Up to 55% Off Appliances

Wahl No. 5 Black 16 mm Guard is the standard Wahl 16 mm guard, sold separately. Wahl says that No. 5 leaves approximately 16 mm of hair, for a longer crew cut and for fade haircuts. Get it to replace a lost or broken one, or to have a second one on hand.

What it does for you

• Cuts uniformly at 16 mm over the entire area you pass over with the machine.
• Use it for a longer crew cut and fade haircuts.
• Complete the set without having to buy all 8 guards again.
• Works on several Wahl machines: the brand lists it as compatible with 8 models, from the Super Taper to the Balding.

How to use it at home

1. Stop the machine and brush the hair off the blade.
2. Place the guard on the blade and press until it clicks into place. Check that it is secure before you start.
3. Cut against the direction of hair growth, with even strokes.
4. Pass over the same area several times to catch the lying hairs.
5. After cutting, clean it with a small brush. From time to time, wash it with warm water and mild soap and let it dry completely.

For what type of machine

Wahl lists it as compatible with the Super Taper, Super Taper Cordless, Legend, Legend Cordless, Senior Cordless, Magic Clip, Magic Clip Cordless, and Balding. You receive a single guard, not a set. It is not for outline machines or for machines with slide-on guards, such as the Kuno or ChromStyle.

Specifications

What else you need

• Wahl No. 4 guard, shorter
• Wahl No. 6 guard, longer
• Complete Wahl Premium guard set
• Wahl Magic Clip Cordless hair clipper
• Wahl oil for hair clipper blades

ProBeauty tip. For a long fade, use No. 5 on the top of the sides and No. 4 (13 mm) lower down. Short strokes, upwards and outwards.

The Wahl Balding Replacement Blade is the blade for the Wahl Balding clipper. It has trimmer-like teeth and a cutting length of 0.5 mm, for bald heads and skin fades. It is adjusted to zero overlap, so you can work very close to the skin.

What it does for you

• Bald head and skin fade: Wahl designed it for bald fades and skin fades.
• Short, clean cut: the trimmer-like teeth cut at 0.5 mm.
• Zero control: it is adjusted to zero overlap for results close to the skin.
• Quickly cover the head: the cutting width is 46 mm.
• Ready to install: comes with oil and screws, according to Wahl UK.

How to use it at home

1. Turn off the clipper and unplug it or remove it from the charging station.
2. Unscrew the screws on the old blade and remove it.
3. Place the new blade on the clipper head, with the adjustment lever caught in the moving blade.
4. Put the screws back in place and tighten them just enough so that you can still move the blade.
5. Align the blades: the moving blade must not protrude in front of the fixed blade. Only then tighten the screws completely.
6. Put a few drops of oil on the teeth and turn on the clipper for a few seconds.

For what type of device

For the Wahl Balding clipper, according to Wahl Europe and Wahl UK. It is the blade for bald heads, skin fades, and the shortest area of a fade. It is not a general-purpose cutting blade or for long hair.

Specifications

What else you need

• Wahl Balding Clipper
• Wahl Guard for the Balding Clipper
• Wahl Oil for lubricating the blades
• Wahl Blade Ice Spray that cools and cleans the blades

ProBeauty Tip. For a bald head, first pass the clipper in the direction of hair growth, then in the opposite direction. The first pass removes the bulk, the second leaves the skin smooth without insisting on the same area.

High-quality cotton towel, black, is ideal for any salon, barbershop, or for personal use at home. Dimensions: 94x48cm

The Wahl Pro Shine Curling Tong 16 mm is the clip-on curling iron with a 16 mm barrel from the Pro Shine series. The barrel has a keratin-infused ceramic coating, and the temperature is digitally adjustable between 80 and 210 °C. It heats up in 60 seconds. Wahl designed it for tight curls, like elastic rings.

What it does for you

• Tight curls, like elastic rings, with a 16 mm barrel.
• Less heat on fine hair: choose a low temperature without compromising on results.
• Shinier and silkier hair, thanks to the keratin-infused ceramic coating.
• Glides easily through hair, without snagging or pulling strands.
• Uniform curls: the clip holds the section firmly as you curl it.
• Elastic hair rings, which hold their shape.

How to use it at home

1. Start with clean and completely dry hair. Apply a heat protectant spray.
2. Choose the temperature: lower for fine or sensitized hair, higher for thick hair.
3. Secure the hair in the clip and work from the bottom up, on small sections.
4. Wrap the section around the barrel and hold it for 8–12 seconds, as recommended by the Wahl styling guide.
5. Release the curl and let it cool completely before touching it.
6. Finally, place the device in the silicone cover only after it has cooled down.

For what type of hair

For short, medium, or long hair when you want small, elastic curls. For fine hair, start with a low temperature. If you want wider curls or waves, a 25 or 32 mm barrel will suit you better.

Specifications

What else you need

• Wella EIMI Thermal Image Heat Protectant Spray
• Hair Sectioning Clips
• Milk Shake Eco Strong Hairspray, for holding curls
• GA.MA Universal Stand for Styling Tools

ProBeauty Tip. Keep the sections small, about the width of the barrel: the rings will be tighter and more uniform. After the curls have cooled, separate them with your fingers and secure them with a little hairspray.

The Wahl Pro Shine Curling Tong 32 mm is the 32 mm clamp and barrel curler from the Pro Shine series. The barrel has a keratin-infused ceramic coating, and the temperature is digitally adjustable between 80 and 210 °C. It heats up in 60 seconds. Wahl designed it for loose waves and large curls.

What it does for you

• Loose waves and large curls with a 32 mm barrel.
• Less heat on fine hair: choose a low temperature without compromising on results.
• Shinier, silkier hair thanks to the keratin-infused ceramic coating.
• Glides easily through hair without snagging or pulling strands.
• Uniform curls: the clamp holds the section firmly as you curl it.
• Extra-long barrel designed for long hair: achieve curls in fewer passes.

How to use it at home

1. Start with clean, completely dry hair. Apply a heat protectant spray.
2. Choose the temperature: lower for fine or sensitized hair, higher for thick hair.
3. Secure the hair in the clamp and work from the bottom up, taking small sections.
4. Wrap the section around the barrel and hold it for 6–8 seconds, as recommended by the Wahl styling guide.
5. Release the curl and let it cool completely before touching it.
6. Finally, place the device in the silicone cover only after it has cooled.

For what hair type

For medium and long hair, especially long hair, for which Wahl designed the extra-long barrel. On short hair, the 32 mm diameter provides more volume than curls. If you want tight curls, choose 16 or 19 mm.

Specifications

What else you need

• Sensus Heat Shield Heat Protectant Spray
• Hair Sectioning Clips
• Milk Shake Let It Shine Shine Spray
• Milk Shake Eco Strong Hairspray for Holding Curls

ProBeauty Tip. For beach waves, leave a few centimeters of the ends out of the barrel and alternate the direction of the curl. Once cooled, loosen the curls with your fingers: the waves will look relaxed, not styled.

The Moser 1400 Mini Corded Trimmer 1411-0050 is the compact version of the classic Moser 1400, designed for outlining and finishing. It features a STAR BLADE stainless steel blade made in Germany, an oscillating motor for continuous use, and weighs approximately 190 g. It is burgundy.

What it does for you

• Close-to-skin outlining: the 32 mm blade cuts at 0.3 mm.
• Continuous use, with a polarized oscillating motor running at approximately 3000 rpm.
• Quiet and powerful, with the new motor from the 1400 Mini range.
• Always ready to use: it is corded and does not require a battery.
• Small and lightweight, making it easy to maneuver around the ears and neck.

How to use it at home

1. Apply a drop of oil to the blade and run the trimmer for a few seconds.
2. For the hairline and sideburns, hold the blade perpendicular to the skin.
3. For a short beard, attach the comb.
4. Work in short strokes without applying pressure.
5. When finished, unplug the trimmer, clean the blade with the brush, and oil it.

What it is best suited for

For outlining, the neck, sideburns, mustache, and finishing, whether at the barbershop or at home. It pairs well with a Moser 1400 hair clipper for detailing. To cut all the hair on your head, you need a hair clipper with a wide blade.

