Black Friday

Kenzo World Eau de Parfum is an eau de parfum for women, the first fragrance created by the artistic directors of the Kenzo fashion house. Kenzo describes it as an unexpected and stunning floral bouquet. The bottle is shaped like the Kenzo eye, with black rubber, rose gold, and opaline glass, and contains 75 ml.

What it smells like

Kenzo describes three ingredients, without a classic pyramid:

• Main notes: peony, Egyptian jasmine, and Ambroxan.

The lightness of peony is embraced by the deeper notes of Egyptian jasmine. Ambroxan, which Kenzo describes as sparkling crystals, provides the finishing touch. The composition is signed by perfumer Francis Kurkdjian.

How to apply it

1. Spray on clean, moisturized skin before getting dressed.
2. Choose two or three pulse points: the neck, décolletage, and wrists.
3. Hold the bottle away from the skin to create a fine mist.
4. Let the fragrance dry without rubbing.
5. As an eau de parfum, start with a single spray on each area.

Specifications

What else you might need

• Flower by Kenzo, 100 ml eau de toilette
• Dior J'adore, floral eau de toilette
• Givenchy Amarige, 50 ml eau de toilette
• Guerlain La Petite Robe Noire, eau de toilette

ProBeauty tip. If you love flowers but don't want a classic fragrance, Kenzo World is a bold choice. Try it on your skin and come back to it after it has settled: peony is the first thing you'll notice, while Ambroxan provides the finishing touch.

Hermès Twilly d'Hermès is the eau de parfum Hermès calls the fragrance for Hermès girls: bold ginger, entwined with sensual tuberose. This page features a gift set built around the 50 ml eau de parfum bottle.

How it smells

• Key notes: ginger, tuberose and sandalwood.
• Ginger: biting, bringing the fragrance's cheekiness.
• Tuberose: unsettling, giving the floral allure.
• Sandalwood: the warm and sensual side, which reveals itself on the skin.

Hermès describes Twilly as a floral, spicy and oriental eau de parfum. Christine Nagel, the perfumer who composed it, says she created it thinking of young, free, bold and playful women. On the bottle, a silk ribbon tied by hand completes the picture.

How to apply it

1. Eau de parfum: spray it on clean and moisturized skin, on the wrists, the neck and behind the ears.
2. Hold the bottle at a short distance, so the fragrance settles evenly.
3. Do not rub the skin after spraying: let the ginger, tuberose and sandalwood settle together.
4. Start with one spray and add gradually, as it is an eau de parfum.
5. Use the other pieces of the set according to the instructions on their packaging.

Specifications

What else you need

• Paco Rabanne Ultraviolet, eau de parfum
• Lancôme Miracle, eau de parfum
• Calvin Klein Euphoria, eau de parfum
• Sisley Soir d'Orient, eau de parfum

ProBeauty tip. Hermès does not break down the notes into stages, so Twilly is judged as a whole. Wear it one day on one wrist and watch how the ginger, tuberose and sandalwood come together on your skin.

Davidoff Run Wild for Her is an eau de parfum for women, inspired by precious nature. Davidoff describes it as a floral sensuality and says the name is a call to nature that takes your breath away. The mint-green bottle contains 100 ml.

What it smells like

The perfume has one star note at each level:

• Top notes: pomegranate, sweet and juicy, an explosion of aromas.
• Heart notes: jasmine, which combines sensuality with refinement.
• Base notes: pistachio, creamy and delicious, which the brand calls gourmand.

Davidoff says that jasmine reflects the naturalness of the perfume, while pistachio evokes freedom and sensuality. The result is a floral with a creamy, slightly gourmand finish.

How to apply it

1. Spray it after a shower, on skin moisturized with an unscented cream.
2. Spray on the neck and wrists.
3. Hold the bottle a short distance from the skin.
4. Do not rub, let the perfume settle.
5. Being an eau de parfum, a small spray is enough to start with.

Specifications

What else you need

• Davidoff Cool Water Woman, eau de toilette 100 ml
• Davidoff Cool Water Woman, eau de toilette 50 ml
• Davidoff Cool Water Woman Sea Rose, eau de toilette
• Hugo Boss BOSS Femme, eau de parfum for women

ProBeauty's tip. If you like floral perfumes, but also want a creamy note, test it on your wrist and come back to it after a while. The pistachio in the base is barely noticeable after the pomegranate fades.

Calvin Klein CK IN2U Her is an eau de toilette for women, the feminine version of the CK IN2U duo. Calvin Klein described the line in three words: spontaneous, sexy, connected. The bottle here is the large one, 150 ml.

What it smells like

Calvin Klein no longer lists the notes of this version on its websites, so we won't give you an olfactory pyramid that we cannot verify. What the brand says about the line: it is inspired by an uninhibited generation, excited by all its possibilities. CK IN2U was the first Calvin Klein fragrance with separate versions for men and women, different, but designed to complement each other.

How to apply it

1. Apply it to clean skin, after a shower, when it is still slightly warm.
2. Spray on the neck, wrists, and behind the ears.
3. Hold the bottle away from the skin, not touching it.
4. Do not rub your wrists together after spraying.
5. Being an eau de toilette, you can refresh it throughout the day with a spritz.

Specifications

What else you might need

• Calvin Klein CK IN2U Her, eau de toilette 100 ml
• Calvin Klein Euphoria, eau de parfum
• Calvin Klein Eternity Moment, eau de parfum
• Calvin Klein CK One, unisex eau de toilette

ProBeauty tip. If you have never worn CK IN2U Her, choose the 100 ml bottle first or test it in a store. The 150 ml bottle is worth it when you are sure it is your fragrance.

Calvin Klein CK Be is a unisex eau de toilette that Calvin Klein presents as a fragrance to be shared between women and men. The brand describes it as a clean, fresh, and invigorating musk that is never overpowering. It comes in a 100 ml or 200 ml black bottle.

What it smells like

The fragrance is built in layers. It opens with aromatic notes and settles into a warm base:

• Top notes: bergamot, juniper berries, mandarin, mint, and lavender.
• Heart notes: light spices, magnolia, and white peach.
• Base notes: opoponax and tonka beans.

Calvin Klein associates the fragrance with self-expression, individuality, and warmth. In practice, it is a subtle musk, ideal if you do not like fragrances that fill the room.

How to apply it

1. Apply to clean, dry skin after showering.
2. Spray on the neck and wrists, the warmest areas of the body.
3. Hold the bottle slightly further away from the skin to allow the fragrance to mist evenly.
4. Do not rub. Rubbing causes the opening notes of mint and lavender to fade more quickly.
5. As it is a subtle fragrance, two or three sprays are usually enough.

