Products

The Italwax Nirvana Kit for lavender hair removal brings together three products from the Nirvana SPA line in one box: a massage candle, a bag of stretchy pearl wax, and a pre-hair removal oil, all with a lavender scent. It is designed for aromatic oil-based hair removal, and the box makes it suitable as a gift. Meanwhile, Italwax has renamed the Vanira line, but our box says Nirvana.

What it does for you

• The entire hair removal ritual in one box, with products designed to work together.
• Skin prepared with oil: the pre-hair removal oil gently prepares the skin and leaves it feeling silky afterwards, says Italwax.
• Wax for sensitive skin, with a synthetic base and lavender oil.
• A warm massage at the end: the candle melts into an oil that you spread over the skin.
• A relaxing lavender scent, which can be smelled from the heater until the end.

How to use it at home

1. Light the massage candle before you start.
2. Melt the wax in the heater at 38 °C.
3. Cleanse the skin, massage in a little pre-hair removal oil, and wipe off the excess with a tissue.
4. Apply the wax in any direction, leave a "petal" at the end, and, after a few seconds, pull it off parallel to the skin.
5. Blow out the candle and massage the hair-removed skin with the warm melted oil.

For what skin type and area

For sensitive skin, on the underarms, bikini area, legs, arms, and back. It is not a face kit. The heater and spatulas are not in the box, so check that you have them before hair removal.

Active ingredients

• Lavender oil: in Nirvana wax, for fragrance and a relaxing effect, says Italwax.

What else you need

• Wax heater with an 800 ml container
• Wooden wax spatulas
• Italwax Nirvana pre-hair removal oil with lavender
• Italwax post-hair removal oil with lemon

ProBeauty tip. Keep the pre-hair removal oil after you finish the wax from the kit: you can also find it separately, with the same lavender scent, and use it with a new bag of Nirvana wax.

ItalWax Paraffin with Peach Scent 500ml

Paraffin is a cosmetic product that helps to deeply moisturize hands and feet. Due to its vitamin A and E content, paraffin nourishes and moisturizes the skin, delaying the aging process. Essential oils smooth and soften dry and tired skin. Oils and vitamins, combined with the thermal effect of paraffin treatment, moisturize even the most damaged skin. Pleasant and fruity peach scent. It is recommended for SPA manicure and pedicure procedures.

The application procedure is relatively simple, but a few steps must be followed for an excellent result. The temperature at which the paraffin will be applied to the body is 50-55 degrees, and the thickness of the applied layer is 0.5-1.5 cm.

Features:

-Deeply moisturizes

-Recommended for hands and feet

-Contains Vitamin A and E

-Delays the skin aging process

How to use: Preheat the paraffin in the paraffin heater to 50-55 °C. Wash the skin area where the paraffin will be applied, removing any dirt, perfume, oil, or body cream. For hand paraffin treatment, immerse hands one by one into a container of warm paraffin, allowing a film of paraffin to form around them. Wait a few minutes for it to take effect and become brittle and easy to remove. This procedure should be repeated 3-5 times until the paraffin layer is thick enough to maintain the same temperature. Additionally, for a stronger effect, wrap the treated area with plastic film and place it in a cotton towel glove. The treatment can last between 30 minutes and 2 hours, depending on the skin type and structure. At the end of the procedure, remove the hardened paraffin from the skin.

Weight: 500ml

Italwax Soft Sugar Paste 600 g is a soft-consistency paste created for cool, well-air-conditioned rooms. It is suitable for large areas such as the arms and legs. You can work it with your hands, gloves, or strips.

What it does for you

• Stays pliable in a cool room, where a harder paste would be difficult to spread.
• Two techniques: spread and pull it off with your hands or remove it with hair removal strips.
• Convenient to use with gloves, as recommended by the brand.
• Does not run or melt while working, although it is soft and pliable.
• Simple recipe: sugar, water, and cornstarch, without citric acid. Residues are washed off with water.

How to use it at home

1. Cleanse the skin with a pre-epilation lotion. If the skin is damp, apply a little talcum powder.
2. Put on your gloves and take a piece of paste.
3. Spread it against the direction of hair growth using gentle movements.
4. Smooth out the skin well and pull the paste off quickly in the direction of hair growth, parallel to the skin. If you are using strips, place the strip over the paste, press it down, and pull it off in the same way.
5. Touch the area with your free palm immediately after pulling.
6. Do not pass over the same area more than 3 times.

For what skin type and area

For large areas such as the arms and legs in a cool room. If the room is warm or you are working on damp areas, choose Strong. Italwax warns that sugar hair removal requires skill. Do not use it on skin with wounds or lesions. The brand lists diabetes as a contraindication.

Active ingredients

• Sugar and water: the base of the paste, along with cornstarch.
• Cornstarch: a natural absorbent that keeps the skin surface dry.

Specifications

What else you need

• Nitrile gloves, size M
• Hair removal strip roll
• Italwax cosmetic talcum powder
• Italwax Strong Sugar Paste 600 g
• Italwax Ultra Soft Sugar Paste 600 g

ProBeauty tip. If the paste starts to stick too strongly to the skin, apply a little talcum powder around the area. Then pull the paste over the powder and remove it in one motion.

Italwax Strong Sugar Paste 600 g is a medium-density paste for sugar waxing. Italwax created it for warm rooms and areas where the skin is warm and damp. You work it by hand.

What it does for you

• Made for heat: Italwax created it for warm rooms and the summer season.
• Works on warm and damp areas of the body, which is what the brand designed it for.
• Short recipe: only sugar, water, and cornstarch, without citric acid.
• Does not melt or run: the paste is plastic and soft, but keeps its shape during use.
• Residues come off with water, because the paste is water-soluble.