Specifications

What else you need

• Wahl blade oil
• Wahl Blade Ice spray for cooling the blades
• Wahl neck strip
• Wahl striped barber cape

ProBeauty tip. For a straight hairline, first draw the line lightly with the corner of the blade, like a pencil. Only then clear the area beneath it using the full width of the blade.

The Moser Primat Mini Corded Trimmer 1411-0052 is Moser's small trimmer in titanium, with an oscillating motor for continuous use. It has a STAR BLADE stainless steel blade, made in Germany, which cuts at 0.3 mm, and weighs approximately 190 g.

What it does for you

• Close-to-skin contouring: the 32 mm blade cuts at 0.3 mm.
• Work without breaks: the polarized oscillating motor is made for continuous use.
• Runs quietly and smoothly, so it is pleasant for the client too.
• Never leaves you halfway: it is corded, without a battery to charge.
• Durable blade, made of precision-sharpened stainless steel.

How to use it at home

1. Put a drop of oil on the blade and run the machine for a few seconds.
2. For contouring, hold the blade perpendicular to the skin and work with short strokes.
3. For a short beard, attach the comb.
4. Keep the cable behind the hand, so it does not get tangled near the ear.
5. After use, unplug the machine, clean the blade with the brush, and oil it.

For what type of work

For contours, necklines, sideburns, mustaches, and finishing, in the barbershop or at home. It is suitable if you want a simple, corded machine that never runs out of power. For cutting the whole head, you need a hair clipper with a wide blade.

Specifications

What else you need

• Wahl oil for blades
• Wahl Blade Ice spray for cooling the blades
• Wahl neck strip
• Wahl cutting cape

ProBeauty tip. Machines with an oscillating motor heat up slightly after prolonged use. Oil the blade between clients: the oil reduces friction and keeps the blade cooler on the client's skin.

BaBylissPRO High Performance 28mm Curling Wand effortlessly creates beautiful curls and natural-looking waves. The ceramic coating ensures even heat distribution and helps protect the hair from heat-related damage. With a 28mm diameter, this curling wand is ideal for creating medium to large curls, delivering a natural, voluminous finish. The ergonomic handle ensures comfortable use, while rapid heat-up saves valuable styling time. Suitable for all hair types and lengths.

Key Features

• Ceramic coating for even heat distribution
• 28mm diameter for natural curls and beach waves
• Fast heat-up for efficient styling
• Ergonomic handle for enhanced comfort
• Helps protect hair from overheating
• Suitable for all hair types
• Professional results at home

The JRL Forte Pro Lite 2020L is a lightweight, black hair dryer weighing 390 g, with 2400 W and a 20500 rpm motor. JRL UK also sells it under the name Forte Pro Feather. It is for you if you dry your hair often and want a device that won't tire your hand.

What it does for you

• Dries quickly: 2400 W and the Turbo function, which increases airflow.
• Your hand gets tired less easily: the dryer weighs only 390 g.
• Smoother and shinier hair: negative ions and graphene heating elements help achieve a smooth, shiny result.
• You control the heat: 2 speeds, 2 temperatures, and cool air for setting.
• You work more quietly: JRL describes it as a low-noise dryer.
• Motor made to last: lifespan of up to 5000 hours.

How to use it at home

1. Towel-dry your hair thoroughly before turning on the dryer.
2. Apply a heat protection spray to the lengths.
3. Dry the roots on high speed with the nozzle removed to remove moisture quickly.
4. For blow-drying, attach the concentrator and work in sections with a round brush.
5. Use the Turbo function only for quick drying, not on already dry ends.
6. Finish with cool air to set the style.

For what hair type

JRL does not link it to a specific hair type. It is lightweight, so it is good for drying a lot or daily, on short or long hair. It has 2 temperature settings, not 3: on very fine or bleached hair, use the low setting. It does not come with a diffuser, so for defined curls you will need a separate diffuser.

Specifications

What else you need

• White JRL x Lamborghini Forte Pro Lite 2020L Hair Dryer
• Wella EIMI Thermal Image Heat Protection Spray
• Olivia Garden Nano Thermic 55 Round Brush for Blow-Drying
• ETB Hair 43 mm Round Brush
• ETB Hair Paddle Brush for Detangling
• ETB Hair Stylesse Shield Smooth Heat Protection Spray

ProBeauty Tip. Hold the concentrator a few centimeters from the hair and direct the air from the roots to the ends. This smooths the cuticle and makes the hair shinier.

Attention! The product may have opened or damaged packaging and may show minor signs of use or small scratches that do not affect its functionality!

Top performance, absolute precision, and total freedom! With the new BaByliss PRO FXONE Shaver FX79FSMBE, personal care reaches a superior level – a professional shaver, designed for those who demand impeccable results with every use.

Equipped with a lithium battery compatible with all FXONE devices, this appliance is part of a revolutionary ecosystem from BaBylissPRO. You only need one battery for all tools in the FXONE range – an intelligent solution for dynamic professionals passionate about efficiency.

The FXONE shaver offers an ultra-smooth shave with millimeter precision and a compact, ergonomic design that fits perfectly in the palm of your hand. The high-performance shaving head glides gently over the skin, reducing irritation and providing an impeccable finish – ideal for contours, fine details, and daily beard or scalp maintenance.

What the complete set contains:
– FXONE shaver with elegant housing, matte black finish
– Interchangeable lithium battery, compatible with all FXONE devices
– Charging stand included – compact, stable, and easy to use

Benefits:
– 100% compatibility with all FXONE tools
– Long-lasting battery with consistent performance
– Ergonomic design, ideal for professional or personal use
– Quick response to the needs of modern barbers – versatility, comfort, and power in one product

BaByliss PRO FXONE is not just a shaver – it's a top-tier technological experience, where every detail is designed for performance, comfort, and precision.

Attention! The product may have an opened or damaged packaging and may show minor signs of use or small scratches that do not affect its functionality!

With BabylissPro 3D Wave 19mm, get natural and voluminous curls in record time! This multifunctional triple curler is designed to create long-lasting curls with a professional finish and an elegant look, thanks to its 3 heating elements that allow for faster and more efficient curl formation.

Key Features:

• 19mm Titanium-Tourmaline Technology – Ensures quick and efficient heating, protecting hair and giving it a natural shine.
• Ionic Technology – Eliminates static electricity, leaves hair silky, and combats frizz.
• Digital Temperature Control – 5 temperature settings, from 150°C to 210°C, perfect for all hair types.
• High Heat for Lasting Curls – Suitable for medium and long hair, for a uniform and durable result.
• 2.7 m Professional Cable – Provides freedom of movement during styling.

Why choose BabylissPro 3D Wave 19mm?

• Voluminous and Natural Curls – The triple curler is specially designed to provide a natural look and long-lasting hold.
• Easy to Use – The ergonomic design and evenly distributed heat make styling simpler and faster, even for long hair.
• Professional Performance at Home – Perfect for salons and personal use, delivering quality results without compromise.

Transform your hair with BabylissPro 3D Wave 19mm, the ideal choice for elegant curls and volume, every time!

Attention! The product may have opened or damaged packaging and may show minor signs of use or small scratches that do not affect its functionality!

Transform your hairstyle with BabylissPro Triple Barrel 22mm/19mm/22mm, the professional triple curling iron specially designed for defined curls and long-lasting waves. Thanks to its three heating barrels and advanced technology, this curling iron is perfect for impactful hairstyles, without the risk of hair damage.

Key features:

• 3 heating barrels (22mm/19mm/22mm) – Ideal for voluminous curls and effective waves that last all day.
• Adjustable temperature control (140°C - 220°C) – Suitable for all hair types, offering protection and personalized styling.
• Automatic shut-off function after 60 minutes – Enhanced safety, ideal for intensive use in the salon or at home.
• Insulated tip and 2.7m swivel cord – The secure handle and rotating cord offer comfort in use and increased maneuverability.

Benefits of BabylissPro Triple Barrel:

• Long-lasting and natural curls – Creates long-lasting waves, keeping hair smooth and shiny.
• Ideal for professionals and personal use – Advanced temperature control and ergonomic design ensure professional results with every use.
• Accessories included for protection and comfort – The set includes heat-protective gloves and a heat-insulating mat for safe styling.

🪒 Say goodbye to uncomfortable shaving, and welcome top performance!
Discover GA.MA Absolute, the professional shaver created for barbers who want speed, precision, and comfort in a single device. With a super-powerful motor of 6800 revolutions/minute, a generous autonomy of 90 minutes, and a weight of just 139g, this device becomes the perfect ally for intense styling sessions.

