BaBylissPRO - Hair Clippers

BaByliss PRO ChromFX is a hair clipper with an all-metal, chrome-plated body and 45 mm Japanese steel blade. It works corded or cordless and comes with a charging stand. It is suitable for classic haircuts, as well as fades and detailing.

What it does for you

• Cuts cleanly and smoothly with Japanese steel blades and a sharp angle.
• Maintains speed in long or thick hair with its high-torque brushless motor.
• Fine length transitions with a 5-position lever: 0.8 – 1.4 – 2 – 2.8 – 3.5 mm.
• Eight fixed lengths with guide combs of 1.5; 3; 4.8; 6; 10; 13; 16 and 19 mm.
• Approximately 120 minutes of cordless use after 3 hours of charging, with 30 minutes of charging providing about 30 minutes of run time.

How to use it at home

1. Before first use, charge it for 3 hours. The red LED flashes while charging and stays lit when the battery is full.
2. Place the clipper in the stand only with the switch set to 0.
3. Remove the blade guard, turn on the clipper and hold it at a 45° angle. Apply 2 drops of oil directly to the blades, let it run for a few seconds, then blot off the excess.
4. Turn off the clipper, attach the comb to the blade guard, and press down on the back until it clicks.
5. Moving the lever up shortens the cut; moving it down lengthens it.
6. Finally, remove the comb, clean the blade with the brush and oil it. The combs can be rinsed, but dry them thoroughly.

For what type of haircut

The brand recommends it for all hair types: traditional haircuts, fades and creative styles. With combs up to 19 mm, it covers short and medium haircuts. For very fine contour lines, you will also need a trimmer.

Specifications

What else you need

• BaByliss PRO 4-in-1 blade spray
• Wahl blade oil
• Replacement blade 35087000, Japanese steel, 45 mm
• Graphite Taper blade FX803BME, for FX8700
• Set of 8 FXPCGE combs, for FX8700
• Wahl haircutting cape

ProBeauty tip. If you do not cut your hair often, recharge it for 3 hours approximately every 3 months, as the manual states. This will preserve the battery's capacity.

Discover the Babyliss Pro FXONE All-Metal Clipper, a premium clipper designed for hairstyling professionals and those who desire quality grooming at home. With a sophisticated design and advanced technologies, this device offers impeccable precision, durability, and superior comfort. Ideal for quick, precise, and versatile haircuts, the FXONE redefines hair care standards.

Technical Information

• Interchangeable Lithium-ion Battery: Up to 2.5 hours of autonomy, with a fast 2-hour charging time.
• High-Performance N1 Digital Motor: Double ball bearings for constant speed and maximum efficiency.
• Titanium Gold Fade Blade (MIM): Ultra-thin blade with integrated oil reservoir for constant lubrication.
• All-Metal Housing: Durable and luxurious design.
• Comb Sizes: 8 premium combs (0.5 mm – 6 mm) for various lengths and styles.

Package Contents

• Babyliss Pro FXONE All-Metal Clipper
• 8 Premium Combs for lengths between 0.5 and 6 mm.
• Dual Voltage Charging Base.
• Cleaning Brush and Lubricating Oil for maintenance.
• Replacement Blade, Protective Cap, and Screwdriver.

Details:

Advanced Technology: The Babyliss Pro FXONE is equipped with an interchangeable lithium-ion battery, offering impressive autonomy and maximum flexibility. The N1 digital motor ensures constant operation, even through thick hair, guaranteeing precise and fast cutting. The Titanium Gold Fade Blade provides superior performance, with an oil reservoir for continuous lubrication, reducing wear and extending the device's lifespan.

Premium Design: The all-metal housing and the ergonomic handle with a metal barbell grip offer comfort and control during use. The tapered end with a hidden hook allows for easy storage and quick accessibility.

Choose the Babyliss Pro FXONE All-Metal Clipper For:

• Continuous Performance: Innovative interchangeable battery system for uninterrupted use.
  
• Maximum Precision: Ideal for fine details, clear contours, and sharp lines.
• Ergonomic Design: Easy to handle and comfortable, even during prolonged use.
  
• Excellent Compatibility: Compatible with other devices in the Babyliss Pro FX range.

Discover Babyliss Pro Boost+ 4Artists Professional Metal Chameleon Clipper!

Supreme Innovation in Professional Haircutting

Babyliss Pro Metal Chameleon Boost+ ushers in a new era in the world of professional haircuts, redefining performance and durability standards in the beauty industry. With a state-of-the-art digital motor and an astonishing speed of 6,800 RPM, this professional clipper is ideal for precise cuts and various styles.

