BaByliss PRO

The BaByliss PRO Elipsis 3000 is a hair straightener with floating 31 × 110 mm plates, designed for salon use but easy to use at home too. The housing is elliptical, so the same plate can straighten your hair or create curls and waves. It reaches up to 230 °C, so it can handle thick or curly hair.

What it does for you

• Straightens hair in fewer passes, thanks to its wide and long plates, with over 34 cm² of straightening surface.
• Glides easily through the hair: the EP Technology 5.0 plates have a very fine metal coating that reduces friction.
• Creates curls too: the elliptical housing heats up, and the locking system keeps the plate closed when you twist it.
• Reduces frizz and adds shine with the IonMultiplier ion generator.
• Maintains a constant temperature from the first to the last strand with FullWave Thermal Science heating.
• Switches off automatically after approximately 72 minutes of inactivity.

How to use it at home

1. Start with washed and completely dry hair. Apply a heat protectant product to the lengths.
2. Briefly press the power button and select the temperature using the +/− buttons. The LED display shows your selected level.
3. Divide the hair into thin sections and secure them with clips. Start at the nape of the neck.
4. Place the section between the plates, approximately 1 cm from the scalp, and gently pull the plate toward the ends in a single motion.
5. For curls, close the plate around the section, twist it half a turn, and slowly lower it toward the ends.
6. Finally, press and hold the power button to turn it off, unplug it, and let it cool on the silicone mat.

For what hair type

It is suitable for all hair types because you can choose the temperature. The BaByliss PRO manual recommends 150 °C for fine, color-treated, or damaged hair, 170 °C for normal hair, 190 °C for thick hair, and 210–230 °C for curly and very resistant hair. If you have short hair below the chin, the 31 mm width can be harder to maneuver at the roots; a narrower plate will be more convenient.

Specifications

What else you need

• Osis+ Flatliner heat protectant serum for straightening with a flat iron
• Wella EIMI Thermal Image heat protectant spray
• Hair sectioning clips
• BaByliss PRO flat brush with boar bristles

ProBeauty tip. Do not pass the same section through twice at 230 °C. If the hair does not straighten on the first pass, work with thinner sections instead of using more heat.

The BaByliss PRO Excess HQ is a 2600 W hair dryer, made in Italy, with an AC motor designed for intensive use. The air comes out at 152 km/h and a pressure of 1082 Pa, so it dries thick or very dense hair quickly. It is right for you if you have a lot of hair and want a blowout that lasts even in damp weather.

What it does for you

• Dries thick hair quickly: 2600 W, an airflow of 75 m³/h and a drying rate of 6.6 g of water per minute.
• The hairstyle holds up better to humidity, thanks to the high air pressure and controlled heat.
• Reduces frizz and adds shine, thanks to the central ion generator.
• Works precisely with the round brush: the 2 very narrow nozzles, 6 × 75 mm and 6 × 90 mm, are slightly angled and follow the shape of the brush.
• Sets the shape at the end, with the cool air button or the continuous cool air setting.
• Easy to maintain: the back filter is removable for cleaning.

How to use it at home

1. Towel-dry your hair thoroughly and apply a heat protectant to the lengths.
2. First, dry the roots without a nozzle, until the hair is almost dry.
3. Attach one of the two nozzles, designed by the brand for different lengths and textures.
4. Divide the hair into sections and secure them with clips. Stretch each section over a round brush and direct the air from the roots to the ends.
5. When the section is dry, press the cool air button for a few seconds to set the shape.
6. Finally, unplug the dryer and clean the back filter regularly.

For what type of hair

BaByliss PRO recommends it for all hair types, even the coarsest. With 6 heat and speed settings, you can use it gently on fine hair. On short and fine hair, 2600 W and 555 g can be too much; a lighter model will be more convenient for you.

Specifications

What else you need

• BaByliss PRO BABD11E Diffuser, compatible with Excess HQ
• Olivia Garden Ceramic+Ion SpeedXL 45 Round Brush, for blowouts
• L’Oréal Professionnel Flex Blowdry Leave-in Cream, with heat protection
• Wella EIMI Thermal Image Heat Protectant Spray
• Hair Sectioning Clips

ProBeauty Tip. With the nozzle attached, the air exceeds 140 °C at maximum speed. On fine or bleached hair, lower the heat by one setting and keep the dryer moving at all times.

The BaByliss PRO Dial-a-Heat 25 mm is a classic curling iron with a Titanium-Tourmaline coated barrel. It is designed for salon use, but is easy to use at home for defined curls. Choose the exact temperature from a 30-step selector, from 130 to 200 °C.

What it does for you

• Ready to work quickly: heats up very quickly after switching on.
• Heats the entire barrel evenly, thanks to the Titanium-Tourmaline coating, which is highly resistant to wear.
• Tailor the heat to your hair type, with linear adjustment in 30 steps, up to 200 °C.
• Keep the strand under control with the lever clamp and choose whether the curl turns inward or outward.
• Work without burning yourself: the tip remains cool, and the integrated metal stand keeps the barrel away from the table.
• Switches off automatically after approximately 72 minutes of inactivity.

How to use it at home

1. Start with clean and completely dry hair. Apply a heat protection product to the lengths.
2. Switch on the curling iron and choose the temperature on the selector. The indicator light flashes until the desired temperature is reached.
3. Divide the hair into strands and secure the rest with clips. Comb each strand before curling it.
4. For an inward curl, place the clamp over the strand. For an outward curl, place the clamp underneath.
5. Wrap the strand around the barrel without touching the scalp, hold for a few seconds, then open the clamp and release the curl.
6. Let the curls cool, then arrange them with your fingers. After use, switch off the device and unplug it.

For what hair type

It works on any hair type, from fine and fragile to very thick. BaByliss PRO recommends a lower temperature for fine hair and a higher one for thick, curly, or resistant-to-curling hair. If you want wide waves rather than curls, a larger diameter, such as the 32 mm version, will suit you better.

Specifications

What else you need

• Wella EIMI Thermal Image Heat Protection Spray
• L’Oréal Professionnel Pro Longer 10-in-1 Cream with Heat Protection
• Hair Sectioning Clips
• Osis+ Elastic Flexible Hairspray for Curls That Stay Movable
• BaByliss PRO Flat Brush with Boar Bristles

ProBeauty Tip. The Dial-a-Heat has no display, only a selector. Once you find the setting that gives you the best curls, remember it so you can start from there next time.

BaByliss PRO Elipstyle is a hair straightener with floating titanium plates measuring 31 × 110 mm and a lightweight curved metal housing. With it, you can straighten your hair, but also create curls or waves, because the rounded shape of the housing works like a curling iron. The slim profile lets you get closer to the roots.

What it does for you

• Glides through hair without snagging, thanks to the floating titanium plates with a smooth surface.
• Heats up very quickly and recovers quickly between sections: the Advanced Ceramics system distributes heat evenly, without hot spots.
• Creates curls and waves: the curved housing heats up, and the plates lock closed when you twist the iron.
• Doesn't force you to grip tightly: the floating plates mold to the section and hold it firmly, so your wrist tires less.
• Adds shine to the hair, thanks to ionic technology.
• Shuts off automatically after 72 minutes.

How to use it at home

1. Start with washed and completely dry hair. Apply a heat protection product to the lengths.
2. Turn on the iron and choose one of the 5 digital settings. For fine or color-treated hair, start with 150 °C.
3. Secure the top section of hair with clips and work on thin sections, from the nape of the neck upwards.
4. Place the section between the plates near the roots, without touching the scalp, and gently pull the iron towards the ends.
5. For curls, close the iron on the section, twist it half a turn, and slowly lower it towards the ends.
6. Finally, turn off the iron, unplug it, and let it cool on the heat-resistant mat.

For what type of hair

It works on all hair types, because you can choose the temperature between 150 and 230 °C. The wide 31 mm plates cover larger sections, so they are more suitable for long or thick hair. If you have very short hair, a narrower iron will be easier to maneuver.

Specifications

What else you need

• Schwarzkopf Fibre Clinix Fibre Sealer anti-frizz heat protection
• ETB Hair Stylesse Shield Smooth heat protection spray
• Clips for securing hair sections
• Olivia Garden Fingerbrush curved brush, for detangling before straightening

ProBeauty tip. For loose waves, take sections as wide as the plates and move faster; for tight curls, take thin sections and move slowly. Let the curls cool before releasing them with your fingers.

BaByliss PRO FoilFX02 Gold is the double foil shaver from the 4Artists range, with an all-metal body in a gold finish. Use it after the contour trimmer when you want smooth skin for fades, on the neck or cheeks. It does not cut, it only shaves very short hair.

What it does for you

• Leaves your skin smooth on fades and along the neckline, without irritation, thanks to the ultra-thin, floating foils.
• Follows the shape of the head: the two foils are offset and "hug" the contours of the head and face.
• You finish faster, with a 44 mm shaving area and a motor delivering 11,000 blade movements per minute.
• It does not leave you halfway: up to 3 hours on battery power, then continue with the 3 m cable.
• It stops when the cap is fitted, so you won't leave it switched on in your bag.

How to use it at home

1. The first time, charge it for 3 hours continuously, with the switch set to O. The battery reaches its maximum capacity after 3 charge and discharge cycles.
2. Shorten the hair to under 1 mm with a contour trimmer before shaving.
3. Remove the cap, switch on the device and hold it perpendicular to the skin.
4. Move it gently against the direction of hair growth, without applying pressure. Stretch the skin with your fingers on the neck and under the jaw.
5. Turn it off, press the side button, lift the foil unit and brush the hair off the blades.
6. Weekly, rinse the shaving head under running water, let it dry and snap it back into place.

For what type of work

It is suitable for skin fades, clean shaves on very short hair, cleaning the neck and stray hairs on the face. It is not for grown-out beards or long hair. If you have sensitive skin or allergies, test it first on a small area of your arm or leg.

Specifications

What else you need

• FXRF2GE foil and blade replacement set for FoilFX02 Gold
• BaByliss PRO 4-in-1 blade maintenance spray
• SkeletonFX Gold contour trimmer, from the same gold collection

ProBeauty tip. Once every six months, if you do not use it often, charge it for 3 hours: this way the NiMH battery retains its capacity. When you are not using it, leave the switch on O.

The BaByliss PRO Elipsis 3100 professional hair straightener is the ideal choice for professionals and home users who want top-notch styling results. Designed with advanced technology, this straightener ensures perfect hair straightening without damage, also offering versatility for curls and waves.

