WAHL - Accessories

Wahl Blade Ice is a 4-in-1 spray for clipper and trimmer blades, in a 400 ml bottle. It cools, lubricates, and cleans the blades, and protects them from corrosion. Use it between clients or during a haircut when you feel the blade has overheated.

What it does for you

• Cools the blade instantly, so the client no longer feels heat on their skin during long haircuts.
• Helps the blades glide more easily through hair, as the spray lubricates them and reduces friction.
• Removes fine hair and dirt from between the blade teeth, so the cut remains precise.
• Protects the blades from corrosion between uses.
• Does not leave a thick layer of oil on the blade, according to Wahl, so you can continue cutting immediately.

How to use it at home

1. Brush the hair off the blades with the brush provided with the clipper.
2. Spray Blade Ice directly onto the blades and leave it to work for about 30 seconds.
3. Wipe the blades with a clean, dry cloth, then continue cutting.
4. Finally, apply a few drops of Wahl blade oil to the blades. The spray does not replace lubrication.

For what type of device

Wahl says it is suitable for the blades of all clippers and trimmers, including the Detailer Li. It is especially useful when you cut a lot with the same clipper and the blade overheats. It is not a spray for hair or skin, and it does not replace blade oil.

Specifications

What else you need

• Wahl blade oil
• Wahl Magic Clip Cordless clipper
• Wahl Detailer Li trimmer
• Magic Clip Cordless replacement blade
• Wahl fade brush

ProBeauty tip. When doing a long fade, stop halfway and spray a puff of Blade Ice onto the blade. A cool blade feels much better on the neck and around the ears, where the skin is sensitive.

Wahl Blade Oil is Wahl's oil for hair clippers, trimmers, and edgers, in an 118 ml bottle. Wahl specially formulated it for its clippers and trimmers. Used regularly, it helps blades cut precisely and last longer.

What it does for you

• Blades last longer because the oil reduces friction and heat between the fixed and moving blades.
• The cut remains precise from one client to the next, without pulling hair.
• Blades do not rust when you put the clipper aside if you lubricate them beforehand.
• Works on all Wahl clippers and most clippers from other brands, according to Wahl.
• You can also use it on trimmers, not just hair clippers.

How to use it at home

1. Turn off the clipper and brush off the hair remaining on the blades. If you used a cleaning spray, wipe the blades.
2. Place 3 drops of oil on the top edge of the blades and one drop at each end.
3. Turn on the clipper for about 10 seconds so the oil spreads evenly.
4. Wipe off the excess with a clean cloth so it doesn't collect hair and dust.

For what type of device

For Wahl hair clippers, edgers, and trimmers, as well as most clippers from other brands. Wahl does not recommend substitutes such as mineral oil or sewing machine oil. It is not an oil for hair, beards, or skin.

Specifications

What else you need

• Wahl Blade Ice Spray for blades
• Wahl Magic Clip Cordless Hair Clipper
• Wahl Legend Cordless Hair Clipper
• Wahl Detailer Li Edger
• Magic Clip Cordless Replacement Blade

ProBeauty Tip. Keep the bottle near the clipper, not in a drawer. Three drops after every cut do more for the blade than a heavy lubrication once a month.

The Wahl Premium Set of 3 short guards gives you the three short lengths you need for a fade: 1.5, 3, and 4.5 mm. They are part of the Wahl Premium guard line and attach to the blade with metal clips. You can use them with Wahl clippers such as the Magic Clip, Legend, or Super Taper.

What they do for you

• Create short, gradual transitions: 1.5, 3, and 4.5 mm, with small steps between them.
• The guard won't pop off the blade: the metal Secure-fit clips hold it more securely and prevent it from coming loose during cutting.
• They withstand daily use longer: Wahl says the material is 70% more durable than standard guards.
• Move them from one clipper to another: the brand makes them compatible with 8 Wahl models, from the Super Taper to the Balding.

How to use them at home

1. Turn off the clipper and brush the hair off the blade.
2. Choose the length. If you're not sure, start with 4.5 mm: you can always cut it shorter, but you can't make it longer again.
3. Place the guard on the blade and press until the clip snaps into place, then check that it's secure.
4. Cut against the direction of hair growth, using even strokes without pressing on the scalp.
5. Finally, clean the guards with a small brush and keep them dry and stored in a safe place.

For what type of clipper

Wahl makes them compatible with the Super Taper, Super Taper Cordless, Legend, Legend Cordless, Senior Cordless, Magic Clip, Magic Clip Cordless, and Balding. They are for the short areas of the fade, the neckline, the sides, and around the ears. They do not cover longer lengths: for over 4.5 mm, you need a set with larger numbers. They are not for outline clippers.

Specifications

What else you need

• Wahl Magic Clip Cordless Clipper
• Wahl Legend Clipper
• Wahl Balding Clipper
• Complete Wahl Premium Guard Set
• Wahl Clipper Blade Oil

ProBeauty Tip. For a clean fade, work from the bottom up: 1.5 mm at the base, 3 mm in the middle, and 4.5 mm toward the top. Each pass starts slightly lower than the previous one ended, so the line between the areas blends out.

The Wahl Premium 10-Piece Guard Set is the Premium Cutting Guides set, with 10 guards from 1.5 to 25 mm, delivered in a storage bag. It is the complete set for those who cut their hair often at home: you have all the transitions for a fade, from the neck to the top. They attach to large Wahl clippers, such as Magic Clip, Legend, or Super Taper.

What it does for you

• You have all the lengths in a single set: 1.5, 3, 4.5, 6, 10, 13, 16, 19, 22, and 25 mm.
• The guard stays firmly on the blade: Secure Fit technology keeps it attached to the blade for a long time.
• Cutting is gentler on the skin: the contact surface and teeth are rounded.
• It retains its shape: the glass-fiber and mineral-reinforced plastic is durable and dimensionally stable.
• You keep them in one place, in the bag included in the set, so they don't get lost or scratched.

How to use them at home

1. Turn off the clipper and remove the hair from the blade.
2. Choose the length. If you are unsure, start with a longer guard and gradually go down.
3. Place the guard on the blade and press until it locks. Check that it is firmly attached before turning it on.
4. Cut against the direction of hair growth, using even strokes.
5. For a fade, change the guard one step at a time, from the bottom up.
6. After cutting, shake the guards, clean them with a brush, and put them back in the bag.

For what type of device

Wahl makes them compatible with Super Taper, Super Taper Cordless, Legend, Legend Cordless, Senior Cordless, Magic Clip, Magic Clip Cordless, and Balding. They are for clipper haircuts, from fades to longer haircuts. They are not for outline trimmers or for machines with slide-on blades, such as Kuno or ChromStyle.

Specifications

What else you need

• Wahl Magic Clip Cordless Clipper
• Wahl Legend Cordless Clipper
• Wahl Super Taper Clipper
• Wahl Premium Set with Short Guards
• Wahl Clipper Blade Oil
• Wahl Fade Brush

ProBeauty Tip. Arrange the guards on the table in order, from shortest to longest, before you start. For a fade, you change them often, so you won't have to search for the right length with the clipper in your hand.

