Knives and sharpeners

Professional precision for perfect transitions, clean fades, and natural blends

The Wahl Professional Blending Blade Set is the essential accessory for professional barbers and hairstylists aiming for impeccable haircuts, seamless transitions, and ultra-clean results, including advanced clipper-over-comb techniques. Designed for maximum performance, this blade set offers total control and speed, even in the most demanding services.

Thanks to the special offset tooth geometry and flat cutting angle, the blades allow for natural fading without harsh lines, making them ideal for blending, texturizing, and close-to-skin finishes.

Key benefits for professionals:

• Natural transitions and perfect fades – ideal for blending and soft transitions
• Flat cutting angle – very close-to-skin, clean, and precise results
• Next-generation offset teeth – faster work and smoother blending
• Adjustable cutting length between 0.5 and 2 mm – maximum adaptability
• Cutting width 46 mm – efficient coverage and increased control
• Quick tool-free change – easy maintenance and optimal hygiene

Professional compatibility:

Wahl Kuno
Wahl ChromStyle
Wahl Genio
Wahl Beretto

Designed for salon and barbershop performance

This blade set is the ideal choice for:
• fade and taper haircuts
• natural blending without harsh lines
• clipper-over-comb technique
• precise finishes on short and medium hair

Why choose Wahl Professional Blending Blade Set:

Premium Wahl quality, recognized worldwide
Total control and professional precision
Increased efficiency during haircuts
Ideal upgrade for your compatible Wahl clippers

Wahl Professional Blending Blade Set – the tool that makes the difference between a good haircut and a perfect one.

The professional GA.MA PRO 8 blade set is the ideal choice for barbers and hairstylists who want consistent performance and precision in every movement. Constructed from high-quality stainless steel, this set consists of two overlapping blades, specially designed for the GA.MA PRO 8 clipper, offering a smooth, even cut and total control over details.

The blades are sharpened with millimeter precision, reducing the risk of irritation and ensuring a long lifespan even under intensive use. Thanks to its ergonomic design, this set maintains the optimal performance of the clipper, guaranteeing a professional experience with every use.

💈 Main advantages:
• Material: premium stainless steel – resistant to wear and corrosion
• Perfect compatibility with the GA.MA PRO 8 clipper
• Precise and fine cutting, without pulling hair
• Extended durability and minimal maintenance
• The set does not include screws – ready for quick assembly

🔧 Recommended for: barbershops, professional salons, and users looking for top performance in hair care.

Transform your trimming experience with the Wahl Slide-On attachment comb set, the ideal choice for professional barbers and home users who want perfectly controlled and uniform haircuts. These attachment combs are compatible with a selection of Wahl clippers and offer total flexibility for all types of lengths and styles.

What does the set contain?
6 combs of different sizes:
3 mm
6 mm
9 mm
12 mm
18 mm
25 mm

Guaranteed compatibility with professional Wahl models:
1887-0470 – KUNO
1876-0488 – GENIO
1871-0473 – CHROMSTYLE

The indicated lengths correspond to the cutting length when the cutting head is completely closed, ensuring maximum precision with every use.

Essential advantages:
Easy to mount – slide-on system for quick change
Strength and durability – built for intense professional use
Uniform and efficient cutting – ideal for transitions, fades, and personalized haircuts
Easy organization – each comb is clearly marked for quick identification

Recommended for:
Demanding barbers and hairstylists
Home users who use Wahl devices
Professionals looking for quality, precision, and comfort

Package contents: 6 x Slide-On attachment combs
Brand: Wahl
Product type: Attachment combs for hair clippers

Choose Wahl Slide-On Attachment Comb Set for haircuts with millimeter precision, increased efficiency, and adaptability to any style or need! Perfect style starts with the right accessories!

Discover ultimate performance in ultra-short haircuts with Wahl U-Blade Profi Cutting Set 0.3 mm, the professional cutting head specifically designed for precise contours, sharp lines, and impeccable details. With a cutting length of only 0.3 mm, this blade is the perfect ally for clean fades, exact detailing, and salon-level finishes.