Key Features:

• Ultra-Fast Ceramic Plates: Heat up quickly and maintain a constant temperature for impeccable styling.
• Plate Width: 24 mm, ideal for short and medium-length hair, for medium curls and waves.
• EP Technology 5.0: Offers 3 times greater plate durability and a smooth surface for enhanced hair protection.
• Precise Thermal Control: 5 temperature settings (150°C - 230°C) and LED display for optimal control.
• Styling Versatility: Ideal for straightening, curls, or waves, with integrated locking system.
• Comfort and Safety: 2.7 m swivel cord and thermal shields for finger protection.

Advantages:

• Hair Protection: Thanks to advanced technology, hair remains healthy and protected from damage or breakage.
• Professional Performance: Ideal for all hair types, from perfect straightening to defined curls.
• Extended Durability: Electroplated plates ensure increased durability and enhanced resistance to chemicals.

How to Use:

1. Choose the desired temperature (between 150°C and 230°C) using the controls and wait for the straightener to heat up.
2. Apply the straightener to clean, dry hair, either to straighten it or to create curls or waves.
3. After use, disconnect the straightener from the power source and let it cool before storing.
4. Warning! It is recommended not to leave the straightener plugged in when the product is not in use!

Package Contents:

• 1 BaByliss PRO Elipsis 3100 hair straightener
• 1 User guide
• 1 Thermal finger shield
  

This product is recommended for anyone who wants professional performance at home, while protecting their hair and offering styling flexibility. With advanced ceramic plates and technology that guarantees fast and long-lasting results, the BaByliss PRO Elipsis 3100 is the perfect partner for impeccable styling, whether you opt for straight hair or perfect curls.

The BaByliss PRO FoilFX02 GoldFX FXRF2GE is the replacement set for the FoilFX02 GoldFX double foil shaver: a double foil shaving head and 2 single blades. Install it when you want the shaver to once again shave very close to the skin, on the neck, face, and hairline. It is a replacement part, not a shaver, so you need the FoilFX02 to use it.

What it does for you

• Replace everything at once: the foil head and both blades, exactly as the FoilFX02 manual requires.
• Shave very close to the skin on the neck, face, and around the entire hairline.
• The same 44 mm shaving area, so you work just as quickly as before.
• Snap-on installation: the blades and head each click into place.
• You can change the color of the head: the brand says that the chameleon, gold, chrome, and gunsteel finishes can be combined to your liking.

How to use it at home

1. Turn off the shaver. Press the release button on the side and pull the shaving head up and off the body of the shaver.
2. Remove the old blades one by one: grasp each blade by its two heads and pull it gently upwards.
3. Insert the new blades, one at a time. Align the blade guide with the guide rail and press gently until you hear a click.
4. Place the new head over the blades and press gently until it clicks into place. Be careful not to bend the foil or blades.
5. Turn on the shaver and check that it works correctly before the first shave.

For what type of shaver

The set is made for the FoilFX02 GoldFX shaver. The BaByliss PRO page says it can be used on any BaByliss PRO double foil shaver, so it also works on the FoilFX02 metal, GunsteelFX, or ChameleonFX. For single foil shavers, for the UVFOIL02, FXONE, and FX3, the brand has separate sets.

Specifications

What else you need

• BaByliss PRO FoilFX02 Gold shaver, for which the set is made
• BaByliss PRO FoilFX02 metal shaver, with double foil
• BaByliss PRO 4-in-1 spray for shaver maintenance
• Wahl oil for lubricating the blades
• Wahl Blade Ice spray for cleaning the blades

ProBeauty tip. Clean the blades with the brush after every shave and lubricate them regularly with a few drops of oil. The FoilFX02 manual clearly states that without cleaning and lubrication, the shaver will not work correctly.

The BaByliss PRO Advanced Curl 25 mm is a curling iron with an extra-long barrel coated in Titanium Diamond. The long barrel allows you to curl more hair at once, which is particularly useful if you have long hair. It reaches up to 220°C, so it can also handle very thick hair.

What it does for you

• Finish faster with an even result: the Titanium Diamond coating, made of titanium and diamond powder, withstands high temperatures and intensive use.
• Fine temperature control: 30 settings with linear adjustment, from 135°C for greater protection up to 220°C.
• Curls that last even on very thick hair, thanks to the maximum temperature of 220°C.
• You know when it's ready: the light indicator flashes until it reaches the set temperature.
• Work safely: cool tip, integrated supports, plus a heat-resistant mat and styling glove included in the box.
• Switches off automatically after approximately 72 minutes of inactivity.

How to use it at home

1. Start with clean, completely dry hair. Apply heat protection to the lengths.
2. Turn on the curling iron and set the temperature. For fine or fragile hair, start at 135°C and increase only if necessary.
3. Wait until the indicator stops flashing. Put the heat glove on the hand you use to guide the section.
4. Divide the hair into sections and secure the rest with clips.
5. Wrap the section around the barrel without touching the scalp, hold for a few seconds, then release the curl.
6. Let the curls cool before styling them. Finally, turn off the device and let it cool on the heat-resistant mat.

For which hair type

BaByliss PRO recommends it for all hair types: the lower settings protect fine hair, while 220°C helps very thick hair hold the curl. The extra-long barrel is designed for medium and long hair. On short hair above the chin, the length of the barrel offers no particular advantage.

Specifications

What else you need

• L’Oréal Professionnel Pro Longer 10-in-1 cream for lengths, with heat protection
• ETB Hair Stylesse Shield Smooth heat protection spray
• Schwarzkopf Professional sectioning clips
• Wella EIMI Mistify Me Light light-hold hairspray
• BaByliss PRO flat brush

ProBeauty tip. On the long barrel, wrap the section in a spiral, with the coils next to each other, not overlapping. This way, the curl will be the same thickness from root to tip.

BaBylissPRO Double Foil FX3 Black Shaver

The BaBylissPRO Double Foil FX3 Black has been voted by numerous barbers as the most powerful and efficient shaving machine in the industry. This high-quality shaver combines power, speed, and precision to deliver an impeccable shaving experience.

Key Features

• High-Speed Rotary Motor: Equipped with an ultra-fast 10,000 rpm DC motor, the BaBylissPRO FX3 ensures fast and precise cutting.
• Titanium Foil Cutting Blades: The ultra-thin, hypoallergenic gold-coated double offset foil system provides a perfect cut, adapting to the contours of the head or face.
• Lightweight and Ergonomic Design: Weighing much less than ordinary metal shavers, the FX3 is easy to handle and ideal for long periods of use.
• LED Battery Indicators: The 4 LED lights indicate battery levels: 75%, 50%, 25%, 0%, so you always know when charging is needed.
• Lithium-Ion Battery: Provides up to 3 hours of cordless operation and a quick 3-hour charging time for maximum efficiency.
• Automatic Shut-Off Cap: The machine automatically turns off when the cap is placed on from any direction, for safety and energy saving.
• Easy Cleaning and Maintenance: The FX3 is designed for quick and simple cleaning, ensuring long-lasting durability and performance.
• Equipped with Hanging Hook: Facilitates storage and quick access to the device during work.

Benefits

• Top Performance: The powerful motor and high-quality blades ensure professional results with every use.
• Precision and Control: The ergonomic design and advanced technology offer maximum control for perfect contours.
• Durability and Reliability: Robust construction and quality materials ensure a long lifespan for the device.

Choose the BaBylissPRO Double Foil FX3 Black to experience professional quality and performance in every detail. Perfect for use in barber shops and for home use, the FX3 is the ideal tool for exceptional results every time.

For more details and purchases, visit our website and add this essential product to your grooming kit!

BaByliss PRO SkeletonFX GoldFX is a contour trimmer from the 4Artists line, with an all-metal gold casing and a 40 mm DLC/Titanium T-blade. The blade is exposed at 360°, so you can see the line from any hand position. It is for hairdressers and for those who trim their own contours and beards at home.

What it does for you

• See exactly where you cut: no casing covers the blade, so the line at the neck or beard remains visible.
• Cut cleanly and close to the skin, with the DLC/Titanium blade adjustable to zero-gap with the included tool.
• The blade stays cooler: the brand says that the exposed blade does not retain heat, and the DLC/Titanium layer works at a lower temperature.
• About 120 minutes cordless after 3 hours of charging, and when it runs out of battery you can work with a cord.
• Constant speed, with the digital EDM Technology motor at 7200 blade movements per minute.

How to use it at home

1. Before the first use, charge it for 3 hours uninterrupted. Maximum capacity appears after 3 charge and discharge cycles.
2. With the switch on 0, put a drop of the included oil on the blades and wipe off the excess.
3. Charging: connect the plug to the base of the machine and the adapter to the outlet. The LED flashes, and when it stays continuously lit, the battery is full.
4. Turn it on, then trace the line with the corner of the blade, in short movements, on dry and combed hair.
5. After use, clean the wires with the brush, put a few drops of oil and mount the blade protection cap.

For what type of work

It is suitable for contours at the neck and temples, the beard line, details around the ears, hair tattoos and fine lines. It does not have guide combs and is not made for shortening hair on the head; for that you use a hair clipper.

Specifications

What else you need

• BaByliss PRO 4 in 1 spray for daily blade cleaning
• Wahl oil for blades
• FX707ZE replacement blade, 40 mm T-blade
• Titanium T-blade with 2.0 mm deep tooth FX707G2ZE
• FX7870GBPBASE charging station for SkeletonFX
• Wahl haircutting cape

ProBeauty tip. When you redo the zero-gap, leave the black blade teeth 0.5–1 mm below the edge of the gold blade, as shown in the manual. Test on a small area of skin before the full contour.

The BaByliss PRO SkeletonFX Gunsteel is an edger from the 4Artists line, with a 40 mm Japanese steel T-blade exposed along its entire length. See exactly where you cut from any angle, so hairline, beard, and hair designs come out clean. It works corded or cordless and comes with a charging stand.

What it does for you

• See the line you cut: the T-blade is exposed 360°, without a housing that blocks your view.
• Cut very close to the skin, because the blade adjusts to zero-gap with an included tool, without having to disassemble it.
• Work for about 120 minutes cordlessly after 3 hours of charging. A quick 30-minute charge gives you about 30 minutes of work.
• Always know how much you have left: the red LED flashes when there are approximately 10 minutes of battery life left.
• Keeps up with thick hair, with the EDM Technology digital motor at 7200 blade movements per minute.

How to use it at home

1. Before first use, charge it continuously for 3 hours. The battery reaches maximum capacity after 3 full charge and discharge cycles.
2. With the switch on 0, put a drop of oil on the blades and wipe off the excess with a dry cloth.
3. Work on dry and combed hair. For straight lines at the neck and temples, gently support the corner of the blade on the skin.
4. Around the ear and on the beard line, make short passes and check the line from the side after each pass.
5. At the end, remove the hair with the included brush and put a few drops of oil on the blades.
6. Place it in the stand with the switch on 0, so it charges.