Specifications

You may also need

• Calvin Klein CK One, unisex eau de toilette
• Calvin Klein Obsession for Men, eau de toilette
• Calvin Klein Euphoria, eau de parfum for women
• JOOP! Homme, eau de toilette for men

ProBeauty tip. CK Be is for anyone who wants a clean, fresh musk that Calvin Klein describes as never overpowering. If you prefer something more citrusy, compare it with CK One.

Burberry Touch for Women is an eau de parfum for women, which Burberry describes as a fruity and vibrant fragrance. It combines fruit, white flowers and a woody warmth, with vanilla. The bottle contains 100 ml.

What it smells like

Burberry describes the fragrance in three groups of notes, rather than as a classic pyramid:

• The fruity notes: California orange, blackcurrant, wild blackberry and a touch of rose oil.
• The floral notes: jasmine, Madonna lily and tuberose, with a hint of peach and raspberry. Burberry calls them fresh top notes.
• The warm notes: cedarwood, oakmoss and vanilla.

The brand says that the wood and vanilla complement the fruit and bring a soothing warmth.

How to apply it

1. Apply the fragrance to clean and well-moisturized skin.
2. Spray on the wrists, décolletage and neck.
3. Keep a small distance between the bottle and the skin.
4. Let the fragrance dry without rubbing your wrists.
5. Start with two sprays. The white flowers are well-felt even in a small dose.

Specifications

What else you might need

• Burberry Touch for Men, eau de toilette
• Burberry for Women, eau de parfum
• Burberry Weekend, eau de parfum
• Burberry Brit Sheer, eau de toilette

ProBeauty's tip. Touch has a version for women and one for men. If you want a gift for a couple, Touch for Women and Touch for Men go together: fruity and floral for her, clean and woody for him.

Srong hold and spectacular volume, without weighing hair down! Yellow Style Strong Spray offers long-lasting hold, keeping your hairstyle impeccable all day. Its innovative formula, enriched with green coffee oil and Aloe Vera, energizes and hydrates hair, giving it shine and protection.

Key Benefits:

Strong hold and flexibility – Maintains hair's shape without stiffness.
Volumizing effect – Applied at the roots, it provides extra volume and texture.
Doesn't weigh hair down, no residue – Natural look and easy to refresh.
Protection and hydration – With green coffee oil and Aloe Vera for healthy hair.
Suitable for all hair types and styles

How to use:

Spray on dry or slightly damp hair from a distance of 25-30 cm.
For maximum volume, apply directly to the roots.
Style as desired and enjoy an impeccable look!

Strong hold, spectacular volume, and protection – all in one spray!

Dsquared2 He Wood Rocky Mountain Wood is an eau de toilette for men from the He Wood line by Dsquared2. The box says "Eau de Toilette pour Homme", and the bottle is encased in a wooden frame. You can find it here in a 50 ml bottle.

What it smells like

We tell you honestly what we know. The official Dsquared2 page for this fragrance lists the format and country of manufacture, but not the notes. The box doesn't list them either. We prefer not to promise you notes that Dsquared2 has not published.

• What we know for sure: it is an eau de toilette, a lighter formula than an eau de parfum.
• Line: the He Wood name on the box links it to the Dsquared2 men's line of the same name.
• Origin: Dsquared2 presents it as a product made in Italy.
• How to choose it: a test on your skin will tell you more than any description.

How to apply it

1. Apply it to clean, lightly moisturized skin after a shower.
2. Spray it on your chest and the base of your neck, the warmest areas.
3. Do not press the sprayer against your skin. Hold the bottle a little further away so the fragrance can spread.
4. Let it dry on its own without rubbing.
5. Since it is an eau de toilette, you can reapply with a spray in the afternoon.

Specifications

What else you might need

• Issey Miyake L'Eau d'Issey Pour Homme Vétiver
• Ralph Lauren Polo Black, eau de toilette
• Diesel Only The Brave, eau de toilette
• Tom Ford Noir Extreme, eau de parfum

ProBeauty tip. Since the notes are not published, only choose it after trying it on your skin. Spray it in the morning on the inside of your wrist and return to it a few times during the same day.

Hugo Boss BOSS Ma Vie pour Femme is an eau de parfum for women, built around the cactus flower. Hugo Boss says they wanted to reinvent green floral notes with a delicate pink hue. The bottle contains 75 ml.

What it smells like

• Main notes: cactus flower, pink floral notes, and cedarwood.

The brand does not divide them into layers. The green freshness of the cactus flower combines with the pink floral notes, making the composition luminous. Cedarwood grounds it gently without taking away its clarity.

The inspiration, says Hugo Boss, is the independent woman who stops to enjoy the simple moments.

How to apply it

1. Apply it to clean skin after applying body cream.
2. Spray on the neck and wrists from a short distance.
3. For a finer trail, you can also spray on the nape of the neck.
4. Do not rub the skin. Let the floral notes settle.
5. Being an eau de parfum, start with a small dose.

Specifications

What else you might need

• BOSS Ma Vie pour Femme L'Eau, 50 ml eau de toilette
• BOSS Femme, eau de parfum for women
• BOSS Orange Woman, 30 ml eau de toilette
• Davidoff Cool Water Woman Sea Rose, eau de toilette

ProBeauty tip. If you like fresh flowers but don't want a sweet perfume, Ma Vie is a variant worth trying. Test it on your skin and let it settle before deciding.

Paco Rabanne Invictus is the men's eau de toilette that launched the Invictus line. Rabanne describes it as a fresh woody fragrance built around grapefruit, marine accord, and guaiac wood. It comes in 50 ml or 100 ml bottles shaped like silver trophies.

What it smells like

A fragrance evolves on the skin in three stages. The first passes quickly, while the last lingers closest to the skin:

• Top notes: grapefruit, bright and tart.
• Heart notes: a salty, mineral marine accord, like a sea breeze.
• Base notes: guaiac wood, patchouli, and ambergris.

Rabanne presents it as a clash between the freshness of the sea and the warmth of wood. Within the Invictus family, it is the freshest and most versatile option.

When to wear it

The brand recommends it as a daytime fragrance for warm weather, spring and summer. You can wear it for sports, at the office, or every day.

How to apply it

1. Apply it after a shower, to clean, moisturized skin. Moisturized skin holds a fresh fragrance longer.
2. Spray it on your wrists, neck, chest, and behind your ears.
3. Hold the bottle slightly further from your skin so the fragrance falls like a fine mist.
4. Let it settle on your skin on its own. Do not rub.
5. Rabanne says that spraying it on your shirt collar extends its scent. Try it on a hidden area of the fabric first.

