News - equipment

The BaByliss PRO FoilFX02 GoldFX FXRF2GE is the replacement set for the FoilFX02 GoldFX double foil shaver: a double foil shaving head and 2 single blades. Install it when you want the shaver to once again shave very close to the skin, on the neck, face, and hairline. It is a replacement part, not a shaver, so you need the FoilFX02 to use it.

What it does for you

• Replace everything at once: the foil head and both blades, exactly as the FoilFX02 manual requires.
• Shave very close to the skin on the neck, face, and around the entire hairline.
• The same 44 mm shaving area, so you work just as quickly as before.
• Snap-on installation: the blades and head each click into place.
• You can change the color of the head: the brand says that the chameleon, gold, chrome, and gunsteel finishes can be combined to your liking.

How to use it at home

1. Turn off the shaver. Press the release button on the side and pull the shaving head up and off the body of the shaver.
2. Remove the old blades one by one: grasp each blade by its two heads and pull it gently upwards.
3. Insert the new blades, one at a time. Align the blade guide with the guide rail and press gently until you hear a click.
4. Place the new head over the blades and press gently until it clicks into place. Be careful not to bend the foil or blades.
5. Turn on the shaver and check that it works correctly before the first shave.

For what type of shaver

The set is made for the FoilFX02 GoldFX shaver. The BaByliss PRO page says it can be used on any BaByliss PRO double foil shaver, so it also works on the FoilFX02 metal, GunsteelFX, or ChameleonFX. For single foil shavers, for the UVFOIL02, FXONE, and FX3, the brand has separate sets.

Specifications

What else you need

• BaByliss PRO FoilFX02 Gold shaver, for which the set is made
• BaByliss PRO FoilFX02 metal shaver, with double foil
• BaByliss PRO 4-in-1 spray for shaver maintenance
• Wahl oil for lubricating the blades
• Wahl Blade Ice spray for cleaning the blades

ProBeauty tip. Clean the blades with the brush after every shave and lubricate them regularly with a few drops of oil. The FoilFX02 manual clearly states that without cleaning and lubrication, the shaver will not work correctly.

The Onyx hair clipper features patented Reset IQ Charge technology: a new charging method that extends battery life. This design will charge to 100%, even after prolonged use. Charging time: 3 hours for regular charging, 5 hours for restored IQ charging.
Patented Smart-Clip Technology: The clipper senses blade resistance and increases motor speed, so the clipper will never drag or stall during use. It guarantees a smooth, even cut every time. Constant Power: Dual speed for cutting versatility, 6,000 and 7,500 rpm, and maintains speed during use.
Equipped with Onyx Fade precision blade - Helps achieve a fresh look with max. length of 3.5 mm. Quiet motor: Creates a peaceful working environment.
Maximum 5-hour battery life: A 3-hour charge provides 5 hours of battery life.
Advanced lever locking function: 5 constant lock adjustments with infinite variable control, which it maintains for long-term use.
Patented Cool Blade Technology: Special material keeps the blade cool to the touch, making it cooler than most clippers in a 30-minute test. The blade is also interchangeable with most professional clipper brands.
LED Display: The LED display indicates the remaining battery life at the current speed setting.
Accessories: 1 screwdriver, 1 brush, 1 lubricating oil, 1 blade guard, 10 combs (1/2#, 1#, 1-1/2#, 2#, 3#, 4#, 5#, 6#, 7#, 8#), 1 US plug.
Reset IQ charging station included.

The BaByliss PRO SkeletonFX FX707C2ZE is a 40 mm titanium-coated T-blade with 2 mm deep teeth. The brand presents it as the ChameleonFX version of the Titanium 2.0 blade. You use it on the SkeletonFX FX7870, SnapFX FX797E, and LO-PROFX FX726 trimmers.

What it does for you

• Stays sharp longer: titanium is a hard and durable coating, says the brand.
• Creates clean contours and smooth lines, thanks to the 2 mm deep teeth.
• Cuts well through thick or coarse hair, where you work on details and edges.
• Adjusts to zero-gap, for trimming very close to the skin.
• Fits multiple devices: FX797E, all FX7870 and FX726 models, plus 2-hole blade systems.

How to use it at home

1. Turn off the trimmer.
2. Remove the old blade with a screwdriver.
3. Place the new blade on the device and check that it is in the correct position, parallel to the housing.
4. Tighten the screws and turn on the device for a few seconds to make sure it runs smoothly.
5. Clean and lubricate the blade regularly, before and during use, with the BaByliss PRO 4 in 1 spray.