For what type of work

It is designed for finishing: the hairline and temples, the beard line, the edges around the ears, designs and fine lines in short hair. It does not have guide combs, so you do not cut all your hair with it; for that you need a hair clipper.

Specifications

What else you need

• BaByliss PRO 4-in-1 spray for cleaning and cooling the blades
• Wahl oil for hair clipper blades
• Titanium T-Blade with 2.0 mm deep tooth FX707C2ZE, for FX7870
• Carbon finishing comb
• Wahl cutting cape

ProBeauty tip. The manual limits direct plug-in use to 20 minutes. If the battery ran out in the middle of an edging, put the machine in the stand for 30 minutes: it gives you about 30 minutes of work.

The BaBylissPRO Dial-a-Heat 32 mm is the largest diameter curling iron in the Dial-a-Heat range. Choose it for large, soft curls and flowing waves. The barrel is coated with Titanium-Tourmaline, and you can adjust the temperature using the selector, with 30 settings up to 200°C.

What it does for you

• Creates large curls and waves thanks to its 32 mm diameter.
• Distributes heat evenly and consistently across the entire barrel with its highly wear-resistant Titanium-Tourmaline coating.
• Gives you precise control: the lever clamp securely holds the hair and lets you choose the curl direction.
• Suitable for all hair types, from fine and fragile to very thick, with 30 settings between 130 and 200°C.
• Shows you when it's ready: the light indicator flashes until the selected temperature is reached.
• Saves energy: it automatically switches off after approximately 72 minutes of inactivity.

How to use it at home

1. Dry your hair thoroughly and apply heat protection. Comb it to remove any knots.
2. Turn on the curling iron and select the temperature: lower for fine hair, higher for thick or hard-to-curl hair.
3. Work on wide sections of 3–4 cm, securing each one with a clip to create soft waves.
4. Place the clamp over the section for a curl that turns inward, or underneath for one that turns outward.
5. Roll the section around the barrel without touching your scalp, hold for a few seconds, and release. Between sections, rest the device on the metal stand.
6. Let the waves cool, then loosen them with your fingers or a wide-tooth brush.

For which hair type

It works on all hair types because the temperature can be finely adjusted. It is best suited for medium- or long hair, where a large curl has room to form. If you have short hair or want tighter curls, choose a smaller diameter, such as 19 or 25 mm.

Specifications

What else you need

• ETB Hair Stylesse Shield Smooth heat protection spray
• Schwarzkopf Session Label The Coat multi-protective spray
• ETB Hair clips for holding hair
• Osis+ Soft Dust volumizing powder for roots
• Olivia Garden Fingerbrush curved brush for loosening waves

ProBeauty tip. For modern waves, alternate the curl direction from one section to the next: one forward, the next backward. This prevents the waves from clumping together.

The BaByliss PRO BB1E is a large flat brush with boar bristles, designed for straight brushing and everyday styling. Use it for detangling, blow-drying, smoothing, and finishing. The boar bristles smooth and add shine, while the rubberized handle provides a secure grip.

What it does for you

• Smooths and adds shine thanks to the boar bristles.
• Achieves a straight blow-dry: the wide surface smooths the hair as you dry it.
• Helps with everyday detangling, morning or evening, on dry hair.
• Won't slip from your hand: the rubberized handle has a textured matte finish and provides a secure grip even when your hands are wet.
• Replaces several brushes: the brand describes it as an all-purpose brush for detangling, drying, smoothing, and styling.

How to use it at home

1. To detangle, start at the ends and gradually work your way up to the roots using short strokes.
2. For a straight blow-dry, pre-dry the hair with a hairdryer until it is slightly damp, then apply a heat protectant.
3. Divide the hair into sections and secure them with clips.
4. Place the brush under a section of hair at the roots and slowly pull it toward the ends. Direct the hairdryer's airflow downward, following the direction of the bristles.
5. Finally, brush through the dry hair several times to add shine.

For which hair type

Suitable for all hair types that you want to wear straight and shiny. Its wide design quickly covers large areas, making it most useful for medium- and long hair. It does not create volume at the roots or curls; choose a round brush for that.

Specifications

What else you need

• BaByliss PRO Levante Hairdryer
• Osis+ Flatliner Heat Protection Serum for smoothing
• Fibre Clinix Fibre Sealer Anti-Frizz Heat Protection
• 52 mm BaByliss PRO Ceramic Round Brush for volume

ProBeauty Tip. Use it at the end, after flat-ironing or blow-drying, on completely dry hair: a few slow strokes from the roots to the ends add shine without another pass of heat.

The BaByliss PRO FoilFX02 Gunsteel is a double foil shaver with an all-metal body from the 4Artists range. It is designed for barbers who create skin fades and clean up contours, but works just as well at home. It shaves close to the skin on very short hair; it is not made for long beards.

What it does for you

• Shaves close to the skin without pressure: the two ultra-thin, floating, offset foils follow the contours of the head and face.
• Covers more in one pass, with a 44 mm shaving area.
• Hypoallergenic titanium foils, for a smooth shave with less irritation.
• Works corded or cordless: up to 3 hours of runtime after 3 hours of charging.
• Cuts quickly: the rotary DC motor makes 11,000 blade movements per minute.
• Stops when you put the cap on, and the shaving head is easily removed for cleaning.

How to use it at home

1. Before first use, charge it for 3 hours straight with the switch in the O position. The charging indicator lights up.
2. If the hair is over 1 mm long, trim it first with a contour trimmer. The shaver is for finishing only.
3. Remove the cap, move the switch to I, and hold the device perpendicular to the area you are shaving.
4. Move it gently against the direction of hair growth. In hard-to-reach areas, stretch the skin with your fingers. Do not press.
5. At the end, turn it off, press the side button, remove the shaving head, and clean the blades with the included brush.
6. Once a week, rinse only the shaving head under running water and leave it open to dry.

What type of work it is for

It is for finishing: skin fades, close shaves on very short hair, the neckline, and stray hairs on the face. It does not replace a hair clipper or contour trimmer for hair longer than 1 mm. If you have sensitive skin, test it on a small area of your arm first. Skin needs 2–4 weeks to get used to a new device.

Specifications

What else you need

• FXRF2GSE foil and blade replacement set for FoilFX02 Gunsteel
• BaByliss PRO 4-in-1 blade maintenance spray
• SkeletonFX Gunsteel contour trimmer, from the same collection

ProBeauty tip. Clean and lubricate the blades regularly: the BaByliss PRO manual states that otherwise the device will no longer work correctly. When you replace the foil, replace the blades too; never just one of the parts.

BaByliss PRO FoilFX02 Metal is the double foil shaver from the 4Artists range, in the classic metal finish. It has an all-metal body, works corded or cordless, and shaves to skin on fades, the neck, and cheeks. It is the barber's finishing tool, but you can easily use it at home too.

What it does for you

• Fade down to the skin and shave a clean bald head on very short hair.
• Shaves without irritating: the ultra-thin, floating foils sit close to the skin without scratching it.
• Captures the entire contour: the two offset foils adapt to the head and face.
• Work quickly, with a 44 mm shaving area and 11,000 blade movements per minute.
• Go from one client to the next without a break: up to 3 hours on battery, then with the 3 m cable.

How to use it at home

1. Charge it continuously for 3 hours before first use, with the device switched off.
2. Shorten the hair to under 1 mm with a trimmer.
3. Switch on the device and hold it at a right angle to the skin. Move it slowly against the direction of hair growth.
4. Do not press. Where the skin is soft, such as on the neck, stretch it with your fingers.
5. At the end, switch it off, remove the foil unit with the side button, and use the blade brush.
6. Put the protective cap back on and store it in the pouch.

For what type of work

Use it for skin fades, bald heads, the neckline, and stray hairs on the face. It is not for long beards or for cutting hair. If you have sensitive skin, do a test on your arm first; the skin gets used to a new device in 2–4 weeks.

Specifications

What else you need

• FXRF2E foil and blade replacement set for FoilFX02
• BaByliss PRO 4-in-1 blade maintenance spray
• SkeletonFX Gold trimmer

ProBeauty tip. Check the foil before each day of work. If it is bent, do not use it anymore: replace the entire set, foil and blades together, as required by the manual.

BaByliss PRO FoilFX01 is the compact, portable version of the FoilFX shavers from the 4Artists range. It has an all-metal body, a single foil, and runs on two AA batteries, included. Take it with you anywhere and finish your fade or outline without having to look for a power outlet.

What it does for you

• Work without a power outlet or charging: insert two AA batteries and you're done.
• Shaves close to the skin without irritation, with an ultra-thin, floating foil.
• Covers 40 mm in one pass, enough for the neck, throat, and cheeks.
• Cuts quickly: the DC motor delivers 8,500 blade movements per minute.
• Turns off when you put the cap on, so it won't drain in your bag.
• Built for travel: the body is made entirely of metal and comes with a storage pouch.

How to use it at home

1. Insert the two AA alkaline batteries from the box into the shaver.
2. First, shorten the hair with an outline trimmer. The FoilFX01 is for finishing only.
3. Remove the protective cap, turn on the shaver, and hold it flat against the skin.
4. Move it gently, without pressure, against the direction of hair growth.
5. Put the cap back on to turn it off.
6. Remove the shaving head and clean the blades with the included brush after each use.

What kind of work it's for

Use it for skin fades, cleaning up the neck, and stray hairs on the face. It's ideal for home barbers or as a backup shaver. If you shave your entire head daily, the FoilFX02, with its double foil and rechargeable battery, will be more suitable.

Specifications

What else you need

• BaByliss PRO 4-in-1 Blade Care Spray
• SkeletonFX Gold outline trimmer from the 4Artists range

ProBeauty tip. Keep two spare AA batteries in the pouch. When the motor starts to run more slowly, replace both at the same time so the foil cuts cleanly again.

The BaByliss PRO Caruso HQ is a 2400 W hair dryer made in Italy, with a long-lasting AC motor. It delivers air at 172 km/h and a pressure of 1366 Pa, but weighs only 535 g. It is for you if you want a quick blowout that lasts longer without tiring your hand.

What it does for you

• Dries very quickly: 172 km/h, 83 m³/h airflow and 6.4 g of water dried per minute.
• The blowout resists humidity better, thanks to the high air pressure and controlled heat.
• It does not tire your arm: 535 g and a handle balanced on the center of gravity axis.
• Reduces frizz and adds shine, thanks to the central ion generator.
• Works precisely, with 2 narrow nozzles of 6 × 60 mm and 6 × 75 mm.
• Sets the hairstyle with the cool air button or the fixed cool air position.