⚡ Power and performance in your palm
• Ultra-fast DC motor – 6800 RPM
• Oscillating titanium blades – 0.1 mm cut, ideal for a smooth and clean shave
• Compact, portable, and lightweight design – only 139g
• Autonomy: up to 90 minutes with a full charge (120 min)
• Quiet: only 60 dB – perfect for professional and home use

💼 The package content includes everything you need:
✔️ GA.MA Absolute shaver
✔️ Power cable and adapter
✔️ Cleaning brush and maintenance oil
✔️ Blade protection
✔️ Clear instructions for use

🛠️ Easy maintenance, guaranteed durability
Regularly clean the blades with the included brush, use professional sprays or oils to keep the device in perfect condition. Do not use it near water and keep it away from children.

🔒 Safety and warranty
The product complies with all safety standards (DIRECTIVE 89/336/EEC) and comes with a 12-month warranty.

💡 Recommended for:
✔️ Professional barbers
✔️ Home use, with salon-quality results
✔️ Beard, mustache, contour, and full shave

🎯 If you want a precise, durable, and fast shaver, the ideal choice is GA.MA Absolute – created for uncompromising performance!

💨 Fast, precise, and gentle with your hair! With GA.MA IQ Lite Max, professional styling becomes easier than ever! This revolutionary hairdryer weighs only 314g and combines state-of-the-art technology with digital performance, delivering salon-worthy results right in your home or professional studio.

🔬 Innovative technologies for your hair's health:
• Venturi Effect: Concentrated and fast airflow, even without accessories
• Oxy-Active Technology: Antioxidant protection and natural shine – closes the cuticle and keeps hair healthy
• System C: Uniform heat distribution for safe and efficient drying

🔥 Top performance:
• Power: 1700W
• 32mm digital motor with 85,000 RPM
• Pressure: 500 mmH₂O
• Airflow: 75 m³/h (without accessories)
• Noise level: only 81 dB – quiet and comfortable
• 3 temperature settings + 2 speeds + cool shot button
• Weight: only 314g – ultra-light for fatigue-free styling sessions
• Compact dimensions: 16.5 x 19.5 x 4.8 cm

🧰 Included accessories for complete styling:
• 2 professional concentrators (6.35 cm & 9.15 cm)
• 1 deep diffuser (Ø13.03 cm) – ideal for curls and volume
• Complete care kit: anti-slip pad, cleaning cloth, and brush
• 3 spare filters (mesh) for optimal maintenance
• External metallic filter with micro-perforations (Snap Lock)

🔌 Enhanced comfort in use:
• Hanging hook – easy to store
• 3-meter professional cable – total freedom of movement
• Intuitive interface with 2 durable mechanical switches

🎯 Recommended for:
• Professional stylists looking for reliability and technology
• Home users who want quick results without hair damage
• All hair types and textures

💡 Why choose GA.MA IQ Lite Max?
Because it is light, powerful, smart, and safe for hair. It's the ideal companion for efficient styling, without compromise – whether you're at home or in a top salon.

Discover the new GA.MA Lumine PI5010 hair straightener, a reliable ally in your beauty ritual, specially created for professional performance at home or in the salon! Equipped with state-of-the-art technologies – Plasma, Bizona, and Nano Silver, this straightener completely transforms the styling experience, offering spectacular results and protecting hair health.

💫 Plasma Technology – for revitalized hair
This technology releases over 10 million active ions (positive and negative) and ozone, penetrating deep into the hair shaft. The result? Perfectly straightened hair, silky, luminous, and visibly healthier! The ions contribute to the molecular reconstruction of the hair, reduce frizz, and prevent damage.

🔥 Bizona System + IHT Sensors – fast and even heating
With 4 intelligent sensors ensuring perfect heat distribution across the entire surface of the plates, styling time is significantly reduced. IHT (Instant Heat Technology) allows the desired temperature to be reached in just 15 seconds, for styling without waiting!

🖤 Black Titanium Plates – ultra-resistant, ideal for daily use
Made from professional-grade titanium, the plates are coated with Nano Silver particles that have a powerful antibacterial effect, maintaining high hygiene. These reduce friction, protect the hair, and ensure a smooth glide, even on unruly hair.

🎯 Adjustable temperature between 160°C and 235°C
You can adjust the temperature according to your hair type, whether it's fine, normal, or thick. The digital display gives you total control and precision with every use.

🛡️ Ultimate safety and comfort
The straightener is equipped with an auto-off function after 60 minutes, a suspension system that prevents unnecessary thermal stress on the hair, and a 3-meter swivel cord with a hanging loop, for total freedom of movement.

🌍 Perfect for travel – thanks to its dual voltage (110-240V), it can be used anywhere in the world!

Plate dimensions: 27 x 110 mm
Weight: 250 g
Power consumption: 50W
Ideal for: daily use, beauty salons, professional hair straightening and smoothing

Number of LEDs: 6

Can be manually switched on and off Default time setting of 45s Time setting to 60s Charging via Micro USB cable

Color: pink

Number of LEDs: 6 Can be turned on and off manually Default time setting of 45s Time setting to 60s Charging via Micro USB cable

Color: white

The JRL Onyx 2020T is the cordless outliner from the Onyx line, the companion to the Onyx 2020C hair clipper. It features a T-shaped Onyx EZ-GAP blade with 360° visibility, an 8200 rpm motor, and up to 3.5 hours of runtime. It’s for you if you want clean lines, a defined beard outline, and fine detailing.

What it does for you

• Tool-free zero-gap: the EZ-GAP blade is adjustable without tools, for lines that sit very close to the skin.
• See the whole blade: it offers 360° visibility, ideal for outlines, corners, and designs.
• Doesn’t pull hair: Smart-Clip increases the speed when it detects resistance, even in thick hair.
• Fast motor, 8200 rpm, with a lifespan of up to 1000 hours.
• Long runtime: up to 3.5 hours on a single charge.

How to use it at home

1. Charge it on the stand before first use.
2. Apply a drop of oil to the blade and run it for a few seconds.
3. Comb the area and visually establish the line before cutting.
4. Outline with short strokes, holding the blade perpendicular to the skin.
5. For the beard, stretch the skin with your free hand.
6. Finally, brush away the hair and re-oil the blade.

What it’s designed for

It’s for outlines, the beard line, the neck, temples, hair designs, and dry shaving. It’s not designed for cutting the whole head. For volume and fades, use a hair clipper such as the Onyx 2020C.

Specifications

What else you need

• JRL Onyx 2020C Hair Clipper
• Blade Oil
• Blade Cooling and Cleaning Spray
• Hairdressing Cutting Cape
• Fade Brush

ProBeauty Tip. When outlining the beard, always work from the cheek toward the neck, never the other way around. The line will stay lower and look more natural.

The Panasonic Professional WER9P10 is a narrow 10 mm replacement blade for Panasonic professional trimmers. Panasonic lists it for the ER-PA11 and also includes it in the replacement parts for the ER-GP22 trimmer. It is a blade for fine lines, not for trimming large areas.

What it does for you

• Reach small areas: the narrow 10 mm blade fits into corners and around the ear.
• Clean lines: The ER-GP22, which it is listed for, has an additional blade for precise lines and styling.
• Original part: the WER-9P10 code belongs to Panasonic, not a copy.
• No need to replace the trimmer: you only replace the narrow blade when it becomes dull.

How to use it at home

1. Turn off the trimmer and remove it from the charging stand.
2. Remove the old narrow blade as shown in the trimmer manual.
3. Brush out any hair left in the blade.
4. Mount the new blade and check that it is not loose.
5. Put a drop of oil on the teeth and turn the trimmer on briefly.

For what type of machine

Panasonic lists it for the ER-PA11 trimmer and includes it in the accessories for the ER-GP22 trimmer. It is not the main blade of the ER-GP21 or ER-GP22. That one has a different code, WER9352.

Specifications

What else you need

• Oil for hair clipper blades
• Spray that cools and cleans the blades
• 4-in-1 spray for hair clipper maintenance

ProBeauty tip. With a narrow blade, work with short strokes on skin stretched with the other hand. This way, the line comes out straight and you do not press multiple times on the same area.