Why choose Wahl U-Blade?
Extra fine cut of 0.3 mm – ideal for contours, edges, and precision styling
Cutting comb width: 32 mm – efficient and fast coverage
Durable and ultra-sharp blades – for smooth and uniform results
Professional design – superlative German performance

Extended compatibility for maximum flexibility:
Fits perfectly with Wahl T-Cut Li+, Chromini Pro 2, Pro 2 Mini and Neoliner models – giving you the freedom to quickly and easily change the cutting head between devices, without compromising performance.

Technical specifications:
Cutting length: 0.3 mm
Blade width: 32 mm
Compatibility: T-Cut Li+, Pro 2 Mini, Chromini Pro 2, Neoliner
Brand: Wahl
Product code: 1584-7320

Choose Wahl U-Blade 0.3 mm for perfect control, an impeccable finish, and a professional cutting experience right in your salon or at home. Let your creativity define the style with every line drawn!

Complete your clipper kit with the professional 12.0 mm guide comb, perfectly compatible with Wahl Kuno, Chromstyle, and Genio models. Ideal for barbers and hairstylists who want uniformity, precision, and enhanced control during haircuts.

---

Key Features

• Cutting length: 12.0 mm – ideal for uniform haircuts, medium layers, and natural finishes

• Compatibility: perfectly fits Wahl Kuno, Chromstyle, and Genio clippers

• Color: Black – professional design, easy to identify in the guide comb set

• Secure attachment – easily attaches and remains stable during use

---

Benefits

• Allows for controlled cutting, ideal for uniform layers

• Protects the scalp and provides enhanced comfort for the client

• Easy to clean and maintain

---

Choose the 12 mm guide comb for better cutting length control and professional results every time! Perfect compatibility with top Wahl models for uncompromising haircuts.

The carving blade is made in Germany from the highest quality stainless steel. It offers a cutting length of 0.4 mm, with the blade width being 6.5 mm. The set features a quick-release stainless steel blade set and powerful cutting due to the precise grinding technology used. The 0.4 mm Wahl/Moser carving blade is lightweight, providing precise lines, contours, and designs for bold hairstyles and smooth, precise details for beard trimming. The blade set is compatible with Moser ChroMini and ChroMini Pro trimmers. The package contains: 1 blade + screws

The Panasonic Professional WER9714 is the original replacement blade for Panasonic ER1421 and ER1420 trimmers. The ER1421 is Panasonic's barber trimmer for beard styling, with a 45° cutting angle. When the blade gets dull, you replace it and work like it's the first day again.

What it does for you

• Sharp contours again: new teeth cut the hair cleanly, without leaving stray hairs along the beard line.
• Original part: WER9714 is the code given by Panasonic for the ER1421 and ER1420.
• Works on older models too: the packaging says it is also used with the ER149 and ER147.
• Keep your trimmer: you only replace the part that wears out, not the whole device.

How to use it at home

1. Turn off the trimmer and remove it from the charger.
2. Remove the old blade as shown in your trimmer's manual.
3. Shake out and brush away the hair collected under the blade.
4. Snap the new blade into place until it is secure.
5. Lubricate the teeth with a drop of oil and let the trimmer run for a few seconds.

For what type of machine

The official Panasonic page lists it for the ER1421 and ER1420. The original packaging also lists the ER149 and ER147. For the ER-RZ10, ER-DGP62, or ER-GP22, Panasonic has other blades with different codes.

Specifications

Part code	WER9714
Compatibility	Panasonic ER1421, ER1420; also ER149, ER147 on the packaging
Type	replacement trimmer blade

What else you need

• Oil for clipper blades
• Spray that cools and cleans the blades
• 4-in-1 spray for clipper maintenance

ProBeauty tip. When contouring, a worn blade is first felt on the short hairs on the neck, which remain uncut. When you notice this, don't press harder on the skin, it's a sign that it's time for the WER9714.