Wahl Mini Fade Brush

Discover the secret to a perfect finish with the Wahl Mini Fade Brush, the ideal tool for professionals who appreciate fine details in fade haircuts. With a compact and ergonomic design, this brush is engineered to provide maximum control and precision in creating perfect gradients. Those looking to define sharp lines and create smooth transitions between different cutting levels will appreciate the Wahl Mini Fade Brush for its efficient operation and the impeccable results it delivers.

Wahl 5 Star Finale Foil and Blades 07043 is the replacement set for the Wahl Finale shaver: gold foil and blade assembly, in a single package. With it, the shaver shaves like new again. Wahl makes it exclusively for Finale.

What it does for you

• Shave without bumps, with hypoallergenic gold foil.
• Shaves very short: the ultra-thin foil allows a cutting length of 0.1 mm.
• Press very lightly: only light pressure is needed for a close shave.
• Shaver like new, because you replace the foil and blade assembly at the same time.
• Quick installation, with the detachable foil head.

How to use it at home

1. Turn off the shaver. Press the round button on the right and lift the flexible foil head.
2. Gently press the blade assembly and turn it 90 degrees. It comes out on its own.
3. Put in the new assembly, following the steps in reverse, then attach the new foil head.
4. Every 2–3 days, lightly lubricate the blades, dabbing them with a sponge soaked in oil.
5. After each use, put the protective cap over the foil.

For what type of shaver

It is the original part for the Wahl 5 Star Finale shaver. It does not fit the Vanish, Super Close, or Mobile Shaver, which have separate sets. If you only need the foil, Wahl also sells it separately, with code 07043-100.

Specifications

What else you need

• Wahl oil for lubricating the blades
• Wahl Blade Ice spray for shaver blades
• Another shaver from the 5 Star series: Wahl Vanish

ProBeauty tip. The sign that the set is worn out is simple: the shaver runs slower and the foil heats up. Then change the foil and blades together, not just the foil.

Enjoy the Perfect Shave with the Wahl Blades + Foil Set for Vanish Shaver

The Wahl Blades + Foil Set for Vanish Shaver is the ideal solution for a precise and comfortable shave. The foil is made from the highest quality hypoallergenic gold foil, ensuring a gentle and irritation-free experience. With an ultra-thin thickness, it allows for a cutting length of 0.1 mm, so you can achieve an extremely close shave without leaving bumps.

Key Features:

• Hypoallergenic Gold Foil: Made from the highest quality gold foil for a gentle and irritation-free shave.
• Very Small Cutting Length: The ultra-fine foil allows for a cutting length of only 0.1 mm, for a precise and uniform result.
• Easy to Use and Maintain: Requires only light pressure for a consistent shave. It is easy to change for regular cleaning and maintenance.

Opt for comfort and precision in every shave with the Wahl Blades + Foil Set for Vanish Shaver. Discover an irritation-free experience and an impeccable result!

The Wahl Cordless Magic Clip Staggertooth blade is the replacement blade for the Wahl Cordless Magic Clip clipper. It has alternating short and long teeth on the top blade, designed for fades without visible lines. You can replace it yourself with a screwdriver when the old blade no longer cuts cleanly.

What it does for you

• Fades without lines: alternating short and long teeth blend the transition between lengths.
• Good angle for fades: Wahl designed the lower blade like a surgical blade for the optimal fading angle.
• Cuts very short: cutting length ranges from 0.5 to 1.2 mm.
• Works close to the skin: the blade can be adjusted to zero overlap.
• Firmer cut: Wahl UK says the staggered teeth provide a more substantial cut and a uniform blend.

How to use it at home

1. Turn off the clipper and remove it from the power outlet or charging stand.
2. Unscrew the screws on the old blade and remove it.
3. Place the new blade on the head, with the adjustment lever caught in the moving blade.
4. Put the screws back in place and tighten them just enough so you can still move the blade.
5. Align the blades: the moving blade must not protrude in front of the fixed blade. Only then tighten the screws completely.
6. Put a few drops of oil on the teeth and turn on the clipper for a few seconds.

For what type of device

This is the Cordless Magic Clip blade, according to Wahl Europe and Wahl UK. It is good for gradual fades, down to almost the skin, and for blending. It is not for the Magic Clip corded, Super Taper, or Senior. Wahl has other blades for those.

Specifications

What else you need

• Wahl Cordless Magic Clip Clipper
• Wahl Cordless Magic Clip Black Clipper
• Gold Staggertooth Blade with Titanium Coating and DLC
• Wahl Oil for Lubricating Blades
• Wahl Blade Ice Spray that Cools and Cleans Blades

ProBeauty Tip. When fading, start with the blade slightly retracted, not directly at zero. Gradually bring the blades closer, only over the shortest area. The skin stays calmer, and the transition looks cleaner.

Experience Power and Precision with the Wahl Magic Clip Gold Cordless Blade Set

The Wahl Magic Clip Gold Cordless blade set is the perfect choice for precise and detailed hairstyles. The Titanium blade offers top-tier durability and performance with every use. The 40mm blade width and adjustable cutting length between 0.8mm and 2.5mm ensure flexibility in creating various hairstyling looks.

Key Features:

• High-Quality Material: The Titanium blade guarantees durability and resistance over time.
• Adjustable Length: You can adjust the cutting length between 0.8mm and 2.5mm to achieve precise and varied cuts.
• Perfect Compatibility: Suitable for use with the Wahl Cordless Magic Clip Gold, ensuring seamless integration and optimal performance.
• Included Accessories: Along with the blade set, you also receive screws for fastening, oil for maintenance, and detailed instructions to keep the blade in optimal condition.

Discover the versatility and power of the Wahl Magic Clip Gold Cordless Blade Set for the best hairstyling results!

Personalize Your Cuts with the Wahl Balding Clipper Guide Comb Set

The set of 2 Wahl Professional intermediate guide combs is the perfect choice for adjusting and personalizing cuts with your Wahl clippers. Made from high-quality hard plastic, these guide combs are durable and deliver consistent performance with every use.

Key Features:

• Durable Material: Constructed from high-quality hard plastic for durability and long-lasting resistance.
• Universal Compatibility: The set includes 2 guide combs with widths of 1.5mm and 4.5mm, perfect for all professional Wahl clippers.
• Ideal for Precise Cuts: Specifically designed to provide precise and uniform lengths in hairstyling.
• Easy to Use and Maintain: Simple to attach and clean for a hassle-free grooming experience.

Enhance the performance of your Wahl clippers with the Balding Clipper Guide Comb Set. Ensure every cut is precise and your hairstyle impeccable!