The Wahl Hair Dryer Holder 0093-6530 is a simple holder made of silver brushed steel for your hair dryer. It weighs only 160 g and keeps your hair dryer within easy reach without taking up space on the work table.

What it does for you

• Clears the work table: the hair dryer no longer lies flat among brushes, clips, and products.
• Keeps the hair dryer in the same place, so you can grab it instinctively without having to look for it.
• Lasts over time, as it is made of brushed steel, which is easy to clean.
• Takes up little space: it is small, lightweight, and has a subtle silver shade.
• Protects the hair dryer from falling off the edge of the table.

How to use it at home

1. Choose a place near the outlet where you use the hair dryer, away from the sink.
2. Place or secure the holder firmly in the chosen spot and check that it does not move.
3. Before turning off the hair dryer, hold it on cool air for a few seconds, then turn it off and place it in the holder.
4. Loosely gather the cord without wrapping it tightly around the hair dryer.
5. Wipe the holder occasionally with a dry cloth.

For what type of hair dryer

It is a general holder for salon or home hair dryers. Wahl does not publish a list of compatible models, so check the shape and size of your hair dryer before purchasing. It is not a holder for hot plates or curling irons.

Specifications

What else you need

• Wahl Ventus Pro Hair Dryer
• Wahl Protect Hair Dryer
• Wahl Super Dry Hair Dryer

ProBeauty Tip. Place the holder on the side of the hand you use to hold the hair dryer. You can set it down and pick it up in a single motion without reaching over the client.

Discover the BaByliss PRO SnapFX Cordless Clipper - Professional Performance at Your Fingertips

The BaByliss PRO SnapFX clipper is the ideal high-performance tool for achieving professional haircuts, whether you're at home or in a salon. Combining advanced technology with an ergonomic design, this clipper allows you to create precise and uniform hairstyles with ease and comfort.

Key Features:

• Powerful Brushless Motor: Equipped with a digital brushless motor, this clipper offers a powerful torque of 6800RPM, ensuring power and speed for precise and efficient cuts.
• Fast Charging and Dual Battery System: The two lithium-ion batteries fully charge in just 3 hours when placed together on the charging stand. Additionally, a single battery charges in just 2 hours, ensuring you'll never run out of power. Each battery provides 2 hours of runtime, guaranteeing continuous and uninterrupted operation.
• Robust and Ergonomic Design: The robust metal construction is built to last, while the ergonomic and balanced design provides a perfect grip and excellent control.
• High-Precision DLC Fade Blade: The sharp black DLC blade is ideal for fades and precise cuts. Adjustable to zero gap and equipped with a smart opening system, it allows for quick and easy maintenance.

Benefits of the BaByliss PRO SnapFX Clipper:

• Power and Speed: The digital brushless motor delivers superior performance, ensuring fast and precise cuts for any hair type.
• Unlimited Runtime: Thanks to the dual interchangeable battery system, you will benefit from continuous, uninterrupted runtime. One battery charges while the other is in use, giving you a worry-free clipping experience.
• Ergonomic and Durable Design: The robust and ergonomic construction offers comfort and long-term durability, making it ideal for intensive daily use.
• Maximum Versatility: With a complete set of comb attachments and an adjustable blade, this clipper is perfect for any haircut style, from classic cuts to complex fades.

Technical Specifications:

• Runtime: Each battery provides 2 hours of use.
• Charging Time: 2 hours for a single battery, 3 hours for both batteries on the charging stand.
• Fade Blade: Adjustable to zero gap, with smart opening system for easy maintenance.
• Battery System: Two interchangeable lithium-ion batteries.
• Light Indicator: Light ring for battery charge level (solid blue for full battery, flashing blue for low battery, flashing red for almost discharged battery).
• Adjustment Lever: 5 detent cutting positions: 0.8, 1.4, 2, 2.8, 3.5mm.
• Metal Construction: Robust, ergonomic, and balanced design, with a textured cylindrical handle for a perfect grip.
• Comb Attachment Set: 8 premium comb attachments (0.5, 1, 1.5, 2, 3, 4, 5, 6mm) with fiberglass for durability and metal clips for secure fastening.

Purchase the BaByliss PRO SnapFX

Unleash your creativity and showcase your talent with the BaByliss PRO SnapFX. Exceptional cutting performance and unlimited runtime take the art of hairdressing to the next level. Don't miss the opportunity to offer your clients the best results and elevate your services to a superior professional level.

The BaByliss PRO M4053E Barber Towel is the essential towel for the barber station. Use it to prepare the beard before edging or shaving and to clean up after a cut. It is a simple accessory that complements the BaByliss PRO tools on your table.

What it does for you

• Prepares the beard before edging or shaving, as recommended by the official distributor.
• Keeps the client's neck clean by wiping away cut hair after each pass.
• Protects the collar if placed on the shoulders under the cape.
• Completes the workstation alongside the shaver and edger.

How to use it at home

1. Place the towel on the client's shoulders under the cape before cutting.
2. For the beard, use it to prepare the area before edging or shaving.
3. Between passes, gently wipe cut hair from the neck and cheeks.
4. After each client, put the towel in the wash and use a clean one.
5. Wash it according to the instructions on the label and let it dry completely.

For what type of work

It is suitable for barbers and those who cut or style their beards at home. It does not replace the cutting cape but complements it. If you need towels for dyeing, choose ones that you do not mind getting stained.

What else you need

• BaByliss PRO FX3 Double Foil Shaver
• SkeletonFX GoldFX Edger
• Wahl Cutting Cape
• BaByliss PRO 4-in-1 Blade Spray

ProBeauty Tip. Keep at least two towels at the station, one for the beard and one for the neck. This prevents cut hair from getting back on the client's face.

BaByliss PRO FX8700GBASE is a charging base for metal FX clippers with a hanging ring: ChameleonFX FX8700IE, RedFX FX8700RE, and BlackFX FX8700BKE. The brand designed it for barbers who don't hang up their clippers. It keeps the clipper upright on the counter and charges it using the adapter supplied with the clipper.

What it does for you

• The clipper no longer falls off the counter: the base is solid, balanced, and stable.
• It stands upright and securely while charging.
• You charge it easily, without hanging it or leaving it lying down next to the cable.
• Your clipper is always charged and within reach at your workstation.

How to use it at home

1. Check the list below to make sure your clipper is a compatible model.
2. Place the base on a flat, stable surface near an outlet.
3. Connect the adapter supplied with the clipper, then plug it in.
4. Place the clipper in the base, upright, and check that it stands securely.
5. When moving the base, first unplug the adapter.

For what type of device

BaByliss PRO lists it as compatible only with the FX clippers with a hanging ring: ChameleonFX FX8700IE, RedFX FX8700RE, and BlackFX FX8700BKE. The GoldFX FX8700GE clipper and Boost+ clippers are not listed by the brand; separate bases are available for the Boost+. It is not designed for edgers.

Specifications

What else you need

• BaByliss PRO FXPCGE 8-piece guard set for FX8700
• BaByliss PRO FX4in1 blade maintenance spray
• Wahl clipper blade oil
• BaByliss PRO M3969E magnetic mat for your workstation

ProBeauty tip. Before ordering, check the code on your clipper's label: the base is listed only for FX8700IE, FX8700RE, and FX8700BKE. If you have a different FX8700 clipper, look for the base designed for it.

BaByliss PRO Graphite Taper FX803BME is a 45 mm replacement blade for FX8700, LO-PROFX FX825, and SnapFX FX895E clippers. The blade has a crescent shape that supports a natural back-and-forth motion when cutting. It is suitable for fades and clean finishes.

What it does for you

• Makes fades easier: the crescent shape follows the back-and-forth motion of your hand.
• Cuts cleanly and precisely across its entire 45 mm width.
• Heats up less: the graphite coating reduces friction and keeps the blade at a lower temperature.
• Is highly durable, as the graphite is a very durable coating, according to the brand.
• Can be adjusted to zero-gap for very short cuts.

How to use it at home

1. Turn off the clippers and raise the fine adjustment lever on the left to the top position.
2. Loosen the screws with a screwdriver and set them aside.
3. Gently lift the old moving blade and replace it with the new one on the oscillator.
4. Install the new fixed blade and center the moving blade parallel to it to avoid the risk of injury.
5. Reattach the screws.
6. Clean and maintain the blade regularly with BaByliss PRO 4-in-1 spray, as recommended by the brand.