How to use it at home

1. Cleanse the skin with a pre-waxing lotion. If the skin is damp, apply a little talc.
2. Take a piece of paste and spread it against the direction of hair growth, using gentle movements.
3. Smooth the skin well with the other hand.
4. Pull the paste off in one quick motion, in the direction of hair growth, parallel to the skin.
5. Immediately touch the area with the free palm: Italwax says this dissipates the sensation of pain.
6. Do not pass over the same area more than 3 times.

For what type of skin and area

Italwax says it is suitable for any area, but it really shows its worth on warm and damp areas and in warm rooms during the summer. The brand warns that sugar waxing requires skill, so start with a small area. Do not use it on skin with lesions or growths. Italwax lists diabetes mellitus as a contraindication for sugar waxing.

Active ingredients

• Sugar and water: the "nothing extra" base of the paste's recipe.
• Cornstarch: a natural absorbent that keeps the skin surface dry.

Specifications

What else you need

• Italwax cosmetic talc powder
• Italwax Help Line antiperspirant powder
• Nitrile gloves, size M
• Italwax Soft Sugar Paste 600 g
• Italwax Ultra Soft Sugar Paste 600 g

ProBeauty's tip. If the paste seems too hard or too soft to you, mix it with another Italwax paste. The brand actually recommends this, depending on the warmth of the hands, the skin, and the room.

Italwax Ultra Soft Sugar Paste 600 g is the softest sugar paste in the Italwax range. It is made for the cold season and for large areas, such as the arms and legs. It is particularly suitable for dry skin.

What it does for you

• Start without preheating: the very soft consistency allows you to use it directly from the container.
• Designed for large areas: it is easy to work with a spatula on the arms and legs.
• Suitable for use with strips: spread the paste, place the strip over it, and pull it off.
• Suitable for dry skin, for which Italwax specially recommends it.
• Short recipe: sugar, water, and cornstarch, without citric acid. Residues are washed off with water.

How to use it at home

1. Cleanse the skin with a pre-hair removal lotion. If the skin is damp, apply a little talc powder.
2. Scoop out the paste with a spatula and spread it in a thin layer, against the direction of hair growth.
3. Place a strip over the paste and press it down firmly.
4. Stretch the skin and pull the strip off quickly, in the direction of hair growth, parallel to the skin.
5. Touch the area with your free palm immediately after pulling.
6. Do not return to the same area more than 3 times. Wipe off residues with a damp wipe.

For what skin type and area

For large areas, arms, and legs, particularly in winter and on dry skin. In a warm room it may become too soft: in that case, choose Strong. Italwax warns that sugar hair removal requires skill. Do not use it on skin with injuries or lesions. The brand lists diabetes mellitus as a contraindication.

Active ingredients

• Sugar and water: the base of the paste's short recipe.
• Cornstarch: a natural absorbent that keeps the skin surface dry.

Specifications

What else you need

• Wooden spatulas
• Hair removal strip roller
• Italwax cosmetic talc powder
• Italwax Soft Sugar Paste 600 g
• Italwax Strong Sugar Paste 600 g

ProBeauty tip. Keep the container closed between applications and always take the paste out with a clean spatula. This prevents hair or moisture from getting into the rest of the paste.

The brown Italwax pen is part of the brand's merchandising materials, along with pencils, catalogs, and posters. It is a small item, but you use it daily at the salon reception or on your desk at home. You can also give it as a gift to clients who come in regularly for hair removal.

What it does for you

• You always have a pen at hand when you write down appointments or complete a client's file.
• The salon looks cohesive: the pen has the same branding as the Italwax wax and products you use.
• A small gift for loyal clients: Italwax presents it as a small gift for clients and beauty therapists.
• It helps you keep track of hair removal treatments at home, if you write down the dates in a planner.

How to use it at home

1. Keep it near your planner or hair removal records, not on your work table.
2. At each hair removal treatment, write down the date, area, and wax used.
3. Also write down how the skin reacted, so you know what to change next time.
4. If you work in a salon, give it to the client when they sign the file or appointment form.

What it is best for

For the reception desk of a hair removal salon, for beauty therapists who work at home and keep paper records, and for anyone who writes down their hair removal schedule at home. It is a stationery item, unrelated to the procedure itself. It is not a cosmetic pencil and should not be used on the skin.

What else you need

• Italwax product catalog
• Italwax white glitter pencil
• Italwax salon poster
• Italwax equipment cleaning solution

ProBeauty tip. Keep a notebook just for hair removal and write in it after each session. In two or three months, you will clearly see how many weeks it takes for the hair to grow back in each area and you can schedule your hair removal treatments in advance.

Body Hair Removal Poster is a professional visual material specially created for cosmetic, hair removal, and beauty salons that want to clearly, elegantly, and premiumly convey the services offered ✨🧴 The poster contributes to efficient communication with clients, providing easy-to-understand visual information and reinforcing the professional image of the salon.

With a clean, modern design aligned with the Sensus identity, this poster is ideal for reception areas, treatment rooms, or waiting areas. It helps educate clients, increases trust in services, and supports the sale of hair removal treatments.

Key benefits
• Professional visual material for body hair removal
• Supports clear communication of salon services
• Premium design, consistent with the Sensus brand identity
• Ideal for reception, cabin, or waiting area
• Increases client confidence and perception of professionalism
• Effective tool for presenting and upselling services

Choose ItalWax Body Hair Removal Poster and give your salon an extra touch of clarity, elegance, and professional visual impact 💎🖼️

Italwax Pour Homme Barber Edition Elastic Wax Beads for the face is a synthetic wax that Italwax created for men's faces and beard contours. It is metallic petrol blue, fragrance-free, and catches the thick and coarse hairs on the face. It pulls off without bands.