Babyliss Pro FX3 DLC Titanium Trimmer Blade
For over 50 years, BaBylissPRO has been producing innovative professional tools to inspire the creativity of professional barbers everywhere. BaBylissPRO tools encourage evolving hairstyling and styling trends among professionals through the quality and performance of their products.
BabylissPro is one of the largest manufacturers of professional products that can be used both in beauty salons and at home. BabylissPro is a leading manufacturer of high-quality hair care devices.
This blade is made of DLC Titanium material with an elongated flat cutting surface that supports a perfect vertical cutting motion, with zero-gap adjustability.
Compatibility: Compatible with the FX3 Trimmer.
Features:
• features an elongated flat cutting surface that supports a vertical cutting motion
• clean and precise cut
• ultra-low friction
• no overheating
• made of a hard and extremely durable material
How to replace the blade:
• first, turn off the clipper and place the fine adjustment lever (left) in the up setting
• loosen the screws using a small screwdriver and remove them, gently lift the movable blade and replace it with the new movable blade on the oscillator
• replace the fixed blade, ensuring that the movable blade is centered and set parallel to the fixed blade to avoid possible injury
• tighten the screws and check the cut, then always use maintenance oil
Maintenance:
Regular cleaning: After each use, clean the blade with a soft brush to remove hair and product residue.
Blade oil: Periodically apply special blade oil to maintain optimal blade function and prevent corrosion.
Avoid excessive moisture: Store the blade in a dry place and avoid prolonged contact with moisture to prevent corrosion.
Periodic inspection and adjustment: Check and, if necessary, adjust the blade periodically to maintain precise and efficient cutting.

The BaByliss PRO SkeletonFX Graphite FX707B2ZE T-Blade is a 40 mm replacement T-blade with a 2.0 mm deep tooth, designed for BaByliss PRO outline trimmers. It is zero-gap adjustable and made for clean outlines, sharp lines, and fine details. The brand recommends it for thick or coarse hair.

What it does for you

• Clean outlines and precise lines with a 40 mm zero-gap adjustable T-blade.
• Easily cuts through thick hair: the 2.0 mm deep tooth is designed for thick and coarse hair.
• Heats up less: the brand says that graphite has very low friction and keeps the blade cooler.
• Lasts a long time because the Graphite coating is very durable.
• Fits multiple devices on any blade system with 2 screws.

How to use it at home

1. Turn off the outline trimmer.
2. Unscrew the screws with a screwdriver and remove the old blade.
3. Place the new blade and check that it is in the correct position, then tighten the screws.
4. Adjust the zero-gap only if you know how, with the moving blade slightly below the fixed one.
5. Clean and maintain the blade with the FX4in1 spray before and during use.

For what type of device

The brand lists it as compatible with the LO-PROFX FX726E trimmer, all FX7870 metal outline trimmers, and any device with a blade held by 2 screws. If you have sensitive skin, choose a blade with a standard tooth.

Specifications

Type	Graphite T-blade, 2.0 mm deep tooth
Width	40 mm
Adjustment	zero-gap
Compatibility	LO-PROFX FX726E, FX7870 metal outline trimmers, 2-hole blade systems

What else you need

• SkeletonFX Gunsteel FX7870GSE Outline Trimmer
• SkeletonFX GoldFX FX7870GE Outline Trimmer
• BaByliss PRO FX4in1 Spray, Recommended by the Brand
• Wahl Blade Oil

ProBeauty Tip. Keep the old blade until you check that the new one cuts well. If it pulls the hair or pricks the skin, the zero-gap adjustment is incorrect and needs to be redone.

🔪 Panasonic Professional Blade Set PPWER97161361 – designed for precision performance and maximum durability.
Made from high-quality stainless steel, this blade set offers a clean and even cut, ideal for professional use in salons or at home.

💡 Key Features:

• 🔸 Compatible with Panasonic ER-DGP62, ER-FGP62, and ER-HGP62 models
• 🔸 High-precision sharpening for a fine and safe cut
• 🔸 Material: corrosion-resistant stainless steel
• 🔸 Easy to assemble and clean
• 🔸 Consistent performance even after prolonged use

⚙️ Ideal for:
Professional barbers and users who want perfect results with every haircut.