For which type of clipper

It fits clippers from the FX8700 series (ChromFX, Boost+), LO-PROFX FX825, and SnapFX FX895E, as well as other clippers with a 2-hole blade system. It is not for SkeletonFX trimmers, which use 40 mm T-blades.

Specifications

What else you need

• BaByliss PRO Boost+ Metal Gold FX8700GBPE Clippers
• BaByliss PRO SnapFX FX895E Clippers
• BaByliss PRO 4-in-1 Blade Care Spray
• Wahl Blade Lubricating Oil, 100 ml

ProBeauty Tip. Let your wrist follow the curve of the blade: use short, arcing, bottom-to-top motions. This way, you make full use of the crescent shape without pressing the clipper against your head.

BaByliss PRO Graphite Fade FX8010BME is a 45 mm graphite-coated replacement fade blade for hair clippers in the FX8700 and LO-PROFX FX825E series. The cutting surface is flat and elongated, designed for vertical movement. It is ideal for fades and clean cuts.

What it does for you

• Cuts cleanly and precisely across its entire 45 mm width.
• Glides very smoothly: the graphite coating creates very little friction.
• Does not overheat because the blade operates at a lower temperature.
• Makes a quieter sound when cutting, according to the brand.
• Highly durable, as graphite is a very resilient coating.

How to use it at home

1. Turn off the hair clipper and set the fine adjustment lever on the left to the top position.
2. Loosen the screws with a screwdriver and set them aside.
3. Lift the old moving blade slightly and replace it with the new one on the oscillator.
4. Place the new fixed blade with the moving blade centered and parallel to it to avoid injury.
5. Secure the screws back in place.
6. Clean and maintain the blade regularly with BaByliss PRO 4-in-1 spray before and during use.

For which type of clipper

It fits hair clippers in the FX8700 (ChromFX, Boost+) and LO-PROFX FX825E series, as well as other clippers with a 2-hole blade system. It is not designed for SkeletonFX trimmers, which use 40 mm T-blades.

Specifications

What else you need

• BaByliss PRO Boost+ Metal Gold FX8700GBPE Hair Clipper
• BaByliss PRO ChromFX FX8700E Hair Clipper
• BaByliss PRO 4-in-1 Blade Care Spray
• Wahl Blade Lubricating Oil, 100 ml

ProBeauty Tip. If you cut many clients in a row, the graphite blade stays cooler, but it still needs spray between clients: spray it, let the clipper run for a few seconds, and wipe off the excess.

The BaByliss PRO M1344E Hair Straightener Case is where you keep your hair straightener between uses. It keeps it safe from dust and bumps, whether in a drawer or in your luggage. It is a storage accessory: it does not cool the straightener and does not replace the heat pad.

What it does for you

• The straightener stays protected from dust between uses.
• The plates won't get scratched by other objects in the drawer or bag.
• It's easy to take with you on trips, without having to figure out how to pack it.
• The cord and straightener stay together, ready to use next time.

How to use it at home

1. After styling, turn off the straightener and unplug it.
2. Let it cool completely on a heat-resistant surface.
3. Close the plates and lock them with the locking system, if the straightener has one.
4. Neatly coil the cord without bending it where it exits the straightener.
5. Place the straightener in the case and keep it in a dry place.

For what type of device

For hair straighteners, according to the product name. The brand does not publish the case dimensions, so we cannot guarantee that every model will fit. If you have a wide straightener, over 30 mm, write us the model and we will check before you order.

What else you need

• BaByliss PRO Elipsis 3000 Professional Hair Straightener
• BaByliss PRO Elipsis 3100 Hair Straightener
• Osis+ Flatliner Heat Protection Serum

ProBeauty Tip. The cord most often breaks where it exits the straightener. When you put the straightener in the case, make a loose loop with the cord, do not wrap it tightly around it.

The Panasonic Professional WER9340 is the original replacement blade for the Panasonic ER-RZ10 clipper. Install it when the old blade no longer cuts cleanly. The clipper remains the same; only the cutting part is new.

What it does for you

• Clean cut again: a new blade catches the hair on the first pass without pulling it.
• Original Panasonic part: WER9340 is the code assigned by Panasonic for the ER-RZ10.
• No need to replace the entire clipper: replace only the worn blade and keep the device you know.
• Stress-free use on the skin: dull blades pull the hair, while new ones glide more easily.

How to use it at home

1. Turn off the clipper and unplug it or remove it from the charging stand.
2. Remove the old blade exactly as shown in the ER-RZ10 clipper manual.
3. Use the small brush to remove any hair left in the blade holder.
4. Mount the new blade in the same position and make sure it is securely fixed, without any play.
5. Apply a drop of oil to the teeth and turn on the clipper for a few seconds to spread the oil.

For which type of clipper

Panasonic specifies it for a single model: the ER-RZ10 clipper. Do not use it with other Panasonic clippers, even if they look similar. If you are not sure which model you have, check the label on the bottom of the clipper or in the manual, where the ER code is listed.

Specifications

What else you need

• Oil for clipper blades
• Spray that cools and cleans the blades
• 4-in-1 spray for maintaining clippers

ProBeauty tip. Keep the old blade until you see that the new one works well. After each use, brush the hair off the blades and apply a drop of oil so the new blade stays sharp longer.

The BaByliss PRO Power Definer FX672ME is a replacement blade sold for the BaByliss PRO FX672E Power Definer clipper. Out of the box, the FX672E comes with a 45 mm stainless steel blade that has been diamond-sharpened. When the blade no longer cuts cleanly, you replace it, and the clipper works like new again.

What it does for you

• It restores a clean cut, without pulling hairs or leaving them uncut.
• It extends the life of your clipper: you only replace the worn blade, not the entire device.
• It saves you a trip to the service center, because you can install it yourself.
• It preserves the clipper's length settings, provided you install the blades correctly aligned.

How to use it at home

1. Turn off the clipper and unplug it or remove it from the charging stand.
2. Release the old blade as shown in the clipper's manual, and remove the old set.
3. Position the new set with the moving blade centered and parallel to the fixed blade, then secure it in place.
4. Apply a few drops of oil to the teeth.
5. Turn on the clipper for a few seconds and check the cut on a test strand of hair.

For which type of device

It is sold for the BaByliss PRO FX672E Power Definer clipper, an older model, corded or cordless. We did not find a BaByliss PRO data sheet that lists other compatible models, so if you have a different clipper, write us the code before ordering.

What else you need

• BaByliss PRO 4-in-1 Blade Care Spray
• Wahl Oil for lubricating blades, 100 ml
• Wahl Blade Ice Spray for cooling and cleaning blades

ProBeauty Tip. Because the FX672E is an older model, keep the old blade until you check that the new one cuts cleanly. Lubricating it after every day of use extends its life.

The Wahl Beret Stealth and Beretto Charger 97581-2016 is the mains power supply that Wahl lists in the official parts list for Beret and Beretto machines. Get it if you have lost or damaged the original power supply. Your clipper will be back in action without having to buy another device.

What it does for you

• Gets your machine running again: charge the Beret's lithium-ion battery with the original part, not with a random adapter.
• You know you have the correct code: 97581-2016 appears in the Wahl parts list as the transformer for Beret and Beretto.
• One power supply for two devices: if you have both Beret and Beretto, the same part is listed for both.
• Fast charging: Wahl gives the Beret 60 minutes of charging for 75 minutes of use.

How to use it at home

1. Check the old power supply or the parts list: the code should be 97581-2016.
2. Connect the plug to the charging stand or the machine, exactly as the original power supply was connected.
3. Plug the power supply into the wall and let the machine charge fully before the first use.
4. After charging, unplug the power supply and keep it dry, away from water.

For which type of device

For Wahl Beret (08841-616 and the black Stealth Beret version, 08841-1516) and Wahl Beretto (4212-0470) clippers, as grouped in the Wahl parts list. It is not a universal charger: for Magic Clip, Senior, or other models, you should look for their respective power supplies. If you have an older Beret with a different code on the label, ask us before ordering.

Specifications

What else you need

• Wahl Beret Clipper
• Wahl Beret Stealth Replacement Blade
• Wahl Blade Oil
• Wahl Blade Ice Spray for Blades

ProBeauty Tip. If the machine no longer charges, first check the contacts on the stand and the machine. Clean them with a dry brush; sometimes hair buildup there stops the charging, not the power supply.