Wahl Super Close Foil and Blade 3616-7000 is the replacement set for the Wahl Super Close shaver: a new foil and blade. With it, the shaver shaves precisely again, without having to buy another shaver. It is made only for Super Close.

What it does for you

• Precise shaving returns, with new, original Wahl foil and blade.
• The shaver no longer pulls hairs: the manual says this happens when the foil and blade are worn.
• Shave at 0.05 mm, with the same fine foil that comes with the shaver.
• Your skin is safe: a damaged foil can injure the skin, and the new set replaces it.
• It can be installed at home, without tools, in a few steps.

How to use it at home

1. Turn off the shaver and remove the protective cap.
2. Remove the foil shaving head and pull the old foil out of it.
3. Hold the new foil only by the edges. You can curve it, but do not bend it. Push it into the head until it stops.
4. Grip the old blade from the side and carefully remove it from the holder. Press the new blade onto the holder and check that the spring has remained in place.
5. Put the shaving head back in place until it locks, then the cap.

For what type of shaver

It is the original part for the Wahl Super Close shaver, with a 0.05 mm foil and a cutting width of 45 mm. It does not fit the Mobile Shaver or the Vanish, which have separate sets.

Specifications

What else you need

• The Wahl Super Close shaver, for which the set is made
• Wahl Fade Brush, for the hairs left after shaving
• Wahl Detailer Li Trimmer, for shortening the hair before shaving

ProBeauty Tip. Do not rush the replacement: first clean the shaving head thoroughly. If it still shaves poorly or pulls hairs, it is time for the new set.

The Wahl Fade Brush is a barbering brush that removes cut hair from the scalp during a fade. It has soft but firm bristles and a classic teardrop-shaped wooden handle. Without cut hair clinging to the skin, you can clearly see the transitions and quickly spot mistakes.

What it does for you

• Clearly see every transition from one length to another, because cut hair no longer clings to the scalp.
• Correct lines or longer areas in time before finishing the haircut.
• Soft but firm bristles lift short hairs without pressing too hard.
• Easy to control thanks to the teardrop-shaped handle, which fits comfortably in the hand.

How to use it at home

1. After each pass with the clipper, stop and brush the area you have worked on.
2. Move the brush gently against the direction of hair growth to lift the cut hairs.
3. Look at the transition in good light and correct it with the clipper where necessary.
4. At the end, shake the brush and remove the remaining hairs from between the bristles.

For what type of haircut

For fades and short haircuts done with clippers, where the transitions need to be clean. It is also useful for the neckline and temples. It is not a brush for combing or styling long hair.

Specifications

What else you need

• Wahl Magic Clip Cordless Professional Hair Clipper
• Wahl Detailer Li Trimmer
• Wahl Mini Fade Brush
• Wahl Neck Brush
• Wahl Blade Ice Spray for blades

ProBeauty Tip. Brush after each guide comb, not just at the end. A fade looks best on a clean scalp, and small mistakes are easier to fix on the spot.

Wahl Special Blade Oil is a maintenance oil for hair clipper and trimmer blade sets, in a 200 ml bottle. Wahl says it is suitable for all hair clipper and trimmer blade sets. Regular lubrication helps the blades cut better and last longer.

What it does for you

• The blades cut better because the oil reduces friction between the fixed and moving blades.
• The blades last longer, with less wear and less heat during each cut.
• One oil for all machines: it works with any hair clipper or trimmer blade set.
• Large 200 ml bottle, ideal if you have several machines or cut hair frequently.

How to use it at home

1. Turn off the machine and brush out any hair trapped between the blade teeth.
2. Place 3 drops along the top edge of the blades and one drop at each end.
3. Turn on the machine for about 10 seconds to allow the oil to reach between the blades.
4. Wipe off any excess with a clean cloth. Lubricate the blades before putting the machine away for an extended period.

What type of device is it for?

For hair clipper and trimmer blade sets, including edgers. This oil is for blades only. Do not use it on hair, beards, or skin, and do not put it inside the machine.

Specifications

What else you may need

• Wahl Blade Ice spray for blades
• Wahl Magic Clip Cordless hair clipper
• Wahl Senior 2.0 hair clipper
• Wahl Detailer Li edger
• Wahl fade brush

ProBeauty tip. If the machine starts pulling hair or making more noise, the first thing to try is lubricating it. Often the blade is not dull, it is simply dry.

The Wahl Neck Brush is a barbering brush used to remove stray hairs from the neck and nape after a haircut. Wahl calls it an essential accessory for a clean finish, right down to the final touch-ups. The front is black and features the Wahl logo.

What it does for you

• The neck stays clean after a haircut, without stray hairs poking out from under the collar.
• Clearly see the neckline when making final touch-ups.
• Quickly clean the shoulders and cape before removing it.
• The client leaves without hair on their clothes, just like they would after a visit to the barber.

How to use it at home

1. When you finish cutting, leave the cape around the shoulders.
2. Gently pass the brush over the neck and nape, from top to bottom, towards the cape.
3. Clean around the ears and along the hairline, then check for any final touch-ups.
4. Brush the hair off the cape, remove it, and tap the brush to remove any remaining hair.

What it is best for

For finishing any haircut done with clippers or scissors, for both men and women, and for cleaning up the beard line. It is not a shaving brush and is not designed for applying foam or cream.

What else you need

• Wahl Striped Haircutting Cape
• Wahl Black Haircutting Cape
• Wahl Fade Brush
• Wahl Magic Clip Cordless Clippers

ProBeauty Tip. Pass the brush twice: once before the final touch-up to see the neckline, and once more at the end. The second pass picks up any hairs that have fallen onto the neck in the meantime.

The Wahl Hairdressing Cape X is a gray and white striped haircutting cape in the style of classic barber shops. It features the Wahl Professional logo and five gold stars embroidered on it. Place it over the shoulders of the person you are cutting hair for, so that the cut hair falls onto the cape, not on their clothes.

What it does for you

• Clothes stay clean, because the cut hair falls onto the cape and you shake it off at the end.
• Looks like a barber shop, with gray and white stripes and Wahl Professional embroidery.
• Your hands are free: the cape fastens around the neck and does not need to be held.
• You can reuse it for every haircut, after shaking off the hair.

How to use it at home

1. Have the client sit in the chair and turn their shirt collar inside out.
2. Place the cape over their shoulders and fasten it around the neck, loosely enough to fit a finger.
3. Cut hair as usual and occasionally brush the hair off their shoulders with a neck brush.
4. At the end, clean the neck, unfasten the cape, and fold it inward.
5. Shake it out over a basket or outdoors and wash it according to the care label.

For what type of work

For clipper or scissor haircuts, edging, and beard trimming, at home or in a barber shop. Wahl does not publish data about the material or dye resistance on the product page. For dyeing or bleaching, use a cape made for color.

What else you need

• Wahl Neck Brush
• Wahl Fade Brush
• Wahl Water Sprayer
• Wahl Magic Clip Cordless Clipper

ProBeauty Tip. Place a small towel or a strip of paper around the neck, under the cape. The short hairs from edging no longer get under the collar and the client does not feel pricks all day.