Key Features:

• Unrivaled Durability: Built to withstand intensive use, the Babyliss Pro Metal Chameleon Boost+ is made to last.
• Easy Maneuverability: The ergonomic design and reduced weight ensure precise control and comfortable long-term use.
• Superior Performance: The powerful motor and high-precision blade allow for fast and accurate cutting, guaranteeing professional results.

Advanced Technical Details:

• 3300mAh Lithium-Ion Battery: Offers a fast charge of only 4 hours and a running time of up to 2 hours, saving time and providing maximum flexibility for professionals in the field.
• Dual Operating Mode: Corded or cordless use, ensuring you'll never be limited in your creativity.
• Elegant and Ergonomic Design: The Babyliss Boost+ Trimmer stands out for its elegance and a superior cutting experience.
• Powerful DC Motor: With a speed of 7,200 rpm, this machine becomes a reliable accessory for any professional.
• T-Wide Blade: Offers practical maneuverability for both professional and personal use.

Technical Specifications:

• Battery operating time: approx. 120 minutes
• Charging time: 180 minutes
• High-speed DC motor
• Anti-slip rubber surface
• Blade movement: 7,200 rpm
• Metal blade for perfect contouring
• Includes cleaning brush
• LED indicator for charge level
• Operating voltage: 100-240V / 50-60 Hz
• Device weight: 250 grams
• Packaged device weight: 840 grams
• Full metal casing

Purchase Babyliss Pro Boost+ 4Artists

Discover the power and precision of the Babyliss Pro Metal Chameleon Boost+ now and transform every haircut into a work of art. Perfection is just a click away!

BaByliss PRO FXONE Lo-Pro is a very low-profile hair clipper with a metal blade housing, part of the FXONE system with an interchangeable battery. It features a 45 mm MIM Fade Blue Titanium blade with an oil reservoir. It is designed for fades and short haircuts on hair of any texture.

What it does for you

• Fits comfortably in the hand: the metal blade housing has a very low profile, while the rounded, tapered handle provides a better grip.
• Less vibration and noise, achieved with an improved top housing.
• Cuts consistently with the brushless N1 digital motor, dual bearings, and 6800 RPM.
• Smooth fades with an ultra-thin MIM blade that is zero-gap adjustable and continuously lubricated from the reservoir.
• Up to 2.5 hours of runtime after 2 hours of charging, with a battery that can be changed with the push of a button.

How to use it at home

1. Charge the battery on the included charging base and check the level on the 4-step LED ring.
2. Apply a few drops of oil to the blade before cutting.
3. Attach the guide comb with the clipper turned off and select the length.
4. Use the 5-position lever to transition between combs.
5. For finishing without a comb, work with the blade exposed using short strokes.
6. Finally, clean the blade with the included brush and lubricate it.

For what type of haircuts

The brand recommends it for all hair textures. It is suitable for fades, short haircuts, and touch-ups. For clean detailing around the neck and beard, its companion is the Lo-Pro FXONE trimmer, which uses the same battery.

Specifications

What else you may need

• BaByliss PRO 4-in-1 blade spray
• Wahl blade oil
• FX8022BLE MIM Blue Titanium replacement blade, 45 mm
• FXONE FXBB33E spare battery
• Lo-Pro FXONE trimmer, same battery
• Wahl haircutting cape

ProBeauty tip. If you also get the Lo-Pro FXONE trimmer, buy an extra FXONE battery: you will always have one on the charging base, ready for either device.

BaByliss PRO 4Artists RoseFX is an all-metal clipper in a rose-gold shade, with an EDM Technology digital motor, lithium battery, and 45 mm Japanese steel blade. The brand designed it for hairdressers and barbers who want a reliable clipper with fast charging. It performs just as well for classic haircuts as for fades, edging, or hair tattoos.

What it does for you

• Clean, close-to-the-skin fades with the 45 mm Wedge flat blade, featuring a very sharp V-shaped cutting angle.
• Equal power corded or cordless with the electronically controlled high-torque digital motor.
• Smooth transitions between lengths with 5-step adjustment: 0.8 – 1.4 – 2 – 2.8 – 3.5 mm.
• Eight fixed lengths with guide combs of 1.5; 3; 4.8; 6; 10; 13; 16 and 19 mm.
• Two hours of continuous use after a full 3-hour charge.
• Secure grip in the hand thanks to the textured, non-slip handle.