Specifications

What else you might need

• Invictus Set with Travel Spray
• Paco Rabanne Pure XS, men's eau de toilette
• Paco Rabanne Paco, 100 ml eau de toilette

ProBeauty Tip. If you wear it in summer, spray it in the morning on skin that is still cool after a shower. The grapefruit is clearer, and the guaiac wood emerges throughout the day without becoming heavy.

Calvin Klein CK IN2U Her is an eau de toilette for women, the feminine half of the CK IN2U duo. Calvin Klein has described the line as spontaneous, sexy, and connected. The bottle contains 100 ml, and the gold box bears the inscription "her".

What it smells like

We can no longer find the notes of the version for women on Calvin Klein's websites, and we do not reproduce lists of notes from unofficial sources. The brand says that the line is inspired by a free, uninhibited generation, drawn to all possibilities. It was the first Calvin Klein fragrance made in two distinct versions, for her and for him, which complement each other.

How to apply it

1. Spray on clean, moisturized skin before getting dressed.
2. Aim for pulse points: the wrists and the base of the neck.
3. Hold the bottle close to the skin.
4. Let the fragrance dry on its own without rubbing.
5. Start with two sprays and add more only if you feel it is too faint.

Specifications

What else you might need

• Calvin Klein CK IN2U Her, 150 ml eau de toilette
• Calvin Klein Eternity Moment, eau de parfum
• Calvin Klein Euphoria, eau de parfum
• Calvin Klein CK Be, unisex eau de toilette

ProBeauty tip. Since we cannot provide the official notes, the safest thing to do is test it on your skin first. If you already know it and like it, the 100 ml bottle is the balanced choice.

Ralph Lauren Polo Black is a fragrance that emphasizes men's masculinity and strength. Created for charismatic gentlemen with dynamic activities, this fragrance is ideal for those who know how to care for themselves and who value quality and elegance.

Initially, the first notes to emerge are fresh notes of mandarin, mango, and sage, bringing a refreshing and energizing sensation. Then, in the heart of the fragrance, exotic patchouli stands out, adding a mysterious and intense aura. Finally, sandalwood and tonka complete the composition with woody and warm notes, leaving a lasting and elegant impression.

Composition:

• Top notes: mandarin, mango, sage 
• Heart notes: patchouli 
• Base notes: sandalwood, tonka 

Fragrance families: aromatic, woody 

This fragrance is perfect for men who want to express their confidence and elegance through every gesture.

BaByliss PRO FX821E FX500ME is a replacement blade sold for the BaByliss PRO FX821E mini clipper. The FX821E is a mini hair clipper and trimmer with two detachable blades, one fine and one coarser. You use it for sideburns, neck, beard, and mustache.

What it does for you

• It brings back clean finishes on your sideburns, neck, beard, and mustache.
• It keeps your clipper working: you only replace the worn blade, not the entire clipper.
• It can be replaced without service, because the blades of the FX821E clipper are detachable.
• It cuts again without pulling, when the old blade has become dull.

How to use it at home

1. Turn off the clipper and unplug it.
2. Remove the old blade, as shown in the clipper manual.
3. Place the new blade in the same position and press until it is firmly attached.
4. Put a drop of oil on the teeth and turn on the clipper for a few seconds.
5. Test the cut on a small area before finishing.

For what type of clipper

It is sold for the BaByliss PRO FX821E mini hair clipper and trimmer, an older model. The brand does not publish a sheet for the FX500ME code or any other compatible models. If you have another clipper, write us its code before ordering, so you do not receive a blade that does not fit.

What else you need

• BaByliss PRO 4-in-1 spray for blade maintenance
• Wahl oil for lubricating the blades, 100 ml
• Wahl Blade Ice spray for cooling and cleaning the blades

ProBeauty's tip. When ordering, take the old blade with you or a photo of it next to the clipper. This way you can immediately see if you need the fine blade or the coarser one of the FX821E clipper.

BaByliss PRO 3 mm Guard for FX660SE is the 3 mm replacement guard for the FX660SE hair clipper. It is the shortest of the 5 guards the brand offers for this clipper: 3, 6, 9, 12, and 16 mm. Get it if you have lost or broken the original one.

What it does for you

• Cut evenly at 3 mm again without buying another complete set.
• Complete the original set of the FX660SE clipper with the missing guard.
• Create clean short transitions on the sides and at the nape of the neck.
• Easily switch to the blade adjustment for lengths under 3 mm, which the FX660SE has from the factory.

How to use it at home

1. Turn off the clipper and clear the hair from the blade.
2. Place the guard over the blade and press until it locks into place.
3. Check that it is securely attached before turning on the clipper.
4. Cut with even strokes, without pressing the guard into the scalp.
5. After cutting, remove it, brush off the hair, and store it with the other guards.

For which type of device

It is the 3 mm guard for the BaByliss PRO FX660SE hair clipper. It is not a set: you receive a single guard. For the FX8700, FX825, or FX895E clippers, choose the FXPCGE set, made for them.

Specifications

What else you need

• BaByliss PRO FX4in1 Spray for blade maintenance
• Wahl Oil for hair clipper blades
• Straight cutting comb
• Wahl cutting cape

ProBeauty Tip. For a smooth transition under 3 mm, remove the guard and use the FX660SE blade adjustment, which ranges from 3.2 to 0.8 mm. This way, you blend the 3 mm guard with the short-cut area.

BaByliss PRO 35087000 is the 45 mm replacement blade for the ChromFX FX8700E hair clipper. The brand lists it as the replacement blade on the clipper's page. It is a Japanese steel blade with a very sharp V-shaped cutting angle, designed for fading.

What it does for you

• Restores the cut to like-new condition, as it is the brand's recommended replacement blade for the FX8700E.
• Cuts cleanly and precisely, thanks to the Japanese steel with a V-shaped cutting angle.
• Gets very close to the skin: it is a flat blade, ideal for blending harsh lines.
• Covers a wide area, with a width of 45 mm.

How to use it at home

1. Turn off the clipper and set the fine adjustment lever on the left to the top position.
2. Loosen the screws with a screwdriver and set them aside.
3. Lift the old moving blade slightly and replace it with the new one on the oscillator.
4. Place the new fixed blade, with the moving blade centered and parallel to it, to avoid injury.
5. Tighten the screws back into place.
6. Clean and lubricate the blade regularly with BaByliss PRO 4 in 1 spray or oil.

For which type of device

It is the replacement blade for the BaByliss PRO ChromFX FX8700E hair clipper, as stated on the clipper's page. The brand does not list this code for other FX8700 variants. If you have the FX8700 Gold, Boost+, or LO-PROFX FX825, choose a blade with compatibility published for the entire series.