Wahl No. 3 Black 10 mm Guard is the standard Wahl 10 mm guard, sold separately. Wahl says that No. 3 leaves approximately 10 mm of hair, for a short, classic haircut. Get it to replace a lost or broken one, or to have a second one on hand.

What it does for you

• Cuts uniformly at 10 mm over the entire area you pass over with the clipper.
• Use it for a short, classic haircut.
• Complete your set without having to buy all 8 guards again.
• Works with several Wahl clippers: the brand lists it as compatible with 8 models, from the Super Taper to the Balding.

How to use it at home

1. Turn off the clipper and brush the hair off the blade.
2. Place the guard on the blade and press down until it clicks into place. Check that it is secure before turning it on.
3. Cut against the direction of hair growth, using even strokes.
4. Pass over the same area several times to catch the lying hairs.
5. After cutting, clean it with a small brush. From time to time, wash it with warm water and mild soap and let it dry completely.

For what type of clipper

Wahl lists it as compatible with the Super Taper, Super Taper Cordless, Legend, Legend Cordless, Senior Cordless, Magic Clip, Magic Clip Cordless, and Balding. You receive a single guard, not a set. It is not for outline clippers or clippers with slide-on guards, such as the Kuno or ChromStyle.

Specifications

What else you need

• Wahl No. 2 guard, shorter
• Wahl No. 4 guard, longer
• Complete Wahl Premium guard set
• Wahl Magic Clip Cordless clipper
• Wahl clipper blade oil

ProBeauty tip. No. 3 is a good starting point for the top. On the sides, go down to No. 2 (6 mm), then blend the areas with No. 3 held slightly at an angle.

The Wahl 8-piece black guard set includes plastic guards 1–8, from 3 to 25 mm. Attach them to the clipper to increase the cutting length and trim evenly to your chosen length. It is the basic set for trimming at home, with all the usual sizes.

What it does for you

• You have all the basic sizes: 3, 6, 10, 13, 16, 19, 22 and 25 mm.
• Trim evenly, because the guard keeps the blade at the same distance from the scalp.
• Create fades by moving from one size to the next.
• Replace lost or broken guards on your clipper all at once.

How to use them at home

1. Turn off the clipper and clear the hair from the blade.
2. Choose a size. If you are unsure, start with a larger one: you can always cut more off.
3. Place the guard on the blade and press until it clicks into place. Check that it is secure.
4. Cut against the direction of hair growth using even strokes.
5. After trimming, clean the guards with a small brush and keep them dry in a box or bag.

For which type of clipper

Wahl UK says that the set fits all taper clippers. It is not for outline clippers or clippers that use slide-on guards, such as Kuno or ChromStyle. If you do not know what type of blade your clipper has, message us the model before ordering.

Specifications

What else you need

• Wahl Super Taper Clipper
• Wahl Legend Clipper
• Wahl Magic Clip Cordless Clipper
• Wahl Clipper Blade Oil
• Wahl Fading Brush

ProBeauty Tip. All the guards are black, so lay them out on the table in order, from size 1 to size 8, before you start. When creating a fade, you change guards frequently, so this helps prevent accidentally picking a smaller size.

The Wahl Detailer Motor 08723-1401 is the replacement motor listed in the official Wahl parts list for corded Detailer and Wide Detailer trimmers. Replace it when the old motor has failed but the rest of the trimmer is in good condition. The Detailer is part of the Wahl 5 Star series.

What it does for you

• Save the trimmer: replace the motor, not the entire device.
• One motor for two models: the Wahl parts list identifies it as the "Detailer / Wide Detailer Motor".
• Original Wahl part, with a code from the brand's parts list.
• The trimmer works like new again: the motor is the original model motor, not an adapted one.

How to use it at home

1. Unplug the trimmer and first check the cable and blade, which wear out more often than the motor.
2. Confirm the model on the label: corded Detailer or Wide Detailer.
3. Take the trimmer and motor to an authorized Wahl service center for installation.
4. After repair, oil the blade and test the trimmer before the first client.

For which type of device

For corded Wahl trimmers: Detailer (08081-016) and Wide Detailer, as listed in the Wahl parts list. It is not for the Cordless Detailer Li, Hi-Viz, or Beret. If you do not know which model you have, send us the code from the label.

What else you need

• Corded Wahl Wide Detailer Trimmer
• Wahl Detailer T-Wide Replacement Blade
• Wahl Blade Oil
• Wahl Blade Ice Spray

ProBeauty Tip. On corded trimmers, a twisted or bent cable at the base can cause the same symptoms as a faulty motor. Check it first; you may not need a new motor.

The Moser Genio Plus Removable Battery 1854-7988 is the spare battery Moser provides for the Genio Plus clipper. The Genio Plus comes with two interchangeable batteries: one is in use while the other charges on the charging stand. With an extra battery or a replacement for a worn-out one, your clipper is always ready to work.

What it does for you

• Shave without charging breaks: remove the empty battery and insert a fully charged one in a few seconds.
• Real runtime: Moser provides approximately 100 minutes of shaving time on a full charge.
• Fast charging: approximately 75 minutes to a full charge on the clipper's charging stand.
• Original NiMH battery: the manual requires only the original battery, which features thermal protection.

How to use it at home

1. For the first use, charge the battery for 1.5 hours, as required by the Genio Plus manual.
2. Press the release buttons on the side and remove the old battery from the clipper.
3. Place the battery on the charging stand; the red LED lights up and flashes when charging is complete.
4. Push the charged battery into the clipper until you hear it click into place.
5. Recharge only when the indicator light on the clipper turns on; at that point, you have about 15% battery life remaining.

For which type of device

For the Moser Genio Plus clipper and, according to the Moser parts list, the Moser Arco 1854-0081 pet clipper. It is not for the standard Genio, model 1565, which has an internal battery.

Specifications

What else you need

• Moser Genio Plus Motor 1854-7060
• Moser Support and Guide 1854-7833
• Blade oil
• Blade cooling and cleaning spray

ProBeauty tip. Always leave the second battery on the charging stand. This way, you'll have a fully charged one ready when the battery in the clipper runs out, and both will wear evenly.

The BaBylissPRO Styler Wide is a hair straightener with 38 × 110 mm EP Technology floating plates, an ion generator, and 5 temperature settings between 150 and 230°C. Its curved profile straightens hair and can also create curls or waves. It is ideal for long or thick hair and helps you get ready faster.

What it does for you

• Glides easily through hair: the EP Technology plates distribute heat evenly and reduce friction.
• Reaches close to the roots with edge-free floating plates and smooths hair in fewer passes.
• Reduces static and frizz with its ion generator.
• Heats up quickly: it is ready in 25 seconds thanks to its ceramic heating element.
• Creates large curls and waves thanks to its curved profile.
• Switches off automatically after 20 minutes.

How to use it at home

1. Use only on completely dry, detangled hair with a heat protectant applied.
2. Choose the temperature: 150 or 170°C for fine or bleached hair, 190°C for normal hair, and 210 or 230°C for thick, resistant hair.
3. Divide the hair into sections and secure them with clips.
4. To straighten, pass the plates slowly once from the roots to the ends.
5. To curl, take a section, twist the plates half a turn, and slowly pull them toward the ends.
6. Place it on the heat-resistant mat included in the package until it cools down.

For which hair type

It is suitable for all hair types, as you can choose from 5 temperature settings. The wide 38 mm plates are designed for long, thick hair, straightening it in fewer passes. For short hair or bangs, the 28 mm Styler version is easier to handle.

Specifications

What else you need

• Wella EIMI Thermal Image Heat Protectant Spray
• Hair clips
• Olivia Garden NanoThermic Paddle Brush

ProBeauty tip. For thick hair, take sections no wider than the plates and no thicker than one finger. The heat will be distributed evenly, and you won't need to go over the same section twice.

BaByliss PRO FX801JE is a taper replacement blade for the BaByliss PRO FreshFX clipper. It is made of Japanese steel with a PVD coating and has a crescent-shaped profile. Use it when your clipper blade has become dull, is pulling hair, or has been damaged.

