Up to 55% Off Appliances

✂️ Power. Precision. Personality.
Discover perfection in styling with GA.MA Bravo Gear Booster, the professional trimmer that combines state-of-the-art technology with adaptable design and top-notch functionality. Ideal for contours, finishes, and detailed haircuts, this device is the perfect choice for modern salons or premium personal use.

💎 DLC T-Blade – fine cutting, without compromise
The T-shaped blade, with DLC (Diamond Like Coating), offers millimetric precision, extended durability, and enhanced comfort. Due to reduced friction, it heats up less, maintaining an ideal temperature during operation. The 40 mm width quickly covers larger areas, but with total control.

⚡ Ultra-fast motor – 9000 revolutions per minute
The power of this trimmer is immediately felt: the high-speed motor allows for a uniform, fast, and clean cut, regardless of hair thickness. Whether you're a professional or a perfectionist, the Bravo Gear Booster delivers top-tier results.

🔋 Cordless autonomy – 60 minutes of total freedom
✔ USB charging – full charge in just 90 minutes
✔ Dual mode: corded or cordless use, for maximum flexibility
✔ Ideal for busy salons, travel, or home grooming sessions

🎨 Visual customization – 3 casings included
Change the look of your device anytime you want! In the box, you'll find covers in black, blue, and beige, for a trimmer as versatile as your style.

📏 Fine adjustment for any style:

• Minimum cutting length: 0.2 mm – perfect for clean contours
• 3 comb attachments included: 2 mm, 3 mm, 3.5 mm – for precise details and transitions

🧰 Everything you need, in one set:
✔ Charging base
✔ Maintenance oil
✔ Cleaning brush
✔ Compact design and light weight – for easy handling and fatigue-free use

Technical specifications:

• Motor type: Digital, 9000 rpm
• Blade: DLC T-Blade, 40 mm
• Minimum cut: 0.2 mm
• Power supply: USB
• Run time: 60 minutes
• Full charge: 90 minutes
• Usage: Corded/Cordless
• Weight: Compact, perfect balance
• Accessories: 3 casings, 3 comb attachments, oil, brush, charging stand

💡 Ideal for: high-precision finishes, contours, shaving, facial hair, and creative details

🎯 Our recommendation: Choose GA.MA Bravo Gear Booster if you want a professional trimmer with a powerful motor, impeccable cutting precision, wireless autonomy, and a fitting look. It's more than a device – it's an upgrade to your grooming routine.

Complete your clipper kit with the professional 12.0 mm guide comb, perfectly compatible with Wahl Kuno, Chromstyle, and Genio models. Ideal for barbers and hairstylists who want uniformity, precision, and enhanced control during haircuts.

Key Features

• Cutting length: 12.0 mm – ideal for uniform haircuts, medium layers, and natural finishes

• Compatibility: perfectly fits Wahl Kuno, Chromstyle, and Genio clippers

• Color: Black – professional design, easy to identify in the guide comb set

• Secure attachment – easily attaches and remains stable during use

Benefits

• Allows for controlled cutting, ideal for uniform layers

• Protects the scalp and provides enhanced comfort for the client

• Easy to clean and maintain

Choose the 12 mm guide comb for better cutting length control and professional results every time! Perfect compatibility with top Wahl models for uncompromising haircuts.

BabylissPro FX3 Black Clipper

Discover the new standard in clippers with the BabylissPro FX3 Black. This clipper stands out for its ergonomic and comfortable design, offering a superior cutting experience.

Features:

• 5-level cutting height lock: The integrated button allows for quick and precise setting of cutting lengths at 0.7mm, 1.1mm, 1.4mm, 1.7mm, and 2.0mm.
• Two speed settings: From 6,000 rpm for precise and controlled cutting, up to 7,000 rpm for fast cutting on any hair type.
• Serrated titanium blade: With a sharper cutting angle for maximum precision and easier gliding through hair.
• LED battery indicators: Displays exact battery levels (75%, 50%, 25%, 0%), ensuring uninterrupted use.
• Wet and dry hair operation: Maximum versatility for cutting in various conditions.
• Long operating time: Up to 5 hours of continuous operation, with a 5-hour charging time.
• Reduced vibrations: For increased comfort during use.
• 2-ring hanging system: For easy and accessible storage at the workstation.

Package includes:

• BabylissPro FX3 Black Clipper
• 4 guide combs (3 mm, 6 mm, 10 mm, 13 mm)
• Cleaning oil
• Cleaning brush
• User manual

The carving blade is made in Germany from the highest quality stainless steel. It offers a cutting length of 0.4 mm, with the blade width being 6.5 mm. The set features a quick-release stainless steel blade set and powerful cutting due to the precise grinding technology used. The 0.4 mm Wahl/Moser carving blade is lightweight, providing precise lines, contours, and designs for bold hairstyles and smooth, precise details for beard trimming. The blade set is compatible with Moser ChroMini and ChroMini Pro trimmers. The package contains: 1 blade + screws

The Panasonic Professional WER9714 is the original replacement blade for Panasonic ER1421 and ER1420 trimmers. The ER1421 is Panasonic's barber trimmer for beard styling, with a 45° cutting angle. When the blade gets dull, you replace it and work like it's the first day again.

What it does for you

• Sharp contours again: new teeth cut the hair cleanly, without leaving stray hairs along the beard line.
• Original part: WER9714 is the code given by Panasonic for the ER1421 and ER1420.
• Works on older models too: the packaging says it is also used with the ER149 and ER147.
• Keep your trimmer: you only replace the part that wears out, not the whole device.

How to use it at home

1. Turn off the trimmer and remove it from the charger.
2. Remove the old blade as shown in your trimmer's manual.
3. Shake out and brush away the hair collected under the blade.
4. Snap the new blade into place until it is secure.
5. Lubricate the teeth with a drop of oil and let the trimmer run for a few seconds.

For what type of machine

The official Panasonic page lists it for the ER1421 and ER1420. The original packaging also lists the ER149 and ER147. For the ER-RZ10, ER-DGP62, or ER-GP22, Panasonic has other blades with different codes.

Specifications

What else you need

• Oil for clipper blades
• Spray that cools and cleans the blades
• 4-in-1 spray for clipper maintenance

ProBeauty tip. When contouring, a worn blade is first felt on the short hairs on the neck, which remain uncut. When you notice this, don't press harder on the skin, it's a sign that it's time for the WER9714.

Wahl Kuno Professional Hair Clipper

The Wahl Kuno Professional Hair Clipper is a high-quality tool, perfect for professional hair cutting. With a compact design and exceptional performance, this clipper delivers precise results and consistent power.

Equipped with a brushless motor that reaches approximately 7200 rpm, and functional both corded and cordless, the Kuno clipper ensures high efficiency and a long lifespan. The Li-Ion battery provides up to 100 minutes of use after only 60 minutes of charging.

The new Taper Lever DIAMOND BLADE ensures precise cutting with an adjustable length from 0.8 mm to 1.8 mm. The high-precision carbon-coated blades "Made in Germany" are durable and easy to clean, offering superior cutting performance.

The Kuno clipper is lightweight, weighing only 210 g, and features an ergonomic design with an anti-slip element for perfect control and fatigue-free use.

Key features:

• Brushless DC motor - 7200 rpm
• Operating time up to 100 minutes
• Charging time 60 minutes
• Adjustable cutting length: 0.8-1.8 mm
• Cutting width: 46 mm
• 3 m cable with transformer
• Weight: 210 g

Included accessories:

• 6 secure-fitting attachment combs for easy handling (1.5/3/4.5/6/10/13 mm)
• Charging stand
• Plug-in transformer
• Cleaning brush
• Oil

Choose the Wahl Kuno Professional Hair Clipper for a professional, precise, and comfortable cut!