📦 Package contents:
1 x Panasonic Professional Blade Set PPWER97161361

BaByliss PRO 35000591 is a replacement blade set sold for the FlashFX FX59ZE and EtchFX FX69ZE contour trimmers. According to the brand's specifications, these trimmers feature a zero-adjustable stainless steel T-blade, ideal for contours, sideburns, and the neck. The set snaps directly onto the head without screws.

What it does for you

• Restores clean contours when the old blade no longer cuts cleanly on the first pass.
• Changes in seconds: the blade set snaps off and attaches with your thumb, no screwdriver required.
• Keeps your trimmer working: you only replace the worn blades, not the entire trimmer.
• Can be adjusted to zero using the adjustment tool provided with the trimmer, if you want very close trims.

How to use it at home

1. Set the switch to "0-OFF" and unplug the trimmer.
2. Place your thumb under the small blade and push forward to detach the blade set from the housing.
3. Place the new set on the trimmer head.
4. Press the large blade with your thumb until it clicks into place.
5. Apply a few drops of oil to the blades, without overdoing it, and turn on the trimmer.

For which type of trimmer

It is sold for the BaByliss PRO FlashFX FX59ZE cordless and EtchFX FX69ZE corded contour trimmers. It is not for the SkeletonFX FX7870 or LO-PROFX series, which attach with screws. If you have a different trimmer, write us the code before ordering.

What else you need

• BaByliss PRO 4-in-1 Blade Care Spray
• Wahl Blade Oil for lubricating the blades, 100 ml
• Wahl Blade Ice Spray for cooling and cleaning the blades

ProBeauty Tip. If you want to adjust the blades to zero, use only the adjustment tool provided with the FX59ZE or FX69ZE. Adjusting by eye can cause the moving blade to protrude beyond the fixed blade.

BaByliss PRO FX821E FX500ME is a replacement blade sold for the BaByliss PRO FX821E mini clipper. The FX821E is a mini hair clipper and trimmer with two detachable blades, one fine and one coarser. You use it for sideburns, neck, beard, and mustache.

What it does for you

• It brings back clean finishes on your sideburns, neck, beard, and mustache.
• It keeps your clipper working: you only replace the worn blade, not the entire clipper.
• It can be replaced without service, because the blades of the FX821E clipper are detachable.
• It cuts again without pulling, when the old blade has become dull.

How to use it at home

1. Turn off the clipper and unplug it.
2. Remove the old blade, as shown in the clipper manual.
3. Place the new blade in the same position and press until it is firmly attached.
4. Put a drop of oil on the teeth and turn on the clipper for a few seconds.
5. Test the cut on a small area before finishing.

For what type of clipper

It is sold for the BaByliss PRO FX821E mini hair clipper and trimmer, an older model. The brand does not publish a sheet for the FX500ME code or any other compatible models. If you have another clipper, write us its code before ordering, so you do not receive a blade that does not fit.

What else you need

• BaByliss PRO 4-in-1 spray for blade maintenance
• Wahl oil for lubricating the blades, 100 ml
• Wahl Blade Ice spray for cooling and cleaning the blades

ProBeauty's tip. When ordering, take the old blade with you or a photo of it next to the clipper. This way you can immediately see if you need the fine blade or the coarser one of the FX821E clipper.

BaByliss PRO 3 mm Guard for FX660SE is the 3 mm replacement guard for the FX660SE hair clipper. It is the shortest of the 5 guards the brand offers for this clipper: 3, 6, 9, 12, and 16 mm. Get it if you have lost or broken the original one.

What it does for you

• Cut evenly at 3 mm again without buying another complete set.
• Complete the original set of the FX660SE clipper with the missing guard.
• Create clean short transitions on the sides and at the nape of the neck.
• Easily switch to the blade adjustment for lengths under 3 mm, which the FX660SE has from the factory.

How to use it at home

1. Turn off the clipper and clear the hair from the blade.
2. Place the guard over the blade and press until it locks into place.
3. Check that it is securely attached before turning on the clipper.
4. Cut with even strokes, without pressing the guard into the scalp.
5. After cutting, remove it, brush off the hair, and store it with the other guards.