Specifications

What else you need

• BaByliss PRO ChromFX FX8700E hair clipper
• BaByliss PRO 4 in 1 spray for blade maintenance
• Wahl oil for lubricating blades, 100 ml
• Wahl Blade Ice spray for cooling and cleaning blades

ProBeauty tip. Check the label under the clipper to make sure it says FX8700E, not just FX8700. For the other variants, blades compatible with the entire series are the safe choice.

Wahl Beretto Motor 95368-1016 is the complete replacement motor that the official Wahl parts list specifies for the Beretto ProLithium (4212-0470) clipper. Replace it when the old motor no longer starts or has lost power. The clipper is repairable, not disposable.

What it does for you

• Your clipper is back in action: a new motor, while the housing, battery, and blade remain.
• Complete motor: the Wahl list refers to it as "Motor completo Beretto," meaning the entire motor assembly, not just one of its components.
• The exact model code: 95368-1016 is listed for the Beretto ProLithium, alongside its other parts.
• Simpler servicing: the technician receives the part directly from the Wahl list.

How to use it at home

1. Fully charge the clipper, clean and lubricate the blade: sometimes this solves a slow clipper.
2. If that doesn't help, check the label to make sure you have the Beretto 4212-0470.
3. Take the clipper and motor to an authorized Wahl service center for installation.
4. After repair, test the clipper for a few minutes with a lubricated blade before cutting hair.

For what type of device

For the Wahl Beretto ProLithium (4212-0470) cordless clipper, as specified in the Wahl parts list. We have no confirmation for the Beretto Stealth, as it has a different model code. It is not for the Beret, which has a different motor.

What else you need

• Wahl 97581-2016 Charger for Beret and Beretto
• Wahl Blade Oil
• Wahl Blade Ice Spray for Blades

ProBeauty Tip. Keep the old motor until the repair is finished. If the service center finds another cause, you can return the unopened new part.

Wahl Guard No. 8 Black 25 mm is the standard Wahl 25 mm guard, sold separately. Wahl says that No. 8 leaves approximately 25 mm of hair: you shorten long hair without losing much length. You get it to replace a lost or broken one, or to have a second one on hand.

What it does for you

• Cuts evenly at 25 mm over the entire area you pass the clipper over.
• You use it to shorten long hair without losing much length.
• You complete the set without having to buy all 8 guards again.
• Works on several Wahl clippers: the brand lists it as compatible with 8 models, from Super Taper to Balding.

How to use it at home

1. Turn off the clipper and brush the hair off the blade.
2. Snap the guard onto the blade and press until it clicks. Check that it is secure before turning it on.
3. Cut against the direction of hair growth, using even strokes.
4. Pass over the same area several times to catch the lying hairs.
5. After cutting, clean it with a small brush. From time to time, wash it with warm water and mild soap and let it dry completely.

For what type of clipper

Wahl lists it as compatible with Super Taper, Super Taper Cordless, Legend, Legend Cordless, Senior Cordless, Magic Clip, Magic Clip Cordless, and Balding. You receive a single guard, not a set. It is not for outline clippers or for clippers with slide-on guards, such as Kuno or ChromStyle.

Specifications

What else you need

• Wahl Guard No. 7, shorter
• Complete Wahl Premium Guard Set
• Wahl Magic Clip Cordless Clipper
• Wahl Clipper Blade Oil

ProBeauty Tip. No. 8 is useful for taking off only the ends. Cut a little with it first, check the length in the mirror, then decide whether to go down to No. 7 (22 mm).

Wahl No. 7 Black 22 mm Guard is the standard Wahl 22 mm guard, sold separately. Wahl says that No. 7 leaves approximately 22 mm of hair, a length commonly used to style and taper longer hair. Get it to replace a lost or broken one, or to have a spare on hand.

What it does for you

• Cuts uniformly to 22 mm over the entire area you pass over with the clipper.
• Use it to style and taper longer hair.
• Complete your set without having to buy all 8 guards again.
• Works with several Wahl clippers: the brand lists it as compatible with 8 models, from the Super Taper to the Balding.

How to use it at home

1. Turn off the clipper and brush the hair off the blade.
2. Snap the guard onto the blade and press until it clicks into place. Check that it is securely attached before turning it on.
3. Cut against the direction of hair growth, using even strokes.
4. Pass over the same area several times to catch lying hairs.
5. After cutting, clean it with a small brush. Occasionally, wash it with warm water and mild soap and let it dry completely.

For what type of clipper

Wahl lists it as compatible with the Super Taper, Super Taper Cordless, Legend, Legend Cordless, Senior Cordless, Magic Clip, Magic Clip Cordless, and Balding. You receive a single guard, not a set. It is not for outline clippers or clippers with slide-on guards, such as the Kuno or ChromStyle.

Specifications

What else you need

• Wahl No. 6 guard, shorter
• Wahl No. 8 guard, longer
• Complete Wahl Premium guard set
• Wahl Magic Clip Cordless clipper
• Wahl clipper blade oil

ProBeauty tip. On longer hair, first comb the hair against the direction of growth. The clipper with No. 7 catches it evenly and does not leave patches.

Wahl No. 6 Black 19 mm Guard is Wahl's standard 19 mm guard, sold separately. Wahl says that No. 6 leaves approximately 19 mm of hair, for longer, classic haircuts. Get it to replace a lost or broken one, or to have a spare on hand.

What it does for you

• Cuts uniformly at 19 mm over the entire area you pass over with the clipper.
• Use it for longer, classic haircuts.
• Complete your set without having to buy all 8 guards again.
• Works with several Wahl clippers: the brand lists it as compatible with 8 models, from the Super Taper to the Balding.

How to use it at home

1. Turn off the clipper and brush the hair off the blade.
2. Place the guard on the blade and press until it clicks into place. Check that it is secure before turning it on.
3. Cut against the direction of hair growth, using even strokes.
4. Pass over the same area several times to catch the lying hairs.
5. After cutting, clean it with a small brush. Occasionally, wash it with warm water and mild soap and let it dry completely.

For which type of clipper

Wahl lists it as compatible with the Super Taper, Super Taper Cordless, Legend, Legend Cordless, Senior Cordless, Magic Clip, Magic Clip Cordless, and Balding. You receive a single guard, not a set. It is not for outline clippers or clippers with slide-on guards, such as the Kuno or ChromStyle.

Specifications

What else you need

• Wahl No. 5 guard, shorter
• Wahl No. 7 guard, longer
• Complete Wahl Premium guard set
• Wahl Magic Clip Cordless clipper
• Wahl clipper blade oil

ProBeauty tip. On thicker hair, pass the clipper over it several times from different directions. No. 6 leaves a lot of length, and lying hairs are easily missed on the first pass.

