

• Restores clean contours when the old blade no longer cuts cleanly on the first pass.
• Changes in seconds: the blade set snaps off and attaches with your thumb, no screwdriver required.
• Keeps your trimmer working: you only replace the worn blades, not the entire trimmer.
• Can be adjusted to zero using the adjustment tool provided with the trimmer, if you want very close trims.

How to use it at home

1. Set the switch to "0-OFF" and unplug the trimmer.
2. Place your thumb under the small blade and push forward to detach the blade set from the housing.
3. Place the new set on the trimmer head.
4. Press the large blade with your thumb until it clicks into place.
5. Apply a few drops of oil to the blades, without overdoing it, and turn on the trimmer.

For which type of trimmer

It is sold for the BaByliss PRO FlashFX FX59ZE cordless and EtchFX FX69ZE corded contour trimmers. It is not for the SkeletonFX FX7870 or LO-PROFX series, which attach with screws. If you have a different trimmer, write us the code before ordering.

What else you need

• BaByliss PRO 4-in-1 Blade Care Spray
• Wahl Blade Oil for lubricating the blades, 100 ml
• Wahl Blade Ice Spray for cooling and cleaning the blades

ProBeauty Tip. If you want to adjust the blades to zero, use only the adjustment tool provided with the FX59ZE or FX69ZE. Adjusting by eye can cause the moving blade to protrude beyond the fixed blade.

The Jaguar T-Series T300 is a 20 mm round brush for blow-drying, with an aluminum body and an ionizing surface. The heat from the hairdryer passes through the cylinder, so you dry faster and style at the same time. It is the smallest in the series, made for short hair and detailed work.

What it does for you

• Dries faster: the aluminum body conducts the heat from the hairdryer and shortens drying time.
• Less frizzy hair, because the ionizing surface has an antistatic effect. The hair comes out smooth and shiny.
• Hair does not get tangled in the brush: the cylinder is smooth, without joints, and the bristles are rounded.
• Gentle on the scalp: the nylon bristles have rounded tips and are heat-resistant.
• You work neatly, with the parting pin in the handle and the non-slip handle.
• Volume on short hair: the small diameter grips the hair well even on very short haircuts.

How to use it at home

1. On washed hair, spray a heat protection spray and blow-dry it until it is only damp.
2. Take the parting pin out of the end of the handle and divide the hair into sections. Secure them with clips.
3. Work on narrow sections. Place the brush under the section, at the roots, and lift it slightly for volume, with the air directed at the brush.
4. On very short haircuts, pull the brush to the ends and turn them slightly inward.
5. After use, remove the remaining strands between the bristles and let it cool.

For what type of hair and haircuts

Jaguar describes it as an extra-small brush, ideally suited for short haircuts where you want volume in a short time. It also works for bangs, the nape of the neck, and the roots at the crown. It is not for long hair: the sections do not fit on the cylinder and you will struggle to finish. For medium lengths, choose 33 mm.

Specifications

What else you need

• Jaguar T-Series 25 mm round brush
• GA.MA Classic hairdryer
• Wella EIMI Thermal Image heat protection spray
• ETB Hair hair clips
• Olivia Garden brush cleaning tool

ProBeauty tip. For short bangs, pull the brush down, close to the forehead, with the air from above. For volume at the crown, lift the section straight up and hold the brush in place for a few seconds, then hit it with cool air.

BaByliss PRO FX821E FX500ME is a replacement blade sold for the BaByliss PRO FX821E mini clipper. The FX821E is a mini hair clipper and trimmer with two detachable blades, one fine and one coarser. You use it for sideburns, neck, beard, and mustache.

What it does for you

• It brings back clean finishes on your sideburns, neck, beard, and mustache.
• It keeps your clipper working: you only replace the worn blade, not the entire clipper.
• It can be replaced without service, because the blades of the FX821E clipper are detachable.
• It cuts again without pulling, when the old blade has become dull.

How to use it at home

1. Turn off the clipper and unplug it.
2. Remove the old blade, as shown in the clipper manual.
3. Place the new blade in the same position and press until it is firmly attached.
4. Put a drop of oil on the teeth and turn on the clipper for a few seconds.
5. Test the cut on a small area before finishing.

For what type of clipper

It is sold for the BaByliss PRO FX821E mini hair clipper and trimmer, an older model. The brand does not publish a sheet for the FX500ME code or any other compatible models. If you have another clipper, write us its code before ordering, so you do not receive a blade that does not fit.

What else you need

• BaByliss PRO 4-in-1 spray for blade maintenance
• Wahl oil for lubricating the blades, 100 ml
• Wahl Blade Ice spray for cooling and cleaning the blades

ProBeauty's tip. When ordering, take the old blade with you or a photo of it next to the clipper. This way you can immediately see if you need the fine blade or the coarser one of the FX821E clipper.

BaByliss PRO 3 mm Guard for FX660SE is the 3 mm replacement guard for the FX660SE hair clipper. It is the shortest of the 5 guards the brand offers for this clipper: 3, 6, 9, 12, and 16 mm. Get it if you have lost or broken the original one.

What it does for you

• Cut evenly at 3 mm again without buying another complete set.
• Complete the original set of the FX660SE clipper with the missing guard.
• Create clean short transitions on the sides and at the nape of the neck.
• Easily switch to the blade adjustment for lengths under 3 mm, which the FX660SE has from the factory.

How to use it at home

1. Turn off the clipper and clear the hair from the blade.
2. Place the guard over the blade and press until it locks into place.
3. Check that it is securely attached before turning on the clipper.
4. Cut with even strokes, without pressing the guard into the scalp.
5. After cutting, remove it, brush off the hair, and store it with the other guards.