For which type of device

It is the 3 mm guard for the BaByliss PRO FX660SE hair clipper. It is not a set: you receive a single guard. For the FX8700, FX825, or FX895E clippers, choose the FXPCGE set, made for them.

Specifications

Cutting length	3 mm
Compatibility	BaByliss PRO FX660SE hair clipper
Contents	1 guard

What else you need

• BaByliss PRO FX4in1 Spray for blade maintenance
• Wahl Oil for hair clipper blades
• Straight cutting comb
• Wahl cutting cape

ProBeauty Tip. For a smooth transition under 3 mm, remove the guard and use the FX660SE blade adjustment, which ranges from 3.2 to 0.8 mm. This way, you blend the 3 mm guard with the short-cut area.

BaByliss PRO 35087000 is the 45 mm replacement blade for the ChromFX FX8700E hair clipper. The brand lists it as the replacement blade on the clipper's page. It is a Japanese steel blade with a very sharp V-shaped cutting angle, designed for fading.

What it does for you

• Restores the cut to like-new condition, as it is the brand's recommended replacement blade for the FX8700E.
• Cuts cleanly and precisely, thanks to the Japanese steel with a V-shaped cutting angle.
• Gets very close to the skin: it is a flat blade, ideal for blending harsh lines.
• Covers a wide area, with a width of 45 mm.

How to use it at home

1. Turn off the clipper and set the fine adjustment lever on the left to the top position.
2. Loosen the screws with a screwdriver and set them aside.
3. Lift the old moving blade slightly and replace it with the new one on the oscillator.
4. Place the new fixed blade, with the moving blade centered and parallel to it, to avoid injury.
5. Tighten the screws back into place.
6. Clean and lubricate the blade regularly with BaByliss PRO 4 in 1 spray or oil.

For which type of device

It is the replacement blade for the BaByliss PRO ChromFX FX8700E hair clipper, as stated on the clipper's page. The brand does not list this code for other FX8700 variants. If you have the FX8700 Gold, Boost+, or LO-PROFX FX825, choose a blade with compatibility published for the entire series.

Specifications

Width	45 mm
Material	Japanese stainless steel
Cut	V-shaped angle, flat blade for fading
Compatibility	ChromFX FX8700E

What else you need

• BaByliss PRO ChromFX FX8700E hair clipper
• BaByliss PRO 4 in 1 spray for blade maintenance
• Wahl oil for lubricating blades, 100 ml
• Wahl Blade Ice spray for cooling and cleaning blades

ProBeauty tip. Check the label under the clipper to make sure it says FX8700E, not just FX8700. For the other variants, blades compatible with the entire series are the safe choice.

Wahl Guard No. 8 Black 25 mm is the standard Wahl 25 mm guard, sold separately. Wahl says that No. 8 leaves approximately 25 mm of hair: you shorten long hair without losing much length. You get it to replace a lost or broken one, or to have a second one on hand.

What it does for you

• Cuts evenly at 25 mm over the entire area you pass the clipper over.
• You use it to shorten long hair without losing much length.
• You complete the set without having to buy all 8 guards again.
• Works on several Wahl clippers: the brand lists it as compatible with 8 models, from Super Taper to Balding.

How to use it at home

1. Turn off the clipper and brush the hair off the blade.
2. Snap the guard onto the blade and press until it clicks. Check that it is secure before turning it on.
3. Cut against the direction of hair growth, using even strokes.
4. Pass over the same area several times to catch the lying hairs.
5. After cutting, clean it with a small brush. From time to time, wash it with warm water and mild soap and let it dry completely.

For what type of clipper

Wahl lists it as compatible with Super Taper, Super Taper Cordless, Legend, Legend Cordless, Senior Cordless, Magic Clip, Magic Clip Cordless, and Balding. You receive a single guard, not a set. It is not for outline clippers or for clippers with slide-on guards, such as Kuno or ChromStyle.