With the Wahl Professional Multi-Charge Stand, recharge three cordless Wahl Professional clippers, trimmers, and shavers all at once.
Customize your charge with six interchangeable inserts to fit the tools you need recharged.
Directly charge a phone, mobile payment device, or tablet from the charging station's USB-C port, eliminating the need for an additional power cord and reducing clutter.
Streamline your barber station by using a single cord, reducing clutter, and allowing the power station to sit flush against the wall.
Charge all your 5V Wahl Professional cordless tools, including: Cordless Senior, Cordless Magic Clip, Cordless Magic Clip Gold, Cordless Legend, Cordless Senior Metal Edition, Cordless Detailer Li Gold, Cordless Detailer Li, Hi-Viz, A•LIGN, Vanish.
The station contains:
3 clipper inserts
2 trimmer inserts
1 shaver insert
Power supply and cord
Instructions
Warranty certificate

The Wahl 5 Star Vanish Replacement Battery 08173-7030 is the replacement battery for the Wahl 5 Star Vanish shaver. The Vanish uses a lithium-ion battery, and Wahl clearly states that you should not remove it yourself. It should be installed by an authorized service center.

What it does for you

• The shaver works cordlessly again after the service center replaces the worn-out battery.
• Don't throw away the shaver: you only replace the battery, not the entire Vanish.
• Part with the Vanish family code, for the 08173-716 shaver.
• You know what to expect: Wahl gives the Vanish 100 minutes of use on a 50-minute charge.

How to use it at home

1. Fully charge the Vanish. When it's full, all 3 LEDs remain lit.
2. Use it cordlessly and monitor how long it lasts. When the battery is almost empty, the LEDs flash.
3. If it discharges much faster than 100 minutes, first check the power supply and contacts.
4. Until it is repaired, you can use the shaver while it is connected to the cable.
5. Take the entire shaver, along with the new battery, to an authorized Wahl service center. Do not remove the old battery yourself.

For what type of shaver

It is for the Wahl 5 Star Vanish shaver, code 08173-716. Compatibility is confirmed only for the Vanish, so do not buy it for other Wahl shavers. The old battery should not be disposed of with household waste; hand it in at a collection point.

Specifications

What else you need

• The Wahl 5 Star Vanish shaver, for which this part is intended
• Replacement motor for the Wahl Vanish
• Wahl Power Station charging station, compatible with the Vanish
• Wahl 3022905 replacement foil and blades for the Vanish

ProBeauty tip. Lithium-ion batteries do not like cold or heat. Wahl requires that you do not store or charge the shaver below 0 °C or above 45 °C, so do not leave it in the car during winter.

The Wahl 5 Star Vanish replacement motor 08173-7010 is the replacement part for the motor of the Wahl 5 Star Vanish shaver. It is a service part: it is installed by an authorized workshop or a qualified technician, not by you at home. You only need it if the shaver's motor has failed.

What it does for you

• Repair the Vanish instead of replacing it, when the motor no longer works.
• Part with the Vanish family code, for the 08173-716 shaver.
• Take it to the service center along with the shaver, so the repair doesn't have to wait for the part.
• Find out first if it really is the motor: the steps below help you rule out simple causes.

How to use it at home

1. Check the socket with another device that you know for sure works.
2. Check that the socket is not one that turns off with the room light.
3. Clean the shaver's contacts and the power supply of hair and dirt.
4. If the shaver only runs slower and the foil heats up, first replace the foil and blades. This is normal wear and tear, not the motor.
5. If it still doesn't start, take the shaver and the motor to an authorized Wahl service center or a qualified technician.

For what type of shaver

It is for the Wahl 5 Star Vanish shaver, code 08173-716. Compatibility is confirmed only for the Vanish, so do not buy it for the Finale, Super Close, Mobile Shaver, or for hair clippers. If you are not sure about the defect, first ask for a diagnosis at the service center.

Specifications

What else you need

• The Wahl 5 Star Vanish shaver, for which the part is intended
• Wahl 3022905 replacement foil and blades for Vanish
• Replacement battery for Wahl Vanish

ProBeauty's tip. Most often, the motor fails due to liquids. Wahl warns that excess liquid reaches the motor compartment and shortens its life, so spray the disinfectant only on the foils and wipe off the excess.

JRL FreshFade 2020C Professional Cordless Hair Clipper The JRL FreshFade 2020C professional cordless hair clipper features a quiet rotary motor (below 60dB) and a smart chip with intelligent technology. The clipper can be set to 2 cutting speeds: 6000rpm or 7200rpm, depending on the hair type or length. It is equipped with a speed lock button, which will maintain a fixed motor rotation even during intensive use and will prevent a decrease in speed. The JRL FreshFade clipper blade is made of a revolutionary material that operates at a low temperature. The adjustable cutting length between zero-gap, 0.5 and 3.5mm and the cutting width of 40mm allows for any type of haircut. The clipper is equipped with a 3.6V 3000mAh Lithium-Ion battery that allows for 240 minutes (4 hours) of operation, and the charging time is only 180 minutes (3 hours). It is very lightweight, weighing only 340 grams, allowing for an easy and very relaxing haircut. The clipper is equipped with a hanging hook for comfortable storage. Voltage 100-240V 50/60Hz suitable for European salons. The colored LED indicator display shows the remaining operating time, oil level, and charge level. The box contains: European Charger Screwdriver Lubricating and Maintenance Oil Cleaning Brush Blade Protection Zero-gap Adjustment Tool Charging Cable 10 Guide Combs (#½, #1, #1-1/2, #2, #3, #4, #5, #6, #7, #8) Premature wear of clipper blades: In general, physical wear can occur for several reasons. Most often it appears due to incorrect use or non-compliance with essential maintenance steps. Among the most common we can mention: -lack of lubricant film on the blade surface -rapid overheating during operation due to lack of proper maintenance -wear of the plastic guide -presence of residues (fur/hair, metals, dust and other foreign materials) between the lower and upper blade. We recommend using cooling and lubricating spray between haircuts for proper maintenance. Proper maintenance of clipper blades: Clipper blades must be oiled with a special oil before, during, and after use. If the clipper blades leave a streak or seem to slow down the clipper's movement, then they need screw adjustment, checking the tension spring or plastic guide, and lubrication with an oil film. The procedure involves applying a few drops of oil to the front of the blades and on the moving parts. Excess oil should be wiped off immediately with a dry, clean cloth. When not in use, clipper blades should be stored in a special dry box or in the packaging in which they were purchased.

The BaByliss PRO SkeletonFX Graphite FX707B2ZE T-Blade is a 40 mm replacement T-blade with a 2.0 mm deep tooth, designed for BaByliss PRO outline trimmers. It is zero-gap adjustable and made for clean outlines, sharp lines, and fine details. The brand recommends it for thick or coarse hair.

What it does for you

• Clean outlines and precise lines with a 40 mm zero-gap adjustable T-blade.
• Easily cuts through thick hair: the 2.0 mm deep tooth is designed for thick and coarse hair.
• Heats up less: the brand says that graphite has very low friction and keeps the blade cooler.
• Lasts a long time because the Graphite coating is very durable.
• Fits multiple devices on any blade system with 2 screws.

How to use it at home

1. Turn off the outline trimmer.
2. Unscrew the screws with a screwdriver and remove the old blade.
3. Place the new blade and check that it is in the correct position, then tighten the screws.
4. Adjust the zero-gap only if you know how, with the moving blade slightly below the fixed one.
5. Clean and maintain the blade with the FX4in1 spray before and during use.