How to use it at home

1. Charge it fully on the stand before first use.
2. Spray the FX4in1 spray on the blades before cutting, as recommended by the brand.
3. With the clipper turned off, attach the comb corresponding to the desired length.
4. Cut against the direction of hair growth and use the lever for transitions between lengths.
5. For fades, remove the comb and work with the free blade using short strokes.
6. Finally, clean the blade with the brush and reapply the spray.

For what type of haircuts

The brand recommends it for all hair types. It is suitable for short haircuts with combs, fades, and tapers. For very fine edging on the beard or neck, an edging clipper with a T-blade will be more helpful.

Specifications

What else you need

• BaByliss PRO FX4in1 spray, recommended by the brand for blades
• Replacement blade 35087000 (FX8700ME), 45 mm
• Set of 8 FXPCGE combs, for FX8700
• Wahl oil for blades
• Wahl haircutting cape

ProBeauty tip. Put the clipper back on the stand between clients, not just at the end of the day. With 3 hours of charging for 2 hours of work, this way you won't run out of battery in the middle of a fade.

The BaByliss PRO 4Artists GoldFX is an all-metal, gold-colored hair clipper with an EDM Technology motor developed in collaboration with Ferrari and a 45 mm Japanese steel blade. It works corded or cordless at the same power. It is made for hairdressers, but you can easily use it at home, from classic haircuts to fades.

What it does for you

• Fades very close to the skin, with a 45 mm flat blade with a DLC and nickel-titanium coating and a very sharp V-shaped cutting angle.
• Constant power, with the high-torque digital motor, electronically controlled, quieter and with less vibration.
• Fine transitions between lengths, with 5-step adjustment: 0.8 – 1.4 – 2 – 2.8 – 3.5 mm.
• Eight fixed lengths, with combs of 1.5; 3; 4.8; 6; 10; 13; 16 and 19 mm.
• Approximately 120 minutes cordless after 3 hours of charging.

How to use it at home

1. Before first use, charge it for 3 hours. The red LED flashes while charging and stays lit when the battery is full.
2. Place the clipper in the stand only with the switch set to 0.
3. Remove the blade guard, turn it on and hold the clipper at a 45° angle. Put 2 drops of oil on the blades, leave it for a few seconds, then blot off the excess.
4. Turn off the clipper, attach the comb and press down on the back until it clicks.
5. The lever up shortens the cut, down lengthens it.
6. At the end, clean the blade with the brush and oil it. The combs can be rinsed, but dry them well.

For what type of haircut

The brand recommends it for all hair types, both for classic haircuts and for fades, outlines and hair tattoos. For fine lines on the neck and beard, an outline clipper with a T-blade gives you more control.

Specifications

What else you need

• BaByliss PRO 4 in 1 blade spray
• Wahl blade oil
• Graphite Taper FX803BME blade, for FX8700
• Set of 8 FXPCGE combs, for FX8700
• SkeletonFX GoldFX outline clipper, from the same collection

ProBeauty tip. When the LED starts flashing during use, you only have a few minutes left. Finish the cut and put the clipper in the stand, do not let it discharge completely.

BaByliss PRO 4Artists GoldFX is an all-metal, gold-colored hair clipper with an EDM Technology motor developed in collaboration with Ferrari and a 45 mm Japanese steel blade. It works corded or cordless at the same power.

Resealed product. It has been unsealed for inspection or display and may show minor signs of wear or handling. It is complete and fully functional, tested by us, and comes with the same warranty as a new product. It does not include the original box.

What it does for you

• Skin-close fades with a 45 mm flat blade featuring a DLC and nickel-titanium coating and a very sharp V-shaped cutting angle.
• Consistent power with a high-torque digital motor that is electronically controlled, quieter, and produces less vibration.
• Smooth transitions between lengths with 5 settings: 0.8 – 1.4 – 2 – 2.8 – 3.5 mm.
• Eight fixed lengths with guide combs of 1.5; 3; 4.8; 6; 10; 13; 16 and 19 mm.
• Approximately 120 minutes of cordless use after 3 hours of charging.

How to use it at home

1. Before first use, charge it for 3 hours. The red LED flashes while charging and stays lit when the battery is fully charged.
2. Place the clipper in the charging stand only with the power switch set to 0.
3. Remove the blade guard, turn the clipper on, and hold it at a 45° angle. Apply 2 drops of oil to the blades, leave them for a few seconds, then blot away any excess.
4. Turn off the clipper, attach the guide comb, and press down on the back until it clicks.
5. The lever shortens the cut when moved up and lengthens it when moved down.
6. Finally, clean the blade with the brush and oil it. The guide combs can be rinsed, but dry them thoroughly.