Specifications

Number	No. 8
Cutting length	25 mm
Color	black
Contents	1 guard
Compatibility	Super Taper, Super Taper Cordless, Legend, Legend Cordless, Senior Cordless, Magic Clip, Magic Clip Cordless, Balding

What else you need

• Wahl Guard No. 7, shorter
• Complete Wahl Premium Guard Set
• Wahl Magic Clip Cordless Clipper
• Wahl Clipper Blade Oil

ProBeauty Tip. No. 8 is useful for taking off only the ends. Cut a little with it first, check the length in the mirror, then decide whether to go down to No. 7 (22 mm).

Wahl No. 7 Black 22 mm Guard is the standard Wahl 22 mm guard, sold separately. Wahl says that No. 7 leaves approximately 22 mm of hair, a length commonly used to style and taper longer hair. Get it to replace a lost or broken one, or to have a spare on hand.

What it does for you

• Cuts uniformly to 22 mm over the entire area you pass over with the clipper.
• Use it to style and taper longer hair.
• Complete your set without having to buy all 8 guards again.
• Works with several Wahl clippers: the brand lists it as compatible with 8 models, from the Super Taper to the Balding.

How to use it at home

1. Turn off the clipper and brush the hair off the blade.
2. Snap the guard onto the blade and press until it clicks into place. Check that it is securely attached before turning it on.
3. Cut against the direction of hair growth, using even strokes.
4. Pass over the same area several times to catch lying hairs.
5. After cutting, clean it with a small brush. Occasionally, wash it with warm water and mild soap and let it dry completely.

For what type of clipper

Wahl lists it as compatible with the Super Taper, Super Taper Cordless, Legend, Legend Cordless, Senior Cordless, Magic Clip, Magic Clip Cordless, and Balding. You receive a single guard, not a set. It is not for outline clippers or clippers with slide-on guards, such as the Kuno or ChromStyle.

Specifications

Number	No. 7
Cutting length	22 mm
Color	black
Contents	1 guard
Compatibility	Super Taper, Super Taper Cordless, Legend, Legend Cordless, Senior Cordless, Magic Clip, Magic Clip Cordless, Balding

What else you need

• Wahl No. 6 guard, shorter
• Wahl No. 8 guard, longer
• Complete Wahl Premium guard set
• Wahl Magic Clip Cordless clipper
• Wahl clipper blade oil

ProBeauty tip. On longer hair, first comb the hair against the direction of growth. The clipper with No. 7 catches it evenly and does not leave patches.

Wahl No. 6 Black 19 mm Guard is Wahl's standard 19 mm guard, sold separately. Wahl says that No. 6 leaves approximately 19 mm of hair, for longer, classic haircuts. Get it to replace a lost or broken one, or to have a spare on hand.

What it does for you

• Cuts uniformly at 19 mm over the entire area you pass over with the clipper.
• Use it for longer, classic haircuts.
• Complete your set without having to buy all 8 guards again.
• Works with several Wahl clippers: the brand lists it as compatible with 8 models, from the Super Taper to the Balding.

How to use it at home

1. Turn off the clipper and brush the hair off the blade.
2. Place the guard on the blade and press until it clicks into place. Check that it is secure before turning it on.
3. Cut against the direction of hair growth, using even strokes.
4. Pass over the same area several times to catch the lying hairs.
5. After cutting, clean it with a small brush. Occasionally, wash it with warm water and mild soap and let it dry completely.

For which type of clipper

Wahl lists it as compatible with the Super Taper, Super Taper Cordless, Legend, Legend Cordless, Senior Cordless, Magic Clip, Magic Clip Cordless, and Balding. You receive a single guard, not a set. It is not for outline clippers or clippers with slide-on guards, such as the Kuno or ChromStyle.

Specifications

Number	No. 6
Cutting length	19 mm
Color	black
Contents	1 guard
Compatibility	Super Taper, Super Taper Cordless, Legend, Legend Cordless, Senior Cordless, Magic Clip, Magic Clip Cordless, Balding

What else you need

• Wahl No. 5 guard, shorter
• Wahl No. 7 guard, longer
• Complete Wahl Premium guard set
• Wahl Magic Clip Cordless clipper
• Wahl clipper blade oil

ProBeauty tip. On thicker hair, pass the clipper over it several times from different directions. No. 6 leaves a lot of length, and lying hairs are easily missed on the first pass.