For what type of device

The brand lists it as compatible with the LO-PROFX FX726E trimmer, all FX7870 metal outline trimmers, and any device with a blade held by 2 screws. If you have sensitive skin, choose a blade with a standard tooth.

Specifications

What else you need

• SkeletonFX Gunsteel FX7870GSE Outline Trimmer
• SkeletonFX GoldFX FX7870GE Outline Trimmer
• BaByliss PRO FX4in1 Spray, Recommended by the Brand
• Wahl Blade Oil

ProBeauty Tip. Keep the old blade until you check that the new one cuts well. If it pulls the hair or pricks the skin, the zero-gap adjustment is incorrect and needs to be redone.

Spare parts - Printed circuit board for Wahl 5V trimmer

Sensus Alisa Professional Hair Straightener

Transform your hair instantly with Sensus by Alisa. The high-quality professional straightener ensures a perfect result without weighing down the hair. Specially designed titanium plates with ceramic heating elements ensure a constant temperature level for as long as it is used, while guaranteeing straight hair, free of frizz. The ceramic plates offer triple protection through negative ionization technology and infrared heat, while preserving the natural moisture and all other natural components of the hair. This way the hair remains healthy. The specially designed plates ensure ideal contact with the hair regardless of the application angle.

Emergent titanium ceramic plates.

Initial activation temperature 210C.

Continuous and automatic heat control. With a choice of 19 temperature levels: 150-230C

360-degree swivel cord for easier use.

Rated voltage: AC 110V-240V

Ergonomic design for ease of use

TITANIUM PRO,
TITANIUM CURLING IRON WITH CLAMP
The Titanium Pro curling iron is the perfect combination of strength and creativity. High-performance and multifunctional, it creates perfect hairstyles for the stage, backstage, or special occasions. Maximum comfort during use thanks to the elegant rubber finish that characterizes the line with a captivating design. Titanium Pro, the device for creating unique hairstyles.

TECHNICAL FEATURES:
- titanium barrel for even heat distribution
- MCH ceramic dual heater for constant temperature during styling
- advanced system with color digital display: blue indicates the curling iron is heating up; green indicates it has reached 180°C; red indicates the maximum temperature of 210°C
- non-slip and anti-scald soft-touch rubber finish

Jaguar - Charging stand for J-Cut 30 contour trimmer

🔪 Panasonic Professional Blade Set PPWER97161361 – designed for precision performance and maximum durability.
Made from high-quality stainless steel, this blade set offers a clean and even cut, ideal for professional use in salons or at home.

💡 Key Features:

• 🔸 Compatible with Panasonic ER-DGP62, ER-FGP62, and ER-HGP62 models
• 🔸 High-precision sharpening for a fine and safe cut
• 🔸 Material: corrosion-resistant stainless steel
• 🔸 Easy to assemble and clean
• 🔸 Consistent performance even after prolonged use

⚙️ Ideal for:
Professional barbers and users who want perfect results with every haircut.

📦 Package contents:
1 x Panasonic Professional Blade Set PPWER97161361

BaByliss PRO BABZ020000010 is the replacement motor for the BaByliss PRO Caruso hair dryer. It is a service part, not an accessory: it is installed inside the dryer by an authorized service center. You buy it if the technician has told you that your Caruso dryer's motor needs to be replaced.

What it does for you

• It can bring your dryer back to life, if the fault is with the motor and the rest of the appliance is in good condition.
• Repair instead of throwing away: a good salon dryer is often worth repairing.
• You have the part with the brand code, BABZ020000010, which the service center can easily verify.
• You shorten the repair time, if the service center does not have the part in stock.

How to use it at home

1. You do not install it at home. The motor is connected to the dryer's electrical system, and incorrect installation can be dangerous.
2. Unplug the dryer and do not use it again until it is repaired.
3. Note down the exact model and code on the handle or the dryer's label.
4. Check with the service center that BABZ020000010 is the right part for your model.
5. Take the dryer and the motor to an authorized BaByliss PRO service center or to a qualified technician.
6. After repair, clean the filter at the back before the first use.

For what type of appliance

The motor is listed for the BaByliss PRO Caruso dryer. BaByliss PRO has had several dryers with this name, for example Caruso (BAB6510IE) and Caruso HQ (BAB6970IE), and the brand does not publish a compatibility sheet for this code. Do not order it until you confirm the model with the service center or with us.

What else you need

• BaByliss PRO BABD11E Diffuser, compatible with Caruso dryers
• Olivia Garden Ceramic+Ion SpeedXL 45 Round Brush
• Wella EIMI Thermal Image Heat Protection Spray

ProBeauty Tip. Before replacing the motor, ask the service center to also check the cable at the handle's exit. In dryers used daily, faults often occur there.

BaByliss PRO 35000591 is a replacement blade set sold for the FlashFX FX59ZE and EtchFX FX69ZE contour trimmers. According to the brand's specifications, these trimmers feature a zero-adjustable stainless steel T-blade, ideal for contours, sideburns, and the neck. The set snaps directly onto the head without screws.

What it does for you

• Restores clean contours when the old blade no longer cuts cleanly on the first pass.
• Changes in seconds: the blade set snaps off and attaches with your thumb, no screwdriver required.
• Keeps your trimmer working: you only replace the worn blades, not the entire trimmer.
• Can be adjusted to zero using the adjustment tool provided with the trimmer, if you want very close trims.

How to use it at home

1. Set the switch to "0-OFF" and unplug the trimmer.
2. Place your thumb under the small blade and push forward to detach the blade set from the housing.
3. Place the new set on the trimmer head.
4. Press the large blade with your thumb until it clicks into place.
5. Apply a few drops of oil to the blades, without overdoing it, and turn on the trimmer.

For which type of trimmer

It is sold for the BaByliss PRO FlashFX FX59ZE cordless and EtchFX FX69ZE corded contour trimmers. It is not for the SkeletonFX FX7870 or LO-PROFX series, which attach with screws. If you have a different trimmer, write us the code before ordering.

What else you need

• BaByliss PRO 4-in-1 Blade Care Spray
• Wahl Blade Oil for lubricating the blades, 100 ml
• Wahl Blade Ice Spray for cooling and cleaning the blades

ProBeauty Tip. If you want to adjust the blades to zero, use only the adjustment tool provided with the FX59ZE or FX69ZE. Adjusting by eye can cause the moving blade to protrude beyond the fixed blade.

BaByliss PRO FX821E FX500ME is a replacement blade sold for the BaByliss PRO FX821E mini clipper. The FX821E is a mini hair clipper and trimmer with two detachable blades, one fine and one coarser. You use it for sideburns, neck, beard, and mustache.

What it does for you

• It brings back clean finishes on your sideburns, neck, beard, and mustache.
• It keeps your clipper working: you only replace the worn blade, not the entire clipper.
• It can be replaced without service, because the blades of the FX821E clipper are detachable.
• It cuts again without pulling, when the old blade has become dull.

How to use it at home

1. Turn off the clipper and unplug it.
2. Remove the old blade, as shown in the clipper manual.
3. Place the new blade in the same position and press until it is firmly attached.
4. Put a drop of oil on the teeth and turn on the clipper for a few seconds.
5. Test the cut on a small area before finishing.

For what type of clipper

It is sold for the BaByliss PRO FX821E mini hair clipper and trimmer, an older model. The brand does not publish a sheet for the FX500ME code or any other compatible models. If you have another clipper, write us its code before ordering, so you do not receive a blade that does not fit.