For which type of device

It is the 3 mm guard for the BaByliss PRO FX660SE hair clipper. It is not a set: you receive a single guard. For the FX8700, FX825, or FX895E clippers, choose the FXPCGE set, made for them.

Specifications

What else you need

• BaByliss PRO FX4in1 Spray for blade maintenance
• Wahl Oil for hair clipper blades
• Straight cutting comb
• Wahl cutting cape

ProBeauty Tip. For a smooth transition under 3 mm, remove the guard and use the FX660SE blade adjustment, which ranges from 3.2 to 0.8 mm. This way, you blend the 3 mm guard with the short-cut area.

BaByliss PRO 35087000 is the 45 mm replacement blade for the ChromFX FX8700E hair clipper. The brand lists it as the replacement blade on the clipper's page. It is a Japanese steel blade with a very sharp V-shaped cutting angle, designed for fading.

What it does for you

• Restores the cut to like-new condition, as it is the brand's recommended replacement blade for the FX8700E.
• Cuts cleanly and precisely, thanks to the Japanese steel with a V-shaped cutting angle.
• Gets very close to the skin: it is a flat blade, ideal for blending harsh lines.
• Covers a wide area, with a width of 45 mm.

How to use it at home

1. Turn off the clipper and set the fine adjustment lever on the left to the top position.
2. Loosen the screws with a screwdriver and set them aside.
3. Lift the old moving blade slightly and replace it with the new one on the oscillator.
4. Place the new fixed blade, with the moving blade centered and parallel to it, to avoid injury.
5. Tighten the screws back into place.
6. Clean and lubricate the blade regularly with BaByliss PRO 4 in 1 spray or oil.

For which type of device

It is the replacement blade for the BaByliss PRO ChromFX FX8700E hair clipper, as stated on the clipper's page. The brand does not list this code for other FX8700 variants. If you have the FX8700 Gold, Boost+, or LO-PROFX FX825, choose a blade with compatibility published for the entire series.

Specifications

What else you need

• BaByliss PRO ChromFX FX8700E hair clipper
• BaByliss PRO 4 in 1 spray for blade maintenance
• Wahl oil for lubricating blades, 100 ml
• Wahl Blade Ice spray for cooling and cleaning blades

ProBeauty tip. Check the label under the clipper to make sure it says FX8700E, not just FX8700. For the other variants, blades compatible with the entire series are the safe choice.

Wahl Beretto Motor 95368-1016 is the complete replacement motor that the official Wahl parts list specifies for the Beretto ProLithium (4212-0470) clipper. Replace it when the old motor no longer starts or has lost power. The clipper is repairable, not disposable.

What it does for you

• Your clipper is back in action: a new motor, while the housing, battery, and blade remain.
• Complete motor: the Wahl list refers to it as "Motor completo Beretto," meaning the entire motor assembly, not just one of its components.
• The exact model code: 95368-1016 is listed for the Beretto ProLithium, alongside its other parts.
• Simpler servicing: the technician receives the part directly from the Wahl list.

How to use it at home

1. Fully charge the clipper, clean and lubricate the blade: sometimes this solves a slow clipper.
2. If that doesn't help, check the label to make sure you have the Beretto 4212-0470.
3. Take the clipper and motor to an authorized Wahl service center for installation.
4. After repair, test the clipper for a few minutes with a lubricated blade before cutting hair.

For what type of device

For the Wahl Beretto ProLithium (4212-0470) cordless clipper, as specified in the Wahl parts list. We have no confirmation for the Beretto Stealth, as it has a different model code. It is not for the Beret, which has a different motor.

What else you need

• Wahl 97581-2016 Charger for Beret and Beretto
• Wahl Blade Oil
• Wahl Blade Ice Spray for Blades

ProBeauty Tip. Keep the old motor until the repair is finished. If the service center finds another cause, you can return the unopened new part.

Wahl Guard No. 8 Black 25 mm is the standard Wahl 25 mm guard, sold separately. Wahl says that No. 8 leaves approximately 25 mm of hair: you shorten long hair without losing much length. You get it to replace a lost or broken one, or to have a second one on hand.

What it does for you

• Cuts evenly at 25 mm over the entire area you pass the clipper over.
• You use it to shorten long hair without losing much length.
• You complete the set without having to buy all 8 guards again.
• Works on several Wahl clippers: the brand lists it as compatible with 8 models, from Super Taper to Balding.

How to use it at home

1. Turn off the clipper and brush the hair off the blade.
2. Snap the guard onto the blade and press until it clicks. Check that it is secure before turning it on.
3. Cut against the direction of hair growth, using even strokes.
4. Pass over the same area several times to catch the lying hairs.
5. After cutting, clean it with a small brush. From time to time, wash it with warm water and mild soap and let it dry completely.

For what type of clipper

Wahl lists it as compatible with Super Taper, Super Taper Cordless, Legend, Legend Cordless, Senior Cordless, Magic Clip, Magic Clip Cordless, and Balding. You receive a single guard, not a set. It is not for outline clippers or for clippers with slide-on guards, such as Kuno or ChromStyle.

Specifications

What else you need

• Wahl Guard No. 7, shorter
• Complete Wahl Premium Guard Set
• Wahl Magic Clip Cordless Clipper
• Wahl Clipper Blade Oil

ProBeauty Tip. No. 8 is useful for taking off only the ends. Cut a little with it first, check the length in the mirror, then decide whether to go down to No. 7 (22 mm).