Moser · Primat

The Moser Primat 1230 1230-7035 lever pivot set is the set of pivots listed in the official Moser parts list for the Primat 1230 hair clipper. The pivots hold the mechanism lever in place. Replace them when the lever has play, squeaks, or the clipper starts cutting unevenly.

What it does for you

• The mechanism runs tightly again: new pivots remove the play in the lever.
• The clipper runs quietly: Moser describes the Primat as very quiet, and loose parts make noise.
• Part by Moser code: 1230-7035 is listed in the parts list for the Primat 1230 model.
• Inexpensive repair: you replace a few small pivots, not the whole clipper.

How to use it at home

1. Unplug the clipper and open the blade and housing.
2. Take a photo of the lever and pivots before removing anything.
3. Replace the old pivots with the new ones in the same position.
4. Close the clipper, oil the blade, and run a short test.
5. If you have never worked on the mechanism of a clipper, leave the assembly to an authorized service center.

For what type of device

For the Moser Primat 1230 corded hair clipper, as listed in the Moser parts list. We have no confirmation for the Primat 2in1 or other models.

Specifications

What else you need

• Moser Primat 1230-7730 balancer
• Moser Primat 1230-7472 blade support
• Moser Primat 1230-7720 blade guide
• Moser Primat 1230-7071 switch
• Blade oil
• Blade cooling and cleaning spray

ProBeauty tip. If you are taking apart the mechanism anyway, also check the balancer and the guide. The parts around the lever wear out together; replace them all at once and you won't have to take the clipper apart again anytime soon.

The Moser Primat 1230 Blade Support and 1230-7472 adjustment segment is a replacement part for the blade area of the Moser Primat corded hair clipper. Primat is a Moser model, and the 1230 codes are its parts in the official parts list. Moser does not publish a data sheet for code 1230-7472, so you order it when the code on the old part or the service center tells you exactly this code.

What it does for you

• The blade is securely fixed again: a broken or worn blade support makes the blade loose.
• Straight cutting line: with the blade properly seated, the cut is uniform.
• Order by code: compare 1230-7472 with the code on the old part before installation.
• You don't replace the whole machine: Primat is designed for continuous work and is worth repairing.

How to use it at home

1. Unplug the machine and open the blade.
2. Take a photo of how the old part is positioned and compare its code and shape with the new part.
3. Mount the new support in the same position, then put the blade back in place.
4. Check the cutting length adjustment in all positions, lubricate the blade and turn on the machine as a test.
5. If you have never opened a machine before, leave the installation to an authorized service center.

For what type of device

For the Moser Primat 1230 corded hair clipper. For Primat 2in1 or other models we have no confirmation; check the type on the machine's label.

What else you need

• Guide for Moser Primat 1230-7720 blade
• Moser Primat 1230-7035 pivot set
• Moser Primat 1230-7730 balancer
• Moser Primat 1230-7590 upper housing
• Blade oil
• Cooling and cleaning spray for blades

ProBeauty's tip. When you replace a part in the blade area, also check the blade. If it is worn or has broken teeth, replace it then too; otherwise, the new part will wear out quickly.