Italwax · Ceară caldă (cutie metalică) Natural Classic

Italwax Natural Classic Hot Honey Wax 800 ml is the large size of the transparent honey wax. It contains natural beeswax and is designed for fine and light-colored hairs. It is applied with a spatula and strips to large areas of the body.

What it does for you

• Removes fine and light hair, for which Italwax has created transparent waxes.
• Grips the hair at the root: the brand says that the hairs come out quickly, with the root.
• A thin layer is enough, so a box lasts a long time.
• You don't buy wax often: 800 ml is the largest size in the line.
• You can see the wax on the skin, although it is transparent, so you don't leave areas uncovered.

How to use it at home

1. Place the protective paper on the heater, then the open box. Let it melt.
2. Stir occasionally. Good working wax is viscous, not liquid.
3. Test the temperature on the inside of the wrist before the first strip.
4. Cleanse the skin with a pre-epilation product and apply a dusting of talc.
5. Quickly spread a thin layer with the edge of the spatula, in the direction of hair growth.
6. Press the strip over the wax, with one end free, and pull it off against the direction of hair growth, parallel to the skin.
7. Finally, wipe away the residue with a post-epilation lotion.

For what skin type and area

For legs, arms, and back, on fine and light hair, at least 3 mm long. It is not the right wax for thick and short hairs. Skin with acute or chronic conditions in the epilation area and varicose veins should be excluded from epilation.

Active ingredients

• Beeswax: Italwax includes it in the honey wax formula, in its natural form.
• Natural ingredients: pine resin and plant additives, the composition of classic hot waxes.

Specifications

What else you need

• Wax heater with an 800 ml container
• Protective paper for the wax heater
• Wooden spatulas for wax
• Paper roll for epilation strips
• Italwax Top Line pre-epilation foam
• Italwax post-epilation lotion, with azulene

ProBeauty tip. Between sessions, let the wax cool in the box and put the lid back on. Next time, just melt it again, without transferring it to another container.

Italwax Natural Classic Hot Wax in a 400 ml Honey Jar is a transparent, liposoluble wax made with natural beeswax. It is designed for fine, light-colored hairs. The 400 ml jar is the smallest size in the range, ideal if you wax infrequently.

What it offers

• Removes fine, light-colored hairs, exactly the type of hair Italwax recommends for honey wax.
• Adheres well to the hair: the brand states that all its classic waxes adhere well to hair.
• You use only a little, as it is applied in a thin layer.
• You don’t buy more than you need: the 400 ml jar is the smallest size in the range, ideal for getting started.
• You work with natural resin: the base of the classic waxes is pine resin with plant-based additives.

How to use it at home

1. Open the jar, place it in a wax warmer, and let it melt, stirring occasionally.
2. When it is viscous but no longer runny, test it on the inside of your wrist.
3. Prepare the skin: apply lotion or foam before waxing, then a little talc.
4. Take a small amount of wax with a spatula and wipe off the excess to prevent dripping.
5. Apply a thin layer in the direction of hair growth over an area the size of the strip.
6. Apply the strip, leaving one end free, press it down, and pull it off quickly in the opposite direction of hair growth, parallel to the skin.
7. Finish by applying an oil or lotion after waxing to remove any wax residue.

Suitable skin types and areas

For the legs, arms, and back, and for fine, light-colored hairs at least 3 mm long. For thick, short hairs, a thicker wax from the same range will adhere more securely. Avoid using it on skin with acute or chronic conditions or over varicose veins.

Active ingredients

• Natural beeswax: the ingredient that gives the honey wax its distinctive character.
• Pine resin: the natural base of the classic hot waxes, with plant-based additives.

Specifications

What else you need

• Wax warmer with an 800 ml container
• Wooden wax spatulas
• Paper roll for waxing strips
• Italwax talc for waxing, 90 g
• Italwax after-waxing lotion with orange

ProBeauty tip. If you wax every few weeks, the small jar is the more practical choice. Only put the lid back on after the wax has cooled to prevent dust from settling between sessions.

ItalWax Strawberry Wax, 800ml Tin

This is a high-density liposoluble wax that allows for easy and efficient removal of thick, short hair from large body areas such as the back, arms, or legs, and is used with waxing strips. It perfectly molds to the contours of the area to be epilated, allowing each hair to be gripped very close to the skin for easy and very efficient epilation. It is recommended to apply a thin layer with a spatula, over which the depilatory strip is then applied. Strawberry wax in a can is an improved version of classic hot wax. Thanks to the addition of specific and innovative elements, this wax has established and advantageous properties: it has a much lower melting temperature (40°C). Strawberry wax removes all hair without irritating the skin, reducing the sensation of pain. For healthy skin and successful epilation, we recommend using pre- and post-epilation products from the ItalWax range. ItalWax products are made from carefully selected ingredients and offer a wide range of professional products that cover all needs. These products can be used both in beauty salons and at home.