What else you need

• BaByliss PRO 4-in-1 spray for blade maintenance
• Wahl oil for lubricating the blades, 100 ml
• Wahl Blade Ice spray for cooling and cleaning the blades

ProBeauty's tip. When ordering, take the old blade with you or a photo of it next to the clipper. This way you can immediately see if you need the fine blade or the coarser one of the FX821E clipper.

BaByliss PRO 3 mm Guard for FX660SE is the 3 mm replacement guard for the FX660SE hair clipper. It is the shortest of the 5 guards the brand offers for this clipper: 3, 6, 9, 12, and 16 mm. Get it if you have lost or broken the original one.

What it does for you

• Cut evenly at 3 mm again without buying another complete set.
• Complete the original set of the FX660SE clipper with the missing guard.
• Create clean short transitions on the sides and at the nape of the neck.
• Easily switch to the blade adjustment for lengths under 3 mm, which the FX660SE has from the factory.

How to use it at home

1. Turn off the clipper and clear the hair from the blade.
2. Place the guard over the blade and press until it locks into place.
3. Check that it is securely attached before turning on the clipper.
4. Cut with even strokes, without pressing the guard into the scalp.
5. After cutting, remove it, brush off the hair, and store it with the other guards.

For which type of device

It is the 3 mm guard for the BaByliss PRO FX660SE hair clipper. It is not a set: you receive a single guard. For the FX8700, FX825, or FX895E clippers, choose the FXPCGE set, made for them.

Specifications

What else you need

• BaByliss PRO FX4in1 Spray for blade maintenance
• Wahl Oil for hair clipper blades
• Straight cutting comb
• Wahl cutting cape

ProBeauty Tip. For a smooth transition under 3 mm, remove the guard and use the FX660SE blade adjustment, which ranges from 3.2 to 0.8 mm. This way, you blend the 3 mm guard with the short-cut area.

BaByliss PRO 35087000 is the 45 mm replacement blade for the ChromFX FX8700E hair clipper. The brand lists it as the replacement blade on the clipper's page. It is a Japanese steel blade with a very sharp V-shaped cutting angle, designed for fading.

What it does for you

• Restores the cut to like-new condition, as it is the brand's recommended replacement blade for the FX8700E.
• Cuts cleanly and precisely, thanks to the Japanese steel with a V-shaped cutting angle.
• Gets very close to the skin: it is a flat blade, ideal for blending harsh lines.
• Covers a wide area, with a width of 45 mm.

How to use it at home

1. Turn off the clipper and set the fine adjustment lever on the left to the top position.
2. Loosen the screws with a screwdriver and set them aside.
3. Lift the old moving blade slightly and replace it with the new one on the oscillator.
4. Place the new fixed blade, with the moving blade centered and parallel to it, to avoid injury.
5. Tighten the screws back into place.
6. Clean and lubricate the blade regularly with BaByliss PRO 4 in 1 spray or oil.

For which type of device

It is the replacement blade for the BaByliss PRO ChromFX FX8700E hair clipper, as stated on the clipper's page. The brand does not list this code for other FX8700 variants. If you have the FX8700 Gold, Boost+, or LO-PROFX FX825, choose a blade with compatibility published for the entire series.

Specifications

What else you need

• BaByliss PRO ChromFX FX8700E hair clipper
• BaByliss PRO 4 in 1 spray for blade maintenance
• Wahl oil for lubricating blades, 100 ml
• Wahl Blade Ice spray for cooling and cleaning blades

ProBeauty tip. Check the label under the clipper to make sure it says FX8700E, not just FX8700. For the other variants, blades compatible with the entire series are the safe choice.

Wahl Beretto Motor 95368-1016 is the complete replacement motor that the official Wahl parts list specifies for the Beretto ProLithium (4212-0470) clipper. Replace it when the old motor no longer starts or has lost power. The clipper is repairable, not disposable.

What it does for you

• Your clipper is back in action: a new motor, while the housing, battery, and blade remain.
• Complete motor: the Wahl list refers to it as "Motor completo Beretto," meaning the entire motor assembly, not just one of its components.
• The exact model code: 95368-1016 is listed for the Beretto ProLithium, alongside its other parts.
• Simpler servicing: the technician receives the part directly from the Wahl list.

How to use it at home

1. Fully charge the clipper, clean and lubricate the blade: sometimes this solves a slow clipper.
2. If that doesn't help, check the label to make sure you have the Beretto 4212-0470.
3. Take the clipper and motor to an authorized Wahl service center for installation.
4. After repair, test the clipper for a few minutes with a lubricated blade before cutting hair.

For what type of device

For the Wahl Beretto ProLithium (4212-0470) cordless clipper, as specified in the Wahl parts list. We have no confirmation for the Beretto Stealth, as it has a different model code. It is not for the Beret, which has a different motor.

What else you need

• Wahl 97581-2016 Charger for Beret and Beretto
• Wahl Blade Oil
• Wahl Blade Ice Spray for Blades

ProBeauty Tip. Keep the old motor until the repair is finished. If the service center finds another cause, you can return the unopened new part.

Wahl Guard No. 8 Black 25 mm is the standard Wahl 25 mm guard, sold separately. Wahl says that No. 8 leaves approximately 25 mm of hair: you shorten long hair without losing much length. You get it to replace a lost or broken one, or to have a second one on hand.

What it does for you

• Cuts evenly at 25 mm over the entire area you pass the clipper over.
• You use it to shorten long hair without losing much length.
• You complete the set without having to buy all 8 guards again.
• Works on several Wahl clippers: the brand lists it as compatible with 8 models, from Super Taper to Balding.

How to use it at home

1. Turn off the clipper and brush the hair off the blade.
2. Snap the guard onto the blade and press until it clicks. Check that it is secure before turning it on.
3. Cut against the direction of hair growth, using even strokes.
4. Pass over the same area several times to catch the lying hairs.
5. After cutting, clean it with a small brush. From time to time, wash it with warm water and mild soap and let it dry completely.

For what type of clipper

Wahl lists it as compatible with Super Taper, Super Taper Cordless, Legend, Legend Cordless, Senior Cordless, Magic Clip, Magic Clip Cordless, and Balding. You receive a single guard, not a set. It is not for outline clippers or for clippers with slide-on guards, such as Kuno or ChromStyle.

Specifications

What else you need

• Wahl Guard No. 7, shorter
• Complete Wahl Premium Guard Set
• Wahl Magic Clip Cordless Clipper
• Wahl Clipper Blade Oil

ProBeauty Tip. No. 8 is useful for taking off only the ends. Cut a little with it first, check the length in the mirror, then decide whether to go down to No. 7 (22 mm).

Wahl No. 7 Black 22 mm Guard is the standard Wahl 22 mm guard, sold separately. Wahl says that No. 7 leaves approximately 22 mm of hair, a length commonly used to style and taper longer hair. Get it to replace a lost or broken one, or to have a spare on hand.

What it does for you

• Cuts uniformly to 22 mm over the entire area you pass over with the clipper.
• Use it to style and taper longer hair.
• Complete your set without having to buy all 8 guards again.
• Works with several Wahl clippers: the brand lists it as compatible with 8 models, from the Super Taper to the Balding.

How to use it at home

1. Turn off the clipper and brush the hair off the blade.
2. Snap the guard onto the blade and press until it clicks into place. Check that it is securely attached before turning it on.
3. Cut against the direction of hair growth, using even strokes.
4. Pass over the same area several times to catch lying hairs.
5. After cutting, clean it with a small brush. Occasionally, wash it with warm water and mild soap and let it dry completely.