What type of haircut it is best for

The brand recommends it for all hair types, for both classic haircuts and fades, outlining, and hair tattoos. For fine lines on the neck and beard, an outlining clipper with a T-shaped blade gives you more control.

Specifications

What else you need

• BaByliss PRO 4-in-1 Blade Spray
• Wahl Blade Oil
• Graphite Taper Blade FX803BME, for FX8700
• Set of 8 FXPCGE Guide Combs, for FX8700
• Wahl Hairdressing Cape

ProBeauty Tip. When the LED starts flashing during use, you have about 3 minutes left. Finish your cut and place the clipper in the charging stand; do not let the battery discharge completely.

Discover the BaByliss PRO SnapFX Cordless Clipper - Professional Performance at Your Fingertips

The BaByliss PRO SnapFX clipper is the ideal high-performance tool for achieving professional haircuts, whether you're at home or in a salon. Combining advanced technology with an ergonomic design, this clipper allows you to create precise and uniform hairstyles with ease and comfort.

Key Features:

• Powerful Brushless Motor: Equipped with a digital brushless motor, this clipper offers a powerful torque of 6800RPM, ensuring power and speed for precise and efficient cuts.
• Fast Charging and Dual Battery System: The two lithium-ion batteries fully charge in just 3 hours when placed together on the charging stand. Additionally, a single battery charges in just 2 hours, ensuring you'll never run out of power. Each battery provides 2 hours of runtime, guaranteeing continuous and uninterrupted operation.
• Robust and Ergonomic Design: The robust metal construction is built to last, while the ergonomic and balanced design provides a perfect grip and excellent control.
• High-Precision DLC Fade Blade: The sharp black DLC blade is ideal for fades and precise cuts. Adjustable to zero gap and equipped with a smart opening system, it allows for quick and easy maintenance.

Benefits of the BaByliss PRO SnapFX Clipper:

• Power and Speed: The digital brushless motor delivers superior performance, ensuring fast and precise cuts for any hair type.
• Unlimited Runtime: Thanks to the dual interchangeable battery system, you will benefit from continuous, uninterrupted runtime. One battery charges while the other is in use, giving you a worry-free clipping experience.
• Ergonomic and Durable Design: The robust and ergonomic construction offers comfort and long-term durability, making it ideal for intensive daily use.
• Maximum Versatility: With a complete set of comb attachments and an adjustable blade, this clipper is perfect for any haircut style, from classic cuts to complex fades.

Technical Specifications:

• Runtime: Each battery provides 2 hours of use.
• Charging Time: 2 hours for a single battery, 3 hours for both batteries on the charging stand.
• Fade Blade: Adjustable to zero gap, with smart opening system for easy maintenance.
• Battery System: Two interchangeable lithium-ion batteries.
• Light Indicator: Light ring for battery charge level (solid blue for full battery, flashing blue for low battery, flashing red for almost discharged battery).
• Adjustment Lever: 5 detent cutting positions: 0.8, 1.4, 2, 2.8, 3.5mm.
• Metal Construction: Robust, ergonomic, and balanced design, with a textured cylindrical handle for a perfect grip.
• Comb Attachment Set: 8 premium comb attachments (0.5, 1, 1.5, 2, 3, 4, 5, 6mm) with fiberglass for durability and metal clips for secure fastening.

Purchase the BaByliss PRO SnapFX

Unleash your creativity and showcase your talent with the BaByliss PRO SnapFX. Exceptional cutting performance and unlimited runtime take the art of hairdressing to the next level. Don't miss the opportunity to offer your clients the best results and elevate your services to a superior professional level.

BaByliss PRO FreshFX is a cordless clipper with a 45 mm Japanese steel blade and a 6800 RPM DC motor. It is lightweight, weighing 275 g, and is designed for all experience levels. Charge it via USB-C.

What it does for you

• Uniform cutting with a corrosion-resistant Japanese steel blade and over 500,000 cutting strokes per minute.
• Control the length with a 5-position lever: 0.5 – 1.4 – 2.3 – 3.2 – 4.2 mm.
• Basic lengths with 8 guide combs included.
• Up to 120 minutes of cordless use, with 20 minutes of charging providing 20 minutes of cutting time.
• Won't slip from your hand: the handle is non-slip, with finger and thumb support.