What it does for you

• Your clipper cuts cleanly again, without pulling hair.
• Follows the movement of your hand: the crescent profile helps with the outward motion used for transitions.
• Resists wear and corrosion thanks to the Japanese steel and PVD coating.
• Suitable for fades, transitions, and clipper-over-comb cutting.

How to use it at home

1. Check your clipper model: the blade is for the BaByliss PRO FreshFX.
2. Turn off the clipper and remove it from the charger.
3. Unscrew the old blade and use the brush to remove all hair from underneath.
4. Position the new blade, align the moving blade with the fixed one, and tighten the screws without forcing them.
5. Apply 2 or 3 drops of oil to the blade and run the clipper for a few seconds.

For which clipper

For the BaByliss PRO FreshFX clipper. If you have another FX series model and want to install it on that, write us your clipper code before ordering and we will confirm if it fits.

Specifications

What else you need

• BaByliss PRO FreshFX clipper
• Blade oil
• Wahl Blade Ice spray for cooling the blades

ProBeauty tip. After installation, check the alignment: the moving blade should sit slightly behind the fixed one across its entire width. If it protrudes forward, the clipper will scratch the skin.

BaByliss PRO Avanzato is a 2300 W hair dryer with a long-lasting digital motor and ionic technology. It weighs just 365 g and is 195 mm long. It is for you if you dry your hair often or work with it for many hours and want a lightweight device with constant airflow.

What it does for you

• It won't tire your hand: 365 g, compact and balanced body.
• Dries consistently: 148 km/h, 80.6 m³/h airflow and 1198 Pa pressure.
• Reduces frizz and leaves hair smooth and shiny thanks to ionic technology.
• Adapts to your hair, with 2 speeds and 3 temperatures.
• Sets the style with the lockable cool air button.
• Works precisely, with 2 narrow nozzles measuring 6 × 60 mm and 6 × 75 mm.

How to use it at home

1. Towel-dry your hair and apply heat protection to the lengths.
2. Choose the speed and temperature. For fine hair, start on the lowest setting.
3. Dry the roots without a nozzle, then attach the nozzle for blow-drying.
4. Work on sections with a round brush, directing the air from the roots to the ends.
5. Set each section with cool air, then unplug the dryer.
6. Regularly clean the removable rear filter.

For what hair type

It works on all hair types because you can adjust the speed and temperature separately. It is especially suitable for short and medium hair and for blow-drying. If you have very long and thick hair or want a diffuser included, check out Poderoso, which has a higher airflow.

Specifications

What else you need

• Wella EIMI Thermal Image Heat Protection Spray
• Olivia Garden Expert Blowout Shine 35 mm Round Brush
• Hair Clips
• BaByliss PRO Poderoso 2400 W Hair Dryer, with Diffuser and Turbo Function

ProBeauty Tip. At 365 g, Avanzato is easy to hold above your head. Take advantage of this and dry the roots from the neck up for volume before moving on to the lengths.

The BaByliss PRO Styler is a hair straightener with 28 × 110 mm floating EP Technology plates, an ion generator, and 5 temperature settings between 150 and 230 °C. It has a curved profile, so it straightens hair and also creates curls or waves. It is for you if you want a single iron for straight hair, waves, and curls.

What it does for you

• Glides easily through hair: the EP Technology plates distribute heat evenly and reduce friction.
• Reaches close to the roots with floating edge-to-edge plates, and smooths hair in fewer passes.
• Reduces static and frizz with its ion generator.
• Heats up quickly: it heats up in 25 seconds with its ceramic heating element.
• Creates both curls and waves thanks to its curved profile.
• Shuts off automatically after 20 minutes.

How to use it at home

1. Use only on completely dry, combed hair with a heat protectant applied.
2. Choose the temperature: 150 or 170 °C for fine or bleached hair, 190 °C for normal hair, and 210 or 230 °C for thick, coarse hair.
3. Divide the hair into sections and secure them with clips.
4. To straighten, pass the iron slowly once from the roots to the ends.
5. For curls, take a section, twist the iron half a turn, and slowly pull it toward the ends.
6. Place it on the heat-resistant mat included in the package until it cools down.

For what hair type

It works on all hair types because you can choose from 5 temperature settings. The 28 mm width is convenient for short, medium, and long hair. If you have very long and thick hair, the 38 mm Styler Wide covers more hair in a single pass.

Specifications

What else you need

• Wella EIMI Thermal Image Heat Protectant Spray
• Hair clips
• Olivia Garden NanoThermic Paddle Flat Brush

ProBeauty tip. For curls that last, let the section cool in your palm for a few seconds before releasing it.

The BaByliss PRO Poderoso is a 2400 W hair dryer with a long-lasting digital motor and a Turbo function that increases the air speed to 186 km/h. It weighs 400 g and comes with 3 nozzles, a diffuser, and a noise reducer. It's for you if you have long or thick hair and want to dry it quickly without a heavy device in your hand.

What it does for you

• Dries quickly: 186 km/h, 96.5 m³/h airflow, and 1804 Pa pressure.
• Gives you an extra boost when you're in a hurry, with the Turbo function, activated with a button.
• Doesn't tire your hand: 400 g and 200 mm long, with a compact and balanced body.
• Reduces frizz and leaves hair shiny, thanks to ionic technology.
• Works more quietly, with the noise reducer included.
• Does both curls and smooth brushing: 150 mm diffuser with a locking system and 3 concentrator nozzles.

How to use it at home

1. Towel-dry your hair and apply heat protection to the lengths.
2. Choose one of the 2 speeds and 3 temperatures. For fine hair, start on the low setting.
3. Dry the roots first, then attach the appropriate nozzle: the 6 × 75 mm one for wide sections, the 4 × 70 mm one for precise work.
4. Work on sections, with the brush, directing the air from the roots to the ends.
5. For curls, attach the diffuser and dry on low speed, without pulling the hair with your hand.
6. Set the shape with cool air. The button can be locked, so you don't have to keep it pressed.
7. Regularly clean the removable filter on the back.

For what type of hair

It works on all hair types, because you adjust the speed and temperature separately. You'll feel it most on long, thick, or hard-to-dry hair, where the Turbo function shortens the time. For curly hair, you have the diffuser in the package.

Specifications

What else you need

• Wella EIMI Thermal Image heat protection spray
• Olivia Garden Expert Blowout Shine 55 mm round brush, for long hair
• Olivia Garden Expert Blowout Shine 35 mm round brush
• Hair clips

ProBeauty tip. Keep the Turbo function for the beginning, when the hair is wet. Towards the end, switch to low speed and cool air, to close the cuticle and preserve the shine.

The Wahl Pro Shine Curling Tong 13 mm is the 13 mm clamp and barrel curler from the Pro Shine series. The barrel has a keratin-infused ceramic coating, and the temperature is digitally adjustable between 80 and 210 °C. It heats up in 60 seconds. Wahl designed it for tight, precise spiral curls.

What it does for you

• Tight, precise spiral curls with a 13 mm barrel.
• Less heat on fine hair: choose a low temperature without compromising on results.
• Shinier, silkier hair thanks to the keratin-infused ceramic coating.
• Glides easily through hair without snagging or pulling strands.
• Uniform curls: the clamp holds the section firmly as you curl it.
• Small, spiral-like curls that stay defined.

How to use it at home

1. Start with clean, completely dry hair. Apply a heat protectant spray.
2. Choose the temperature: lower for fine or sensitized hair, higher for thick hair.
3. Secure the hair in the clamp and work from the bottom up, on small sections.
4. Wrap the section around the barrel and hold it for 8–12 seconds, as recommended by the Wahl styling guide.
5. Release the curl and let it cool completely before touching it.
6. Finally, place the device in the silicone cover only after it has cooled.

For what hair type

For short and medium hair, as well as long hair if you want small, dense curls. For very thick hair, work with thinner sections so the curl forms all the way to the ends. For loose waves, choose a larger diameter, such as 25 or 32 mm.

Specifications

What else you need

• Wella EIMI Thermal Image Heat Protectant Spray
• Hair Sectioning Clips
• Milk Shake Eco Strong Hairspray, for setting curls
• GA.MA Universal Stand for Styling Tools

ProBeauty Tip. For well-defined spirals, wrap the section from the roots to the ends, with the coils next to each other, not overlapping. Change the direction of wrapping from one section to the next: the curls will look more natural and have more volume.