What it does for you

• Precise beard contour. Italwax is for the beard, mustache, eyebrows, sideburns, and the clear hairline.
• Catches the thick and coarse hairs on men's faces, thanks to its increased adhesion.
• Spreads in a thin film and removes short hairs with minimal discomfort, says the manufacturer.
• Fragrance-free, based on synthetic polymers.
• You work at 38–40 °C, a low temperature, suitable for the face and neck.

How to use it at home

1. Heat the wax in the heater to 38–40 °C.
2. Cleanse the area with a pre-epilation lotion and apply a little talc.
3. Take a little wax with a narrow spatula and apply it regardless of the direction of the hairs, pressing firmly.
4. Bring the end of the strip towards the area with fewer hairs and lift it gently, so you can catch it.
5. Check if the wax has hardened, secure the skin and pull quickly, in the opposite direction of application.
6. Move on to the next section, then soothe the skin with a post-epilation product.

For what skin type and area

For men's face and neck: beard contour, mustache, eyebrows, sideburns, and neck. Italwax calls it a hypoallergenic synthetic wax. It is not designed for the chest or back: there you use Pour Homme for the body or Full Body.

Specifications

What else you need

• Wax heater with an 800 ml container
• Wooden wax spatulas
• Italwax talc powder, small format
• Italwax post-epilation lotion with azulene
• Italwax post-epilation oil with menthol

ProBeauty tip. Draw the beard contour first by looking in the mirror, on both sides, before the first strip. A line pulled too high cannot be corrected until the hair grows back.

Italwax Cosmetic Talc Powder 150 g is a fine, highly purified talc for preparing the skin before hair removal. Use it with pearl elastic wax, hot wax, and sugar paste. It contains no zinc oxide or starch.

What it does for you

• Keeps skin dry: the talc quickly absorbs moisture from the area.
• Wax adheres better, making hair removal more effective.
• No zinc oxide: Italwax says it does not irritate the skin.
• Does not clump on damp skin and is easy to remove without leaving a residue.
• Use it at any stage: before, during, and after hair removal.

How to use it at home

1. Cleanse the skin with a pre-hair removal lotion or foam and let it dry.
2. Apply a little talc to the area to be treated.
3. Spread it evenly with the palm of your hand.
4. Apply the wax or sugar paste.
5. If the skin starts to sweat during the process, apply a little more talc.

For what skin type and area

For the whole body. Italwax especially recommends it for delicate areas where the skin needs to be dried quickly during hair removal. If you sweat a lot, such as under the arms, the Help Line antiperspirant powder is specially designed for this.

Active ingredients

• Fine cosmetic talc: absorbs moisture and helps the wax grip the hair.

Specifications

What else you need

• Italwax Strong Sugar Paste 600 g
• Italwax Natural Pearl Elastic Wax
• Italwax Natural Hot Wax Cartridge
• Italwax Top Line Pre-Hair Removal Foam with Lime
• Italwax After-Hair Removal Oil with Lemon

ProBeauty Tip. When using sugar paste, talc is a lifesaver when the paste sticks. Dust a little around the stuck area, pull the paste over the talc, and remove it quickly.

Italwax Selfie Elastic Wax Beads for the face is the pink wax that Italwax created for delicate facial skin. It has a synthetic base, without pine resin, and a complex of natural oils that protects the skin during hair removal. It is worked at 38 °C and is pulled off without strips.

What it does for you

• Clean eyebrows, upper lip and sideburns, because it is designed exactly for these areas.
• It does not burn and does not hurt thin skin, says Italwax, and does not leave redness even on light-colored skin.
• Extra protection thanks to the complex of natural oils in the formula.
• Removes hairs of any length and thickness from the face.
• Fragrance-free, so nothing extra on the sensitive skin of the face.

How to use it at home

1. Heat the wax to 38–40 °C.
2. Clean the area with a pre-hair removal lotion and apply a little talc.
3. Eyebrows: small spatula, short strips, pressed firmly. Upper lip: hold the upper lip over the teeth so the skin is stretched and the spatula perpendicular to the skin.
4. Sideburns: for longer hairs apply in the direction of growth and pull off in the opposite direction.
5. Lift the end of the strip slightly, wait for it to harden, hold the skin and pull quickly, in the opposite direction of application.
6. At the end, soothe the skin with an after-hair removal product.

For what type of skin and area

For the face, on sensitive and thin skin: eyebrows, above the upper lip, sideburns and temples. It is not designed for the body; for underarms or legs choose a Top Line or Full Body wax. For the beard and men's face, Italwax has Pour Homme Barber Edition.

Active ingredients

• Complex of natural oils: according to Italwax, it softens the effect of the wax on the face and provides comfort during hair removal.

Specifications

What else you need

• Wax heater with 800 ml container
• Wooden wax spatulas
• Italwax talc powder, small format
• Italwax after-hair removal lotion with azulene

ProBeauty tip. On the face you work with small quantities, so the 100 g bag is good to start with. Take 500 g if you regularly remove hair from the face or for several people in the household.

Italwax Wax Equipment Cleaner 500 ml is the brand's spray for wax and paraffin residue. Use it on the heater, spatulas, and work surface, not on the skin. You'll find it on the bottle as "Wax Equipment Cleaner".

What it does for you

• The heater stays clean: Italwax made it to remove wax left on heaters and hair removal tools.
• It also works on paraffin: the brand recommends it for wax and paraffin residue.
• Spatulas and beauty beds are easy to clean, as are other surfaces where wax has dripped.
• Apply quickly: the bottle has a spray nozzle, so you can reach the edges.
• Keep it by the heater: a 500 ml bottle, ready to use after every hair removal treatment.