Features:

-Used with waxing strips

-Liposoluble wax

-Recommended for thick, coarse, and short hair

-Ideal for back, leg, and arm areas

-Perfectly molds to the skin

-Very low melting temperature (40°C).

How to use:

-Use disposable gloves.

-Heat the wax to 40°C.

-It is recommended to use a metal spatula

-Stir the wax occasionally to check its consistency; the wax is ready for application when it reaches the consistency of melted honey.

-Apply a thin layer of wax to the desired area with a spatula in the direction of hair growth.

-Apply the depilatory strip over the wax spread on the skin, leaving a grip area.

-Wait a few seconds for the wax to harden.

-Stretch and hold the skin taut in the opposite direction of removal.

-Remove the waxing strip with a swift movement, parallel to the skin.

-Repeat the procedure if necessary.

For a complete procedure and healthy skin, we recommend using pre- and post-epilation products.

Weight: 800g

ItalWax Azulene Wax Metal Container 800ml

This is a synthetic wax that allows easy and effective removal of fine hair, on any body surface, even in hard-to-reach areas such as the back, arms or legs, and is used with waxing strips. It perfectly molds to the contour of the area to be waxed, allows gripping each hair very close to the skin, and provides easy and very effective hair removal. It is recommended to apply a thin layer with a spatula, over which the depilatory strip is then applied. The green Azulene wax in a can is an improved version of classic hot wax. Thanks to the addition of specific and innovative elements, this wax has established and advantageous properties: it has a much lower melting temperature (40°C). Azulene wax removes all fine hairs without irritating the skin, reducing the sensation of pain. For healthy skin and successful hair removal, we recommend using ItalWax pre- and post-epilation products. ItalWax products are created from carefully selected ingredients and with a wide range of professional products that cover all needs. These products can be used both in beauty salons and at home.

Features:

-Used with waxing strips

-Recommended for fine hair

-Ideal for the back, arms, and legs

-Molds perfectly

-Allows gripping any hair type and strand

-Very low melting temperature (40°C).

How to use:

-Use disposable gloves.

-Heat the wax to 40°C.

-It is recommended to use a metal spatula

-Stir the wax occasionally to check consistency; the wax is ready for application when it reaches the consistency of melted honey.

-Apply a thin layer of wax to the desired area with a spatula in the direction of hair growth.

-Apply the depilatory strip over the wax on the skin, leaving space to grip.

-Wait a few seconds for the wax to harden.

-Stretch and hold the skin taut in the opposite direction of removal.

-Remove the waxing strip with a brisk motion, parallel to the skin.

-If necessary, repeat the procedure.

For a complete procedure and healthy skin, we recommend using pre- and post-epilation products.

Weight: 800g

ItalWax Aloe Vera Wax Can 800ml

This is a synthetic wax that allows for easy and efficient removal of fine hair, on any body surface, even in hard-to-reach areas, and is used with waxing strips. It perfectly molds to the contour of the area to be waxed, allows each hair to be gripped very close to the skin, and provides easy and very efficient waxing. It is recommended to apply a thin layer with a spatula, over which the waxing strip is then applied. Aloe Vera wax in a can is an improved version of classic hot wax. Thanks to the addition of specific and innovative elements, this wax has established and advantageous properties: it has a much lower melting temperature (37-39 ° C). Aloe Vera wax removes all fine hairs without irritating the skin, reducing the sensation of pain. For healthy skin and successful waxing, we recommend using pre- and post-waxing products from the ItalWax range. ItalWax products are created from carefully selected ingredients and offer a wide range of professional products that cover all needs. These products can be used in beauty salons as well as at home.

Features:

- Used with waxing strips

- Recommended for fine hair

- Ideal for any body surface

- Molds perfectly

- Allows gripping of any hair type and strand

- Very low melting temperature (37-39 ° C).

How to use:

- Use disposable gloves.

- Heat the wax to a temperature of 37°- 39 ° C.

- The use of a metal spatula is recommended.

- Stir the wax occasionally to check its consistency; the wax is ready for application when it reaches the consistency of melted honey.

- Apply a thin layer of wax to the desired area with a spatula in the direction of hair growth.

- Apply the waxing strip over the wax spread on the skin, leaving a grip area.

- Wait a few seconds for the wax to harden.

- Stretch and hold the skin taut in the opposite direction of removal.

- Remove the waxing strip with a quick motion, parallel to the skin.

- If necessary, repeat the procedure.

For a complete procedure and healthy skin, we recommend using pre- and post-waxing products.

Weight: 800g