The MAGIC BLADE Standard blade set is made of the highest quality stainless steel, performing extremely well thanks to precise grinding technology. The blade has an adjustable cutting height between 0.7 and 3 mm, with a blade width of 46 mm and a cutting width of 40 mm. The tooth width of the upper blade is 1.3 mm, and the lower blade is 1.6 mm. The blade set is easily interchangeable and allows for quick cleaning and changing to available options.

The set is compatible with the following devices:

1854/1855/1870/1871/1872/1873/1874/1876/1877/1884/1885/1886/1887/1888/8843L.

The package contains: 1 cutting head

The Wahl Hairdressing Cape is a black haircutting cape with the Wahl logo. Place it over the shoulders of the person you are cutting hair for, so that the cut hair falls onto it instead of their clothes. On black, hair of any color is easily visible and can be quickly brushed off.

What it does for you

• Clothes stay clean while you cut hair, even during haircuts with a lot of hair removed.
• Immediately see fallen hair on the shoulders and brush it off before it reaches the neck.
• Looks neat, with simple black and the Wahl logo.
• Use it for every haircut: brush it off after each client and it is ready for the next one.

How to use it at home

1. Seat the client with their back straight and turn their collar inside out.
2. Place the cape over their shoulders and fasten it around the neck without tightening it.
3. Spread it over their lap so that hair does not fall into their lap.
4. At the end, brush the neck with the neck brush, remove the cape, and fold it inward.
5. Shake it out over a basket or outdoors and wash it according to the care label.

For what type of work

For clipper or scissor haircuts, outlining and beard trimming for men, women, and children. Wahl does not publish information about the material or dye resistance on the product page. For dyeing or bleaching, use a cape designed for color.

What else you need

• Wahl Neck Brush
• Wahl Haircutting Comb Set
• Wahl Flairosol Water Sprayer
• Wahl Magic Clip Cordless Clipper

ProBeauty Tip. On a black cape, blonde or white hairs are immediately visible. Check the shoulders before the final touch-up and brush them off, so the hairs do not slide down the neck when you remove the cape.

The Wahl Super Taper Standard Taper Blade is the universal replacement blade for the Wahl Super Taper, Cordless Super Taper, Magic Clip, and Cordless Senior. Wahl describes it as a versatile blade for removing large volumes of hair and for any routine clipper work. It is installed using a screwdriver.

What it does for you

• Quickly removes large volumes of hair: designed for removing a large amount of hair.
• A blade for the whole haircut: suitable for general cutting, with or without guide combs.
• Cutting length of 1 to 2 mm, with a cutting width of 46 mm.
• Compatible with four Wahl clippers: Super Taper, Cordless Super Taper, Magic Clip, Cordless Senior.

How to use it at home

1. Turn off the clipper and unplug it or remove it from the charging stand.
2. Unscrew the screws on the old blade and remove it.
3. Place the new blade on the clipper head, with the drive lever engaged in the moving blade.
4. Replace the screws and tighten them just enough so that you can still move the blade.
5. Align the blades: the moving blade must not protrude beyond the fixed blade. Only then tighten the screws completely.
6. Apply a few drops of oil to the teeth and run the clipper for a few seconds.

For which type of clipper

For the Wahl Super Taper and Cordless Super Taper, which come with it from the factory, and for the Magic Clip and Cordless Senior, according to Wahl Europe. It is the everyday working blade. For skin fades, Wahl has dedicated blades with a shorter cut.

Specifications

What else you need

• Wahl Super Taper Clipper
• Wahl Cordless Super Taper Clipper
• Wahl Magic Clip Corded Clipper
• Wahl Cordless Senior Clipper
• Wahl Oil for lubricating the blades
• Wahl Blade Ice Spray that cools and cleans the blades

ProBeauty Tip. Keep a second Standard Taper blade installed on an old clipper. Use it only for bulk removal, and the fade blade will stay sharp longer.

The Wahl Legend Wedge Blade is the replacement blade for Wahl Legend and Cordless Legend clippers. Its deeper teeth grip hair better, so you cut faster and have a wider fade range. Attach it with the screwdriver and screws included in the package.

What it does for you

• Cut faster: deeper teeth pull more hair between the blades on each pass.
• Fade over a wider range: Wahl UK talks about the extended blade glide technology.
• Blend evenly: Crunch technology gives a bolder cut and even transitions.
• Work close to the skin: it can be adjusted to zero overlap.
• Cutting length from 0.7 to 1.7 mm, over a width of 46 mm.

How to use it at home

1. Turn off the clipper and unplug it or remove it from the charging station.
2. Unscrew the screws of the old blade and remove it.
3. Place the new blade on the head, with the training lever caught in the moving blade.
4. Put the screws back in place and tighten them just enough so you can still move the blade.
5. Align the blades: the moving blade must not stick out in front of the fixed one. Only then tighten the screws all the way.
6. Put a few drops of oil on the teeth and turn on the clipper for a few seconds.

For what type of device

For Wahl Legend and Wahl Cordless Legend, according to Wahl Europe and Wahl UK. It is the blade these clippers come with from the factory. Choose it for soft fades, blending, and general cutting. It does not fit the Magic Clip, Senior, or Super Taper.

Specifications

What else you need

• Wahl Legend corded clipper
• Wahl Cordless Legend clipper
• Wahl oil for lubricating the blades
• Wahl Blade Ice spray that cools and cleans the blades

ProBeauty tip. Deep teeth collect more hair between the blades. After each client, blow on or brush the blade and put a drop of oil. The clipper stays quiet and does not overheat.

Wahl Cutting Combs is a set of 12 cutting combs in different colors. Each comb has one side with fine teeth and one with wide teeth, just like at the hair salon. Use them for cutting with scissors, with clippers, or for styling afterwards.

What they offer you

• You always have a clean comb at hand, because the set contains 12 pieces.
• One comb, two uses: wide teeth for brushing and detangling, fine teeth for precise sections.
• They are easy to distinguish by color, if you cut the hair of several people in the family.
• You work like at the hair salon with Wahl cutting combs, not with a pocket comb.

How to use them at home

1. Lightly dampen the hair if you are cutting with scissors.
2. Comb the hair with the wide-tooth side to remove knots.
3. Take the cutting sections with the fine-tooth side and hold the strands taut between your fingers.
4. After each client, wash the comb you used and set it aside to dry.

For what type of haircut

For any haircut with scissors or clippers, for short and medium hair. For the clipper-over-comb technique, a special comb works better, such as the Wahl Speed Comb. They are not combs for very thick and tangled hair.

What else you need

• Wahl Speed Comb
• Wahl Water Sprayer
• Black Wahl Hairdressing Cape
• Wahl Magic Clip Cordless Clipper

ProBeauty Tip. Choose a color for each person in the house whose hair you cut. Everyone has their own comb, and you no longer have to wash it in a hurry between two clients.