Wahl Guard No. 4 Black 13 mm is the standard Wahl 13 mm guard, sold separately. Wahl says that No. 4 leaves approximately 13 mm of hair, a length commonly used for crew cuts and brush cuts. Get it to replace a lost or broken one, or to have a spare on hand.

What it does for you

• Cuts uniformly to 13 mm over the entire area you pass the clipper over.
• Use it for crew cuts and brush cuts.
• Complete your set without having to buy all 8 guards again.
• Works with several Wahl clippers: the brand lists it as compatible with 8 models, from the Super Taper to the Balding.

How to use it at home

1. Turn off the clipper and brush the hair off the blade.
2. Snap the guard onto the blade and press until it clicks into place. Check that it is securely attached before you start.
3. Cut against the direction of hair growth, using even strokes.
4. Pass over the same area several times to catch the lying hairs.
5. After cutting, clean it with a small brush. From time to time, wash it with warm water and mild soap and let it dry completely.

For what type of clipper

Wahl lists it as compatible with the Super Taper, Super Taper Cordless, Legend, Legend Cordless, Senior Cordless, Magic Clip, Magic Clip Cordless, and Balding. You receive a single guard, not a set. It is not for outline clippers or clippers with slide-on guards, such as the Kuno or ChromStyle.

Specifications

What else you need

• Wahl Guard No. 3, shorter
• Wahl Guard No. 5, longer
• Complete Wahl Premium Guard Set
• Wahl Magic Clip Cordless Clipper
• Wahl Clipper Blade Oil

ProBeauty Tip. For a crew cut, leave No. 4 on top and go down to No. 3 (10 mm) on the sides. Blend the areas by passing No. 4 only over the transition line.

Wahl No. 2 Black 6 mm Guard is the standard Wahl 6 mm guard, sold separately. Wahl says that No. 2 leaves approximately 6 mm of hair: a short haircut, but slightly longer. Get it to replace a lost or broken one, or to have a spare on hand.

What it does for you

• Cuts uniformly at 6 mm over the entire area you pass the clipper over.
• Use it for a short haircut, slightly longer than a buzz cut.
• Complete your set without having to buy all 8 guards again.
• Works with several Wahl clippers: the brand lists it as compatible with 8 models, from the Super Taper to the Balding.

How to use it at home

1. Turn off the clipper and brush the hair off the blade.
2. Place the guard on the blade and press until it clicks into place. Check that it is secure before turning it on.
3. Cut against the direction of hair growth, using even strokes.
4. Pass over the same area several times to catch the lying hairs.
5. After cutting, clean it with a small brush. From time to time, wash it with warm water and mild soap and let it dry completely.

For what type of clipper

Wahl lists it as compatible with the Super Taper, Super Taper Cordless, Legend, Legend Cordless, Senior Cordless, Magic Clip, Magic Clip Cordless, and Balding. You receive a single guard, not a set. It is not for outline clippers or clippers with slide-on guards, such as the Kuno or ChromStyle.

Specifications

What else you need

• Wahl No. 1 Guard, shorter
• Wahl No. 3 Guard, longer
• Complete Wahl Premium Guard Set
• Wahl Magic Clip Cordless Clipper
• Wahl Clipper Blade Oil

ProBeauty Tip. If you are cutting with the clipper for the first time, start with No. 2 over the entire head. See how it looks and only then go down to No. 1 (3 mm) on the sides.

Wahl Beret Motor 08723-1716 is the replacement motor that Wahl lists as the official part for the Beret trimmer. Replace it when the old motor has burned out, makes unusual noise, or no longer has power. The rest of the machine remains the same.

What it does for you

• Restore your trimmer without buying a new Beret.
• The exact part: Wahl lists 08723-1716 as the "Beret Motor" for both the silver and black versions.
• Same performance as before: the motor is made for the model, not an adapted part.
• Faster service: the technician receives the part directly from the Wahl list.

How to use it at home

1. Rule out simple causes: clean the blade, apply oil, and fully charge the machine.
2. If the motor still does not work properly, check the model on the label: Beret 08841-616 or 08841-1516.
3. Take the machine and motor to an authorized Wahl service center; Wahl has authorized repair centers in Europe.
4. After installation, oil the blade and test the machine for a few minutes before use.

For what type of device

For Wahl Beret trimmers: the silver model 08841-616 and the black Stealth Beret model 08841-1516, as listed in the Wahl parts list. It is not for the Beretto, Detailer, or Magic Clip, which have different motors in the same list. For an older Beret with a different code, ask us.

What else you need

• Wahl Beret Trimmer
• Wahl Beret Stealth Replacement Blade
• Wahl 97581-2016 Charger for Beret and Beretto
• Wahl Blade Oil
• Wahl Blade Ice Spray for Blades

ProBeauty Tip. Most motors wear out because the blade is unlubricated and clogged with hair. After repair, put a drop of oil on the blade before every trim and clean out the collected hair.

The Wahl Magic Clip and Super Taper Cordless printed circuit board 08591-2030 is the replacement electronic board listed on the official Wahl parts list for the Magic Clip Cordless 08148-016 and Super Taper Cordless. The circuit connects the battery, switch, and motor. When it fails, the clipper will no longer turn on or charge.

What it does for you

• Repair the clipper, don't throw it away: if the rest of the clipper is in good condition, a new circuit will get it working again.
• The same part number for two models: the Wahl parts list lists 08591-2030 for both the Magic Clip Cordless and Super Taper Cordless.
• Genuine Wahl part, with the part number from the brand's parts list.
• Simpler servicing: the technician receives the correct part directly, without searching.

How to use it at home

1. First, check the charger and contacts; a clipper that won't turn on doesn't always have a faulty circuit.
2. Check the clipper's label: the circuit is for the Magic Clip Cordless 08148-016 and Super Taper Cordless.
3. Take the clipper and part to an authorized Wahl service center; Wahl has authorized repair centers in Europe.
4. After installation, fully charge the clipper and oil the blade before the first use.

For which type of device

For Wahl Magic Clip Cordless 08148-016 and Super Taper Cordless clippers, as listed on the Wahl parts list. It is not confirmed for newer generations of the Magic Clip Cordless or for the Senior. It is a service part, not an accessory you swap between clippers.

What else you need

• Wahl Magic Clip Cordless Clipper
• Wahl Super Taper Cordless Clipper
• Wahl Magic Clip Cordless Replacement Blade
• Wahl Blade Oil
• Wahl Blade Ice Spray

ProBeauty Tip. Before spending money on a circuit board, ask the service center for a diagnosis. In cordless clippers, a worn battery shows similar symptoms, and the repair may be different.