How to use it at home

1. Towel-dry your hair and apply a heat protectant to the lengths.
2. Dry the roots without a nozzle, on a medium setting, until the hair is almost dry.
3. Attach the 6 × 60 mm or 6 × 75 mm nozzle and work on sections held with clips.
4. Smooth each section with a round brush and direct the air from the roots to the ends.
5. At the end, set the shape with cool air for a few seconds on each section.
6. Unplug the dryer and clean the removable filter on the back.

For what type of hair

BaByliss PRO recommends it for all hair types. The 6 settings allow you to use it gently on fine hair and at high power on thick hair. If you have very dense and very long hair, Excess HQ, at 2600 W, is the more powerful option from the same family.

Specifications

What else you need

• BaByliss PRO BABD11E Diffuser, compatible with Caruso HQ
• Olivia Garden Ceramic+Ion SpeedXL 55 Round Brush, for blowouts
• L’Oréal Professionnel Flex Blowdry Leave-in Cream, with heat protection
• Hair sectioning clips

ProBeauty Tip. Use the 6 × 60 mm nozzle when you want straight and shiny hair; the narrower jet gives you more tension on the section.

The BaByliss PRO Ultra Curl is a 25 mm hair straightener designed especially for curls: you make them with one hand, in a single movement. The EP Technology 5.0 floating plates smooth the strand, while the curved side plates give it a curl shape. You can also use it to straighten hair.

What it does for you

• It makes curls in a single movement, with one hand, without wrapping the hair.
• It smooths and curls at the same time: the strand slides between the plates, while the curved edges fix its shape.
• It presses evenly on the entire strand, because the floating plates compensate for thickness differences.
• It shows you when it's ready: the light flashes until it reaches the selected temperature.
• It is held securely in the hand, with tips that remain cool and support for the thumb.
• It turns off automatically if you do not use it for approximately 72 minutes.

How to use it at home

1. Start with clean, dry hair. Take a strand of at most 3.5 cm: the thinner it is, the more defined the curl will be.
2. Push the sliding button once for 170 °C or further for 200 or 230 °C. Wait until the light stops flashing.
3. Grip the strand at the root, with the curved plates facing the head, and close the plate.
4. Rotate the plate 90°, with the curved plates facing up.
5. Slowly move down towards the ends, rotating outwards, until the curved plates reach the bottom. Release the strand.
6. Twist the end of the curl 180° in its direction, so it settles. Finally, turn off the plate and let it cool.

For what type of hair

The manual recommends 170 °C for delicate and fine hair and 200 °C for medium hair, both for curls. The 230 °C setting is only for thick, curly, or afro hair, which must be straightened first. If you only want straight hair on fine hair, a plate with lower settings is more suitable.

Specifications

What else you need

• Wella EIMI Thermal Image Heat Protection Spray
• Schwarzkopf Session Label The Coat Heat Protection Spray
• Clips for holding hair in sections
• BaByliss PRO Flat Brush
• Osis+ Elastic Flexible Hairspray, for curls that last

ProBeauty Tip. The manual also describes a second method: rotate the plate inwards, not outwards. Try both on one strand each and keep the one that suits you more naturally.

The BaByliss PRO High Performance Curling Tong is the new range of BaByliss PRO curling tongs, available from us in diameters from 13 to 38 mm. The barrel has a non-stick black oxide coating, which allows the hair to release easily and adds shine. Choose the diameter according to the curl you want: small for tight curls, large for loose curls and soft waves.

What it does for you

• Ready in 25 seconds and quickly recovers its temperature between sections.
• Heats the entire barrel evenly along its entire 160 mm length, so the curl comes out the same from root to tip.
• Releases the hair easily: the black oxide barrel and ceramic clamp slide smoothly and add shine.
• Tires your thumb less thanks to the spring lever.
• Remembers the setting: starts at the last temperature used, from the 5 levels between 140 and 200 °C.
• Turns off automatically after 20 minutes.

How to use it at home

1. Start with clean and completely dry hair. Apply heat protection to the lengths.
2. Turn on the device and choose one of the 5 levels. For fine or colored hair, start at 140 °C and only increase if the curl does not hold.
3. Divide the hair into sections and secure the rest with clips.
4. Press the lever, secure the end of the section between the clamp and the barrel and roll towards the root. Hold for a few seconds, then release.
5. Let the curls cool, then release them with your fingers. Between sections, place the device on the integrated stand.

For what type of hair

The brand recommends it for any hair length. The diameter makes the difference: 13 mm gives tight curls and texture, 16–19 mm classic curls, 25 mm defined curls, and 32–38 mm large curls and loose waves. If you have very short hair, the large diameters do not have enough hair to roll.

Specifications

What else you need

• Wella EIMI Thermal Image Heat Protection Spray
• Schwarzkopf Fibre Clinix Fibre Sealer Anti-Frizz Heat Protection
• Hair Sectioning Clips
• Schwarzkopf Silhouette Hairspray, for curls that last all day
• Olivia Garden Fingerbrush Curved Brush

ProBeauty Tip. For curls that last, after releasing the curl, roll it in your palm for a few seconds until it cools. Only then let it down.

The BaByliss PRO FX3 M4394E Bag is a double-foil BaByliss PRO FX3 shaver carrying case. It keeps your shaver in one place, protected from bumps and dust, when you take it with you or put it aside. It is a storage accessory: it does not charge or clean the shaver.

What it does for you

• The foil stays protected from bumps and scratches in your backpack or drawer.
• The shaver does not collect dust between uses.
• You can easily take it with you to clients' homes or on trips.
• The workstation stays tidy, with the shaver in its place.

How to use it at home

1. After shaving, turn off the shaver and clean the foil of hair with the brush.
2. Put the protective cap on the foil, if the shaver has one.
3. Place the shaver in the bag only when it is dry and clean.
4. Close the bag and keep it in a dry place.
5. Remove the shaver from the bag before charging it.

For what type of shaver

For the BaByliss PRO FX3 double-foil shaver, according to the product name. We cannot confirm compatibility with other shavers; if you want to use it with another model, write us the model code before ordering.

What else you need

• BaByliss PRO FX3 double-foil shaver
• FXX3RFBE foil and blade replacement set for FX3
• BaByliss PRO 4-in-1 blade spray

ProBeauty tip. Put a small silica gel packet in the bag if you keep it in the bathroom or in the car. Moisture damages the foil faster than use.

BaByliss PRO SkeletonFX FX707ZE is the replacement blade for SkeletonFX FX7870 trimmers. It features a 40 mm T-blade with 1.6 mm standard teeth for clean lines on any hair texture. You can install it with a screwdriver in just a few minutes when the old blade no longer cuts cleanly.

What it does for you

• Cleanly trims lines, details, and shapes thanks to the 40 mm T-blade designed for precision work.
• Adjusts to a zero-gap setting, so you can work very close to the skin.
• Combines two materials: the fixed blade is made of titanium, while the moving cutting blade has a DLC coating.
• Works on any hair texture and skin sensitivity, according to the brand, thanks to the standard teeth.
• Fits multiple devices: FX797E, all FX7870 and FX726 models, plus 2-hole blade systems.

How to use it at home

1. Turn off the device and unplug it.
2. Turn it upside down with the blade teeth facing down and place it on a flat surface.
3. Loosen the mounting screws with a screwdriver and remove the old blade set.
4. Place the new set on the head, aligning the pivot pin with the moving blade.
5. Put the screws back in place, tighten them lightly, turn the device over, and align the blades parallel to the housing. Only then tighten them completely.
6. Apply a few drops of lubricating oil before turning on the device.

For what type of device

It fits SkeletonFX FX7870 trimmers, including the GunSteel, Gold, and Boost+ versions, as well as the SnapFX FX797E and LO-PROFX FX726. The brand says it also works with other devices featuring a 2-hole blade system. It is not for FX8700 clippers, which use 45 mm blades.

Specifications

What else you need

• BaByliss PRO 4-in-1 Blade Care Spray
• Wahl Blade Oil, 100 ml
• BaByliss PRO SkeletonFX GunSteel FX7870GSE Trimmer
• BaByliss PRO SkeletonFX Gold FX7870GE Trimmer
• Wahl Blade Ice Spray for cooling and cleaning blades

ProBeauty tip. After installation, turn on the device for a few seconds and look at the blade from the side. If the moving blade extends beyond the fixed blade, loosen the screws and realign it before it touches the skin.

BaByliss PRO Advanced Curl 32 mm is a curling iron with an extra-long barrel and large diameter, for loose curls and waves in long hair. The barrel is made of Titanium Diamond, and the temperature goes up to 220 °C. It is a salon-quality device, but its clear settings make it easy to use at home.

What it does for you

• It creates large curls and waves, thanks to the 32 mm diameter.
• It covers a lot of hair in a single pass, because the barrel is extra long.
• It withstands daily use: the titanium with diamond powder withstands high temperatures and salon wear and tear.
• It protects fine hair, because you can start at 135 °C, and holds a curl in very thick hair at 220 °C.
• It tells you when it is ready: the light indicator flashes until the set temperature is reached.
• It comes with everything you need: a heat mat and styling glove, plus a cool tip and integrated supports.

How to use it at home

1. Wash and dry your hair thoroughly. Apply heat protection to the lengths and ends.
2. Turn on the device, choose the temperature from the 30 settings, and wait for the indicator to stop flashing.
3. Put on the heat glove. Divide your hair into wide sections and secure them with clips.
4. Wrap each section around the barrel, away from the scalp, hold for a few seconds, and release.
5. Let the curls cool, then brush them gently if you want softer waves.
6. When you are finished, turn it off and leave it on the heat mat until it cools down completely.

For what hair type

It is suitable for all hair types, from fine to very thick, because you can choose the temperature from 30 settings. The large diameter and long barrel work best on medium to long hair. For short hair or if you want tight curls, choose the 19 mm version.

Specifications

What else you need

• Schwarzkopf Session Label The Coat multi-protector spray
• L’Oréal Professionnel Pro Longer 10-in-1 cream, for long hair
• Hair sectioning clips
• Osis+ Elastic flexible hairspray
• BaByliss PRO flat brush with boar bristles, for brushed waves

ProBeauty tip. For Hollywood waves, curl all sections in the same direction. After they cool, brush them with a natural bristle brush until they blend into one continuous wave.

BaByliss PRO FoilFX02 FXRF2E is the replacement set for the FoilFX02 metal foil shaver. It contains a double foil shaving head and 2 blades, so you replace all the cutting parts at once. It is the simple choice when you want the shaver to once again shave cleanly on the neck, face, and contours.