The Wahl Water Spray Bottle Flairosol is a black water sprayer that produces a fine mist and a continuous spray. It uses no propellants. It works in any position, 360°, even when held upside down.

What it does for you

• The hair is moistened evenly because the mist is fine and does not leave large droplets.
• You finish faster: one press delivers a continuous spray, not just a single puff.
• You can easily reach the nape of the neck and under the chin because it works even when held upside down.
• You do not need propellants, just water and your hand.

How to use it at home

1. Fill the container with clean water and screw the cap on tightly.
2. Press the trigger several times until the spray starts.
3. Hold it at a distance from the head and spray the entire area you are going to cut.
4. Comb the hair so that the water is distributed evenly, then start cutting.

For what type of work

For cutting with scissors, combing, and styling all types of hair. It is especially practical for thick or long hair, where you need a lot of water quickly. It is not designed for styling products or cleaning solutions.

What else you need

• Wahl Haircutting Comb Set
• Wahl Speed Comb
• Black Wahl Haircutting Cape
• Wahl Neck Brush

ProBeauty Tip. Spray from a distance, not right next to the head. The fine mist settles more evenly, and the client does not suddenly feel cold water on their scalp.

The Wahl Stealth Beret Black Chrome Blade is the replacement blade for Wahl Beret and Stealth Beret trimmers. It features a black chrome precision blade and a quick-change system. It cuts at 0.4 mm, for close-to-skin edging and fine details.

What it does for you

• Close-to-skin edging: cuts at 0.4 mm.
• Fine details: Wahl makes it for any finishing work.
• Change it in a few seconds: it has a quick-change system, no screwdriver needed.
• Black chrome precision blade, like on the Stealth Beret trimmer.

How to use it at home

1. Turn off the trimmer.
2. Remove the old blade from the quick-change system, as shown in the trimmer instructions.
3. Place the new blade in position and press until it locks.
4. Put a drop of oil on the teeth and run the trimmer for a few seconds.
5. Work the edges with the skin stretched.
6. At the end, brush the teeth and lubricate again.

For what type of device

For Wahl Beret and Stealth Beret trimmers, according to Wahl Europe. It is the blade for edging, beards, and details. It does not fit the Detailer, Hi-Viz, or hair clippers.

Specifications

What else you need

• Wahl Beret Stealth Trimmer
• Wahl Beret Trimmer
• Wahl Oil for lubricating the blades
• Wahl Blade Ice Spray that cools and cleans the blades

ProBeauty Tip. Since it can be changed without a screwdriver, it is easy to keep two blades. One for the beard, the other for hair edging: you clean them one by one and work without breaks.

Wahl No. 1 Black 3 mm Guard is the standard Wahl 3 mm guard, sold separately. Wahl says that No. 1 leaves approximately 3 mm of hair, for very short haircuts. Get it to replace a lost or broken one, or to have a second piece on hand.

What it does for you

• Cuts uniformly at 3 mm over the entire area you pass the clipper over.
• Use it for very short haircuts, like buzz cuts.
• Complete the set without having to buy all 8 guards again.
• Works on several Wahl clippers: the brand lists it as compatible with 8 models, from the Super Taper to the Balding.

How to use it at home

1. Turn off the clipper and brush the hair off the blade.
2. Place the guard on the blade and press until it clicks into place. Check that it is secure before turning it on.
3. Cut against the direction of hair growth, using even strokes.
4. Pass over the same area several times to catch the lying hairs.
5. After cutting, clean it with a small brush. From time to time, wash it with warm water and mild soap and let it dry completely.

For what type of clipper

Wahl lists it as compatible with the Super Taper, Super Taper Cordless, Legend, Legend Cordless, Senior Cordless, Magic Clip, Magic Clip Cordless, and Balding. You receive a single guard, not a set. It is not for outline clippers or clippers with slide-on guards, such as the Kuno or ChromStyle.

Specifications

What else you need

• Wahl No. 2 Guard, longer
• Complete Wahl Premium Guard Set
• Wahl Magic Clip Cordless Clipper
• Wahl Clipper Blade Oil

ProBeauty Tip. No. 1 is the last step before the blade without a guard. For a fade, make the transition to No. 2 (6 mm) with short strokes, pulling the clipper out of the hair, so that no line remains.

The Wahl Detailer T-Wide blade is the replacement blade for Wahl Detailer, Wide Detailer, Cordless Detailer Li, and Hero trimmers. It has an extra-wide 38 mm carbon steel T-blade. It cuts at 0.4 mm and is adjustable to zero overlap for clean lines.

What it does for you

• Clean lines: Wahl designed it for a very close trim and a clean line.
• Work close to the skin: it cuts at 0.4 mm and is adjustable to zero overlap.
• Finish quickly: the 38 mm blade covers a wide area with each pass.
• Works for designs too: it is good for details, contours, and hair designs.
• Self-sharpening, says Wahl Europe on the T-Wide blade page.

How to use it at home

1. Turn off the trimmer and unplug it or remove it from the charging station.
2. Unscrew the screws on the old blade and remove it.
3. Place the new blade on the head, with the adjustment lever caught in the moving blade.
4. Put the screws back in place and tighten them just enough so that you can still move the blade.
5. Align the blades: the moving blade must not protrude in front of the fixed blade. Only then tighten the screws completely.
6. Put a few drops of oil on the teeth and turn on the trimmer for a few seconds.

For what type of device

For Wahl trimmers with a T-Wide blade: Detailer, Wide Detailer, Cordless Detailer Li, and Hero. It is the blade for contours, beards, and designs. It is not for hair clippers or the Hi-Viz, which has its own blade.

Specifications

What else you need

• Wahl Wide Detailer trimmer
• Wahl Cordless Detailer Li trimmer
• T-Wide Gold blade, with a titanium and DLC coating
• Wahl oil for lubricating the blades
• Wahl Blade Ice spray that cools and cleans the blades

ProBeauty tip. Carbon steel holds its edge well, but it does not like moisture. After disinfecting or using Blade Ice, wipe the blade and put a drop of oil on it before putting it away.

The Wahl Detailer T-Blade is the replacement T-blade for Wahl Detailer, Cordless Detailer Li, and Hero trimmers. It has a 35 mm blade and cuts at 0.4 mm. It is adjustable to zero overlap, for precise contours.

What it does for you

• Precise contours: 35 mm T-blade, designed for detailing.
• Very short cut: 0.4 mm.
• Zero control: adjustable to zero overlap.
• Easily reach small areas: it is narrower than the T-Wide blade.
• Ready to mount: comes with oil and screws, according to Wahl UK.

How to use it at home

1. Turn off the machine and unplug it or remove it from the charging stand.
2. Unscrew the screws of the old blade and remove it.
3. Place the new blade on the head, with the drive lever caught in the moving blade.
4. Put the screws back in place and tighten them lightly, so you can still move the blade.
5. Align the blades: the moving blade must not protrude in front of the fixed one. Only then tighten the screws completely.
6. Put a few drops of oil on the teeth and turn on the machine for a few seconds.