The Moser Edition Pro Motor for dryer 0210-7251 is the replacement motor for the Moser Edition Pro professional hair dryer. According to the Moser data sheet, the Edition Pro has a safety thermostat and a removable filter that you can clean. Replace it when the dryer no longer blows, blows weakly, or the motor makes noise.

What it does for you

• The dryer blows powerfully again: the motor is what provides the airflow for fast drying.
• You don't buy another dryer: the housing, heating element, and nozzles remain, if they are in good condition.
• The dryer remains the one you know: the speed and heat settings and the cool air button remain the same.
• Service repair: installation is done with original parts, as required by Moser.

How to use it at home

1. Unplug the dryer and let it cool down.
2. Remove the filter and clean it; a clogged filter suffocates the motor.
3. If the dryer still doesn't work well, take it with the new motor to an authorized service center.
4. After installation, turn it on at the low setting first and listen to see if it runs evenly.

For what type of device

For the Moser Edition Pro hair dryer, type 4330/4331. Moser does not publish the parts list for this dryer, so check the type on the device label before ordering. It is not a part for clippers or other dryers.

What else you need

• Heat protection spray
• Heat protection spray for smoothing
• Round brush for drying

ProBeauty tip. Clean the dryer filter once a week if you use it daily. The air passes freely, the motor does not overheat, and the thermostat does not stop the dryer in the middle of styling.

The Moser Li+Pro Battery with Circuit 1884-7100 is the battery and electronic board assembly for the Moser Li+Pro clipper. The Li+Pro can be used corded or cordless, according to Moser. Replace it when the clipper holds its charge for less and less time or no longer charges.

What it does for you

• Cut cordlessly again: without a good battery, the Li+Pro remains plugged in.
• Order by code: compare 1884-7100 with the code on the old part before installation.
• One-piece battery and circuit: the service center replaces the assembly, not individual parts.
• You can also work corded: until installation, the clipper can be used plugged in.

How to use it at home

1. First, check the stand, power supply, and charging contacts.
2. Take the clipper and part to a service center; Moser requires that batteries be replaced only there.
3. After installation, fully charge the clipper on the stand before the first cut.
4. Clean and lubricate the blade after each use so that the battery lasts as long as possible.

For what type of device

For the Moser Li+Pro clipper, type 1884, the one with the Magic Blade II blade. Code 1884-7100 does not appear in the parts list published by Moser, and for the Li+Pro², the list shows a different battery. Check the type on the clipper's label and the code of the old part before ordering.

What else you need

• Moser Li+Pro 1884-7020 Motor
• Blade oil
• Blade cooling and cleaning spray
• Hairdressing cape

ProBeauty Tip. Moser manuals state that you should not leave the clipper exposed to frost or high heat for long periods. Do not leave it in the car during summer or near a heater.

The Moser Li+Pro Motor 1884-7020 is the replacement motor that Moser's official parts list calls the "1884 Li+Pro motor" and lists for the Li+Pro². According to Moser's data sheet, the Li+Pro has a chip-controlled DC motor with noise reduction, operating at approximately 5200 rpm. Replace it when the clipper no longer starts or loses power while cutting.

What it does for you

• Consistent power again: Moser says that the chip-controlled motor maintains consistent cutting power.
• Keep your clipper: the Magic Blade II blade, battery, and stand can be reused if they are in good condition.
• The correct part number: 1884-7020 is the motor listed in Moser's parts list.
• Work quietly: a new motor no longer makes the noise of a worn-out motor.

How to use it at home

1. Fully charge the clipper and clean the blade; a stuck blade can make a motor seem defective.
2. If it still doesn't work, take the clipper and motor to an authorized service center.
3. After installation, oil the blade and run the clipper for a few minutes.
4. When cutting long hair, take short breaks to let the blade cool down.

For which type of clipper

For Moser Li+Pro (type 1884) and Li+Pro² (type 1888) clippers, according to Moser's designation and parts list. This is not the motor for the Li+Pro Mini, which is a different clipper with a narrower blade. If you don't know the type, check the label on the clipper.

Specifications

What else you need

• Moser Li+Pro 1884-7100 battery with circuit
• Blade oil
• Blade cooling and cleaning spray
• Clipping cape

ProBeauty tip. The Li+Pro has an indicator that shows you when the blade needs to be oiled. Don't ignore it: a dry blade puts extra strain on the motor and wears it out faster.

The Moser ChromStyle Pro Battery 1871-7960 is the replacement battery for the Moser ChromStyle Pro hair clipper. Moser's official parts list specifies it for the black and white ChromStyle Pro and the 1871-0078 set. The manual states that the clipper uses a LiFePO4 lithium-ion battery. Replace it when the clipper's cordless runtime becomes increasingly short.

What it does for you

• Restore full runtime: Moser states that the ChromStyle Pro provides up to 90 minutes of cordless runtime.
• Fast charging: according to the manual, the clipper charges in approximately 60 minutes.
• No memory effect: Moser describes the clipper's lithium batteries as durable and free from memory effect.
• Battery only: Moser's parts list specifies the circuit separately, so you only pay for the worn part.

How to use it at home

1. Clean and lubricate the blade; the manual states that a very dirty and unlubricated blade can cut the runtime in half.
2. If the clipper's runtime is still too short, take it to an authorized service center; Moser requires that batteries be replaced only there.
3. After installation, place the clipper on the stand; overcharging is prevented by the intelligent charging management system.
4. Use it corded via the power supply while the clipper is charging.

For which type of device

For the Moser ChromStyle Pro hair clipper, model 1871: 1871-0071, 1871-0072, and the 1871-0078 set, as specified in Moser's parts list. We cannot confirm compatibility with other ChromStyle clippers, including those sold under the Wahl brand. Send us the code on the label and we will check.

Specifications

What else you need

• Moser 1854-7833 stand and guide
• Blade oil
• Blade cooling and cleaning spray
• Hair clipper cape

ProBeauty tip. The Moser manual states that runtime gradually decreases with daily use, even with batteries designed for professional use. If the clipper has been used intensively for several years, it is normal for it to require a new battery.

The Moser Genio Plus Support and Guide 1854-7833 is a replacement part for the Moser Genio Plus hair clipper. The code 1854 is the Genio Plus clipper type. Moser does not publish a data sheet for this part, so order it when the service center or the code on the old part tells you exactly 1854-7833.

What it does for you

• The clipper is back to work: you only replace the broken or worn part, by its code.
• Order by code, not by picture: compare 1854-7833 directly with the code on the old part.
• Part for the clipper type: the prefix 1854 is the Genio Plus type.
• Minor repair: you don't replace the whole clipper for a small part.