What it does for you

• All the cutting parts in one package: double foil shaving head and 2 blades.
• Shaves very close to the skin on the neck, face, and around the hairline.
• 44 mm shaving area, just like the shaver's original head.
• Replaced in a few minutes, by pressing, each part locks with a click.
• Works with other FoilFX02 models too: the brand says it is interchangeable with any BaByliss PRO double foil shaver.

How to use it at home

1. Turn off the shaver (switch to OFF). Press the head release button on the side and pull the head up.
2. Remove the first worn blade: hold it by the two ends and pull it gently upwards. Then remove the second one.
3. Mount the new blades one by one. Align the guide of each with the drive shaft and press gently until you hear a click.
4. Place the new head over the blades and press gently until it locks with a click, without bending the foil.
5. Turn on the shaver and check that it works correctly.

For what type of shaver

The set is made for the FoilFX02 (FXFS2E) metal shaver. According to the BaByliss PRO page, it works with any BaByliss PRO double foil shaver. It is not for FoilFX01 or UVFOIL01, which have single foil, nor for UVFOIL02, which only accepts the FXLRF2E set.

Specifications

What else you need

• BaByliss PRO FoilFX02 metal shaver, for which the set is made
• BaByliss PRO 4-in-1 spray for shaver maintenance
• Wahl oil for blade lubrication
• Wahl Blade Ice spray for blade cleaning

ProBeauty tip. Write on the box the date you installed the set. The brand does not give a fixed interval, so you will notice yourself in how many months the cutting performance starts to decrease and know when to order the next one.

BaByliss PRO SkeletonFX 35078700 is a replacement blade sold for SkeletonFX FX7870 foil shavers. Code 35078700 is a spare part code, and the brand does not publish a separate data sheet for it. Therefore, check your device model before ordering.

What it does for you

• It brings back a clean cut when the old blade no longer catches the hair on the first pass or pulls the hair.
• It saves you a service visit: on the SkeletonFX, the blade set is attached with screws and you can replace it yourself.
• It keeps your device working: you only replace the worn blade, not the entire foil shaver.
• It is easy to maintain: the brand recommends a few drops of lubricating oil before each use.

How to use it at home

1. Turn off the device and unplug it.
2. Turn it upside down with the blade teeth facing down and place it on a flat surface.
3. Loosen the mounting screws with a screwdriver and remove the old blade set.
4. Place the new set on the head, with the foil axis aligned in the moving blade.
5. Put the screws back in place, tighten them slightly, align the blades parallel to the housing, and only then tighten them completely.
6. Put a few drops of oil on before turning on the device.

For what type of device

It is sold for SkeletonFX FX7870 foil shavers. I did not find a BaByliss PRO source linking code 35078700 to other models. If you have a SnapFX, LO-PROFX, or another device, choose a blade with brand-published compatibility, such as FX707ZE, which covers the entire FX7870 series, plus FX797E and FX726.

What else you need

• SkeletonFX FX707ZE blade, with brand-published compatibility
• BaByliss PRO 4-in-1 spray for blade maintenance
• Wahl oil for blade lubrication, 100 ml
• Wahl Blade Ice spray for cooling and cleaning blades

ProBeauty tip. Before ordering, look at the label under the device: if it says FX7870, you are on the right series. Keep the old blade until you check that the new one cuts cleanly.

✨ BabylissPro UV Double Foil Shaver – Innovation in professional shaving

Discover the BabylissPro UV Double Foil Shaver – a revolutionary shaving device that combines cutting-edge technology with a robust and elegant design. Created specifically for professional barbers, but also ideal for personal use, this device offers a superior shaving experience, impeccable hygiene, and extended autonomy.

🔧 Key features:

• Corded or cordless use – Up to 5.5 hours of autonomy for complete freedom of use.
• Double black titanium foil system (44 mm) – Ensures efficient, precise, and gentle shaving, even on sensitive skin.
• Integrated antibacterial UV technology – Eliminates up to 99.9% of bacteria for excellent hygiene, automatically activated when the cap is closed.
• Fast charging in just 3 hours – With standard and USB-C port, for maximum convenience in any situation.

✅ User advantages:

• Enhanced hygiene and guaranteed safety – The UV system protects skin health and keeps the shaving head clean after each use.
• Durability and style – The resistant metal casing and premium finish reflect the professional quality of the device.
• Portable and practical – Includes a protective pouch, perfect for safe transport and storage.

🔝 Choose BabylissPro UV Double Foil Shaver for a hygienic, comfortable, and high-performance shave!
📦 Available now on Probeauty.RO – invest in an innovative shaving device, created for lasting results and top-tier grooming.

The BaByliss PRO Rotating 800 is an 800 W hot air rotating brush with two interchangeable round heads, 40 and 50 mm. The brush rotates on its own in both directions, so you can create voluminous blowouts without having to hold a hairdryer and brush separately. It is designed for pre-dried hair, not for drying wet hair.

What it does for you

• Gives you root volume and curled ends with a single device: the hot air and rotation work together on each section.
• Suitable for several lengths: the 50 mm brush is for long hair, while the 40 mm one is for short layers and bangs.
• You choose the curl direction: the two-way rotation curls the ends inward or outward.
• Reduces frizz and static thanks to ionic technology.
• Grips the hair well, with boar and nylon bristles and epoxy-coated tips, on a ceramic-technology barrel.
• Set the style with cool air, and the rear filter opens on a hinge so you can easily clean it.

How to use it at home

1. After washing, towel-dry your hair and detangle it thoroughly. Use the brush on pre-dried, slightly damp, and completely detangled hair.
2. Attach the appropriate brush head to the device body and lock it with the button on the brush.
3. Section your hair with clips and start with the bottom sections, no wider than 2 cm.
4. Hold the section at a 90° angle to the brush. With the device on heat but without rotation, pass through it once or twice to straighten it.
5. Press the button in the desired direction and glide the brush from the roots to the ends. At the end, roll the entire section around the brush and hold for a few seconds to lift the roots.
6. Finish with a cool air jet, without rotation, so the style lasts longer.

For what hair type

It works on all hair types, from short cuts with bangs to long hair. The manual says to repeat the passes depending on the hair type, so you will need more for thick hair. It is not a solution for completely drying wet hair: in that case, you need a hairdryer first.

Specifications

What else you need

• L’Oréal Tecni.Art Flex Blowdry leave-in cream, with heat protection for blowouts
• Wella EIMI Thermal Image heat protection spray
• Olivia Garden iDetangle brush, before blowouts
• Hair sectioning clips
• 50 mm replacement brush for Rotating 800

ProBeauty tip. Occasionally rinse only the brush head under running water to remove trapped hair and product residue. Only put it back on after it has completely dried.

The BaByliss PRO Triple Barrel Waver is a three-barrel waver with 22, 19, and 22 mm barrels for creating S-shaped waves. It makes it easy to achieve beach waves or glamorous ’50s waves. The barrels feature a Titanium-Tourmaline coating, and you can choose from 5 temperature settings, from 140 to 220 °C.

What it does for you

• Creates S-shaped waves quickly: clamp the three barrels onto a section of hair, and the wave is formed with a single press.
• Distributes heat evenly and consistently thanks to the Titanium-Tourmaline coating, which protects the hair fiber.
• Choose the temperature for your hair using the temperature dial: 140, 160, 180, 200, or 220 °C.
• Work safely: cool tip, integrated stand, and locking system for storage.
• Shuts off automatically after approximately 72 minutes of inactivity.

How to use it at home

1. Start with clean, completely dry hair and apply heat protection to the lengths.
2. Open the device by sliding the locking button to UNLOCK, then plug it in.
3. Choose the temperature using the dial and press the 0/I button. The indicator light remains on while you work.
4. Put on protective gloves. Take a section of hair and place the device near the roots, but not against the scalp.
5. Clamp the barrels onto the section for a few seconds. Then move the device down without catching the already waved section, and continue to the ends.
6. Let the hair cool completely before touching it. When finished, press 0/I and, once cooled, slide the button to LOCK.

For what hair type

Suitable for all hair types. The BaByliss PRO guide: 140 °C for damaged, colored, or fine hair; 160 °C for normal hair; 180 °C for thick hair; 200 °C for very curly hair; and 220 °C for afro hair. On very short hair, the three barrels are not long enough to form the wave.

Specifications

What else you need

• Wella EIMI Thermal Image Heat Protection Spray
• L’Oréal Tecni.Art Flex Blowdry Leave-In Cream with Heat Protection
• Hair Sectioning Clips
• Wella EIMI Mistify Me Light Light-Hold Hairspray for Natural Waves
• Olivia Garden Fingerbrush Curved Brush

ProBeauty Tip. For a beach effect, leave 2–3 cm straight at the ends. The waves will look more natural and relaxed than if you wave the section all the way to the ends.

Babyliss Pro 4-in-1 Spray for Hair Clipper Maintenance

Babyliss Pro 4-in-1 Spray was specially designed for the protection and maintenance of hair clippers and trimmers. It has a multi-action formula that extends the life of your clippers. This innovative spray is recommended for use before, during, and after using hair clippers.

Benefits:

-Lubricates

-Cleans

-Protects

-Cools the blades

How to use: Spray before, during, and after use on and between the clipper blades from a distance of 5-10cm. Leave the clipper running for 10-15 seconds for proper lubrication.

Restore your shaver's maximum performance with the complete BabylissPro FXLRF2 replacement kit, exclusively compatible with the Double FoilFX02 UV model. Made in the USA, this professional set is ideal for periodic maintenance, offering a precise, comfortable, and safe shave.

🔧 Kit contents:

• Titanium foil – for a smooth, irritation-free shave
• Ultra-efficient cutting blade – durable and powerful
• FXLRF2 compatible replacement head – perfectly adapted to the device

✅ Compatibility:

• Only with BabylissPro Double FoilFX02 UV (FXLRF2)
• Not compatible with other models or single foils

💎 Key advantages:

• Like-new performance with every use
• Quick and easy assembly, no special tools required
• Precise shave, without pulling or irritation
• Resistance and durability during intensive use
• Recommended for salons and professional use

🛠️ Quick usage instructions:

1. Press the side button to remove the old foil
2. Carefully install the new foil
3. Add a few drops of oil for maintenance
4. Test the device before use

🧼 Recommended maintenance:

• Clean the foil and blade with a special brush or professional spray
• Do not wash with water
• Allow the device to cool completely before storage

💡 Ideal for professionals who demand precision, hygiene, and maximum reliability every day.

The BaByliss PRO Stylist is a hair straightener made in Italy, with ultra-gliding 25 × 110 mm titanium plates, here in the black and silver version. It reaches 220 °C in 40 seconds and has a cool-touch housing, so you can easily get close to the roots. Use it for straight hair, waves, or curls.