How to use it at home

1. At the end, unplug the heater. Italwax requires the device to be disconnected after use.
2. Spray as much as needed on wax or paraffin residue on the heater, spatula, bed, or table.
3. Wipe away the residue with a wipe, as recommended by Italwax.
4. Pay special attention to the edge of the heater and the lid. Italwax says that wax left there makes the lid difficult to remove next time.
5. Do not scrape off hardened wax with sharp objects: Italwax heater instructions forbid this.

For what type of work

For those who frequently perform hot wax or hard wax pearl hair removal, or apply paraffin wraps, and have their own heater. It is a product for equipment and tools, not for the skin. Remove wax residue from the skin with an oil or lotion after hair removal.

Specifications

What else you need

• 800 ml wax heater
• Wooden wax spatulas
• Protective paper for wax heater
• Disposable towels
• Italwax after-hair removal oil with lemon
• Italwax peach paraffin

ProBeauty tip. Clean the heater after every hair removal treatment, even when the wax layer is thin. An old layer, built up over weeks, is much harder to remove than today's drips.

Italwax Top Line Argan Elastic Wax Beads 100 g is a yellow synthetic wax with argan oil, from the line for sensitive skin. When melted, it becomes completely transparent and has a gel consistency. The 100 g bag is good for trying the wax or for small areas.

What it does for you

• Good grip on all hair types, including short and coarse ones, says Italwax.
• Lightly nourishing effect, thanks to the argan oil in the formula.
• See the hairs through the wax, as it is transparent when spread.
• Spreads in large strips without breaking, for legs, arms, or back.
• No pine resin, for skin that is prone to allergies.

How to use it at home

1. Heat the wax to 38 °C.
2. Degrease the skin with a pre-epilation foam and lightly powder with talc.
3. Spread a thin layer with a spatula, regardless of the direction of the hairs.
4. Leave a gripping edge and press the spatula down well.
5. When the wax no longer sticks to the touch, stretch the skin and pull off quickly, parallel to it.
6. Finish with an after-epilation lotion.

For what type of skin and area

For sensitive, dry, or easily reddened skin, according to the Italwax catalog. It works on the underarms, groin area, and body: legs, arms, back, abdomen, chest. The catalog also lists it for the face, but on the face, work with small strips.

Active ingredients

• Argan oil: according to Italwax, it gives the wax a lightly nourishing effect on the skin.
• Synthetic base, without pine resin: like the entire Top Line line, for skin prone to allergies.

Specifications

What else you need

• Wax heater with 800 ml container
• Wooden wax spatulas
• Italwax Top Line pre-epilation foam with lime
• Italwax talc powder, small format
• Italwax after-epilation lotion with azulene

ProBeauty tip. With the 100 g bag, first do a test on a small area, for example, an underarm. See how your skin reacts to the Top Line wax before using it on your whole body.

Italwax Top Line Elastic Wax Pearls Coral is an orange, creamy synthetic wax from the line for sensitive skin. It has a very strong grip on thick hair and hair grown back after shaving, so it is easy to work with even if you are just learning. It is used at 38°C, without strips.

What it does for you

• Grips thick and shaved hair thanks to its very strong adhesion, says Italwax.
• Easy to use, even if you are a beginner, because it is creamy and easy to apply.
• Good for the bikini area, where the hair is thickest.
• Gentle on the face: the manufacturer says it does not leave redness even on thin, fair skin.
• No pine resin and no fragrance, for sensitive skin.

How to use it at home

1. Heat the wax to 38°C.
2. Degrease the skin with a pre-epilation foam and powder with a little talc.
3. Spread the wax with a spatula in any direction towards you, and form a "petal" at the end.
4. Press the spatula down firmly so that the thick hair is completely enveloped in the wax.
5. When the wax is no longer sticky, stretch the skin and pull off quickly, parallel to the skin.
6. Apply an after-wax lotion at the end.

For what skin type and area

For sensitive or allergy-prone skin: the bikini area, underarms, face, and legs or arms. Italwax also recommends it for beginners. If you want something even gentler for the face and have a steady hand, check out Cristal.

Active ingredients

• Synthetic base, without pine resin: Italwax makes Top Line wax from synthetic polymers (hydrogenated polycyclopentadiene), without the pine resin that can irritate allergy-prone skin.

Specifications

What else you need

• Wax heater with 800 ml container
• Wooden wax spatulas
• Italwax Top Line Formula pre-epilation foam with lemon
• Italwax talc powder for before epilation
• Italwax after-wax lotion with azulene

ProBeauty tip. If you have shaved, wait a few days before epilating. Coral grips short hair grown back after shaving well, but it must protrude slightly from the skin for the wax to catch it.

Italwax Top Line Crystal Pearl Elastic Wax is a pearl-white synthetic wax from the Top Line range, designed for sensitive skin. Italwax describes it as the gentlest in the range and highly recommends it for the face. It is used at 38°C and can be removed without strips.

What it does for you

• Epilate the face and allergy-prone skin with a wax free from pine resin and fragrance.
• Low temperature: 38°C, so it does not overheat delicate skin.
• Grips very short hairs, from 1 mm, and coarse hairs, says Italwax.
• Does not break when removed, even when spread over a large area, because it is highly elastic.
• Also suitable for legs and arms, not just small areas.

How to use it at home

1. Heat the wax in the wax heater to 38°C.
2. Degrease the skin with a pre-epilation foam or lotion and apply a little talcum powder.
3. Spread the wax with a spatula in any direction towards you, leaving a border to grip.
4. Press the spatula firmly and steadily.
5. When it no longer sticks to the touch, stretch the skin and remove it quickly, parallel to the skin.
6. Soothe the skin with an oil-free post-epilation product.