How to use it at home

1. Remove the battery and then the blade, sliding it off the housing.
2. Compare the code and shape of the old part with the new part before installation.
3. If you have never disassembled a clipper, leave the installation to an authorized service center.
4. After installation, snap the blade back into place until it clicks, lubricate it, and turn on the clipper as a test.

For what type of device

For the Moser Genio Plus hair clipper, type 1854, with the detachable Magic Blade blade. For the ChromStyle Pro, which uses the same blade, Moser does not confirm the part. Check the type on the clipper label and the code of the old part before ordering.

What else you need

• Moser Genio Plus Motor 1854-7060
• Moser Genio Plus Battery 1854-7988
• Moser ChromStyle Pro Battery 1871-7960
• Blade oil
• Cooling and cleaning spray for blades

ProBeauty tip. When removing the Genio Plus blade, slide it off the housing as shown in the manual and do not force it sideways. The parts around it will last longer.

The Moser Genio Plus Motor 1854-7060 is the replacement motor for the Moser Genio Plus hair clipper, the one with the removable battery. The official Moser parts list refers to it in the Genio Plus as the "2.6 V 1854 motor". Replace it when the clipper no longer starts with a charged battery or loses power while cutting.

What it does for you

• Cut with power again: The Genio Plus has, according to Moser, a noise-dampened DC motor with approximately 5000 rpm.
• Keep the two-battery system: the clipper comes with two batteries and continues to work with them.
• Part with the correct code: 1854-7060 is the motor in the Genio Plus parts list.
• Repair, not a new device: the Magic Blade blade, batteries, and charging station remain.

How to use it at home

1. First, try the other charged battery; sometimes the battery is worn out, not the motor.
2. Clean and lubricate the blade; a stuck blade strains the motor.
3. If the clipper still does not work, take it with the new motor to an authorized service center.
4. After installation, oil the blade and run the clipper for a few minutes as a test.

For what type of device

For the Moser Genio Plus hair clipper, type 1854, with a removable battery and 46 mm Magic Blade blade. It is not the motor for the Arco pet clipper, which has a different code in the Moser parts list, nor for the standard Genio, type 1565.

Specifications

What else you need

• Moser Genio Plus Battery 1854-7988
• Moser 1854-7833 Holder and Guide
• Blade oil
• Blade cooling and cleaning spray

ProBeauty Tip. Use the batteries one after the other, not just one. The Genio Plus manual is designed around this idea: one works, the other charges. The motor always receives a good voltage.

The Moser ChroMini Battery 1590-7290 is the replacement battery for the Moser ChroMini cordless trimmer. The ChroMini runs only on battery power, so a worn-out battery will cause it to stop working. Replace it when the trimmer holds its charge for less and less time or no longer charges.

What it does for you

• The trimmer works again: The ChroMini runs only on battery power, without a cable.
• Unrushed contouring: no more working with your eyes glued to the little light at the bottom of your beard.
• You keep the small and lightweight trimmer: Moser describes it as very light and quiet.
• Simple repair in the service center: only the battery is replaced, the rest of the trimmer remains.

How to use it at home

1. First, check the stand and charging contacts; clean them of hair with a dry brush.
2. Take the trimmer and battery to a service center; Moser requires that batteries only be replaced there.
3. After installation, fully charge the trimmer on its stand before the first contouring.
4. Clean and lubricate the blade after each use, so the battery lasts as long as possible.

For what type of device

For the Moser ChroMini cordless trimmer (1591-0052 and 1591-0057). The ChroMini Pro has a different battery in Moser's list and a different charging stand. Code 1590-7290 does not appear in the list published by Moser, so check the model on the trimmer's label before ordering.

What else you need

• Moser ChroMini Designer Blade 1590-7350
• Blade oil
• Cooling and cleaning spray for blades

ProBeauty tip. If the trimmer doesn't last long even though the battery is new, check the blade. Moser manuals state that if blade maintenance is neglected, the operating time can decrease significantly.

The Moser Li+Pro Mini Motor 1584-7050 is the replacement motor for the Moser Li+Pro Mini trimmer, type 1584. The code prefix, 1584, is the type for the Li+Pro Mini, Moser's corded or cordless trimmer. Replace it when the trimmer no longer starts, runs intermittently, or sounds much louder.

What it does for you

• Clean outlines again: a trimmer needs a motor that pulls consistently.
• Keep the trimmer you know: Moser describes it as very lightweight and quiet, good for fine work.
• Part for the trimmer type: the 1584 code prefix is the type for the Li+Pro Mini.
• Repair, not a new device: the blade, battery, and stand remain, if they are in good condition.

How to use it at home

1. Fully charge the trimmer and clean the blade; a stuck blade can mimic a faulty motor.
2. If it still doesn't work, take the trimmer and motor to an authorized service center.
3. After installation, put a drop of oil on the blade and run the trimmer for a few minutes.
4. Work with short breaks when cutting long hair, so the blade does not overheat.

For what type of device

For the Moser Li+Pro Mini trimmer, type 1584, with a Star Blade II blade. For the Li+Pro² Mini, Moser's list gives a different motor code. The code 1584-7050 does not appear in the list published by Moser, so check the type on the trimmer's label before ordering.

What else you need

• Blade oil
• Blade cooling and cleaning spray
• Haircutting cape

ProBeauty tip. The Moser manual says that a dirty and unlubricated blade significantly shortens the working time. The same blade also strains your motor. Lubricate it after every trim.

The Moser Genio Battery with Circuit 1565-7880 is the battery and electronic board assembly for the Moser Genio hair clipper. The Genio can be used corded or cordless, and the battery provides its cordless runtime. Replace it when the clipper no longer holds a charge or fails to charge at all.

What it does for you

• Cut hair cordlessly again: without a good battery, the Genio remains tethered to the wall outlet.
• One-piece battery and circuit: the service center replaces the entire assembly rather than searching for separate parts.
• Keep your lightweight clipper: Moser describes the Genio as extra-lightweight, making it worth repairing.
• Still works corded: until it is installed, you can continue working with the power supply plugged in.

How to use it at home

1. First, check the clipper's power supply and charging port; dirt on the contacts can also prevent charging.
2. Take the clipper and part to a service center; Moser requires that batteries be replaced only there.
3. After installation, fully charge the clipper before its first use.
4. Clean and lubricate the blade after each use to prevent unnecessary strain on the motor.

For which type of device

For the Moser Genio hair clipper, model 1565, the one with the Magic Blade. It is not for the Genio Plus, which has a different battery listed by Moser, 1854-7988. Code 1565-7880 does not appear in the parts list published by Moser, so check the model on the clipper's label before ordering.