What it does for you

• Ready to style in 40 seconds: the Advanced Ceramics system heats up twice as fast as other BaByliss PRO plates, according to the brand.
• Glides smoothly without pulling the hair: the titanium plates are ultra-gliding and conform to the hair strand.
• Reduces frizz with anti-frizz ionic technology.
• Remembers the last temperature, so you don't have to set it every time.
• Lets you work close to the roots: the housing stays cool, and the curved shape helps you create waves and curls.
• Shuts off automatically after 60 minutes.

How to use it at home

1. Start with clean, completely dry hair and apply heat protection to the lengths.
2. Turn on the straightener and choose one of the 5 digital settings, between 150 and 230 °C. For fine or color-treated hair, start at 150 °C.
3. Secure the top section of hair with clips and work on thin strands, from the nape of the neck upwards.
4. Gently pull the straightener from the roots to the ends in one continuous motion.
5. For waves, close the straightener around the strand, twist it half a turn, and slowly lower it.
6. Finally, turn off the straightener, let it cool down, and put the silicone plate protectors on before putting it in the case.

For what hair type

It works on all hair types, from fine to thick, because you can choose the temperature between 150 and 230 °C. The 25 mm plates work precisely at the roots and quite quickly on the lengths. It has universal voltage, so you can take it with you on trips outside Europe.

Specifications

What else you need

• Kérastase Chroma Absolu heat protection serum, for color-treated hair
• Wella EIMI Thermal Image heat protection spray
• Hair sectioning clips
• BaByliss PRO flat brush

ProBeauty tip. Since it remembers the last setting, check the temperature before you start if someone else in the house uses the straightener. A setting left at 230 °C is not suitable for fine or bleached hair.

The BaByliss PRO Dial-a-Heat 19 mm is a classic curling iron with a clip and a Titanium-Tourmaline coated barrel. Its small diameter gives you defined, clearly shaped curls that you can wear as they are or loosen into waves. You can choose the temperature from a 30-step selector, from 130 to 200 °C.

What it does for you

• Creates small, defined curls thanks to its 19 mm diameter.
• Heats evenly and consistently with its highly durable Titanium-Tourmaline coating.
• Heats up very quickly and is ready to use in no time.
• Lets you choose the exact temperature: linear control with 30 settings, from 130 to 200 °C.
• Holds the hair section firmly with its lever clip, while the cool tip helps you guide the iron.
• Switches off automatically after approximately 72 minutes of inactivity.

How to use it at home

1. Start with clean, completely dry hair. Apply heat protectant to the lengths.
2. Turn on the iron and select the temperature. The indicator light flashes until the selected temperature is reached.
3. Work on thin 2–3 cm sections, securing each one with a clip.
4. Place the clip over the section for an inward curl, or underneath for an outward curl.
5. Roll the section toward the roots without touching the scalp, hold for a few seconds, then open the clip and release the curl.
6. Let the curls cool. Between sections, rest the iron on the built-in metal stand.

For what hair type

It works on all hair types, from fine and fragile to very thick, with the right temperature. The small diameter is ideal for short and medium-length hair, where a large barrel would have nothing to curl. If you want large waves in long hair, choose the 32 mm Dial-a-Heat.

Specifications

What else you need

• L’Oréal Professionnel Pro Longer 10-in-1 Cream with heat protection
• ETB Hair Stylesse Shield Smooth heat protection spray
• Schwarzkopf Professional sectioning clips
• Wella EIMI Boost Bounce Mousse for defined curls
• Olivia Garden Fingerbrush curved hairbrush

ProBeauty tip. For a natural curl effect rather than a doll-like look, curl only from mid-length down. Leave the roots loose, and the curls will look more modern.

The BaBylissPRO Dial-a-Heat Crimping Iron 60 mm is a crimping iron with wide 60 mm EP Technology 5.0 plates. It creates a well-defined crimped pattern that provides long-lasting volume and texture. The large plates cover a lot of hair in one pass, making it especially useful for long hair.

What it does for you

• Gives you long-lasting volume and texture with a well-defined crimped pattern.
• Works faster on long hair: the 60 mm plates take in wide sections, even on very long hair.
• Crimps evenly across the entire section because the EP Technology 5.0 plates distribute heat evenly over the entire surface.
• Choose the heat setting for your hair, with 5 settings between 120 and 200°C.
• Ready to use immediately: the Advanced Heat Management element heats up quickly and maintains a stable temperature.

How to use it at home

1. Start with clean, completely dry, and detangled hair. Apply heat protection to the lengths.
2. Turn on the iron and choose a setting: a low one for fine or fragile hair, or a higher one for thick hair.
3. Take a section as wide as the plates and place the iron near the roots, without touching the scalp.
4. Close the plates, press gently for a few seconds, then open them.
5. Move the iron down the same section, immediately below the already crimped part, and repeat until you reach the ends.
6. Let the hair cool completely before touching or styling it.

For what hair type

The brand recommends it for all hair types, from the most fragile to the hardest to style, because you can choose the temperature. The 60 mm plates are designed for long and very long hair. For medium-length hair or for accenting a few sections, the 38 mm crimping iron is easier to handle.

Specifications

What else you need

• L’Oréal Professionnel Pro Longer 10-in-1 Heat Protection Cream
• ETB Hair Stylesse Shield Smooth Heat Protection Spray
• Schwarzkopf Professional Sectioning Clips
• Osis+ Soft Dust Volume Powder
• Wella EIMI Mistify Me Light Light-Hold Hairspray

ProBeauty Tip. For subtle volume, crimp only the roots of the sections underneath the top layer and leave the top hair smooth. The texture holds the volume without being visible.

BaByliss PRO SkeletonFX FX707BD2E is a 40 mm T-blade replacement blade with 2 mm deep teeth and a black DLC coating. Use it with SkeletonFX FX7870, SnapFX FX797E, and LO-PROFX FX726 trimmers. It is designed for clean lines and detailing on thick hair.

What it does for you

• Creates clean outlines and sharp lines thanks to its 2 mm deep teeth.
• Cuts through thick or coarse hair where fine-tooth blades can easily clog.
• Glides more easily: the DLC (Diamond Like Carbon) coating is wear-resistant and reduces friction.
• Adjusts to zero-gap for trimming very close to the skin.
• Fits multiple devices: FX797E, all FX7870 and FX726 models, plus 2-hole blade systems.

How to use it at home

1. Turn off the trimmer.
2. Remove the old blade with a screwdriver.
3. Place the new blade on the trimmer and make sure it is correctly positioned, parallel to the housing.
4. Tighten the screws and turn on the trimmer for a few seconds to ensure the blade runs smoothly.
5. Clean and lubricate the blade regularly, before and during use, with BaByliss PRO 4-in-1 spray, as recommended by the brand.

For which type of device

It fits SkeletonFX FX7870, SnapFX FX797E, and LO-PROFX FX726 trimmers, plus other devices with a 2-hole blade system. The brand recommends it for thick or coarse hair and less sensitive skin. If you frequently work on sensitive skin, a blade with standard 1.6 mm teeth, such as the FX707ZE, is more suitable.

Specifications

What else you need

• BaByliss PRO Boost+ SkeletonFX Gold FX7870GBPE Trimmer
• BaByliss PRO SkeletonFX GunSteel FX7870GSE Trimmer
• BaByliss PRO 4-in-1 Blade Care Spray
• Wahl Blade Lubricating Oil, 100 ml

ProBeauty tip. Use this blade for outlining and detailing, and on areas with thin skin, such as the neck, work with short strokes and without applying pressure.

The BaByliss PRO Air Styler 32 mm is a 700 W hot air brush with a Titanium-Tourmaline coated barrel. It lets you finish drying pre-dried hair while styling it: smoothing, adding volume, or creating loose waves. The brush does not rotate; you guide it yourself, from roots to ends.

What it does for you

• Finish drying and styling in one pass: the hot air heats the brush barrel, and the heat is distributed evenly along the strand.
• Protect your hair at the end: with 2 heat and speed settings, you can lower the temperature as the hair dries.
• Volume and curled ends on medium and long hair, thanks to the 32 mm diameter.
• Glides easily through the hair, with flexible bristles and epoxy-coated tips.
• Grip the end of the brush without burning yourself: the tip has an insulated end that stays cool.
• Move freely, with the 2.70 m swivel cord.

How to use it at home

1. After washing, thoroughly detangle the hair and pre-dry it with a hairdryer until it is barely damp.
2. Turn the brush on setting II (strong airflow) or I (medium airflow). Setting 0 means off.
3. Divide the hair into sections and secure them with clips. Start with the bottom sections, no more than 2 cm thick.
4. Always work from roots to ends and let the brush glide slowly along the strand.
5. For volume, lift the strand at the roots, wrap the ends around the brush, and hold for a few seconds.
6. When the hair is almost dry, switch to setting I to finish with less heat.

For what hair type

The 32 mm diameter is most useful for hair from the chin down to the shoulders and beyond: it gives volume at the roots, curled ends, and soft waves. For very short hair or a bob, the 19 mm version grips the strands better. Do not use it on wet hair instead of a hairdryer.

Specifications

What else you need

• L’Oréal Tecni.Art Flex Blowdry leave-in cream with heat protection for blow-drying
• ETB Hair Stylesse Shield Smooth heat protection spray
• ETB Hair detangling brush, before styling
• Hair sectioning clips
• Osis+ Elastic flexible hairspray for long-lasting volume

ProBeauty tip. Do not skip pre-drying: the Air Styler is designed to finish drying, not start it. With barely damp hair, a single pass along the strand gives you both shape and volume.

BaByliss PRO The Straightener Hair Straightener

Experience the power and efficiency of the professional BaByliss PRO The Straightener, designed to achieve straight, smooth, and shiny hair, while maintaining its health and beauty.

Equipped with ultra-smooth EP TECHNOLOGY 5.0 plates, this straightener allows for effortless gliding. Advanced Ionic Technology eliminates frizz and static electricity, giving your hair a silky and shiny appearance.

Features

• Plate Dimensions: 28mm x 110mm, EP TECHNOLOGY 5.0
• Ionic Technology: For smooth and shiny hair
• Advanced Heat Management System™️: For fast heating and precise temperature control
• Temperature Selector: With 5 settings (150°C – 170°C – 190°C – 210°C – 230°C)
• On/Off Button and Digital Display: For simple operation and precise control
• Professional Swivel Cord: 2.70m for maximum freedom of movement

Advanced Functions

• Advanced Heat Management: For instant heating and precise temperature control
• 28mm Plates: For treating large sections of hair
• Temperature Adjustment: From 150°C to 230°C, suitable for all hair types
• Advanced Ionic Technology: Eliminates frizz and static electricity for perfectly smooth hair

Safety and Comfort

• Digital Temperature Display: For precise and simple control
• Resistant Insulating Material: For maximum comfort during use

Transform your hair care routine with BaByliss PRO The Straightener and enjoy straight, shiny, and healthy hair, achieved quickly and professionally right at home or in the salon.