For which skin type and area

For sensitive and allergy-prone skin: the face, underarms, and bikini area, and with large strips for legs or arms. The Italwax catalogue recommends it for experienced users. If you are just starting out, Coral, also from Top Line, is easier to work with.

Active ingredients

• Synthetic base, free from pine resin: Italwax makes Top Line wax from synthetic polymers (hydrogenated polycyclopentadiene), without the pine resin that can irritate allergy-prone skin.

Specifications

What else you need

• Wax heater with 800 ml container
• Wooden wax spatulas
• Italwax Top Line pre-epilation foam with lime
• Italwax talcum powder for pre-epilation
• Italwax post-epilation lotion with azulene

ProBeauty tip. Close the zip-lock bag tightly after each use. Italwax chose it to keep dust out of the pearls, and a facial wax must stay clean.

Italwax Top Line Emerald Elastic Wax Beads is an emerald green, semi-transparent, glittery synthetic wax from the line for sensitive skin. Italwax describes it as the most elastic in the Top Line range: it spreads very thinly and is designed for the legs and arms. It is used at 38°C, without strips.

What it does for you

• Easily covers the legs and arms, as it spreads in large strips without breaking.
• You use less: being very elastic, it works in very thin layers.
• Removes short and coarse hairs from the root, without sticking to the skin, says Italwax.
• For sensitive skin: it is synthetic, fragrance-free, and pine resin-free.
• Also suitable for the underarms and bikini area, not just for large areas.

How to use it at home

1. Heat the wax to 38°C.
2. Degrease the skin with a pre-epilation foam and apply a little talc.
3. Spread the wax very thinly with a spatula, in any direction, in long strips.
4. Leave a small "petal" at the end to hold onto.
5. When it no longer sticks to the touch, stretch the skin and pull off quickly, parallel to it.
6. Finally, moisturize the skin with a post-epilation product.

For what skin type and area

For sensitive or allergic skin, preferably on large areas: legs, arms. Italwax also recommends it for the underarms and bikini area. For the face, Top Line has more suitable variants, such as Cristal or Pink Pearl.

Active ingredients

• Synthetic base, without pine resin: Italwax makes Top Line wax from synthetic polymers (hydrogenated polycyclopentadiene), without the pine resin that can irritate allergic skin.

Specifications

What else you need

• Wax heater with 800 ml container
• Wooden wax spatulas
• Italwax Top Line pre-epilation foam with lime
• Italwax talc powder for before epilation
• Italwax post-epilation lotion with azulene

ProBeauty tip. On the calf, work in long and thin strips: spread the wax towards you, then hold the skin taut with the other hand and pull off in the opposite direction, parallel to the skin.

Italwax Top Line Orchid Elastic Wax Beads is a lilac synthetic wax with a delicate orchid fragrance, from the line for sensitive skin. When melted, it is transparent and has a gel consistency, so you can see the hairs through it. It is worked at 38 °C and is pulled off without bands.

What it does for you

• See every hair through the wax, because it is transparent when you spread it.
• Removes hair of any thickness and length, says Italwax.
• Gentle on thin skin: the manufacturer says it does not cause redness.
• Smells nice, like orchid, while you work.
• Sets matte, so you can easily see when it is ready to pull off.

How to use it at home

1. Heat the wax to 38 °C.
2. Degrease the area with a pre-epilation foam and apply a dusting of talc.
3. Spread the wax with a spatula, regardless of the direction of the hairs, towards you.
4. Look through the transparent layer: if you see uncovered hairs, press the spatula over them again.
5. When the wax becomes matte and no longer sticks, stretch the skin and pull it off quickly, parallel to it.
6. Finally, apply an after-epilation lotion.

For what skin type and area

The Italwax catalog recommends it for the underarms and bikini area, on sensitive or allergic skin. It is also used on the legs and arms. It is scented, so if your skin reacts to fragrances, choose a fragrance-free Top Line wax.

Active ingredients

• Synthetic base, without pine resin: Italwax makes Top Line wax from synthetic polymers (hydrogenated polycyclopentadiene), without the pine resin that can irritate allergic skin.

Specifications

What else you need

• Wax heater with 800 ml container
• Wooden wax spatulas
• Italwax Top Line pre-epilation foam with lime
• Italwax talc powder for before epilation
• Italwax after-epilation lotion with azulene

ProBeauty tip. Use the color change as a signal: as long as the wax is shiny, wait a little longer. When it becomes matte and no longer sticks to the touch, it is time to pull it off.

Italwax Top Line Elastic Wax Beads Pink is a glossy, semi-creamy pink synthetic wax from the Top Line range for sensitive skin. Italwax recommends it especially for the face: it removes thick hair from the first application and is gentle on the skin. It is used at 38°C and does not require strips.

What it does for you

• Removes thick hair from the first application, according to Italwax, without having to work over the same area repeatedly.
• Gentle on facial skin, as it is synthetic and contains no pine resin or fragrance.
• Grips the hair well, while its warmth softens the skin, allowing the hair to be removed easily.
• Low working temperature of 38°C, suitable for delicate areas.
• Also suitable for large areas, such as the legs and arms, according to the manufacturer.

How to use it at home

1. Heat the wax to 38°C.
2. Cleanse the skin with a pre-epilation foam or lotion and apply a little talcum powder.
3. Spread the wax with a spatula in any direction, regardless of the direction of hair growth, leaving a small border to grip.
4. Press the spatula firmly so that all the hair is covered by the wax.
5. When it no longer feels sticky to the touch, stretch the skin and pull the wax off quickly, parallel to the skin.
6. Soothe the skin with an after-epilation lotion.