What else you need

• Blade oil
• Blade cooling and cleaning spray
• Hair clipper cape

ProBeauty tip. Store the clipper at room temperature. Moser manuals state that it should not be exposed to extreme cold or high heat for extended periods. Do not leave it in the car during summer or near a heater.

Moser 1400 Complete Housing 1403-7010 is a replacement housing for the Moser 1400 series corded hair clipper. 1403 is the code Moser uses for the 1400 clipper parts in the official parts list. Replace it when the old housing is broken, cracked, or broken at the mounting points.

What it does for you

• The clipper is securely held again: no cracks and no edges that scratch you.
• The mechanism stays enclosed: hair and dust no longer enter through cracks to the coil.
• You don't replace the whole clipper: the blade, coil, and cable remain, if they are in good condition.
• And the switch is available: the Moser list gives the same switch for the 1400 as for the Primat, 1230-7071.

How to use it at home

1. Unplug the clipper and remove the blade.
2. Take a photo of the inside before moving the parts: coil, vibrator, springs, cable.
3. Move the parts into the new housing, in the same position.
4. Close the housing, mount the blade and lubricate it.
5. Turn the clipper on briefly; if it makes a loud noise, adjust the blade as shown in the manual or take it to a service center.

For what type of device

For the Moser 1400 corded hair clipper. The Moser manual covers types 1170, 1400, and 1411 together, but the parts list gives different housings for the 1400 and the 1400 Mini. Therefore, check the type on the clipper label before ordering.

What else you need

• Moser Primat Switch 1230-7071
• Blade oil
• Cooling and cleaning spray for blades
• Hair clipper cape

ProBeauty Tip. On the 1400 clippers, loud noise after assembly usually comes from the blade or its adjustment. The Moser manual explains the adjustment step by step; follow it before you think the part is to blame.

The Moser Class 50 12 V DC 1250-7070 motor is the replacement motor for the Moser Class 50 corded hair clipper. Moser's official parts list includes it for the Class/Max 50 model, type 1250, and the Class 50 manual specifies a 12 V DC motor. Replace it when the old motor no longer starts, overheats, or loses power.

What it does for you

• Your clipper cuts with power again: a new motor restores the power Moser describes for the Class 50.
• Keep the clipper you know: the Class 50 is made, according to Moser, for continuous professional use.
• The correct part number: 1250-7070 is the motor listed in the model's parts list.
• Repair instead of a new device: the housing, cable, and blade remain the same, provided they are in good condition.

How to use it at home

1. First, check the cable, power supply, and outlet: the Class 50 manual lists them as the primary cause when the clipper does not work.
2. Clean and lubricate the blade; a stuck blade strains the motor.
3. If it still does not work, take the clipper and new motor to an authorized service center.
4. After installation, oil the blade and run the clipper for a few minutes as a test.

For what type of device

For the Moser Class 50 corded hair clipper, type 1250, the one with the 49 mm Star Blade. Moser's list groups it with the Max 50 under the same type. It is not the motor for other Moser models, such as the Class 45, which lists a different motor.

Specifications

What else you need

• Blade oil
• Cooling and cleaning spray for blades
• Hair clipper cape

ProBeauty's tip. Motors fail more often when the blade is dull or unsharpened. Along with the motor, check the blade. If it pulls clean and lubricated hair without tugging, replace it too.

Moser Primat 2in1 Lower Housing 1234-7000 is the bottom part of the housing for the Moser Primat 2in1 corded hair clipper. The code 1234 is the Primat 2in1 type, according to the Moser data sheet and manual. Replace it when the lower housing is cracked or broken at the clips.

What it does for you

• The clipper stays securely in your hand: an intact housing no longer wobbles and has no sharp edges.
• The interior stays clean: hair and dust enter the motor through cracks.
• You don't have to replace the whole clipper: Moser describes the Primat 2in1 as a clipper for continuous professional use.
• Part for your clipper type: the 1234 prefix of the code is the same as your clipper type.

How to use it at home

1. Unplug the clipper and remove the blade.
2. Unscrew the screws and note which parts are in the lower housing.
3. Use the brush to clean the hair collected inside.
4. Move the parts into the new housing in the same position, and close the clipper without forcing the screws.
5. Put the blade back, lubricate it, and turn on the clipper for a test.

For what type of device

For the Moser Primat 2in1 corded hair clipper, type 1234, which comes with a standard blade and a fine one for outlining. Moser does not publish a parts list for this model, so check the type on the clipper label. We have no confirmation for the Primat 1230 or other models.

What else you need

• Moser Primat 1230-7590 Upper Housing
• Moser Primat 1230-7071 Switch
• Moser Primat 1230-7720 Blade Guide
• Moser Primat 1230-7730 Balancer
• Blade oil
• Blade cooling and cleaning spray

ProBeauty Tip. When replacing the housing, also clean the cable contacts at the entry. A cable properly secured in the housing does not break at the bends.

Moser Primat 1230 Switch 1230-7071 is the on/off button for the Moser Primat corded hair clipper. The official Moser parts list specifies it for the Primat 1230 and for the 1170 and 1400 clippers. Replace it when the clipper no longer starts reliably or turns off on its own from the button.

What it does for you

• The clipper starts right away: a new switch no longer has loose contacts.
• You work without interruptions: sudden shutdowns in the middle of cutting disappear.
• One part for three models: the same code is listed for the Primat 1230, the 1170, and the 1400.
• A minor repair, not a new clipper: the rest of the clipper remains the one you know.

How to use it at home

1. First, check the cable and the socket: a clipper that doesn't start doesn't always have a faulty switch.
2. Unplug the clipper and open the housing, with the blade removed.
3. Note down or photograph how the wires are connected to the old switch.
4. Mount the new switch in exactly the same position and close the housing.
5. If you haven't worked with electrical parts before, leave the installation to an authorized service center.

For what type of device

For the Moser Primat 1230 corded clipper and, according to the Moser parts list, for the Moser 1170 and 1400 clippers. It is not a part for cordless clippers. For another model, check the code on the clipper's label before ordering.

Specifications

What else you need

• Moser Primat 1230 Upper Housing 1230-7590
• Moser Primat 2in1 Lower Housing 1234-7000
• Moser Primat 1230 Blade Guide 1230-7720
• Moser Primat 1230 Balancer 1230-7730
• Blade Oil
• Blade Cooling and Cleaning Spray

ProBeauty Tip. Moser manuals state that electrical repairs should only be carried out by specialists using original parts. The switch involves live wires, so a service center is the safe choice.