Shaver Babyliss Pro FXONE ALL-METAL DOUBLE FOIL – Premium Technology for an Impeccable Shave

Discover the Babyliss Pro FXONE ALL-METAL DOUBLE FOIL, a professional shaver designed to provide a smooth, precise, and comfortable shave. Ideal for professionals and personal use, this device redefines performance standards through advanced technology and ergonomic design. With remarkable battery life and premium features, it transforms your daily routine into a luxury experience.

Technical Specifications

• N1 Digital Motor: Brushless motor with a speed of 10,000 RPM, offering high efficiency and durability.
• Interchangeable Lithium-Ion Battery: Provides up to 4 hours of continuous use with a charging time of just 2 hours.
• Gold-Plated Titanium Foils: Ensure a gentle touch and an irritation-free shave.
• Opposing Dual Blades: Precise and uniform cutting for all types of facial hair.
• Locking Pivot Head: Adapts to facial contours for superior precision.
• Lightweight: Only 320 g, ideal for prolonged use without fatigue.
• 4-Stage LED Indicator: For accurate battery level monitoring.

Package Contents

• Babyliss Pro FXONE Shaver.
• Interchangeable FXONE Battery.
• Universal Multi-Voltage Charging Base.
• Cleaning Brush for maintenance.
• USB-C Port for fast charging.

Benefits:

1. High Performance: The digital motor and titanium foils provide a smooth and comfortable shave.
2. Superior Durability: Resistant metal casing and advanced blade technology for long-term use.
3. Extended Battery Life: Perfect for long shaving sessions, with the option to quickly change the battery to avoid interruptions.
4. Ergonomic Design: The textured metal grip ensures comfort and enhanced control.
5. Universal Compatibility: The interchangeable battery system works with other products in the FXONE series.

Experience high-performance shaving and comfort with the Babyliss Pro FXONE ALL-METAL DOUBLE FOIL – the ideal solution for an impeccable look every day!

The BaByliss PRO BABD11E is the dedicated diffuser for the Excess HQ and Caruso HQ hair dryers, also compatible with the Levante and Veneziano HQ. Use it when you want to dry and style curly or wavy hair without disrupting the curls. It distributes heat evenly for fast yet gentle drying.

What it does for you

• Preserves your defined curls: the air is dispersed rather than coming out in a jet that disrupts them.
• Adds volume if you gently lift the hair away from the scalp with the diffuser.
• Dries evenly by distributing heat over a large surface area.
• Designed for specific models, according to the brand's published compatibility list, so you don't have to guess.

How to use it at home

1. Turn off the hair dryer and remove the concentrator nozzle.
2. Attach the diffuser to the end of the hair dryer until it is securely in place.
3. Apply a curl-defining and heat-protective foam to damp hair.
4. Turn on the hair dryer on a low speed and medium heat setting.
5. Place the lengths of hair into the diffuser, slowly bring it close to the scalp, and hold it for a few seconds. Then move it to another section.
6. Finally, press the cool air button to set the curls.

Which devices is it compatible with?

The brand lists it as compatible with the Excess HQ (BAB6990IE), Caruso HQ (BAB6970IE), Veneziano HQ (BAB6960IE), Levante, and Black Star Ionic (BAB6250IE). On the previous European website, BaByliss PRO also listed it for the older Caruso (BAB6510IE). For the Vulcano HQ, Stellato, and Rapido, the brand recommends a different diffuser, the BABD12E.

What else you need

• Compatible BaByliss PRO Excess HQ hair dryer
• Compatible BaByliss PRO Caruso HQ hair dryer
• Compatible BaByliss PRO Levante hair dryer
• Wella EIMI Boost Bounce curl-defining foam

ProBeauty tip. Dry your hair with the diffuser until it is almost dry, then let the last few minutes air-dry. The curls will remain more defined and with less frizz.

Impeccable organization and excellent mobility for beauty professionals. The BabylissPRO Boost+ Organizer is the professional bag specially designed for hairstylists and barbers who need an efficient, well-structured, and easy-to-transport workspace. Made from durable materials and finished with a modern design, the bag allows for the safe storage and transport of essential tools, from clippers and trimmers, to brushes, combs, scissors, or accessories.

Key Features

• Compact dimensions – 30 × 10 × 12 cm
  Small enough to save space, but surprisingly spacious for everyday equipment.

• Durable and textured material
  Offers enhanced protection for tools, excellent resistance to wear and tear in the salon and during travel.

• Smart compartmentalization
  Includes a generous main compartment and a side compartment for quick access to frequently used tools.

• Modern black and gold design
  The elegant style perfectly complements the professional aesthetic of the BabylissPRO brand.

The BabylissPRO Boost+ Organizer is an essential accessory for salons, barbershops, or specialists who work on the go. Ensure your tools are always protected, well-organized, and within reach, in a compact, practical, and premium bag.

The BaByliss PRO NB2E is a large flat brush with rounded tips, designed for shoulder-length hair and longer. Use it for everyday detangling and straight brushing when you want smooth, sleek hair. The rubber handle with a textured matte finish won't slip from your hand.

What it does for you

• Quickly detangles long hair: the wide surface covers a lot with every pass.
• Doesn't scratch the scalp, as the bristles have rounded, ball-like tips.
• Straight, smooth brushing, as explicitly recommended by the brand.
• Helps you straighten your hair, before or after drying.
• Stays firmly in your hand thanks to the non-slip rubber handle.

How to use it at home

1. To detangle, hold the hair at mid-length and brush the ends first. Then gradually work your way up to the roots.
2. For brushing, pre-dry the hair until it is slightly damp and apply heat protection.
3. Divide the hair into wide sections that the brush can cover in one pass.
4. Place the brush underneath the section at the roots and pull it towards the ends with the dryer's airflow directed from top to bottom.
5. Finish with a pass of cool air over each section to keep the hair straight.

For what hair type

BaByliss PRO recommends it for shoulder-length to long hair, regardless of texture, if you want to wear it straight. On short hair, there isn't much to straighten over the wide surface; the narrower NB1E version is more convenient for that. It doesn't create volume at the roots or curls.

Specifications

What else you need

• BaByliss PRO Vero Hair Dryer
• Osis+ Flatliner Heat Protection Serum, for smoothing
• Wella SP Luxe Oil Hair Oil, for ends
• BaByliss PRO Flat Brush with Boar Bristles, for shine

ProBeauty tip. On long hair, detangle it with the NB2E before washing: knots come out much more easily on dry hair than on wet hair.

Discover the BabylissPro Curl Definer 38mm, the ideal professional curling iron for creating natural, long-lasting curls and waves, perfect for professional and personal use. Equipped with Titanium-Tourmaline technology, this device offers even heat distribution and remarkable thermal stability, ensuring shiny curls and protecting hair from damage.

Key Features:

• Advanced Titanium-Tourmaline technology – Distributes heat evenly to create long-lasting curls, while protecting the hair fiber.
• Strength and durability – The titanium coating provides extreme durability, making it suitable for professional use in busy salons.
• Optimal ergonomics – Easy to use, this curling iron is ideal for any user, whether for professional or personal use.

Benefits of BabylissPro Curl Definer 38mm:

• Natural and long-lasting curls – Creates uniform and shiny curls, with a natural look and long-lasting hold.
• Professional performance at home – Ensures excellent results even for personal use, bringing salon quality within everyone's reach.
• Reliability for daily hairstyles – Perfect for frequent use, maintaining performance without compromise.

Choose the BabylissPro Curl Definer 38mm for impressive, long-lasting, and perfectly shiny curls – the ideal solution for a flawless look every day!

BaByliss PRO Curl 32-19 mm is a tapered curling iron with a barrel that tapers from 32 to 19 mm. It is designed for loose curls, natural waves and modern, tousled looks. The barrel features Titanium-Tourmaline, and the temperature is linearly adjustable between 110 and 190 °C.

What it does for you

• It gives you natural waves or loose curls, depending on which part of the taper you use.
• It works smoothly and quickly thanks to the Titanium-Tourmaline barrel, which distributes heat evenly.
• It protects your hair and adds shine without exceeding 190 °C.
• You know when it is ready to use: 2 indicator lights flash until the temperature is reached.
• It is comfortable to hold, with a soft-touch rubber handle and cool tip.
• It comes with included protection: a heat mat and 2 gloves, plus an automatic shut-off after 72 minutes.

How to use it at home

1. Dry your hair thoroughly and apply heat protection to the lengths.
2. Turn on the curling iron and select the temperature. For fine or color-treated hair, stay at the lower end of the settings.
3. Put on the protective glove when the indicator lights stop flashing.
4. Wrap a section of hair around the barrel, placing the roots on the wider part and the ends towards the cool tip.
5. Hold for a few seconds, then remove the barrel from the curl.
6. Let the curls cool, then loosen them with your fingers for a tousled look.

For which hair type

It works on all hair types with the right temperature. The large diameter works best on medium-length and long hair, where waves have room to form. If you have short hair or want tighter curls, Curl 25-13 mm is more suitable.

Specifications

What else you need

• L’Oréal Tecni.Art Flex Blowdry leave-in cream with heat protection
• Wella EIMI Thermal Image heat protection spray
• Hair sectioning clips
• Osis+ Soft Dust volume powder for a tousled look
• BaByliss PRO flat brush with boar bristles

ProBeauty tip. For loose waves, leave the last 2–3 cm of the ends uncurled. On the 32-19 mm taper, straight ends instantly create a tousled, beachy look.

Restore your shaver's maximum performance with the BabylissPRO FXONE Black Professional Set, specially designed for the FX79FS2MBE model from the FXONE range. This complete kit includes a replacement head, blade, and double foil, providing ultra-precise cutting and a perfectly smooth shave.

✔ What the set includes:

• Complete replacement head – 100% metal construction for high durability
• Ultra-thin double foil – for a comfortable and efficient shave
• Ultra-efficient blade – ensures a clean cut, without pulling or irritation

🔧 Compatibility:
✅ Exclusively for BaBylissPRO FXONE Black FX79FS2MBE
❌ Not compatible with other FX range models or single-foil shavers

✨ Key advantages:

• Precise, fast, and effortless shaving
• Simple and quick installation, ideal for professional maintenance
• Elegant, black design, perfect for a modern salon look
• Superior quality – long-lasting durability and performance

💡 Maintenance tip:
Periodically clean the cutting head and foil. Replace them whenever you notice a drop in performance to maintain maximum efficiency.