The Wahl Cordless Senior Set housing 08504-7065 is the housing set for the Wahl Cordless Senior clipper. Use it when your clipper's housing is cracked, broken, or heavily scratched. The photo shows the black top cover with the Senior cordless inscription, the silver lower housing, with a gold lever, and the small mounting parts.

What it does for you

• Repair the clipper, don't replace it, when the only problem is the housing.
• Black top cover, with the Wahl inscription, the five stars, and Senior cordless.
• Silver lower housing, with the gold adjustment lever mounted.
• Small mounting parts: a metal spring, a washer, and three screws, as seen in the photo.

How to use it at home

1. First, check your clipper's code and model on the label under the housing or in the manual.
2. Unplug the clipper and remove it from the charging stand.
3. Take a photo of the clipper before you disassemble it, so you know where each part goes.
4. Move the internal components into the new housing and tighten the screws without forcing them.
5. If you have never disassembled a clipper before, leave the assembly to a service center.

For what type of clipper

For the Wahl Cordless Senior clipper, the model written on the cover. Wahl has made several generations of the Senior, corded or cordless, so check the model before ordering. If you are not sure, write us the code on your clipper and we will confirm the compatibility.

Specifications

What else you need

• Wahl 5 Star Cordless Senior Clipper
• Wahl Blade Oil
• Wahl Blade Ice Spray for cooling the blades

ProBeauty Tip. While you have the clipper disassembled, clean out all the hair trapped inside with a dry brush and put a drop of oil on the blade. On a new housing, a clean clipper works and sounds like new.

The Wahl Pro Shine Curling Tong 19 mm is the clip-on curling iron with a 19 mm barrel from the Pro Shine series. The barrel has a keratin-infused ceramic coating, and the temperature is digitally adjustable between 80 and 210 °C. Wahl designed it for smooth, well-defined curls.

What it does for you

• Smooth, well-defined curls with a 19 mm barrel.
• Less heat on fine hair: choose a lower temperature without compromising on results.
• Shinier, silkier hair thanks to the keratin-infused ceramic coating.
• Glides easily through hair without snagging or pulling strands.
• Uniform curls: the clip holds the section firmly as you curl it.
• Smooth, polished curls that are easy to style after cooling.

How to use it at home

1. Start with clean, completely dry hair. Apply a heat protectant spray.
2. Choose the temperature: lower for fine or sensitized hair, higher for thick hair.
3. Secure the hair in the clip and work from the bottom up, taking small sections.
4. Wrap the section around the barrel and hold it for 8–10 seconds, as recommended by the Wahl styling guide.
5. Release the curl and let it cool completely before touching it.
6. Finally, place the device in the silicone cover only after it has cooled.

For which hair type

For medium-length and long hair when you want defined, but not very small, curls. Use a lower temperature on fine hair. For large, loose waves, the 32 mm diameter is more suitable.

Specifications

What else you need

• Indola Thermal Protector Spray
• Hair clips
• Milk Shake Let It Shine Shine Spray
• GA.MA Universal Stand for Styling Tools

ProBeauty Tip. For smooth curls, secure the section with the clip halfway down, not at the ends, and wrap it flat around the barrel. This prevents the ends from bending and makes the curl look shiny from top to bottom.

The Wahl Pro Shine Conical Wand 13–25 mm is the clamp-free curling wand from the Pro Shine series, with a conical barrel that tapers from 25 to 13 mm. It is designed for natural, relaxed waves. It heats up and cools down very quickly, and the temperature is digitally adjustable from 80 to 210 °C.

What it does for you

• Natural, effortless waves thanks to the conical shape of the barrel.
• Different curl sizes with the same device: the curl is wider at the base and tighter towards the ends.
• Less heat on fine hair with digitally adjustable temperature.
• Shinier, silkier hair thanks to the keratin-infused ceramic barrel.
• Secure grip: the cool tip gives you a place to hold the device while styling.

How to use it at home

1. Start with clean, completely dry hair and apply a heat protectant spray.
2. Set the temperature: lower for fine hair, higher for thick hair.
3. Secure the hair in a clip and work from the bottom up, using small sections.
4. Hold the device by the cool tip and wrap the section around the cone, from the base to the ends. Use the thicker part of the cone for wider waves.
5. Hold for a few seconds, then gently pull the barrel out of the curl and let it cool.
6. Run your fingers through the curls once they have cooled for relaxed waves.

For what hair type

Wahl recommends it for all hair types, using lower temperatures for fine or damaged hair. The extra-long barrel is especially useful for long hair. On very short hair, the conical wave is less visible; a small-diameter clamp curling iron works better there.

Specifications

What else you need

• Sensus Heat Shield Heat Protectant Spray
• Hair Clips
• Milk Shake Let It Shine Shine Spray
• GA.MA Universal Holder for Hair Dryers and Straighteners

ProBeauty Tip. Since the barrel has no clamp, hold the end of the section between your fingers as you wrap it. If you want to avoid touching the barrel altogether, a heat-resistant glove will be very helpful during your first few styling sessions.

The Wahl 5 Star Hi-Viz Nightshade cordless trimmer is the limited-edition, black version of the Hi-Viz trimmer. It comes with the new Hi-Viz 2.0 blade, a hybrid T-blade: with it you remove bulk and create fine details, without changing the device. It is designed for barbers and for those who trim their own beards.

What it does for you

• A single device for bulk and details: the Hi-Viz 2.0 blade is optimized for removing bulk, but remains precise on contours.
• See exactly where you cut: the thin neck of the device leaves the working area visible.
• Clean lines: the blade is adjustable to zero-gap, for contours very close to the skin.
• Blade that stays cool, thanks to the DLC coating.
• Short charging times: a full charge takes 45 minutes.

How to use it at home

1. Fully charge the device before first use.
2. Put a drop of oil on the blade and turn on the device for a few seconds, so the oil distributes.
3. For contouring, hold the blade perpendicular to the skin and work with short, top-to-bottom strokes.
4. For details and lines, slightly tilt the device and use only the corner of the blade.
5. After use, clean the hair from the blade with the brush and put a drop of oil on it again.

For what type of work

For contours, lines, beard finishing, and designs in the hair. The T-blade is wide, so it also works for removing bulk on small areas, such as the nape of the neck or sideburns. For cutting the whole head you need a hair clipper with attachable guards.

Specifications

What else you need

• Wahl Hi-Viz T-Wide replacement blade
• Wahl blade oil
• Wahl Blade Ice spray for cooling the blades
• Wahl neck brush

ProBeauty tip. The zero-gap adjustment brings the blade very close to the skin. Make the first passes gently, on a small area of the neck, so you can see how it cuts, then move on to the face contour.

The Moser Li+Pro Mini Cordless Trimmer 1584-0050 is Moser's small trimmer that can be used corded or cordless. It features a German-made stainless steel STAR BLADE II blade that cuts at 0.4 mm and weighs approximately 120 g.

What it does for you

• Trimming very close to the skin: the STAR BLADE II blade cuts at 0.4 mm over a width of 32 mm.
• Work corded or cordless: the lithium-ion battery lasts up to 75 minutes.
• Charges quickly, in approximately 45 minutes, with no memory effect.
• Constant power: the chip-controlled motor maintains the same cutting power.
• Easy-to-remove blade, for cleaning and quick replacement with optional Carving or Designer blades.
• Lightweight and quiet, with a one-piece housing.

How to use it at home

1. Charge the trimmer on the stand. The LED in the button shows the charging status.
2. Put a drop of oil on the blade and run the trimmer for a few seconds.
3. For trimming, hold the blade perpendicular to the skin and work in short strokes.
4. For a short beard, attach the adjustable 3–6 mm comb.
5. After use, clean the blade with the brush and re-oil it.

For what type of work

For trimming contours, the neck, sideburns, mustache, and short beards, at the barbershop or at home. It is small and lightweight, so it easily reaches around the ears. For cutting the whole head, you need a hair clipper with a wide blade and longer combs.

Specifications

What else you need

• Wahl blade oil
• Wahl Blade Ice spray for cooling the blades
• Wahl neck strap
• Moser Li+Pro Mini 1584-7050 replacement motor

ProBeauty tip. When the battery life starts to visibly decrease, don't blame the battery: the Moser manual states that a dirty blade and a clogged housing opening shorten the operating time. Clean them and check again.