For what type of device

For Wahl Detailer, Wide Detailer, Cordless Detailer Li, Hero, and 8900 trimmers, according to Wahl UK and Wahl Europe. It is the blade for contours, beards, and details. It does not fit the Beret, Hi-Viz, or hair clippers.

Specifications

What else you need

• Wahl Detailer Wide Trimmer
• Wahl Cordless Detailer Li Trimmer
• T-Wide Blade for Detailer
• Wahl Oil for lubricating the blades
• Wahl Blade Ice Spray that cools and cleans the blades

ProBeauty Tip. If you work a lot on beards, keep both this blade and a T-Wide one. With the wide one you do the cheeks quickly, with the narrow one you finish the corners of the mouth and the mustache.

The Wahl Speed Comb is a black cutting comb designed for clipper-over-comb cutting, tapering, and flat tops. It features hook teeth that hold the hair evenly taut and a clipper guide. It is a patented Wahl design, made in the USA.

What it does for you

• Hair stays in place as you cut because the hook teeth hold it with even tension.
• The line is even when using the clipper-over-comb technique, thanks to the clipper guide.
• You finish faster because the comb catches more hair in a single pass.
• One comb for three techniques: clipper-over-comb cutting, tapering, and flat tops.

How to use it at home

1. Comb the hair in the direction you want to cut.
2. Lift a section with the comb, teeth facing you, at the desired angle.
3. Run the clipper along the guide and cut the hair that extends beyond the teeth.
4. Move the comb to the next section, taking a little of the already cut area with it.

For what type of haircut

For short haircuts with transitions between lengths: tapering, flat tops, and side areas worked with the clipper-over-comb technique. It is also useful with scissors. Use a regular comb for detangling or styling long hair.

Specifications

What else you need

• Wahl Magic Clip Cordless Clipper
• Wahl Senior 2.0 Clipper
• Wahl Cutting Comb Set
• Wahl Fade Brush
• Wahl Water Sprayer

ProBeauty tip. If you are starting with the clipper-over-comb technique, work with the clipper turned off first. Practice the movement of the comb and clipper together, then turn on the clipper.

The Wahl Magic Clip 2 Hole Blade is the replacement blade for the Wahl Magic Clip Corded, Super Taper, Cordless Super Taper, and Cordless Senior. It has trimmer-like teeth and cutting length for short, clean results. It is ideal for completely shaving the head and creating short fades.

What it does for you

• Cut very short: cutting length ranges from 0.5 to 1.2 mm.
• Clean, trimmer-like results: the teeth are similar to those of a trimmer.
• Short fades: Wahl recommends it for close fades and completely shaving the head.
• One blade for four machines: Magic Clip Corded, Super Taper, Cordless Super Taper, and Cordless Senior.

How to use it at home

1. Turn off the machine and unplug it or remove it from the charging stand.
2. Unscrew the screws on the old blade and remove it.
3. Place the new blade on the clipper head, with the adjustment lever engaged in the moving blade.
4. Replace the screws and tighten them just enough so that you can still move the blade.
5. Align the blades: the moving blade must not protrude beyond the fixed blade. Only then tighten the screws completely.
6. Apply a few drops of oil to the teeth and run the machine for a few seconds.

For which type of machine

For Wahl machines with a fixed blade, as designated by Wahl: Magic Clip Corded, Super Taper, Cordless Super Taper, and Cordless Senior. Choose it for short fades and completely shaved heads. It is not for the Cordless Magic Clip, Legend, or Senior 2.0, which have their own blades.

Specifications

What else you need

• Wahl Magic Clip Corded Clippers
• Wahl Super Taper Clippers
• Wahl Cordless Super Taper Clippers
• Wahl Cordless Senior Clippers
• Wahl Blade Oil for lubricating the blades
• Wahl Blade Ice Spray for cooling and cleaning the blades

ProBeauty Tip. If you also have a Super Taper, you can keep the 2 Hole blade on it for short areas. Keep the Magic Clip for the rest of the haircut and avoid changing the blade for every client.

The Wahl Premium Set of 8 hair clipper guards in a case is part of the Premium Cutting Guides line and includes 8 guards ranging from 3 to 25 mm. They come in an organizer case where each length has its own place. It is the perfect set if you cut your hair often at home and want the guards always close at hand and neatly organized.

What it does for you

• Covers standard clipper cuts: 3, 6, 10, 13, 16, 19, 22 and 25 mm.
• Helps you quickly find the right length, as each guard has its own place in the case.
• The guard stays securely in place: Secure Fit technology keeps it on the blade for a long time.
• Makes cutting more comfortable: Rounded teeth glide through the hair without scratching.
• Is durable and retains its shape, thanks to glass and mineral-filled plastic.

How to use them at home

1. Turn off the clipper and remove hair from the blade.
2. Take the desired length out of the case. If you are unsure, start with a longer one.
3. Place the guard on the blade and press down until it locks. Check that it is securely attached.
4. Cut against the direction of hair growth using even strokes.
5. Finally, clean the guard with a brush and put it back in its place.

For which type of clipper

The Wahl Premium Cutting Guides product sheet states that the guards fit all Wahl corded clippers. For the same line, Wahl also lists the Super Taper, Super Taper Cordless, Legend, Legend Cordless, Senior Cordless, Magic Clip, Magic Clip Cordless and Balding models. They are not for outline clippers or clippers with slide-on guards, such as Kuno or ChromStyle.

Specifications

What else you need

• Wahl Legend Clipper
• Wahl Super Taper Clipper
• Wahl Magic Clip Cordless Clipper
• Wahl Premium Set with Short Guards
• Wahl Clipper Blade Oil

ProBeauty Tip. Put the guard back in the case as soon as you are finished with it, not at the end. When cutting a fade, you change lengths often, so you won't mix up 13 mm with 16 mm, which look almost the same.

High-quality cotton towel, black, is ideal for any salon, barbershop, or for personal use at home. Dimensions: 94x48cm

The Wahl Balding Replacement Blade is the blade for the Wahl Balding clipper. It has trimmer-like teeth and a cutting length of 0.5 mm, for bald heads and skin fades. It is adjusted to zero overlap, so you can work very close to the skin.

What it does for you

• Bald head and skin fade: Wahl designed it for bald fades and skin fades.
• Short, clean cut: the trimmer-like teeth cut at 0.5 mm.
• Zero control: it is adjusted to zero overlap for results close to the skin.
• Quickly cover the head: the cutting width is 46 mm.
• Ready to install: comes with oil and screws, according to Wahl UK.