For what type of clipper

Wahl lists it as compatible with the Super Taper, Super Taper Cordless, Legend, Legend Cordless, Senior Cordless, Magic Clip, Magic Clip Cordless, and Balding. You receive a single guard, not a set. It is not for outline clippers or clippers with slide-on guards, such as the Kuno or ChromStyle.

Specifications

What else you need

• Wahl No. 6 guard, shorter
• Wahl No. 8 guard, longer
• Complete Wahl Premium guard set
• Wahl Magic Clip Cordless clipper
• Wahl clipper blade oil

ProBeauty tip. On longer hair, first comb the hair against the direction of growth. The clipper with No. 7 catches it evenly and does not leave patches.

Wahl No. 6 Black 19 mm Guard is Wahl's standard 19 mm guard, sold separately. Wahl says that No. 6 leaves approximately 19 mm of hair, for longer, classic haircuts. Get it to replace a lost or broken one, or to have a spare on hand.

What it does for you

• Cuts uniformly at 19 mm over the entire area you pass over with the clipper.
• Use it for longer, classic haircuts.
• Complete your set without having to buy all 8 guards again.
• Works with several Wahl clippers: the brand lists it as compatible with 8 models, from the Super Taper to the Balding.

How to use it at home

1. Turn off the clipper and brush the hair off the blade.
2. Place the guard on the blade and press until it clicks into place. Check that it is secure before turning it on.
3. Cut against the direction of hair growth, using even strokes.
4. Pass over the same area several times to catch the lying hairs.
5. After cutting, clean it with a small brush. Occasionally, wash it with warm water and mild soap and let it dry completely.

For which type of clipper

Wahl lists it as compatible with the Super Taper, Super Taper Cordless, Legend, Legend Cordless, Senior Cordless, Magic Clip, Magic Clip Cordless, and Balding. You receive a single guard, not a set. It is not for outline clippers or clippers with slide-on guards, such as the Kuno or ChromStyle.

Specifications

What else you need

• Wahl No. 5 guard, shorter
• Wahl No. 7 guard, longer
• Complete Wahl Premium guard set
• Wahl Magic Clip Cordless clipper
• Wahl clipper blade oil

ProBeauty tip. On thicker hair, pass the clipper over it several times from different directions. No. 6 leaves a lot of length, and lying hairs are easily missed on the first pass.

Wahl Guard No. 4 Black 13 mm is the standard Wahl 13 mm guard, sold separately. Wahl says that No. 4 leaves approximately 13 mm of hair, a length commonly used for crew cuts and brush cuts. Get it to replace a lost or broken one, or to have a spare on hand.

What it does for you

• Cuts uniformly to 13 mm over the entire area you pass the clipper over.
• Use it for crew cuts and brush cuts.
• Complete your set without having to buy all 8 guards again.
• Works with several Wahl clippers: the brand lists it as compatible with 8 models, from the Super Taper to the Balding.

How to use it at home

1. Turn off the clipper and brush the hair off the blade.
2. Snap the guard onto the blade and press until it clicks into place. Check that it is securely attached before you start.
3. Cut against the direction of hair growth, using even strokes.
4. Pass over the same area several times to catch the lying hairs.
5. After cutting, clean it with a small brush. From time to time, wash it with warm water and mild soap and let it dry completely.

For what type of clipper

Wahl lists it as compatible with the Super Taper, Super Taper Cordless, Legend, Legend Cordless, Senior Cordless, Magic Clip, Magic Clip Cordless, and Balding. You receive a single guard, not a set. It is not for outline clippers or clippers with slide-on guards, such as the Kuno or ChromStyle.

Specifications

What else you need

• Wahl Guard No. 3, shorter
• Wahl Guard No. 5, longer
• Complete Wahl Premium Guard Set
• Wahl Magic Clip Cordless Clipper
• Wahl Clipper Blade Oil

ProBeauty Tip. For a crew cut, leave No. 4 on top and go down to No. 3 (10 mm) on the sides. Blend the areas by passing No. 4 only over the transition line.

Wahl No. 2 Black 6 mm Guard is the standard Wahl 6 mm guard, sold separately. Wahl says that No. 2 leaves approximately 6 mm of hair: a short haircut, but slightly longer. Get it to replace a lost or broken one, or to have a spare on hand.

What it does for you

• Cuts uniformly at 6 mm over the entire area you pass the clipper over.
• Use it for a short haircut, slightly longer than a buzz cut.
• Complete your set without having to buy all 8 guards again.
• Works with several Wahl clippers: the brand lists it as compatible with 8 models, from the Super Taper to the Balding.

How to use it at home

1. Turn off the clipper and brush the hair off the blade.
2. Place the guard on the blade and press until it clicks into place. Check that it is secure before turning it on.
3. Cut against the direction of hair growth, using even strokes.
4. Pass over the same area several times to catch the lying hairs.
5. After cutting, clean it with a small brush. From time to time, wash it with warm water and mild soap and let it dry completely.

For what type of clipper

Wahl lists it as compatible with the Super Taper, Super Taper Cordless, Legend, Legend Cordless, Senior Cordless, Magic Clip, Magic Clip Cordless, and Balding. You receive a single guard, not a set. It is not for outline clippers or clippers with slide-on guards, such as the Kuno or ChromStyle.

Specifications

What else you need

• Wahl No. 1 Guard, shorter
• Wahl No. 3 Guard, longer
• Complete Wahl Premium Guard Set
• Wahl Magic Clip Cordless Clipper
• Wahl Clipper Blade Oil

ProBeauty Tip. If you are cutting with the clipper for the first time, start with No. 2 over the entire head. See how it looks and only then go down to No. 1 (3 mm) on the sides.

Wahl Beret Motor 08723-1716 is the replacement motor that Wahl lists as the official part for the Beret trimmer. Replace it when the old motor has burned out, makes unusual noise, or no longer has power. The rest of the machine remains the same.

What it does for you

• Restore your trimmer without buying a new Beret.
• The exact part: Wahl lists 08723-1716 as the "Beret Motor" for both the silver and black versions.
• Same performance as before: the motor is made for the model, not an adapted part.
• Faster service: the technician receives the part directly from the Wahl list.

How to use it at home

1. Rule out simple causes: clean the blade, apply oil, and fully charge the machine.
2. If the motor still does not work properly, check the model on the label: Beret 08841-616 or 08841-1516.
3. Take the machine and motor to an authorized Wahl service center; Wahl has authorized repair centers in Europe.
4. After installation, oil the blade and test the machine for a few minutes before use.

For what type of device

For Wahl Beret trimmers: the silver model 08841-616 and the black Stealth Beret model 08841-1516, as listed in the Wahl parts list. It is not for the Beretto, Detailer, or Magic Clip, which have different motors in the same list. For an older Beret with a different code, ask us.

What else you need

• Wahl Beret Trimmer
• Wahl Beret Stealth Replacement Blade
• Wahl 97581-2016 Charger for Beret and Beretto
• Wahl Blade Oil
• Wahl Blade Ice Spray for Blades

ProBeauty Tip. Most motors wear out because the blade is unlubricated and clogged with hair. After repair, put a drop of oil on the blade before every trim and clean out the collected hair.

The Wahl Magic Clip and Super Taper Cordless printed circuit board 08591-2030 is the replacement electronic board listed on the official Wahl parts list for the Magic Clip Cordless 08148-016 and Super Taper Cordless. The circuit connects the battery, switch, and motor. When it fails, the clipper will no longer turn on or charge.