Suitable skin types and areas

Suitable for sensitive or allergy-prone skin, especially on the face, but also for the underarms and bikini area. It can be used on large areas, although Emerald is more economical for the legs. For normal skin, Italwax offers the Classic range.

Active ingredients

• Synthetic base, without pine resin: Italwax makes Top Line wax from synthetic polymers (hydrogenated polycyclopentadiene), without the pine resin that can irritate allergy-prone skin.

Specifications

What else you need

• Wax heater with 800 ml container
• Wooden wax spatulas
• Italwax Top Line pre-epilation foam with lime
• Italwax talcum powder, small size
• Italwax after-epilation lotion with allantoïn

ProBeauty tip. When working on the chin and jawline, use strips no wider than a finger. The skin in this area moves a lot, and a short strip makes it easier to keep taut when pulling the wax off.

ItalWax Top Line Argan Cartridge Wax 100ml

The premium quality ItalWax Top Line Argan 100ml synthetic polymer cartridge wax (SP Wax) is designed for hair removal from delicate areas (bikini, face, armpits). The wax does not contain natural pine resin and therefore does not cause allergies. This type of wax ensures perfect adhesion to the hair and is used with depilatory strips. It is clearly visible on the skin with a very pleasant, relaxing scent. Applied in a thin layer, it effectively removes all hair from any part of the body. Due to its high adhesiveness, hairs are quickly caught in the wax film, making epilation much faster and more efficient. It leaves the skin smooth and soft, without that unpleasant sticky feeling after use. For healthy skin and successful epilation, we recommend using pre- and post-epilation products from the ItalWax range. ItalWax products are made from carefully selected ingredients and feature a wide range of professional products that cover all professional epilation needs. These products can be used both in beauty salons and at home.

Features:

-Used with depilatory strips

-Disposable cartridge wax with wide applicator

-Recommended for medium and short hair

-Ideal for delicate areas (bikini, face, armpits)

-Suitable for all skin types, including sensitive

-Perfectly molds to the skin

-Very low melting temperature (37-39 ° C)

-Very pleasant and relaxing scent

How to use:

-Use disposable gloves.

-Heat the wax in the wax heater to a temperature of 37-39 ° C.

-It is recommended to apply in a thin layer.

-The wax is ready for application when it reaches the consistency of melted honey.

-Apply a thin layer of wax to the desired area using the built-in roller applicator.

-Apply the depilatory strip over the wax spread on the skin, leaving space to grip.

-Wait a few seconds for the wax to harden.

-Hold and stretch the skin in the opposite direction of removal.

-Remove the depilatory strip with a sudden movement, parallel to the skin.

-If necessary, repeat the procedure.

For a complete procedure and healthy skin, we recommend using pre- and post-epilation products.

Weight: 100g

ItalWax Top Line Coral Cartridge Wax 100ml

ItalWax premium quality Top Line Coral 100 ml synthetic polymer roll-on wax (SP Wax) is designed for hair removal from delicate areas (bikini, face, armpits). The wax does not contain natural resin and therefore does not cause allergies, making it suitable for sensitive skin. This type of wax ensures perfect adherence to the hair and is used with waxing strips. It is transparent but clearly visible on the skin with a very pleasant, relaxing scent. Applied in a thin layer, it efficiently removes all hairs from any body surface. Due to its high adhesiveness, hairs are quickly trapped in the wax film, making epilation much faster and more efficient. It leaves the skin smooth and soft, without that unpleasant sticky sensation after use. For healthy skin and successful epilation, we recommend using pre- and post-epilation products from the ItalWax range. ItalWax products are created from carefully selected ingredients and feature a wide range of professional products that cover all professional epilation needs. These products can be used both in beauty salons and at home.

Features:

-Used with waxing strips

-Single-use roll-on wax with wide applicator

-Recommended for medium and short hair

-Ideal for delicate areas (bikini, face, armpits)

-Suitable for all skin types, including sensitive

-Molds perfectly

-Very low melting temperature (37-39 ° C)

-Very pleasant and relaxing scent

How to use:

-Use disposable gloves.

-Heat the wax in the wax heater to a temperature of 37-39 ° C.

-It is recommended to use a thin layer

-The wax is ready for application when it reaches the consistency of melted honey.

-Apply a thin layer of wax to the desired area using the built-in roll-on applicator

-Apply the waxing strip to the waxed skin, leaving room to grip.

-Wait a few seconds for the wax to set.

-Stretch and hold the skin taut in the opposite direction of removal.

-Remove the waxing strip with a quick motion, parallel to the skin.

-Repeat the procedure if necessary.

For a complete procedure and healthy skin, we recommend using pre- and post-epilation products.

Weight: 100Gr

Discover a new era of hair removal with ITALWAX TOP LINE EMERALD, a premium synthetic polymer wax, meticulously crafted to deliver unparalleled results. This innovative formula combines cutting-edge technology with the finest ingredients to ensure a smooth and efficient hair removal process. Say goodbye to stubborn hairs, as this wax effortlessly adheres even to the shortest pre-shaved hairs on your arms and legs, leaving your skin irresistibly smooth and hair-free.
Gentle Care for Sensitive Skin Formulated with the utmost care for sensitive skin, this wax is a testament to Italwax's commitment to providing skincare solutions for everyone. Created without natural resins, it offers a soothing and comfortable hair removal experience, without causing irritation or discomfort.
Comfort and Convenience: Its semi-transparent formula ensures precise application, allowing for effortless removal of unwanted hair. Say goodbye to unpleasant odors, as this fragrance-free wax transforms your hair removal routine into a luxurious and pleasant experience. With the ability to be easily removed using suitable strips, ITALWAX TOP LINE EMERALD redefines convenience, making hair removal a seamless part of your beauty regimen.
Features:
-Used with waxing strips
-Disposable wax cartridge with a wide applicator
-Recommended for sensitive skin
-Ideal for arms and legs
-Perfectly molds
-Very low melting point (37-39 ° C)
-Very pleasant and relaxing scent
How to use:
-Use disposable gloves.
-Heat the wax in the wax heater to a temperature of 37-39 ° C.
-It is recommended to apply in a thin layer
-The wax is ready for application when it reaches the consistency of melted honey.
-Apply a thin layer of wax to the desired area using the built-in roller applicator
-Apply the depilatory strip to the wax spread on the skin, leaving space for gripping.
-Wait a few seconds for the wax to harden.
-Pre-tension and hold the skin in the opposite direction of the tear.
-Remove the waxing strip with a sharp motion, parallel to the skin.
-If necessary, repeat the procedure.
For a complete procedure and healthy skin, we recommend using pre- and post-waxing products.