How to use it at home

1. Turn off the clipper and unplug it or remove it from the charging station.
2. Unscrew the screws on the old blade and remove it.
3. Place the new blade on the clipper head, with the adjustment lever caught in the moving blade.
4. Put the screws back in place and tighten them just enough so that you can still move the blade.
5. Align the blades: the moving blade must not protrude in front of the fixed blade. Only then tighten the screws completely.
6. Put a few drops of oil on the teeth and turn on the clipper for a few seconds.

For what type of device

For the Wahl Balding clipper, according to Wahl Europe and Wahl UK. It is the blade for bald heads, skin fades, and the shortest area of a fade. It is not a general-purpose cutting blade or for long hair.

Specifications

What else you need

• Wahl Balding Clipper
• Wahl Guard for the Balding Clipper
• Wahl Oil for lubricating the blades
• Wahl Blade Ice Spray that cools and cleans the blades

ProBeauty Tip. For a bald head, first pass the clipper in the direction of hair growth, then in the opposite direction. The first pass removes the bulk, the second leaves the skin smooth without insisting on the same area.

Wahl No. 5 Black 16 mm Guard is the standard Wahl 16 mm guard, sold separately. Wahl says that No. 5 leaves approximately 16 mm of hair, for a longer crew cut and for fade haircuts. Get it to replace a lost or broken one, or to have a second one on hand.

What it does for you

• Cuts uniformly at 16 mm over the entire area you pass over with the machine.
• Use it for a longer crew cut and fade haircuts.
• Complete the set without having to buy all 8 guards again.
• Works on several Wahl machines: the brand lists it as compatible with 8 models, from the Super Taper to the Balding.

How to use it at home

1. Stop the machine and brush the hair off the blade.
2. Place the guard on the blade and press until it clicks into place. Check that it is secure before you start.
3. Cut against the direction of hair growth, with even strokes.
4. Pass over the same area several times to catch the lying hairs.
5. After cutting, clean it with a small brush. From time to time, wash it with warm water and mild soap and let it dry completely.

For what type of machine

Wahl lists it as compatible with the Super Taper, Super Taper Cordless, Legend, Legend Cordless, Senior Cordless, Magic Clip, Magic Clip Cordless, and Balding. You receive a single guard, not a set. It is not for outline machines or for machines with slide-on guards, such as the Kuno or ChromStyle.

Specifications

What else you need

• Wahl No. 4 guard, shorter
• Wahl No. 6 guard, longer
• Complete Wahl Premium guard set
• Wahl Magic Clip Cordless hair clipper
• Wahl oil for hair clipper blades

ProBeauty tip. For a long fade, use No. 5 on the top of the sides and No. 4 (13 mm) lower down. Short strokes, upwards and outwards.

The Wahl 8-piece black guard set includes plastic guards 1–8, from 3 to 25 mm. Attach them to the clipper to increase the cutting length and trim evenly to your chosen length. It is the basic set for trimming at home, with all the usual sizes.

What it does for you

• You have all the basic sizes: 3, 6, 10, 13, 16, 19, 22 and 25 mm.
• Trim evenly, because the guard keeps the blade at the same distance from the scalp.
• Create fades by moving from one size to the next.
• Replace lost or broken guards on your clipper all at once.

How to use them at home

1. Turn off the clipper and clear the hair from the blade.
2. Choose a size. If you are unsure, start with a larger one: you can always cut more off.
3. Place the guard on the blade and press until it clicks into place. Check that it is secure.
4. Cut against the direction of hair growth using even strokes.
5. After trimming, clean the guards with a small brush and keep them dry in a box or bag.

For which type of clipper

Wahl UK says that the set fits all taper clippers. It is not for outline clippers or clippers that use slide-on guards, such as Kuno or ChromStyle. If you do not know what type of blade your clipper has, message us the model before ordering.

Specifications

What else you need

• Wahl Super Taper Clipper
• Wahl Legend Clipper
• Wahl Magic Clip Cordless Clipper
• Wahl Clipper Blade Oil
• Wahl Fading Brush

ProBeauty Tip. All the guards are black, so lay them out on the table in order, from size 1 to size 8, before you start. When creating a fade, you change guards frequently, so this helps prevent accidentally picking a smaller size.

Wahl No. 3 Black 10 mm Guard is the standard Wahl 10 mm guard, sold separately. Wahl says that No. 3 leaves approximately 10 mm of hair, for a short, classic haircut. Get it to replace a lost or broken one, or to have a second one on hand.

What it does for you

• Cuts uniformly at 10 mm over the entire area you pass over with the clipper.
• Use it for a short, classic haircut.
• Complete your set without having to buy all 8 guards again.
• Works with several Wahl clippers: the brand lists it as compatible with 8 models, from the Super Taper to the Balding.

How to use it at home

1. Turn off the clipper and brush the hair off the blade.
2. Place the guard on the blade and press down until it clicks into place. Check that it is secure before turning it on.
3. Cut against the direction of hair growth, using even strokes.
4. Pass over the same area several times to catch the lying hairs.
5. After cutting, clean it with a small brush. From time to time, wash it with warm water and mild soap and let it dry completely.

For what type of clipper

Wahl lists it as compatible with the Super Taper, Super Taper Cordless, Legend, Legend Cordless, Senior Cordless, Magic Clip, Magic Clip Cordless, and Balding. You receive a single guard, not a set. It is not for outline clippers or clippers with slide-on guards, such as the Kuno or ChromStyle.

Specifications

What else you need

• Wahl No. 2 guard, shorter
• Wahl No. 4 guard, longer
• Complete Wahl Premium guard set
• Wahl Magic Clip Cordless clipper
• Wahl clipper blade oil

ProBeauty tip. No. 3 is a good starting point for the top. On the sides, go down to No. 2 (6 mm), then blend the areas with No. 3 held slightly at an angle.

Wahl No. 2 Black 6 mm Guard is the standard Wahl 6 mm guard, sold separately. Wahl says that No. 2 leaves approximately 6 mm of hair: a short haircut, but slightly longer. Get it to replace a lost or broken one, or to have a spare on hand.

What it does for you

• Cuts uniformly at 6 mm over the entire area you pass the clipper over.
• Use it for a short haircut, slightly longer than a buzz cut.
• Complete your set without having to buy all 8 guards again.
• Works with several Wahl clippers: the brand lists it as compatible with 8 models, from the Super Taper to the Balding.

How to use it at home

1. Turn off the clipper and brush the hair off the blade.
2. Place the guard on the blade and press until it clicks into place. Check that it is secure before turning it on.
3. Cut against the direction of hair growth, using even strokes.
4. Pass over the same area several times to catch the lying hairs.
5. After cutting, clean it with a small brush. From time to time, wash it with warm water and mild soap and let it dry completely.

For what type of clipper

Wahl lists it as compatible with the Super Taper, Super Taper Cordless, Legend, Legend Cordless, Senior Cordless, Magic Clip, Magic Clip Cordless, and Balding. You receive a single guard, not a set. It is not for outline clippers or clippers with slide-on guards, such as the Kuno or ChromStyle.