What it does for you

• Repair the clipper, don't throw it away: if the rest of the clipper is in good condition, a new circuit will get it working again.
• The same part number for two models: the Wahl parts list lists 08591-2030 for both the Magic Clip Cordless and Super Taper Cordless.
• Genuine Wahl part, with the part number from the brand's parts list.
• Simpler servicing: the technician receives the correct part directly, without searching.

How to use it at home

1. First, check the charger and contacts; a clipper that won't turn on doesn't always have a faulty circuit.
2. Check the clipper's label: the circuit is for the Magic Clip Cordless 08148-016 and Super Taper Cordless.
3. Take the clipper and part to an authorized Wahl service center; Wahl has authorized repair centers in Europe.
4. After installation, fully charge the clipper and oil the blade before the first use.

For which type of device

For Wahl Magic Clip Cordless 08148-016 and Super Taper Cordless clippers, as listed on the Wahl parts list. It is not confirmed for newer generations of the Magic Clip Cordless or for the Senior. It is a service part, not an accessory you swap between clippers.

What else you need

• Wahl Magic Clip Cordless Clipper
• Wahl Super Taper Cordless Clipper
• Wahl Magic Clip Cordless Replacement Blade
• Wahl Blade Oil
• Wahl Blade Ice Spray

ProBeauty Tip. Before spending money on a circuit board, ask the service center for a diagnosis. In cordless clippers, a worn battery shows similar symptoms, and the repair may be different.

The Moser Edition Pro Motor for dryer 0210-7251 is the replacement motor for the Moser Edition Pro professional hair dryer. According to the Moser data sheet, the Edition Pro has a safety thermostat and a removable filter that you can clean. Replace it when the dryer no longer blows, blows weakly, or the motor makes noise.

What it does for you

• The dryer blows powerfully again: the motor is what provides the airflow for fast drying.
• You don't buy another dryer: the housing, heating element, and nozzles remain, if they are in good condition.
• The dryer remains the one you know: the speed and heat settings and the cool air button remain the same.
• Service repair: installation is done with original parts, as required by Moser.

How to use it at home

1. Unplug the dryer and let it cool down.
2. Remove the filter and clean it; a clogged filter suffocates the motor.
3. If the dryer still doesn't work well, take it with the new motor to an authorized service center.
4. After installation, turn it on at the low setting first and listen to see if it runs evenly.

For what type of device

For the Moser Edition Pro hair dryer, type 4330/4331. Moser does not publish the parts list for this dryer, so check the type on the device label before ordering. It is not a part for clippers or other dryers.

What else you need

• Heat protection spray
• Heat protection spray for smoothing
• Round brush for drying

ProBeauty tip. Clean the dryer filter once a week if you use it daily. The air passes freely, the motor does not overheat, and the thermostat does not stop the dryer in the middle of styling.

The Moser Li+Pro Battery with Circuit 1884-7100 is the battery and electronic board assembly for the Moser Li+Pro clipper. The Li+Pro can be used corded or cordless, according to Moser. Replace it when the clipper holds its charge for less and less time or no longer charges.

What it does for you

• Cut cordlessly again: without a good battery, the Li+Pro remains plugged in.
• Order by code: compare 1884-7100 with the code on the old part before installation.
• One-piece battery and circuit: the service center replaces the assembly, not individual parts.
• You can also work corded: until installation, the clipper can be used plugged in.

How to use it at home

1. First, check the stand, power supply, and charging contacts.
2. Take the clipper and part to a service center; Moser requires that batteries be replaced only there.
3. After installation, fully charge the clipper on the stand before the first cut.
4. Clean and lubricate the blade after each use so that the battery lasts as long as possible.

For what type of device

For the Moser Li+Pro clipper, type 1884, the one with the Magic Blade II blade. Code 1884-7100 does not appear in the parts list published by Moser, and for the Li+Pro², the list shows a different battery. Check the type on the clipper's label and the code of the old part before ordering.

What else you need

• Moser Li+Pro 1884-7020 Motor
• Blade oil
• Blade cooling and cleaning spray
• Hairdressing cape

ProBeauty Tip. Moser manuals state that you should not leave the clipper exposed to frost or high heat for long periods. Do not leave it in the car during summer or near a heater.

The Moser Li+Pro Motor 1884-7020 is the replacement motor that Moser's official parts list calls the "1884 Li+Pro motor" and lists for the Li+Pro². According to Moser's data sheet, the Li+Pro has a chip-controlled DC motor with noise reduction, operating at approximately 5200 rpm. Replace it when the clipper no longer starts or loses power while cutting.

What it does for you

• Consistent power again: Moser says that the chip-controlled motor maintains consistent cutting power.
• Keep your clipper: the Magic Blade II blade, battery, and stand can be reused if they are in good condition.
• The correct part number: 1884-7020 is the motor listed in Moser's parts list.
• Work quietly: a new motor no longer makes the noise of a worn-out motor.

How to use it at home

1. Fully charge the clipper and clean the blade; a stuck blade can make a motor seem defective.
2. If it still doesn't work, take the clipper and motor to an authorized service center.
3. After installation, oil the blade and run the clipper for a few minutes.
4. When cutting long hair, take short breaks to let the blade cool down.

For which type of clipper

For Moser Li+Pro (type 1884) and Li+Pro² (type 1888) clippers, according to Moser's designation and parts list. This is not the motor for the Li+Pro Mini, which is a different clipper with a narrower blade. If you don't know the type, check the label on the clipper.

Specifications

What else you need

• Moser Li+Pro 1884-7100 battery with circuit
• Blade oil
• Blade cooling and cleaning spray
• Clipping cape

ProBeauty tip. The Li+Pro has an indicator that shows you when the blade needs to be oiled. Don't ignore it: a dry blade puts extra strain on the motor and wears it out faster.

The Moser ChromStyle Pro Battery 1871-7960 is the replacement battery for the Moser ChromStyle Pro hair clipper. Moser's official parts list specifies it for the black and white ChromStyle Pro and the 1871-0078 set. The manual states that the clipper uses a LiFePO4 lithium-ion battery. Replace it when the clipper's cordless runtime becomes increasingly short.

What it does for you

• Restore full runtime: Moser states that the ChromStyle Pro provides up to 90 minutes of cordless runtime.
• Fast charging: according to the manual, the clipper charges in approximately 60 minutes.
• No memory effect: Moser describes the clipper's lithium batteries as durable and free from memory effect.
• Battery only: Moser's parts list specifies the circuit separately, so you only pay for the worn part.

How to use it at home

1. Clean and lubricate the blade; the manual states that a very dirty and unlubricated blade can cut the runtime in half.
2. If the clipper's runtime is still too short, take it to an authorized service center; Moser requires that batteries be replaced only there.
3. After installation, place the clipper on the stand; overcharging is prevented by the intelligent charging management system.
4. Use it corded via the power supply while the clipper is charging.

For which type of device

For the Moser ChromStyle Pro hair clipper, model 1871: 1871-0071, 1871-0072, and the 1871-0078 set, as specified in Moser's parts list. We cannot confirm compatibility with other ChromStyle clippers, including those sold under the Wahl brand. Send us the code on the label and we will check.

Specifications

What else you need

• Moser 1854-7833 stand and guide
• Blade oil
• Blade cooling and cleaning spray
• Hair clipper cape

ProBeauty tip. The Moser manual states that runtime gradually decreases with daily use, even with batteries designed for professional use. If the clipper has been used intensively for several years, it is normal for it to require a new battery.

The Moser Genio Plus Support and Guide 1854-7833 is a replacement part for the Moser Genio Plus hair clipper. The code 1854 is the Genio Plus clipper type. Moser does not publish a data sheet for this part, so order it when the service center or the code on the old part tells you exactly 1854-7833.