🔧 BabylissPRO FXONE Black – The professional's choice for an uncompromising shave!

BaByliss PRO Hi-Def Waver is a waver iron with 19 mm curved barrels. It creates very large, deep, and smooth waves, giving a “mermaid waves” look that works best on medium and long hair. It features an ion generator and digital temperature control from 150 to 210 °C.

What it does for you

• Creates large, deep waves with excellent definition, thanks to the strongly curved barrels.
• Reduces frizz: the ion generator reduces static charge, leaving hair looking shiny and silky.
• Maintains a constant temperature: the ceramic heating element heats up immediately between sections.
• Heats up very quickly with the Advanced Heat Management system.
• Distributes heat evenly through the barrels’ Titanium-Tourmaline coating.

How to use it at home

1. Start with clean, dry hair. Apply a heat protectant spray to the lengths.
2. Turn on the device and set the temperature using the digital control. For fine or color-treated hair, stick to 150 °C.
3. Divide the hair into equal sections and comb through each section.
4. Place the waver on the section where you want the wave to begin, without touching the scalp. Close it and hold for a few seconds.
5. Move the device down the length of the section, without overlapping the already waved part, all the way to the ends.
6. Let the hair cool down, then set it with a little hairspray.

For which hair type

BaByliss PRO recommends it for all hair types. The effect is most noticeable on medium and long hair, where the wave has enough room to form completely. On short hair above the chin, there is not enough room for large waves to develop.

Specifications

What else you need

• Wella EIMI Thermal Image Heat Protectant Spray
• Schwarzkopf Fibre Clinix Fibre Sealer Anti-Frizz Heat Protection
• Schwarzkopf Professional Sectioning Clips
• Schwarzkopf Silhouette Hairspray for finishing
• ETB Hair Detangling Brush

ProBeauty tip. For beach-ready waves, apply the hairspray from a distance after the hair has completely cooled down. Then gently separate the waves with your fingers, not a brush.

BaByliss PRO Curl 25-13 mm is a tapered curling iron with a barrel that narrows from 25 to 13 mm. With the same device you can create tight curls, natural curls or delicate waves, depending on how you wrap the strand. The barrel has a Titanium-Tourmaline coating, and the temperature is linearly adjustable between 110 and 190 °C.

What it does for you

• It gives you natural curls, wider at the top and tighter at the ends, thanks to the tapered shape.
• Protects the hair and adds shine: the Titanium-Tourmaline coating distributes heat evenly.
• Heats up quickly, and the 2 indicator lights flash until it reaches the selected temperature.
• Fits comfortably in the hand: the handle is covered in soft rubber, and the tip remains cool.
• Comes ready to use, with a heat mat and 2 protective gloves in the box.
• Shuts off automatically after 72 minutes.

How to use it at home

1. Start with clean and completely dry hair. Apply heat protection.
2. Turn on the curling iron and select the temperature. For fine hair, stay in the lower range of the settings.
3. Wait until the indicators stop flashing. Put the glove on the hand you use to wrap the hair.
4. Take a thin strand and wrap it around the barrel, with the roots towards the thicker part and the ends towards the cool tip.
5. Hold for a few seconds, then pull the barrel out of the curl.
6. Let the curls cool, then run your fingers through them. Place the device on the mat after use.

For what type of hair

It works on all hair types, with the right temperature: lower for fine or dyed hair, higher for thick hair. The small diameter is also suitable for short or medium hair. If you want large waves on long hair, Curl 32-19 mm is more suitable.

Specifications

What else you need

• Wella EIMI Thermal Image Heat Protection Spray
• Nook Lisciolina Cream, with heat protection and anti-frizz effect
• ETB Hair Clips for holding hair
• Wella EIMI Boost Bounce Mousse, for defined curls
• Olivia Garden Fingerbrush Curved Hairbrush

ProBeauty tip. For a natural result, alternate the direction: one strand forward, the next backward. Tapered curls look airier and do not stick together.

The BaByliss PRO CB2E is a 32 mm ceramic round brush for blow-drying. Its medium diameter makes it ideal for bobs, layered cuts, and shoulder-length hair. The ceramic coating reduces frizz and allows the hair to glide smoothly over the brush.

What it does for you

• Turned-under, rounded ends: a 32 mm brush fully wraps medium-length hair.
• Root volume: lift the hair section up the brush right from the roots.
• Smooth, faster blow-drying: the ceramic coating evenly distributes the dryer’s heat.
• Less frizz and static, thanks to the anti-static ceramic coating, which allows the hair to glide with less friction.
• Grips the hair without scratching the scalp: the curved bristles are gentle on the scalp.
• Won’t slip from your hand, thanks to the non-slip rubber handle.

How to use it at home

1. Pre-dry the hair with a dryer until it is half-dry and apply heat protection.
2. Divide the hair into sections and secure them with clips. Start at the nape of the neck.
3. Place the brush under the hair section at the roots and lift it slightly to add volume.
4. Slowly pull the brush toward the ends, directing the dryer’s airflow from top to bottom along the hair section.
5. At the ends, turn the brush inward or outward and hold for a few seconds, then release the hair section.

For what hair type

It is suitable for all hair types, from short to medium lengths, from bobs to shoulder-length hair. On long, thick hair, 32 mm covers too little in one pass, and blow-drying takes a long time. For short hair and very short sections, a smaller diameter grips better.

Specifications

What else you need

• BaByliss PRO Levante Hair Dryer
• L’Oréal Tecni.Art Flex Blowdry leave-in cream with heat protection
• Hair sectioning clips
• 20 mm BaByliss PRO ceramic round brush for short hair

ProBeauty tip. On a bob, roll the ends inward and cool them on the brush with cool air for a few seconds before releasing the hair section. The rounded shape lasts until evening.

With BabylissPro Vulcano HQ 2400W, you get fast and efficient drying, with professional results, regardless of hair type. This high-performance dryer is equipped with a long-lasting motor and offers an impressive air speed of 166 km/h, making it ideal for intensive use in both salons and at home.

Key features:

• 2400W power and high-performance motor – Ensures efficient and long-lasting drying, with a drying rate of over 6g of water per minute.
• Ionic technology – Reduces frizz, leaving hair smooth, shiny, and easier to detangle.
• Versatile speed and temperature control – Customize drying to achieve ideal results on any hair type.
• Cool shot button – Sets the style for a long-lasting finish and a professional look.

Benefits of BabylissPro Vulcano HQ 2400W:

• Air speed of 166 km/h and pressure of 1438 Pa – Fast and efficient drying for optimal results.
• Ergonomic design and removable filter – Easy to handle and maintain, ideal for prolonged use.
• Professional accessories – Includes 6×60 mm and 6×75 mm concentrator nozzles for precise styling.

BaByliss PRO BABBCLNE101 is a 75 mm concentrator nozzle for hair dryers, listed for the Caruso and Excess models. It focuses the air into a narrow, wide jet that you can direct exactly at the section of hair on the brush. You need it if you have lost or broken the wide nozzle of the hair dryer.

What it does for you

• It focuses the air on a single section of hair without frizzing up the rest of your hair.
• You work faster on long hair: the 75 mm opening covers a wider section than narrow nozzles.
• It gives you a shinier blowout, because the air follows the direction of the hair.
• It replaces the lost nozzle, so you have a complete set of tools again.

How to use it at home

1. Turn off the hair dryer and let it cool down if you have just used it.
2. Place the nozzle on the end of the hair dryer and push it gently until it is firmly in place. Do not force it.
3. Dry the roots without the nozzle, then attach the nozzle for blow-drying.
4. Hold the nozzle parallel to the brush and move the air from the roots to the ends, section by section.
5. Remove the nozzle only after it has cooled down and wipe it clean of dust before putting it aside.

For what type of device

It is listed for the BaByliss PRO Caruso and Excess hair dryers. The brand confirms that both Caruso HQ (BAB6970IE) and Excess HQ (BAB6990IE) come with a 75 mm nozzle from the factory, but does not publish a compatibility sheet for the BABBCLNE101 code. If you have another model or are not sure, write us the code on the handle of the hair dryer before ordering.

What else you need

• The BaByliss PRO Excess HQ hair dryer, which comes with a 75 mm nozzle
• The BaByliss PRO Caruso HQ hair dryer, which comes with a 75 mm nozzle
• Olivia Garden Ceramic+Ion SpeedXL 55 round brush, for blow-drying
• Wella EIMI Thermal Image heat protection spray

The ProBeauty tip. Use the 75 mm nozzle on long lengths and switch to a narrower one for small areas, the French braid, and the temples.

The BaByliss PRO Air Styler 19 mm is a 700 W hot air brush with a slim Titanium-Tourmaline coated barrel. The small diameter grips short hair and bangs well and creates tighter curls than a thick barrel. The brush does not rotate: you guide it, and it finishes drying while styling.

What it does for you

• Small curls and defined waves: the 19 mm barrel tightly wraps the hair.
• Styles bangs and short hair, where a large brush has nothing to grip.
• Finish drying and styling at the same time: the hot air heats the barrel, and the heat is evenly distributed throughout the hair.
• Reduce the heat towards the end, with 2 heat and speed settings, to protect hair that has already dried.
• Does not snag the hair: the bristles are flexible, with epoxy-coated tips.
• Easy to hold, thanks to the ergonomic handle and insulated tip, which stays cool.

How to use it at home

1. Detangle the hair after washing and pre-dry it with a hairdryer until it is barely damp.
2. Choose setting I (medium airflow) for bangs and fine areas or II (strong airflow) for the rest. 0 means off.
3. Section the hair and start from underneath, with strands no thicker than 2 cm.
4. Slowly glide the brush from the roots to the ends.
5. For a curl, wrap the strand around the barrel, hold for a few seconds, and gently release.
6. On dry hair, you can use it only for touch-ups on a few strands.

For what hair type

It is suitable for short hair, bangs, and small curls on medium-length hair. On long and thick hair, it takes a long time to work with such a slim barrel; in that case, the 32 mm version will help you more. Do not use it as a hairdryer on wet hair.

Specifications

What else you need

• L’Oréal Tecni.Art Flex Blowdry leave-in cream, with heat protection
• Wella EIMI Thermal Image heat protection spray
• Hair clips
• Wella EIMI Mistify Me Light light-hold hairspray
• 32 mm Air Styler, for volume on longer hair

ProBeauty tip. For bangs, hold the brush above the strand and pull forward on setting I. The result is rounded and well-placed, without the effect of bangs stuck to the forehead.