How to use it at home

1. Charge it via the USB-C port on the base. The LED flashes while charging and stays lit when the battery is full.
2. Hold the clipper blade-down, away from your body, and put a drop of oil on the face and sides of the moving blade.
3. With the clipper turned off, place the comb on the blade face, slide it on, and press the back until it clicks.
4. Cut clean, dry, detangled hair. Moving the lever up shortens the cut, while moving it down lengthens it.
5. At the end, remove the combs and rinse them, then dry them thoroughly. Clean the blade with the brush and lubricate it.

For what type of haircut

It is suitable for short and medium haircuts, touch-ups, and your first fades if you are just learning to cut hair. For fine detailing around the neck and beard, its companion is the FreshFX trimmer.

Specifications

What else you need

• BaByliss PRO 4-in-1 blade spray
• Wahl blade oil
• FreshFX FX76E trimmer
• Straight cutting comb
• Wahl haircutting cape

ProBeauty tip. If you are just learning, start with the longest comb and gradually move down. It is easier to shorten it again than to fix a cut that is too short.

Attention! The product may have opened or damaged packaging and may show minor signs of use or small scratches that do not affect its functionality!

Babyliss Pro Lo-Pro FXONE Hair Clipper - Professional Performance at the Highest Level

Discover the Babyliss Pro Lo-Pro FXONE Hair Clipper, an innovative trimming tool, perfect for professionals and barbering enthusiasts. It belongs to the LO-PROFX range, renowned for its constant evolution in providing the most advanced grooming tools. The LO-PRO FXONE is equipped with a high-performance digital motor and an interchangeable lithium-ion battery, ensuring a superior trimming experience.

Key Features:

• Ultra Low-profile Metal Cap: Its ergonomic design reduces vibrations and noise, providing increased comfort during use.
• Improved N1 Digital Motor: 6,800 RPM motor, capable of performing 516,800 cutting actions per minute, offering increased efficiency and extended lifespan due to double ball bearings.
• 45mm Blue Titanium MIM Fade Blade: Zero-gap adjustable blade, with an integrated reservoir for constant lubrication and maintaining a low blade temperature.
• Interchangeable Lithium-Ion Battery: Up to 2.5 hours of operating time and 2 hours of fast charging. 4-step LED indicator for battery level.
• 5-Position Locking Taper Handle: Allows precise adjustment of cutting length (0.5 - 1.4 - 2.3 - 3.2 - 4.2 mm), offering maximum flexibility.

Included in the Package:

• 8 Guide Combs: Sizes (n° 0.5 – 1 – 1.5 – 2 – 3 – 4 – 5 – 6) for various haircut styles.
• Dual Voltage Charging Base: Ideal for global use.
• Blade Protection: To keep the blade in optimal condition.
• Spare Parts and Maintenance Tools: Spare blade cushion, screwdriver, cleaning tools, and lubricating oil.

Benefits:

• Superior Performance: With a powerful motor and high-quality blade, you get precise and fast haircuts.
• Durability: Robust construction and quality components ensure a long product lifespan.
• Ergonomics: Its innovative design offers comfort and ease of use, reducing hand fatigue during prolonged trimming sessions.

The Babyliss Pro Lo-Pro FXONE Hair Clipper is the ideal choice for any professional who wants to offer their clients top-notch haircuts with minimal effort. Invest in quality and performance with this advanced barbering tool.

BabylissPro FX3 Black Clipper

Discover the new standard in clippers with the BabylissPro FX3 Black. This clipper stands out for its ergonomic and comfortable design, offering a superior cutting experience.

Features:

• 5-level cutting height lock: The integrated button allows for quick and precise setting of cutting lengths at 0.7mm, 1.1mm, 1.4mm, 1.7mm, and 2.0mm.
• Two speed settings: From 6,000 rpm for precise and controlled cutting, up to 7,000 rpm for fast cutting on any hair type.
• Serrated titanium blade: With a sharper cutting angle for maximum precision and easier gliding through hair.
• LED battery indicators: Displays exact battery levels (75%, 50%, 25%, 0%), ensuring uninterrupted use.
• Wet and dry hair operation: Maximum versatility for cutting in various conditions.
• Long operating time: Up to 5 hours of continuous operation, with a 5-hour charging time.
• Reduced vibrations: For increased comfort during use.
• 2-ring hanging system: For easy and accessible storage at the workstation.

Package includes:

• BabylissPro FX3 Black Clipper
• 4 guide combs (3 mm, 6 mm, 10 mm, 13 mm)
• Cleaning oil
• Cleaning brush
• User manual