What it does for you

• The clipper is back to work: you only replace the broken or worn part, by its code.
• Order by code, not by picture: compare 1854-7833 directly with the code on the old part.
• Part for the clipper type: the prefix 1854 is the Genio Plus type.
• Minor repair: you don't replace the whole clipper for a small part.

How to use it at home

1. Remove the battery and then the blade, sliding it off the housing.
2. Compare the code and shape of the old part with the new part before installation.
3. If you have never disassembled a clipper, leave the installation to an authorized service center.
4. After installation, snap the blade back into place until it clicks, lubricate it, and turn on the clipper as a test.

For what type of device

For the Moser Genio Plus hair clipper, type 1854, with the detachable Magic Blade blade. For the ChromStyle Pro, which uses the same blade, Moser does not confirm the part. Check the type on the clipper label and the code of the old part before ordering.

What else you need

• Moser Genio Plus Motor 1854-7060
• Moser Genio Plus Battery 1854-7988
• Moser ChromStyle Pro Battery 1871-7960
• Blade oil
• Cooling and cleaning spray for blades

ProBeauty tip. When removing the Genio Plus blade, slide it off the housing as shown in the manual and do not force it sideways. The parts around it will last longer.

The Moser Genio Plus Motor 1854-7060 is the replacement motor for the Moser Genio Plus hair clipper, the one with the removable battery. The official Moser parts list refers to it in the Genio Plus as the "2.6 V 1854 motor". Replace it when the clipper no longer starts with a charged battery or loses power while cutting.

What it does for you

• Cut with power again: The Genio Plus has, according to Moser, a noise-dampened DC motor with approximately 5000 rpm.
• Keep the two-battery system: the clipper comes with two batteries and continues to work with them.
• Part with the correct code: 1854-7060 is the motor in the Genio Plus parts list.
• Repair, not a new device: the Magic Blade blade, batteries, and charging station remain.

How to use it at home

1. First, try the other charged battery; sometimes the battery is worn out, not the motor.
2. Clean and lubricate the blade; a stuck blade strains the motor.
3. If the clipper still does not work, take it with the new motor to an authorized service center.
4. After installation, oil the blade and run the clipper for a few minutes as a test.

For what type of device

For the Moser Genio Plus hair clipper, type 1854, with a removable battery and 46 mm Magic Blade blade. It is not the motor for the Arco pet clipper, which has a different code in the Moser parts list, nor for the standard Genio, type 1565.

Specifications

What else you need

• Moser Genio Plus Battery 1854-7988
• Moser 1854-7833 Holder and Guide
• Blade oil
• Blade cooling and cleaning spray

ProBeauty Tip. Use the batteries one after the other, not just one. The Genio Plus manual is designed around this idea: one works, the other charges. The motor always receives a good voltage.

The Moser ChroMini Battery 1590-7290 is the replacement battery for the Moser ChroMini cordless trimmer. The ChroMini runs only on battery power, so a worn-out battery will cause it to stop working. Replace it when the trimmer holds its charge for less and less time or no longer charges.

What it does for you

• The trimmer works again: The ChroMini runs only on battery power, without a cable.
• Unrushed contouring: no more working with your eyes glued to the little light at the bottom of your beard.
• You keep the small and lightweight trimmer: Moser describes it as very light and quiet.
• Simple repair in the service center: only the battery is replaced, the rest of the trimmer remains.

How to use it at home

1. First, check the stand and charging contacts; clean them of hair with a dry brush.
2. Take the trimmer and battery to a service center; Moser requires that batteries only be replaced there.
3. After installation, fully charge the trimmer on its stand before the first contouring.
4. Clean and lubricate the blade after each use, so the battery lasts as long as possible.

For what type of device

For the Moser ChroMini cordless trimmer (1591-0052 and 1591-0057). The ChroMini Pro has a different battery in Moser's list and a different charging stand. Code 1590-7290 does not appear in the list published by Moser, so check the model on the trimmer's label before ordering.

What else you need

• Moser ChroMini Designer Blade 1590-7350
• Blade oil
• Cooling and cleaning spray for blades

ProBeauty tip. If the trimmer doesn't last long even though the battery is new, check the blade. Moser manuals state that if blade maintenance is neglected, the operating time can decrease significantly.

The Moser Li+Pro Mini Motor 1584-7050 is the replacement motor for the Moser Li+Pro Mini trimmer, type 1584. The code prefix, 1584, is the type for the Li+Pro Mini, Moser's corded or cordless trimmer. Replace it when the trimmer no longer starts, runs intermittently, or sounds much louder.

What it does for you

• Clean outlines again: a trimmer needs a motor that pulls consistently.
• Keep the trimmer you know: Moser describes it as very lightweight and quiet, good for fine work.
• Part for the trimmer type: the 1584 code prefix is the type for the Li+Pro Mini.
• Repair, not a new device: the blade, battery, and stand remain, if they are in good condition.

How to use it at home

1. Fully charge the trimmer and clean the blade; a stuck blade can mimic a faulty motor.
2. If it still doesn't work, take the trimmer and motor to an authorized service center.
3. After installation, put a drop of oil on the blade and run the trimmer for a few minutes.
4. Work with short breaks when cutting long hair, so the blade does not overheat.

For what type of device

For the Moser Li+Pro Mini trimmer, type 1584, with a Star Blade II blade. For the Li+Pro² Mini, Moser's list gives a different motor code. The code 1584-7050 does not appear in the list published by Moser, so check the type on the trimmer's label before ordering.

What else you need

• Blade oil
• Blade cooling and cleaning spray
• Haircutting cape

ProBeauty tip. The Moser manual says that a dirty and unlubricated blade significantly shortens the working time. The same blade also strains your motor. Lubricate it after every trim.

The Moser Genio Battery with Circuit 1565-7880 is the battery and electronic board assembly for the Moser Genio hair clipper. The Genio can be used corded or cordless, and the battery provides its cordless runtime. Replace it when the clipper no longer holds a charge or fails to charge at all.

What it does for you

• Cut hair cordlessly again: without a good battery, the Genio remains tethered to the wall outlet.
• One-piece battery and circuit: the service center replaces the entire assembly rather than searching for separate parts.
• Keep your lightweight clipper: Moser describes the Genio as extra-lightweight, making it worth repairing.
• Still works corded: until it is installed, you can continue working with the power supply plugged in.

How to use it at home

1. First, check the clipper's power supply and charging port; dirt on the contacts can also prevent charging.
2. Take the clipper and part to a service center; Moser requires that batteries be replaced only there.
3. After installation, fully charge the clipper before its first use.
4. Clean and lubricate the blade after each use to prevent unnecessary strain on the motor.

For which type of device

For the Moser Genio hair clipper, model 1565, the one with the Magic Blade. It is not for the Genio Plus, which has a different battery listed by Moser, 1854-7988. Code 1565-7880 does not appear in the parts list published by Moser, so check the model on the clipper's label before ordering.

What else you need

• Blade oil
• Blade cooling and cleaning spray
• Hair clipper cape

ProBeauty tip. Store the clipper at room temperature. Moser manuals state that it should not be exposed to extreme cold or high heat for extended periods. Do not leave it in the car during summer or near a heater.

Moser 1400 Complete Housing 1403-7010 is a replacement housing for the Moser 1400 series corded hair clipper. 1403 is the code Moser uses for the 1400 clipper parts in the official parts list. Replace it when the old housing is broken, cracked, or broken at the mounting points.