Specifications

What else you need

• Wahl No. 1 Guard, shorter
• Wahl No. 3 Guard, longer
• Complete Wahl Premium Guard Set
• Wahl Magic Clip Cordless Clipper
• Wahl Clipper Blade Oil

ProBeauty Tip. If you are cutting with the clipper for the first time, start with No. 2 over the entire head. See how it looks and only then go down to No. 1 (3 mm) on the sides.

Wahl Guard No. 8 Black 25 mm is the standard Wahl 25 mm guard, sold separately. Wahl says that No. 8 leaves approximately 25 mm of hair: you shorten long hair without losing much length. You get it to replace a lost or broken one, or to have a second one on hand.

What it does for you

• Cuts evenly at 25 mm over the entire area you pass the clipper over.
• You use it to shorten long hair without losing much length.
• You complete the set without having to buy all 8 guards again.
• Works on several Wahl clippers: the brand lists it as compatible with 8 models, from Super Taper to Balding.

How to use it at home

1. Turn off the clipper and brush the hair off the blade.
2. Snap the guard onto the blade and press until it clicks. Check that it is secure before turning it on.
3. Cut against the direction of hair growth, using even strokes.
4. Pass over the same area several times to catch the lying hairs.
5. After cutting, clean it with a small brush. From time to time, wash it with warm water and mild soap and let it dry completely.

For what type of clipper

Wahl lists it as compatible with Super Taper, Super Taper Cordless, Legend, Legend Cordless, Senior Cordless, Magic Clip, Magic Clip Cordless, and Balding. You receive a single guard, not a set. It is not for outline clippers or for clippers with slide-on guards, such as Kuno or ChromStyle.

Specifications

What else you need

• Wahl Guard No. 7, shorter
• Complete Wahl Premium Guard Set
• Wahl Magic Clip Cordless Clipper
• Wahl Clipper Blade Oil

ProBeauty Tip. No. 8 is useful for taking off only the ends. Cut a little with it first, check the length in the mirror, then decide whether to go down to No. 7 (22 mm).

Wahl No. 7 Black 22 mm Guard is the standard Wahl 22 mm guard, sold separately. Wahl says that No. 7 leaves approximately 22 mm of hair, a length commonly used to style and taper longer hair. Get it to replace a lost or broken one, or to have a spare on hand.

What it does for you

• Cuts uniformly to 22 mm over the entire area you pass over with the clipper.
• Use it to style and taper longer hair.
• Complete your set without having to buy all 8 guards again.
• Works with several Wahl clippers: the brand lists it as compatible with 8 models, from the Super Taper to the Balding.

How to use it at home

1. Turn off the clipper and brush the hair off the blade.
2. Snap the guard onto the blade and press until it clicks into place. Check that it is securely attached before turning it on.
3. Cut against the direction of hair growth, using even strokes.
4. Pass over the same area several times to catch lying hairs.
5. After cutting, clean it with a small brush. Occasionally, wash it with warm water and mild soap and let it dry completely.

For what type of clipper

Wahl lists it as compatible with the Super Taper, Super Taper Cordless, Legend, Legend Cordless, Senior Cordless, Magic Clip, Magic Clip Cordless, and Balding. You receive a single guard, not a set. It is not for outline clippers or clippers with slide-on guards, such as the Kuno or ChromStyle.

Specifications

What else you need

• Wahl No. 6 guard, shorter
• Wahl No. 8 guard, longer
• Complete Wahl Premium guard set
• Wahl Magic Clip Cordless clipper
• Wahl clipper blade oil

ProBeauty tip. On longer hair, first comb the hair against the direction of growth. The clipper with No. 7 catches it evenly and does not leave patches.

Wahl No. 6 Black 19 mm Guard is Wahl's standard 19 mm guard, sold separately. Wahl says that No. 6 leaves approximately 19 mm of hair, for longer, classic haircuts. Get it to replace a lost or broken one, or to have a spare on hand.

What it does for you

• Cuts uniformly at 19 mm over the entire area you pass over with the clipper.
• Use it for longer, classic haircuts.
• Complete your set without having to buy all 8 guards again.
• Works with several Wahl clippers: the brand lists it as compatible with 8 models, from the Super Taper to the Balding.

How to use it at home

1. Turn off the clipper and brush the hair off the blade.
2. Place the guard on the blade and press until it clicks into place. Check that it is secure before turning it on.
3. Cut against the direction of hair growth, using even strokes.
4. Pass over the same area several times to catch the lying hairs.
5. After cutting, clean it with a small brush. Occasionally, wash it with warm water and mild soap and let it dry completely.

For which type of clipper

Wahl lists it as compatible with the Super Taper, Super Taper Cordless, Legend, Legend Cordless, Senior Cordless, Magic Clip, Magic Clip Cordless, and Balding. You receive a single guard, not a set. It is not for outline clippers or clippers with slide-on guards, such as the Kuno or ChromStyle.

Specifications

What else you need

• Wahl No. 5 guard, shorter
• Wahl No. 7 guard, longer
• Complete Wahl Premium guard set
• Wahl Magic Clip Cordless clipper
• Wahl clipper blade oil

ProBeauty tip. On thicker hair, pass the clipper over it several times from different directions. No. 6 leaves a lot of length, and lying hairs are easily missed on the first pass.

Wahl Guard No. 4 Black 13 mm is the standard Wahl 13 mm guard, sold separately. Wahl says that No. 4 leaves approximately 13 mm of hair, a length commonly used for crew cuts and brush cuts. Get it to replace a lost or broken one, or to have a spare on hand.

What it does for you

• Cuts uniformly to 13 mm over the entire area you pass the clipper over.
• Use it for crew cuts and brush cuts.
• Complete your set without having to buy all 8 guards again.
• Works with several Wahl clippers: the brand lists it as compatible with 8 models, from the Super Taper to the Balding.

How to use it at home

1. Turn off the clipper and brush the hair off the blade.
2. Snap the guard onto the blade and press until it clicks into place. Check that it is securely attached before you start.
3. Cut against the direction of hair growth, using even strokes.
4. Pass over the same area several times to catch the lying hairs.
5. After cutting, clean it with a small brush. From time to time, wash it with warm water and mild soap and let it dry completely.

For what type of clipper

Wahl lists it as compatible with the Super Taper, Super Taper Cordless, Legend, Legend Cordless, Senior Cordless, Magic Clip, Magic Clip Cordless, and Balding. You receive a single guard, not a set. It is not for outline clippers or clippers with slide-on guards, such as the Kuno or ChromStyle.

Specifications

What else you need

• Wahl Guard No. 3, shorter
• Wahl Guard No. 5, longer
• Complete Wahl Premium Guard Set
• Wahl Magic Clip Cordless Clipper
• Wahl Clipper Blade Oil

ProBeauty Tip. For a crew cut, leave No. 4 on top and go down to No. 3 (10 mm) on the sides. Blend the areas by passing No. 4 only over the transition line.