For what type of device

It fits the SkeletonFX FX7870 trimmers, including Boost+ Chameleon, SnapFX FX797E, and LO-PROFX FX726, plus other devices with a 2-hole blade system. The brand recommends it for thick or coarse hair and less sensitive skin. It is not for 45 mm blade clippers.

Specifications

What else you need

• BaByliss PRO Boost+ Chameleon SkeletonFX FX7870IBPE Trimmer
• BaByliss PRO SkeletonFX Gold FX7870GE Trimmer
• BaByliss PRO 4 in 1 Blade Care Spray
• Wahl Oil for blade lubrication, 100 ml

ProBeauty tip. If you have a SkeletonFX Boost+ Chameleon, keep the FX707C2ZE as a spare blade: it has the same deep-tooth shape as the blade you already use.

The BaByliss PRO Boost+ GoldFX FX8700GBPBASE Charging Base is the charging stand for the Boost+ Gold clipper. It holds the clipper in a stable, upright position on the countertop and charges it using the adapter you already have for the clipper. The adapter is not included in the box.

What it does for you

• The clipper stands straight and secure on the countertop: the base is solid and balanced.
• Charge it without looking for the cable: place it on the base and charging begins.
• Use the clipper's adapter, without a separate power supply.
• Compatible with the entire FX8700 series with a hanging hook, not just the Gold model.
• Keep the clipper charged and visible on your workstation.

How to use it at home

1. Place the base on a flat, stable surface near an outlet.
2. Connect the clipper adapter to the base, then plug the adapter into the outlet.
3. Place the clipper in the base in an upright position and check that it is stable.
4. Place it back on the base after each client to keep it charged.
5. When moving the base, first unplug the adapter.

For what type of device

BaByliss PRO states that the base is designed for the Boost+ professional clipper and is compatible with the entire FX8700 series with a hanging hook. For Boost+ FX7870 series outline clippers, there is a separate FX7870GBPBASE base. Without the clipper adapter, the base does not charge.

Specifications

What else you need

• BaByliss PRO Boost+ Gold clipper, which the base is designed for
• BaByliss PRO FXPCGE set of 8 guards for FX8700
• BaByliss PRO charging base for the Boost+ Gold SkeletonFX outline clipper
• BaByliss PRO FX4in1 spray for blade maintenance

ProBeauty tip. Place the base on the side of your working hand, away from the edge of the countertop. This way, you can reflexively put it back between clients without snagging the adapter cable.

The BaByliss PRO Boost+ GoldFX Charging Base FX8700GBPBASE is the charging stand for the Boost+ Gold clipper. It holds the clipper in a vertical position on the countertop and charges it through the clipper adapter, which is not included.

Resealed product. It has been unsealed for inspection or display and may have minor signs of wear or handling. It is complete and functional, tested by us, and has the same warranty as a new product. It comes without the original box.

What it does for you

• The clipper stands upright and securely on the countertop because the base is solid and balanced.
• Charge it without looking for the cable: place the clipper on the base and charging begins.
• Use the clipper adapter; you do not need a separate power supply.
• Compatible with the entire FX8700 series with a hanging hook, not just the Gold model.
• Keep the clipper always in sight and charged at your workstation.

How to use it at home

1. Place the base on a flat, stable surface near an electrical outlet.
2. Connect the clipper adapter to the base, then plug the adapter into the outlet.
3. Place the clipper in the base in a vertical position and check that it is stable.
4. Leave it on the base between clients and at the end of the day so that it is charged for the next time.
5. When moving the base, first unplug the adapter.

For what type of device

BaByliss PRO states that the base is designed for the Boost+ professional clipper and is compatible with the entire FX8700 series with a hanging hook. For Boost+ outline clippers in the FX7870 series, the brand offers a separate FX7870GBPBASE base. Without the clipper adapter, the base does not charge.

Specifications

What else you need

• BaByliss PRO Boost+ Gold clipper, which the base is designed for
• BaByliss PRO FXPCGE set of 8 guide combs for the FX8700
• BaByliss PRO FX4in1 spray for blade maintenance
• Wahl oil for clipper blades

ProBeauty tip. Upon delivery, check that your FX8700 clipper has a hanging hook: this determines whether it will fit in the base. Then place the base away from the edge of the countertop so you do not snag the cable.