Wahl Guard No. 4 Black 13 mm is the standard Wahl 13 mm guard, sold separately. Wahl says that No. 4 leaves approximately 13 mm of hair, a length commonly used for crew cuts and brush cuts. Get it to replace a lost or broken one, or to have a spare on hand.

What it does for you

• Cuts uniformly to 13 mm over the entire area you pass the clipper over.
• Use it for crew cuts and brush cuts.
• Complete your set without having to buy all 8 guards again.
• Works with several Wahl clippers: the brand lists it as compatible with 8 models, from the Super Taper to the Balding.

How to use it at home

1. Turn off the clipper and brush the hair off the blade.
2. Snap the guard onto the blade and press until it clicks into place. Check that it is securely attached before you start.
3. Cut against the direction of hair growth, using even strokes.
4. Pass over the same area several times to catch the lying hairs.
5. After cutting, clean it with a small brush. From time to time, wash it with warm water and mild soap and let it dry completely.

For what type of clipper

Wahl lists it as compatible with the Super Taper, Super Taper Cordless, Legend, Legend Cordless, Senior Cordless, Magic Clip, Magic Clip Cordless, and Balding. You receive a single guard, not a set. It is not for outline clippers or clippers with slide-on guards, such as the Kuno or ChromStyle.

Specifications

Number	No. 4
Cutting length	13 mm
Color	black
Contents	1 guard
Compatibility	Super Taper, Super Taper Cordless, Legend, Legend Cordless, Senior Cordless, Magic Clip, Magic Clip Cordless, Balding

What else you need

• Wahl Guard No. 3, shorter
• Wahl Guard No. 5, longer
• Complete Wahl Premium Guard Set
• Wahl Magic Clip Cordless Clipper
• Wahl Clipper Blade Oil

ProBeauty Tip. For a crew cut, leave No. 4 on top and go down to No. 3 (10 mm) on the sides. Blend the areas by passing No. 4 only over the transition line.

Wahl No. 2 Black 6 mm Guard is the standard Wahl 6 mm guard, sold separately. Wahl says that No. 2 leaves approximately 6 mm of hair: a short haircut, but slightly longer. Get it to replace a lost or broken one, or to have a spare on hand.

What it does for you

• Cuts uniformly at 6 mm over the entire area you pass the clipper over.
• Use it for a short haircut, slightly longer than a buzz cut.
• Complete your set without having to buy all 8 guards again.
• Works with several Wahl clippers: the brand lists it as compatible with 8 models, from the Super Taper to the Balding.

How to use it at home

1. Turn off the clipper and brush the hair off the blade.
2. Place the guard on the blade and press until it clicks into place. Check that it is secure before turning it on.
3. Cut against the direction of hair growth, using even strokes.
4. Pass over the same area several times to catch the lying hairs.
5. After cutting, clean it with a small brush. From time to time, wash it with warm water and mild soap and let it dry completely.

For what type of clipper

Wahl lists it as compatible with the Super Taper, Super Taper Cordless, Legend, Legend Cordless, Senior Cordless, Magic Clip, Magic Clip Cordless, and Balding. You receive a single guard, not a set. It is not for outline clippers or clippers with slide-on guards, such as the Kuno or ChromStyle.

Specifications

Number	No. 2
Cutting length	6 mm
Color	black
Contents	1 guard
Compatibility	Super Taper, Super Taper Cordless, Legend, Legend Cordless, Senior Cordless, Magic Clip, Magic Clip Cordless, Balding

What else you need

• Wahl No. 1 Guard, shorter
• Wahl No. 3 Guard, longer
• Complete Wahl Premium Guard Set
• Wahl Magic Clip Cordless Clipper
• Wahl Clipper Blade Oil

ProBeauty Tip. If you are cutting with the clipper for the first time, start with No. 2 over the entire head. See how it looks and only then go down to No. 1 (3 mm) on the sides.