Italwax Top Line Magnolia Roll-On Wax Cartridge 100 ml is a warm hybrid wax that is soft and creamy, with a delicate floral fragrance. It is part of the sensitive skin line and removes hairs of any thickness, from 1 mm. It is easy to remove from the skin without leaving a sticky residue.

What it does for you

• Skin remains clean after waxing: Italwax says the wax does not leave a sticky residue.
• Spreads smoothly thanks to its fine, creamy texture.
• Removes short hairs, from 1 mm, as well as medium or thick hair.
• Designed for sensitive skin, with a synthetic base and no pine resin.
• Hair removal smells like flowers: the wax contains essential oil.

How to use it at home

1. Place the cartridge in the 100 ml cartridge heater and let it warm up.
2. Degrease the area with a pre-waxing product and apply a thin layer of talc.
3. Test the wax on a strip with the cartridge still in the heater.
4. For fine or medium hairs, roll on a thin layer in the direction of hair growth.
5. Immediately apply the strip, leaving one end free, and press it firmly in place, against the direction of hair growth, parallel to the skin.
6. For short hairs, apply a thick layer and wait a few seconds before pulling off the strip.
7. Finish with an after-waxing oil or lotion.

For what skin type and area

Italwax recommends it for all skin types and all hair types. It is suitable for large areas: legs, arms, and back. Contraindications, according to Italwax: varicose veins and acute or chronic skin conditions in the area to be waxed.

Active ingredients

• Synthetic polymers (SP wax): the main ingredient in Top Line waxes, replacing pine resin.
• Essential oil: gives a delicate magnolia fragrance.

Specifications

What else you need

• Heater for one 100 ml cartridge
• Heater for three 100 ml cartridges
• Paper roll for waxing strips
• Italwax Top Line Pre-Waxing Foam
• Italwax Talc for Waxing
• Italwax After-Waxing Oil with Menthol

ProBeauty tip. On calves with fine hair, work in thin strips and pull off the strip immediately. The soft texture of the wax spreads easily into a thin layer.

ItalWax Top Line Orchid Cartridge Wax 100ml

ItalWax premium quality Top Line Orchid 100ml synthetic polymer cartridge wax (SP Wax) is designed for hair removal from any body area and for any hair type. The wax does not contain natural resin and therefore does not cause allergies. This type of wax ensures perfect adhesion to the hair and is used with depilatory strips. It is a transparent wax, but clearly visible on the skin with a very pleasant, relaxing scent. Applied in a thin layer, it effectively removes all hairs from any body surface. Due to its high adhesiveness, hairs are quickly caught in the wax film, making epilation much faster and more efficient. It leaves the skin smooth and soft, without that unpleasant sticky sensation after use. For healthy skin and successful epilation, we recommend using pre- and post-epilation products from the ItalWax range. ItalWax products are created from carefully selected ingredients and with a wide range of professional products that cover all professional epilation needs. These products can be used both in beauty salons and at home.

Features:

-Used with depilatory strips

-Disposable cartridge wax with wide applicator

-Recommended for all hair types, from fine to coarse

-Ideal for any body area

-Suitable for all skin types, including sensitive

-Conforms perfectly

-Very low melting temperature (37-39 ° C)

-Very pleasant and relaxing scent

How to use:

-Use disposable gloves.

-Heat the wax in the wax warmer to a temperature of 37-39 ° C.

-It is recommended to use in a thin layer

-The wax is ready for application when it reaches the consistency of melted honey.

-Apply the wax in a thin layer on the desired area using the built-in roller applicator

-Apply the depilatory strip on the wax spread on the skin, leaving space for gripping.

-Wait a few seconds for the wax to harden.

-Pre-tension and hold the skin in the opposite direction of removal.

-Remove the depilatory strip with a sudden movement, parallel to the skin.

-If necessary, repeat the procedure.

For a complete procedure and healthy skin, we recommend using pre- and post-epilation products.

Weight: 100Gr

ItalWax Top Line Pearl Cartridge Wax 100ml

The premium quality synthetic liposoluble depilatory wax in a Top Line Pearl 100 ml cartridge from ItalWax (SP Wax) is designed for hair removal from any body area and for any hair type. The wax does not contain natural resin and therefore does not cause allergies. This type of wax ensures perfect adherence to the hair and is used with depilatory strips. It is a non-transparent white wax, clearly visible on the skin, with a very pleasant, relaxing scent. Applied in a thin layer, it efficiently removes all hair from any body surface. Due to its high adhesiveness, hairs are quickly trapped in the wax film, making epilation much faster and more efficient. It leaves the skin smooth and soft, without that unpleasant sticky sensation after use. For healthy skin and successful epilation, we recommend using pre- and post-epilation products from the ItalWax range. ItalWax products are created from carefully selected ingredients and offer a wide range of professional products that cover all needs for professional epilation. These products can be used in beauty salons as well as at home.