What it does for you

• The clipper is securely held again: no cracks and no edges that scratch you.
• The mechanism stays enclosed: hair and dust no longer enter through cracks to the coil.
• You don't replace the whole clipper: the blade, coil, and cable remain, if they are in good condition.
• And the switch is available: the Moser list gives the same switch for the 1400 as for the Primat, 1230-7071.

How to use it at home

1. Unplug the clipper and remove the blade.
2. Take a photo of the inside before moving the parts: coil, vibrator, springs, cable.
3. Move the parts into the new housing, in the same position.
4. Close the housing, mount the blade and lubricate it.
5. Turn the clipper on briefly; if it makes a loud noise, adjust the blade as shown in the manual or take it to a service center.

For what type of device

For the Moser 1400 corded hair clipper. The Moser manual covers types 1170, 1400, and 1411 together, but the parts list gives different housings for the 1400 and the 1400 Mini. Therefore, check the type on the clipper label before ordering.

What else you need

• Moser Primat Switch 1230-7071
• Blade oil
• Cooling and cleaning spray for blades
• Hair clipper cape

ProBeauty Tip. On the 1400 clippers, loud noise after assembly usually comes from the blade or its adjustment. The Moser manual explains the adjustment step by step; follow it before you think the part is to blame.

The Moser Class 50 12 V DC 1250-7070 motor is the replacement motor for the Moser Class 50 corded hair clipper. Moser's official parts list includes it for the Class/Max 50 model, type 1250, and the Class 50 manual specifies a 12 V DC motor. Replace it when the old motor no longer starts, overheats, or loses power.

What it does for you

• Your clipper cuts with power again: a new motor restores the power Moser describes for the Class 50.
• Keep the clipper you know: the Class 50 is made, according to Moser, for continuous professional use.
• The correct part number: 1250-7070 is the motor listed in the model's parts list.
• Repair instead of a new device: the housing, cable, and blade remain the same, provided they are in good condition.

How to use it at home

1. First, check the cable, power supply, and outlet: the Class 50 manual lists them as the primary cause when the clipper does not work.
2. Clean and lubricate the blade; a stuck blade strains the motor.
3. If it still does not work, take the clipper and new motor to an authorized service center.
4. After installation, oil the blade and run the clipper for a few minutes as a test.

For what type of device

For the Moser Class 50 corded hair clipper, type 1250, the one with the 49 mm Star Blade. Moser's list groups it with the Max 50 under the same type. It is not the motor for other Moser models, such as the Class 45, which lists a different motor.

Specifications

What else you need

• Blade oil
• Cooling and cleaning spray for blades
• Hair clipper cape

ProBeauty's tip. Motors fail more often when the blade is dull or unsharpened. Along with the motor, check the blade. If it pulls clean and lubricated hair without tugging, replace it too.

Moser Primat 2in1 Lower Housing 1234-7000 is the bottom part of the housing for the Moser Primat 2in1 corded hair clipper. The code 1234 is the Primat 2in1 type, according to the Moser data sheet and manual. Replace it when the lower housing is cracked or broken at the clips.

What it does for you

• The clipper stays securely in your hand: an intact housing no longer wobbles and has no sharp edges.
• The interior stays clean: hair and dust enter the motor through cracks.
• You don't have to replace the whole clipper: Moser describes the Primat 2in1 as a clipper for continuous professional use.
• Part for your clipper type: the 1234 prefix of the code is the same as your clipper type.

How to use it at home

1. Unplug the clipper and remove the blade.
2. Unscrew the screws and note which parts are in the lower housing.
3. Use the brush to clean the hair collected inside.
4. Move the parts into the new housing in the same position, and close the clipper without forcing the screws.
5. Put the blade back, lubricate it, and turn on the clipper for a test.

For what type of device

For the Moser Primat 2in1 corded hair clipper, type 1234, which comes with a standard blade and a fine one for outlining. Moser does not publish a parts list for this model, so check the type on the clipper label. We have no confirmation for the Primat 1230 or other models.

What else you need

• Moser Primat 1230-7590 Upper Housing
• Moser Primat 1230-7071 Switch
• Moser Primat 1230-7720 Blade Guide
• Moser Primat 1230-7730 Balancer
• Blade oil
• Blade cooling and cleaning spray

ProBeauty Tip. When replacing the housing, also clean the cable contacts at the entry. A cable properly secured in the housing does not break at the bends.

The Moser Primat 1230 Balancer 1230-7730 is a moving part of the motor in the Moser Primat hair clipper. After Moser, the Primat has a polarized oscillating armature motor, approximately 3000 rpm. The balancer is the part that oscillates and moves the blade. You replace it when it is worn, cracked, or when the clipper starts to vibrate irregularly.

What it does for you

• The clipper runs quietly again: Moser describes the Primat as very quiet, and a worn balancer ruins exactly that.
• The blade receives the correct movement: the cut becomes clean again, without pulling.
• Part by Moser code: 1230-7730 is listed as a balancer in the Primat 1230 parts list.
• Don't buy another clipper: the Primat is designed for continuous work and can be repaired part by part.

How to use it at home

1. Unplug the clipper and open the blade and housing.
2. Take a photo of the position of the balancer and the springs before you disassemble anything.
3. Mount the new balancer in exactly the same position.
4. Close the clipper, oil the blade, and run a short test.
5. If the clipper buzzes loudly or overheats, stop and take it to an authorized service center.

For what type of device

For the Moser Primat 1230 corded hair clipper, as listed in the Moser parts list. It is a mechanism part, not a replacement accessory between clippers. For the Primat 2in1 or other models, we do not have confirmation from Moser.

Specifications

What else you need

• Guide for Moser Primat 1230-7720 blade
• Moser Primat 1230-7590 upper housing
• Moser Primat 1230-7071 switch
• Moser Primat 1230-7035 pivot set
• Blade oil
• Cooling and cleaning spray for blades

ProBeauty advice. If the clipper has started to buzz louder, check the blade first. A dirty or un-oiled blade strains the motor and resembles a worn part.

Moser Primat 1230 Switch 1230-7071 is the on/off button for the Moser Primat corded hair clipper. The official Moser parts list specifies it for the Primat 1230 and for the 1170 and 1400 clippers. Replace it when the clipper no longer starts reliably or turns off on its own from the button.

What it does for you

• The clipper starts right away: a new switch no longer has loose contacts.
• You work without interruptions: sudden shutdowns in the middle of cutting disappear.
• One part for three models: the same code is listed for the Primat 1230, the 1170, and the 1400.
• A minor repair, not a new clipper: the rest of the clipper remains the one you know.

How to use it at home

1. First, check the cable and the socket: a clipper that doesn't start doesn't always have a faulty switch.
2. Unplug the clipper and open the housing, with the blade removed.
3. Note down or photograph how the wires are connected to the old switch.
4. Mount the new switch in exactly the same position and close the housing.
5. If you haven't worked with electrical parts before, leave the installation to an authorized service center.

For what type of device

For the Moser Primat 1230 corded clipper and, according to the Moser parts list, for the Moser 1170 and 1400 clippers. It is not a part for cordless clippers. For another model, check the code on the clipper's label before ordering.

Specifications

What else you need

• Moser Primat 1230 Upper Housing 1230-7590
• Moser Primat 2in1 Lower Housing 1234-7000
• Moser Primat 1230 Blade Guide 1230-7720
• Moser Primat 1230 Balancer 1230-7730
• Blade Oil
• Blade Cooling and Cleaning Spray

ProBeauty Tip. Moser manuals state that electrical repairs should only be carried out by specialists using original parts. The switch involves live wires, so a service center is the safe choice.