Features:

-Used with depilatory strips

-Disposable cartridge wax with wide applicator

-Recommended for all hair types, from fine to thick

-Ideal for any body area

-Suitable for all skin types, including sensitive

-Molds perfectly

-Very low melting temperature (37-39°C)

-Very pleasant and relaxing scent

How to use:

-Use disposable gloves.

-Heat the wax in the wax heater to a temperature of 37-39°C.

-It is recommended to apply in a thin layer

-The wax is ready for application when it reaches the consistency of melted honey.

-Apply the wax in a thin layer to the desired area using the built-in roller applicator

-Apply the depilatory strip to the wax spread on the skin, leaving space for gripping.

-Wait a few seconds for the wax to harden.

-Pre-stretch and fix the skin in the opposite direction of removal.

-Remove the depilatory strip with a brisk movement, parallel to the skin.

-If necessary, repeat the procedure.

For a complete procedure and healthy skin, we recommend using pre- and post-epilation products.

Weight: 100Gr

Italwax Top Line Lime Pre-Epilation Foam 200 ml cleanses and prepares the skin for waxing. It is part of the Top Line range, created for sensitive skin. It has a foam texture and a fresh citrus scent.

What it does for you

• Wax adheres better to the hair: the foam degreases the skin and leaves it slightly dry.
• Gently removes traces of makeup and sebum from the area to be waxed.
• Suitable for delicate areas: underarms, the bikini line, as well as legs and arms.
• Low consumption: the foam texture spreads easily over large areas.
• Leaves the skin feeling fresh and soft, with a light lime scent.

How to use it at home

1. Pump out enough foam for the area to be waxed.
2. Apply to the skin using light, massaging motions.
3. Wipe off any excess with a tissue and allow the skin to dry.
4. Apply hot wax or Italwax Top Line Emerald Hard Wax Beads.

For which skin type and area

For all skin types, including sensitive skin, and for the whole body. Italwax recommends it before hot wax and Italwax Top Line Emerald Hard Wax Beads. For large areas, you can also use the pre-epilation lotion with aloe vera.

Active ingredients

• Lime extract: provides the fresh citrus scent.

Specifications

What else you need

• Italwax Top Line Emerald Hard Wax Beads
• Italwax Top Line Argan Wax Cartridge
• Italwax Cosmetic Talc Powder
• Italwax After-Wax Lotion with Azulene
• Wax Heater for Wax Boxes and Beads

ProBeauty Tip. The skin under the arms sweats quickly. Apply the foam, wipe it off, then apply a little talc powder just before waxing to keep the area dry.

ItalWax Lemon Post-Epilation Oil

This post-epilation oil has a cleansing, hydrating, and soothing effect, enriched with lemon essential oil and Vitamins A, B, P, C. The lemon essential oil extract contains various organic acids: citric, malic, and ascorbic. The post-epilation oil completes the epilation process, improving the skin's appearance after waxing. Lemon post-epilation oil helps remove wax residues and eliminates the sticky sensation that can occur after waxing.

Features:

-Cleanses the skin of sticky wax residues after the procedure

-Hydrates

-Soothes

-Carefully selected ingredients

How to use: Spray the oil directly onto the depilated skin and gently massage into the skin to cleanse the depilated skin of sticky wax residues and soothe irritated skin.

ItalWax Post-Epilation Oil with Menthol

This is a post-epilation oil with cleansing, moisturizing, and soothing/cooling effects, enriched with peppermint essential oil. Menthol reduces painful reactions, diminishes inflammation, and lowers local temperature. The post-epilation oil completes the depilation process, improving the skin's appearance after waxing. The Post-Epilation Oil with Menthol helps remove wax residues and eliminates the sticky sensation that can occur after waxing.

Features:

-Cleanses the skin of sticky wax residues after the procedure

-Cooling/fresh effect

-Moisturizes

-Soothes

-Carefully selected ingredients

How to use: Apply to waxed skin and gently massage into the skin to cleanse the waxed skin of sticky wax residues and soothe irritated skin.

The Jaguar A-Line 500 Straight Cutting Comb is the classic cutting comb from the A-Line series. It is 18.4 cm long and has two tooth zones: one with wider teeth and one with closer teeth. It is also part of the A-Line 9-comb set.

What it does for you

• Lift and stretch the section with the same tool: the wide-tooth side for thick or long hair, the close-tooth side for fine lines.
• Straight cuts, because the comb is straight along its entire length and keeps the section stretched.
• Strands do not lift after the comb: the A-Line series is antistatic.
• Gentle on the scalp, thanks to the rounded-tip teeth.
• Heat and chemical resistant, so you can use it for both drying and coloring.

How to use it at home

1. Wash the hair and leave it damp. First, detangle it with the wide-tooth side.
2. Divide the hair into sections and secure them with clips.
3. Lift the section with the wide-tooth side, then stretch it with the close-tooth side.
4. Hold the section between your fingers and cut above them, not on the comb.
5. Check the length on the other side of the head, using the same guide section.

For what type of hair and haircuts

For scissor cuts on short, medium, or long hair: bobs, bangs, ends, layers. If you often cut short nape hair, also check out the A-Line 505, which narrows toward the tip and fits more easily close to the skin.

Specifications

What else you need

• Jaguar Pre Style Ergo 5.5 inch Cutting Scissors
• Jaguar A-Line 525 Cutting Comb, close teeth
• Jaguar A-Line Black 9-Comb Set
• Sectioning Clips, set of 6
• Olivia Garden Scissors Oil

ProBeauty Tip. Keep the comb parallel to the line you want to cut. If you tilt it, the cut will also be angled, which is even better for bangs.